Merge tag 'regulator-fix-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "The main set of fixes here are for the PWM regulator, fixing
  bootstrapping issues on some platforms where the hardware setup looked
  like it was out of spec for the constraints we have for the regulator
  causing us to make spurious and unhelpful changes to try to bring
  things in line with the constraints.

  There's also a couple of other driver specific fixes"

* tag 'regulator-fix-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator (max5970): Fix IRQ handler
  regulator: ti-abb: don't use devm_platform_ioremap_resource_byname for shared interrupt register
  regulator: pwm-regulator: Manage boot-on with disabled PWM channels
  regulator: pwm-regulator: Calculate the output voltage for disabled PWMs
  regulator: pwm-regulator: Add validity checks in continuous .get_voltage

Pull crypto fixes from Herbert Xu:
 "Fix regressions in caam and qat"

* tag 'v6.8-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: caam - fix asynchronous hash
  crypto: qat - fix arbiter mapping generation algorithm for QAT 402xx

Pull lsm fixes from Paul Moore:
 "Two small patches to fix some problems relating to LSM hook return
  values and how the individual LSMs interact"

* tag 'lsm-pr-20240131' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
  lsm: fix default return value of the socket_getpeersec_*() hooks
  lsm: fix the logic in security_inode_getsecctx()

Pull SCSI fixes from James Bottomley:
 "Six small fixes. Five are obvious and in drivers. The last one is a
  core fix to remove the host lock acquisition and release, caused by a
  dynamic check of host_busy, in the error handling loop which has been
  reported to cause lockups"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: storvsc: Fix ring buffer size calculation
  scsi: core: Move scsi_host_busy() out of host lock for waking up EH handler
  scsi: MAINTAINERS: Update ibmvscsi_tgt maintainer
  scsi: initio: Remove redundant variable 'rb'
  scsi: virtio_scsi: Remove duplicate check if queue is broken
  scsi: isci: Fix an error code problem in isci_io_request_build()

Pull erofs fixes from Gao Xiang:

 - fix an infinite loop issue of sub-page compressed data support found
   with lengthy stress tests on a 64k-page arm64 VM

 - optimize the temporary buffer allocation for low-memory scenarios,
   which can reduce 20.21% on average under a heavy multi-app launch
   benchmark workload

 - get rid of unnecessary GFP_NOFS

* tag 'erofs-for-6.8-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: relaxed temporary buffers allocation on readahead
  erofs: fix infinite loop due to a race of filling compressed_bvecs
  erofs: get rid of unneeded GFP_NOFS

Merge tag 'linux_kselftest-kunit-fixes-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kunit fixes from Shuah Khan:
 "NULL vs IS_ERR() bug fixes, documentation update, MAINTAINERS file
  update to add Rae Moar as a reviewer, and a fix to run test suites
  only after module initialization completes"

* tag 'linux_kselftest-kunit-fixes-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  Documentation: KUnit: Update the instructions on how to test static functions
  kunit: run test suites only after module initialization completes
  MAINTAINERS: kunit: Add Rae Moar as a reviewer
  kunit: device: Fix a NULL vs IS_ERR() check in init()
  kunit: Fix a NULL vs IS_ERR() bug

Merge tag 'linux_kselftest-fixes-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
 "Three fixes to livepatch, rseq, and seccomp tests"

* tag 'linux_kselftest-fixes-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kselftest/seccomp: Report each expectation we assert as a KTAP test
  kselftest/seccomp: Use kselftest output functions for benchmark
  selftests/livepatch: fix and refactor new dmesg message code
  selftests/rseq: Do not skip !allowed_cpus for mm_cid

For these hooks the true "neutral" value is -EOPNOTSUPP, which is
currently what is returned when no LSM provides this hook and what LSMs
return when there is no security context set on the socket. Correct the
value in <linux/lsm_hooks.h> and adjust the dispatch functions in
security/security.c to avoid issues when the BPF LSM is enabled.

Cc: stable@vger.kernel.org
Fixes: 98e828a0 ("security: Refactor declaration of LSM hooks")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>

In an entirely unrelated discussion where I pointed out a stupid thinko
of mine, Rasmus piped up and noted that that obvious mistake already
existed elsewhere in the kernel tree.

An "error pointer" is the negative error value encoded as a pointer,
making the whole "return error or valid pointer" use-case simple and
straightforward.  We use it all over the kernel.

But the key here is that errors are _negative_ error numbers, not the
horrid UNIX user-level model of "-1 and the value of 'errno'".

The Apple mailbox driver used the positive error values, and thus just
returned invalid normal pointers instead of actual errors.

Of course, the reason nobody ever noticed is that the errors presumably
never actually happen, so this is fixing a conceptual bug rather than an
actual one.
Reported-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Link: https://lore.kernel.org/all/5c30afe0-f9fb-45d5-9333-dd914a1ea93a@prevas.dk/Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The seccomp benchmark test makes a number of checks on the performance it
measures and logs them to the output but does so in a custom format which
none of the automated test runners understand meaning that the chances that
anyone is paying attention are slim. Let's additionally log each result in
KTAP format so that automated systems parsing the test output will see each
comparison as a test case. The original logs are left in place since they
provide the actual numbers for analysis.

As part of this rework the flow for the main program so that when we skip
tests we still log all the tests we skip, this is because the standard KTAP
headers and footers include counts of the number of expected and run tests.
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

In preparation for trying to output the test results themselves in TAP
format rework all the prints in the benchmark to use the kselftest output
functions. The uses of system() all produce single line output so we can
avoid having to deal with fully managing the child process and continue to
use system() by simply printing an empty message before we invoke system().
We also leave one printf() used to complete a line of output in place.
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

The livepatching kselftests rely on comparing expected vs. observed
dmesg output.  After each test, new dmesg entries are determined by the
'comm' utility comparing a saved, pre-test copy of dmesg to post-test
dmesg output.

Alexander reports that the 'comm --nocheck-order -13' invocation used by
the tests can be confused when dmesg entry timestamps vary in magnitude
(ie, "[   98.820331]" vs. "[  100.031067]"), in which case, additional
messages are reported as new.  The unexpected entries then spoil the
test results.

Instead of relying on 'comm' or 'diff' to determine new testing dmesg
entries, refactor the code:

  - pre-test  : log a unique canary dmesg entry
  - test      : run tests, log messages
  - post-test : filter dmesg starting from pre-test message
Reported-by: Alexander Gordeev <agordeev@linux.ibm.com>
Closes: https://lore.kernel.org/live-patching/ZYAimyPYhxVA9wKg@li-008a6a4c-3549-11b2-a85c-c5cc2836eea2.ibm.com/Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tested-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

The max5970 datasheet gives the impression that IRQ status bits must
be cleared by writing a one to set bits, as those are marked with 'R/C',
however tests showed that a zero must be written.

Fixes an IRQ storm as the interrupt handler actually clears the IRQ
status bits.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Link: https://msgid.link/r/20240130150257.3643657-1-naresh.solanki@9elements.comSigned-off-by: Mark Brown <broonie@kernel.org>

Pull jfs fix from David Kleikamp:
 "Revert a bad sanity check"

* tag 'jfs-6.8-rc3' of github.com:kleikamp/linux-shaggy:
  Revert "jfs: fix shift-out-of-bounds in dbJoin"

Pull tracing fixes from Steven Rostedt:
 "Two small fixes for tracefs and eventfs:

   - Fix register_snapshot_trigger() on allocation error

     If the snapshot fails to allocate, the register_snapshot_trigger()
     can still return success. If the call to
     tracing_alloc_snapshot_instance() returned anything but 0, it
     returned 0, but it should have been returning the error code from
     that allocation function.

   - Remove leftover code from tracefs doing a dentry walk on remount.

     The update_gid() function was called by the tracefs code on remount
     to update the gid of eventfs, but that is no longer the case, but
     that code wasn't deleted. Nothing calls it. Remove it"

* tag 'trace-v6.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracefs: remove stale 'update_gid' code
  tracing/trigger: Fix to return error if failed to alloc snapshot

Merge tag 'mm-hotfixes-stable-2024-01-28-23-21' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "22 hotfixes. 11 are cc:stable and the remainder address post-6.7
  issues or aren't considered appropriate for backporting"

* tag 'mm-hotfixes-stable-2024-01-28-23-21' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits)
  mm: thp_get_unmapped_area must honour topdown preference
  mm: huge_memory: don't force huge page alignment on 32 bit
  userfaultfd: fix mmap_changing checking in mfill_atomic_hugetlb
  selftests/mm: ksm_tests should only MADV_HUGEPAGE valid memory
  scs: add CONFIG_MMU dependency for vfree_atomic()
  mm/memory: fix folio_set_dirty() vs. folio_mark_dirty() in zap_pte_range()
  mm/huge_memory: fix folio_set_dirty() vs. folio_mark_dirty()
  selftests/mm: Update va_high_addr_switch.sh to check CPU for la57 flag
  selftests: mm: fix map_hugetlb failure on 64K page size systems
  MAINTAINERS: supplement of zswap maintainers update
  stackdepot: make fast paths lock-less again
  stackdepot: add stats counters exported via debugfs
  mm, kmsan: fix infinite recursion due to RCU critical section
  mm/writeback: fix possible divide-by-zero in wb_dirty_limits(), again
  selftests/mm: switch to bash from sh
  MAINTAINERS: add man-pages git trees
  mm: memcontrol: don't throttle dying tasks on memory.high
  mm: mmap: map MAP_STACK to VM_NOHUGEPAGE
  uprobes: use pagesize-aligned virtual address when replacing pages
  selftests/mm: mremap_test: fix build warning
  ...

This reverts commit cca974da.

The added sanity check is incorrect. BUDMIN is not the wrong value and
is too small.
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>

Pull cxl fixes from Dan Williams:
 "A build regression fix, a device compatibility fix, and an original
  bug preventing creation of large (16 device) interleave sets:

   - Fix unit test build regression fallout from global
     "missing-prototypes" change

   - Fix compatibility with devices that do not support interrupts

   - Fix overflow when calculating the capacity of large interleave sets"

* tag 'cxl-fixes-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
  cxl/region：Fix overflow issue in alloc_hpa()
  cxl/pci: Skip irq features if MSI/MSI-X are not supported
  tools/testing/nvdimm: Disable "missing prototypes / declarations" warnings
  tools/testing/cxl: Disable "missing prototypes / declarations" warnings

The 'eventfs_update_gid()' function is no longer called, so remove it
(and the helper function it uses).

Link: https://lore.kernel.org/all/CAHk-=wj+DsZZ=2iTUkJ-Nojs9fjYMvPs1NuoM3yK7aTDtJfPYQ@mail.gmail.com/

Fixes: 8186fff7 ("tracefs/eventfs: Use root and instance inodes as default ownership")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Pull MIPS fixes from Thomas Bogendoerfer:

 - fix boot issue on single core Lantiq Danube devices

 - fix boot issue on Loongson64 platforms

 - fix improper FPU setup

 - fix missing prototypes issues

* tag 'mips-fixes_6.8_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  mips: Call lose_fpu(0) before initializing fcr31 in mips_set_personality_nan
  MIPS: loongson64: set nid for reserved memblock region
  Revert "MIPS: loongson64: set nid for reserved memblock region"
  MIPS: lantiq: register smp_ops on non-smp platforms
  MIPS: loongson64: set nid for reserved memblock region
  MIPS: reserve exception vector space ONLY ONCE
  MIPS: BCM63XX: Fix missing prototypes
  MIPS: sgi-ip32: Fix missing prototypes
  MIPS: sgi-ip30: Fix missing prototypes
  MIPS: fw arc: Fix missing prototypes
  MIPS: sgi-ip27: Fix missing prototypes
  MIPS: Alchemy: Fix missing prototypes
  MIPS: Cobalt: Fix missing prototypes

Pull locking fix from Borislav Petkov:

 - Prevent an inconsistent futex operation leading to stale state
   exposure

* tag 'locking_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Prevent the reuse of stale pi_state

Pull irq fix from Borislav Petkov:

 - Initialize the resend node of each IRQ descriptor, not only the first
   one

* tag 'irq_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Initialize resend_node hlist for all interrupt descriptors

Pull timer fixes from Borislav Petkov:

 - Preserve the number of idle calls and sleep entries across CPU
   hotplug events in order to be able to compute correct averages

 - Limit the duration of the clocksource watchdog checking interval as
   too long intervals lead to wrongly marking the TSC as unstable

* tag 'timers_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick/sched: Preserve number of idle sleeps across CPU hotplug events
  clocksource: Skip watchdog check for large watchdog intervals

Pull x86 fixes from Borislav Petkov:

 - Make sure 32-bit syscall registers are properly sign-extended

 - Add detection for AMD's Zen5 generation CPUs and Intel's Clearwater
   Forest CPU model number

 - Make a stub function export non-GPL because it is part of the
   paravirt alternatives and that can be used by non-GPL code

* tag 'x86_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/CPU/AMD: Add more models to X86_FEATURE_ZEN5
  x86/entry/ia32: Ensure s32 is sign extended to s64
  x86/cpu: Add model number for Intel Clearwater Forest processor
  x86/CPU/AMD: Add X86_FEATURE_ZEN5
  x86/paravirt: Make BUG_func() usable by non-GPL modules

Pull memblock fix from Mike Rapoport:
 "Fix crash when reserved memory is not added to memory.

  When CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, the initialization
  of reserved pages may cause access of NODE_DATA() with invalid nid and
  crash.

  Add a fall back to early_pfn_to_nid() in memmap_init_reserved_pages()
  to ensure a valid node id is always passed to init_reserved_page()"

* tag 'fixes-2024-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  memblock: fix crash when reserved memory is not added to memory

Merge tag 'platform-drivers-x86-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:

 - WMI bus driver fixes

 - Second attempt (previously reverted) at P2SB PCI rescan deadlock fix

 - AMD PMF driver improvements

 - MAINTAINERS updates

 - Misc other small fixes and hw-id additions

* tag 'platform-drivers-x86-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: touchscreen_dmi: Add info for the TECLAST X16 Plus tablet
  platform/x86/intel/ifs: Call release_firmware() when handling errors.
  platform/x86/amd/pmf: Fix memory leak in amd_pmf_get_pb_data()
  platform/x86/amd/pmf: Get ambient light information from AMD SFH driver
  platform/x86/amd/pmf: Get Human presence information from AMD SFH driver
  platform/mellanox: mlxbf-pmc: Fix offset calculation for crspace events
  platform/mellanox: mlxbf-tmfifo: Drop Tx network packet when Tx TmFIFO is full
  MAINTAINERS: remove defunct acpi4asus project info from asus notebooks section
  MAINTAINERS: add Luke Jones as maintainer for asus notebooks
  MAINTAINERS: Remove Perry Yuan as DELL WMI HARDWARE PRIVACY SUPPORT maintainer
  platform/x86: silicom-platform: Add missing "Description:" for power_cycle sysfs attr
  platform/x86: intel-wmi-sbl-fw-update: Fix function name in error message
  platform/x86: p2sb: Use pci_resource_n() in p2sb_read_bar0()
  platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
  platform/x86: intel-uncore-freq: Fix types in sysfs callbacks
  platform/x86: wmi: Fix wmi_dev_probe()
  platform/x86: wmi: Fix notify callback locking
  platform/x86: wmi: Decouple legacy WMI notify handlers from wmi_block_list
  platform/x86: wmi: Return immediately if an suitable WMI event is found
  platform/x86: wmi: Fix error handling in legacy WMI notify handler functions

Merge tag 'loongarch-fixes-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen:
 "Fix boot failure on machines with more than 8 nodes, and fix two build
  errors about KVM"

* tag 'loongarch-fixes-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: KVM: Add returns to SIMD stubs
  LoongArch: KVM: Fix build due to API changes
  LoongArch/smp: Call rcutree_report_cpu_starting() at tlb_init()

Pull xfs fix from Chandan Babu:

 - Fix read only mounts when using fsopen mount API

* tag 'xfs-6.8-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: read only mounts with fsopen mount API are busted

Pull bcachefs fixes from Kent Overstreet:

 - fix for REQ_OP_FLUSH usage; this fixes filesystems going read only
   with -EOPNOTSUPP from the block layer.

   (this really should have gone in with the block layer patch causing
   the -EOPNOTSUPP, or should have gone in before).

 - fix an allocation in non-sleepable context

 - fix one source of srcu lock latency, on devices with terrible discard
   latency

 - fix a reattach_inode() issue in fsck

* tag 'bcachefs-2024-01-26' of https://evilpiepirate.org/git/bcachefs:
  bcachefs: __lookup_dirent() works in snapshot, not subvol
  bcachefs: discard path uses unlock_long()
  bcachefs: fix incorrect usage of REQ_OP_FLUSH
  bcachefs: Add gfp flags param to bch2_prt_task_backtrace()

Pull smb server fixes from Steve French:

 - Fix netlink OOB

 - Minor kernel doc fix

* tag '6.8-rc2-smb3-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: fix global oob in ksmbd_nl_policy
  smb: Fix some kernel-doc comments

Pull smb client fixes from Steve French:
 "Nine cifs/smb client fixes

   - Four network error fixes (three relating to replays of requests
     that need to be retried, and one fixing some places where we were
     returning the wrong rc up the stack on network errors)

   - Two multichannel fixes including locking fix and case where subset
     of channels need reconnect

   - netfs integration fixup: share remote i_size with netfslib

   - Two small cleanups (one for addressing a clang warning)"

* tag '6.8-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix stray unlock in cifs_chan_skip_or_disable
  cifs: set replay flag for retries of write command
  cifs: commands that are retried should have replay flag set
  cifs: helper function to check replayable error codes
  cifs: translate network errors on send to -ECONNABORTED
  cifs: cifs_pick_channel should try selecting active channels
  cifs: Share server EOF pos with netfslib
  smb: Work around Clang __bdos() type confusion
  smb: client: delete "true", "false" defines

If we still own the FPU after initializing fcr31, when we are preempted
the dirty value in the FPU will be read out and stored into fcr31,
clobbering our setting.  This can cause an improper floating-point
environment after execve().  For example:

    zsh% cat measure.c
    #include <fenv.h>
    int main() { return fetestexcept(FE_INEXACT); }
    zsh% cc measure.c -o measure -lm
    zsh% echo $((1.0/3)) # raising FE_INEXACT
    0.33333333333333331
    zsh% while ./measure; do ; done
    (stopped in seconds)

Call lose_fpu(0) before setting fcr31 to prevent this.

Closes: https://lore.kernel.org/linux-mips/7a6aa1bbdbbe2e63ae96ff163fab0349f58f1b9e.camel@xry111.site/
Fixes: 9b26616c ("MIPS: Respect the ISA level in FCSR handling")
Cc: stable@vger.kernel.org
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Commit 61167ad5("mm: pass nid to reserve_bootmem_region()") reveals
that reserved memblock regions have no valid node id set, just set it
right since loongson64 firmware makes it clear in memory layout info.

This works around booting failure on 3A1000+ since commit 61167ad5
("mm: pass nid to reserve_bootmem_region()") under
CONFIG_DEFERRED_STRUCT_PAGE_INIT.
Signed-off-by: Huang Pei <huangpei@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

This reverts commit ce7b1b97.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Even with inplace decompression, sometimes very few temporary buffers
may be still needed for a single decompression shot (e.g. 16 pages for
64k sliding window or 4 pages for 16k sliding window).  In low-memory
scenarios, it would be better to try to allocate with GFP_NOWAIT on
readahead first.  That can help reduce the time spent on page allocation
under durative memory pressure.

Here are detailed performance numbers under multi-app launch benchmark
workload [1] on ARM64 Android devices (8-core CPU and 8GB of memory)
running a 5.15 LTS kernel with EROFS of 4k pclusters:

+----------------------------------------------+
|      LZ4       | vanilla | patched |  diff   |
|----------------+---------+---------+---------|
|  Average (ms)  |  3364   |  2684   | -20.21% | [64k sliding window]
|----------------+---------+---------+---------|
|  Average (ms)  |  2079   |  1610   | -22.56% | [16k sliding window]
+----------------------------------------------+

The total size of system images for 4k pclusters is almost unchanged:
(64k sliding window)  9,117,044 KB
(16k sliding window)  9,113,096 KB

Therefore, in addition to switch the sliding window from 64k to 16k,
after applying this patch, it can eventually save 52.14% (3364 -> 1610)
on average with no memory reservation.  That is particularly useful for
embedded devices with limited resources.

[1] https://lore.kernel.org/r/20240109074143.4138783-1-guochunhai@vivo.comSuggested-by: Gao Xiang <xiang@kernel.org>
Signed-off-by: Chunhai Guo <guochunhai@vivo.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Link: https://lore.kernel.org/r/20240126140142.201718-1-hsiangkao@linux.alibaba.com

Pull ata updates from Niklas Cassel:

 - Fix an incorrect link_power_management_policy sysfs attribute value.

   We were previously using the same attribute value for two different
   LPM policies (me)

 - Add a ASMedia ASM1166 quirk.

   The SATA host controller always reports that it has 32 ports, even
   though it only has six ports. Add a quirk that overrides the value
   reported by the controller (Conrad)

 - Add a ASMedia ASM1061 quirk.

   The SATA host controller completely ignores the upper 21 bits of the
   DMA address. This causes IOMMU error events when a (valid) DMA
   address actually has any of the upper 21 bits set. Add a quirk that
   limits the dma_mask to 43-bits (Lennert)

* tag 'ata-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
  ahci: add 43-bit DMA address quirk for ASMedia ASM1061 controllers
  ahci: asm1166: correct count of reported ports
  ata: libata-sata: improve sysfs description for ATA_LPM_UNKNOWN

Pull block fixes from Jens Axboe:

 - RCU warning fix for md (Mikulas)

 - Fix for an aoe issue that lockdep rightfully complained about
   (Maksim)

 - Fix for an error code change in partitioning that caused a regression
   with some tools (Li)

 - Fix for a data direction warning with bi-direction commands
   (Christian)

* tag 'block-6.8-2024-01-26' of git://git.kernel.dk/linux:
  md: fix a suspicious RCU usage warning
  aoe: avoid potential deadlock at set_capacity
  block: Fix WARNING in _copy_from_iter
  block: Move checking GENHD_FL_NO_PART to bdev_add_partition()

Pull io_uring fix from Jens Axboe:
 "Just a single tweak to the newly added IORING_OP_FIXED_FD_INSTALL from
  Paul, ensuring it goes via the audit path and playing it safe by
  excluding it from using registered creds"

* tag 'io_uring-6.8-2024-01-26' of git://git.kernel.dk/linux:
  io_uring: enable audit and restrict cred override for IORING_OP_FIXED_FD_INSTALL

Pull thermal control update from Rafael Wysocki:
 "Remove some dead code from the Intel powerclamp thermal control driver
  (Srinivas Pandruvada)"

* tag 'thermal-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: intel: powerclamp: Remove dead code for target mwait value