Skip to content

L
linux
Switch branch/tag
  1. 06 Aug, 2019 21 commits
    • Vladimir Oltean's avatar
      net: dsa: sja1105: Use the LOCKEDS bit for SJA1105 E/T as well · 4b7da3d8
      Vladimir Oltean authored 
      It looks like the FDB dump taken from first-generation switches also
contains information on whether entries are static or not. So use that
instead of searching through the driver's tables.

Fixes: d7637782 ("net: dsa: sja1105: Implement is_static for FDB entries on E/T")
Signed-off-by: default avatarVladimir Oltean <olteanv@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4b7da3d8
    • Vladimir Oltean's avatar
      net: dsa: sja1105: Fix broken learning with vlan_filtering disabled · 6d7c7d94
      Vladimir Oltean authored 
      When put under a bridge with vlan_filtering 0, the SJA1105 ports will
flood all traffic as if learning was broken. This is because learning
interferes with the rx_vid's configured by dsa_8021q as unique pvid's.

So learning technically still *does* work, it's just that the learnt
entries never get matched due to their unique VLAN ID.

The setting that saves the day is Shared VLAN Learning, which on this
switch family works exactly as desired: VLAN tagging still works
(untagged traffic gets the correct pvid) and FDB entries are still
populated with the correct contents including VID. Also, a frame cannot
violate the forwarding domain restrictions enforced by its classified
VLAN. It is just that the VID is ignored when looking up the FDB for
taking a forwarding decision (selecting the egress port).

This patch activates SVL, and the result is that frames with a learnt
DMAC are no longer flooded in the scenario described above.

Now exactly *because* SVL works as desired, we have to revisit some
earlier patches:

- It is no longer necessary to manipulate the VID of the 'bridge fdb
  {add,del}' command when vlan_filtering is off. This is because now,
  SVL is enabled for that case, so the actual VID does not matter*.

- It is still desirable to hide dsa_8021q VID's in the FDB dump
  callback. But right now the dump callback should no longer hide
  duplicates (one per each front panel port's pvid, plus one for the
  VLAN that the CPU port is going to tag a TX frame with), because there
  shouldn't be any (the switch will match a single FDB entry no matter
  its VID anyway).

* Not really... It's no longer necessary to transform a 'bridge fdb add'
  into 5 fdb add operations, but the user might still add a fdb entry with
  any vid, and all of them would appear as duplicates in 'bridge fdb
  show'. So force a 'bridge fdb add' to insert the VID of 0**, so that we
  can prune the duplicates at insertion time.

** The VID of 0 is better than 1 because it is always guaranteed to be
   in the ports' hardware filter. DSA also avoids putting the VID inside
   the netlink response message towards the bridge driver when we return
   this particular VID, which makes it suitable for FDB entries learnt
   with vlan_filtering off.

Fixes: 227d07a0 ("net: dsa: sja1105: Add support for traffic through standalone ports")
Signed-off-by: default avatarVladimir Oltean <olteanv@gmail.com>
Signed-off-by: default avatarGeorg Waibel <georg.waibel@sensor-technik.de>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6d7c7d94
    • Nishka Dasgupta's avatar
      net: dsa: qca8k: Add of_node_put() in qca8k_setup_mdio_bus() · f26e0cca
      Nishka Dasgupta authored 
      Each iteration of for_each_available_child_of_node() puts the previous
node, but in the case of a return from the middle of the loop, there
is no put, thus causing a memory leak. Hence add an of_node_put() before
the return.
Additionally, the local variable ports in the function
qca8k_setup_mdio_bus() takes the return value of of_get_child_by_name(),
which gets a node but does not put it. If the function returns without
putting ports, it may cause a memory leak. Hence put ports before the
mid-loop return statement, and also outside the loop after its last usage
in this function.
Issues found with Coccinelle.
Signed-off-by: default avatarNishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f26e0cca
    • David S. Miller's avatar
      Merge branch 'flow_offload-action-fixes' · 443bfb4a
      David S. Miller authored 
      Vlad Buslov says:

====================
action fixes for flow_offload infra compatibility

Fix rcu warnings due to usage of action helpers that expect rcu read lock
protection from rtnl-protected context of flow_offload infra.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      443bfb4a
    • Vlad Buslov's avatar
      net: sched: sample: allow accessing psample_group with rtnl · 67cbf7de
      Vlad Buslov authored 
      Recently implemented support for sample action in flow_offload infra leads
to following rcu usage warning:

[ 1938.234856] =============================
[ 1938.234858] WARNING: suspicious RCU usage
[ 1938.234863] 5.3.0-rc1+ #574 Not tainted
[ 1938.234866] -----------------------------
[ 1938.234869] include/net/tc_act/tc_sample.h:47 suspicious rcu_dereference_check() usage!
[ 1938.234872]
               other info that might help us debug this:

[ 1938.234875]
               rcu_scheduler_active = 2, debug_locks = 1
[ 1938.234879] 1 lock held by tc/19540:
[ 1938.234881]  #0: 00000000b03cb918 (rtnl_mutex){+.+.}, at: tc_new_tfilter+0x47c/0x970
[ 1938.234900]
               stack backtrace:
[ 1938.234905] CPU: 2 PID: 19540 Comm: tc Not tainted 5.3.0-rc1+ #574
[ 1938.234908] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017
[ 1938.234911] Call Trace:
[ 1938.234922]  dump_stack+0x85/0xc0
[ 1938.234930]  tc_setup_flow_action+0xed5/0x2040
[ 1938.234944]  fl_hw_replace_filter+0x11f/0x2e0 [cls_flower]
[ 1938.234965]  fl_change+0xd24/0x1b30 [cls_flower]
[ 1938.234990]  tc_new_tfilter+0x3e0/0x970
[ 1938.235021]  ? tc_del_tfilter+0x720/0x720
[ 1938.235028]  rtnetlink_rcv_msg+0x389/0x4b0
[ 1938.235038]  ? netlink_deliver_tap+0x95/0x400
[ 1938.235044]  ? rtnl_dellink+0x2d0/0x2d0
[ 1938.235053]  netlink_rcv_skb+0x49/0x110
[ 1938.235063]  netlink_unicast+0x171/0x200
[ 1938.235073]  netlink_sendmsg+0x224/0x3f0
[ 1938.235091]  sock_sendmsg+0x5e/0x60
[ 1938.235097]  ___sys_sendmsg+0x2ae/0x330
[ 1938.235111]  ? __handle_mm_fault+0x12cd/0x19e0
[ 1938.235125]  ? __handle_mm_fault+0x12cd/0x19e0
[ 1938.235138]  ? find_held_lock+0x2b/0x80
[ 1938.235147]  ? do_user_addr_fault+0x22d/0x490
[ 1938.235160]  __sys_sendmsg+0x59/0xa0
[ 1938.235178]  do_syscall_64+0x5c/0xb0
[ 1938.235187]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1938.235192] RIP: 0033:0x7ff9a4d597b8
[ 1938.235197] Code: 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 8f 0c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83
 ec 28 89 54
[ 1938.235200] RSP: 002b:00007ffcfe381c48 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 1938.235205] RAX: ffffffffffffffda RBX: 000000005d4497f9 RCX: 00007ff9a4d597b8
[ 1938.235208] RDX: 0000000000000000 RSI: 00007ffcfe381cb0 RDI: 0000000000000003
[ 1938.235211] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000006
[ 1938.235214] R10: 0000000000404ec2 R11: 0000000000000246 R12: 0000000000000001
[ 1938.235217] R13: 0000000000480640 R14: 0000000000000012 R15: 0000000000000001

Change tcf_sample_psample_group() helper to allow using it from both rtnl
and rcu protected contexts.

Fixes: a7a7be60 ("net/sched: add sample action to the hardware intermediate representation")
Signed-off-by: default avatarVlad Buslov <vladbu@mellanox.com>
Reviewed-by: default avatarPieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      67cbf7de
    • Vlad Buslov's avatar
      net: sched: police: allow accessing police->params with rtnl · c4bd4869
      Vlad Buslov authored 
      Recently implemented support for police action in flow_offload infra leads
to following rcu usage warning:

[ 1925.881092] =============================
[ 1925.881094] WARNING: suspicious RCU usage
[ 1925.881098] 5.3.0-rc1+ #574 Not tainted
[ 1925.881100] -----------------------------
[ 1925.881104] include/net/tc_act/tc_police.h:57 suspicious rcu_dereference_check() usage!
[ 1925.881106]
               other info that might help us debug this:

[ 1925.881109]
               rcu_scheduler_active = 2, debug_locks = 1
[ 1925.881112] 1 lock held by tc/18591:
[ 1925.881115]  #0: 00000000b03cb918 (rtnl_mutex){+.+.}, at: tc_new_tfilter+0x47c/0x970
[ 1925.881124]
               stack backtrace:
[ 1925.881127] CPU: 2 PID: 18591 Comm: tc Not tainted 5.3.0-rc1+ #574
[ 1925.881130] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017
[ 1925.881132] Call Trace:
[ 1925.881138]  dump_stack+0x85/0xc0
[ 1925.881145]  tc_setup_flow_action+0x1771/0x2040
[ 1925.881155]  fl_hw_replace_filter+0x11f/0x2e0 [cls_flower]
[ 1925.881175]  fl_change+0xd24/0x1b30 [cls_flower]
[ 1925.881200]  tc_new_tfilter+0x3e0/0x970
[ 1925.881231]  ? tc_del_tfilter+0x720/0x720
[ 1925.881243]  rtnetlink_rcv_msg+0x389/0x4b0
[ 1925.881250]  ? netlink_deliver_tap+0x95/0x400
[ 1925.881257]  ? rtnl_dellink+0x2d0/0x2d0
[ 1925.881264]  netlink_rcv_skb+0x49/0x110
[ 1925.881275]  netlink_unicast+0x171/0x200
[ 1925.881284]  netlink_sendmsg+0x224/0x3f0
[ 1925.881299]  sock_sendmsg+0x5e/0x60
[ 1925.881305]  ___sys_sendmsg+0x2ae/0x330
[ 1925.881309]  ? task_work_add+0x43/0x50
[ 1925.881314]  ? fput_many+0x45/0x80
[ 1925.881329]  ? __lock_acquire+0x248/0x1930
[ 1925.881342]  ? find_held_lock+0x2b/0x80
[ 1925.881347]  ? task_work_run+0x7b/0xd0
[ 1925.881359]  __sys_sendmsg+0x59/0xa0
[ 1925.881375]  do_syscall_64+0x5c/0xb0
[ 1925.881381]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1925.881384] RIP: 0033:0x7feb245047b8
[ 1925.881388] Code: 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 8f 0c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83
 ec 28 89 54
[ 1925.881391] RSP: 002b:00007ffc2d2a5788 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 1925.881395] RAX: ffffffffffffffda RBX: 000000005d4497ed RCX: 00007feb245047b8
[ 1925.881398] RDX: 0000000000000000 RSI: 00007ffc2d2a57f0 RDI: 0000000000000003
[ 1925.881400] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000006
[ 1925.881403] R10: 0000000000404ec2 R11: 0000000000000246 R12: 0000000000000001
[ 1925.881406] R13: 0000000000480640 R14: 0000000000000012 R15: 0000000000000001

Change tcf_police_rate_bytes_ps() and tcf_police_tcfp_burst() helpers to
allow using them from both rtnl and rcu protected contexts.

Fixes: 8c8cfc6e ("net/sched: add police action to the hardware intermediate representation")
Signed-off-by: default avatarVlad Buslov <vladbu@mellanox.com>
Reviewed-by: default avatarPieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c4bd4869
    • David S. Miller's avatar
      Merge branch 'hisilicon-fixes' · 2b0dfc17
      David S. Miller authored 
      Jiangfeng Xiao says:

====================
net: hisilicon: Fix a few problems with hip04_eth

During the use of the hip04_eth driver,
several problems were found,
which solved the hip04_tx_reclaim reentry problem,
fixed the problem that hip04_mac_start_xmit never
returns NETDEV_TX_BUSY
and the dma_map_single failed on the arm64 platform.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2b0dfc17
    • Jiangfeng Xiao's avatar
      net: hisilicon: Fix dma_map_single failed on arm64 · 96a50c0d
      Jiangfeng Xiao authored 
      On the arm64 platform, executing "ifconfig eth0 up" will fail,
returning "ifconfig: SIOCSIFFLAGS: Input/output error."

ndev->dev is not initialized, dma_map_single->get_dma_ops->
dummy_dma_ops->__dummy_map_page will return DMA_ERROR_CODE
directly, so when we use dma_map_single, the first parameter
is to use the device of platform_device.
Signed-off-by: default avatarJiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      96a50c0d
    • Jiangfeng Xiao's avatar
      net: hisilicon: fix hip04-xmit never return TX_BUSY · f2243b82
      Jiangfeng Xiao authored 
      TX_DESC_NUM is 256, in tx_count, the maximum value of
mod(TX_DESC_NUM - 1) is 254, the variable "count" in
the hip04_mac_start_xmit function is never equal to
(TX_DESC_NUM - 1), so hip04_mac_start_xmit never
return NETDEV_TX_BUSY.

tx_count is modified to mod(TX_DESC_NUM) so that
the maximum value of tx_count can reach
(TX_DESC_NUM - 1), then hip04_mac_start_xmit can reurn
NETDEV_TX_BUSY.
Signed-off-by: default avatarJiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f2243b82
    • Jiangfeng Xiao's avatar
      net: hisilicon: make hip04_tx_reclaim non-reentrant · 1a2c070a
      Jiangfeng Xiao authored 
      If hip04_tx_reclaim is interrupted while it is running
and then __napi_schedule continues to execute
hip04_rx_poll->hip04_tx_reclaim, reentrancy occurs
and oops is generated. So you need to mask the interrupt
during the hip04_tx_reclaim run.

The kernel oops exception stack is as follows:

Unable to handle kernel NULL pointer dereference
at virtual address 00000050
pgd = c0003000
[00000050] *pgd=80000000a04003, *pmd=00000000
Internal error: Oops: 206 [#1] SMP ARM
Modules linked in: hip04_eth mtdblock mtd_blkdevs mtd
ohci_platform ehci_platform ohci_hcd ehci_hcd
vfat fat sd_mod usb_storage scsi_mod usbcore usb_common
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G           O    4.4.185 #1
Hardware name: Hisilicon A15
task: c0a250e0 task.stack: c0a00000
PC is at hip04_tx_reclaim+0xe0/0x17c [hip04_eth]
LR is at hip04_tx_reclaim+0x30/0x17c [hip04_eth]
pc : [<bf30c3a4>]    lr : [<bf30c2f4>]    psr: 600e0313
sp : c0a01d88  ip : 00000000  fp : c0601f9c
r10: 00000000  r9 : c3482380  r8 : 00000001
r7 : 00000000  r6 : 000000e1  r5 : c3482000  r4 : 0000000c
r3 : f2209800  r2 : 00000000  r1 : 00000000  r0 : 00000000
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 32c5387d  Table: 03d28c80  DAC: 55555555
Process swapper/0 (pid: 0, stack limit = 0xc0a00190)
Stack: (0xc0a01d88 to 0xc0a02000)
[<bf30c3a4>] (hip04_tx_reclaim [hip04_eth]) from [<bf30d2e0>]
                                                (hip04_rx_poll+0x88/0x368 [hip04_eth])
[<bf30d2e0>] (hip04_rx_poll [hip04_eth]) from [<c04c2d9c>] (net_rx_action+0x114/0x34c)
[<c04c2d9c>] (net_rx_action) from [<c021eed8>] (__do_softirq+0x218/0x318)
[<c021eed8>] (__do_softirq) from [<c021f284>] (irq_exit+0x88/0xac)
[<c021f284>] (irq_exit) from [<c0240090>] (msa_irq_exit+0x11c/0x1d4)
[<c0240090>] (msa_irq_exit) from [<c02677e0>] (__handle_domain_irq+0x110/0x148)
[<c02677e0>] (__handle_domain_irq) from [<c0201588>] (gic_handle_irq+0xd4/0x118)
[<c0201588>] (gic_handle_irq) from [<c0551700>] (__irq_svc+0x40/0x58)
Exception stack(0xc0a01f30 to 0xc0a01f78)
1f20:                                     c0ae8b40 00000000 00000000 00000000
1f40: 00000002 ffffe000 c0601f9c 00000000 ffffffff c0a2257c c0a22440 c0831a38
1f60: c0a01ec4 c0a01f80 c0203714 c0203718 600e0213 ffffffff
[<c0551700>] (__irq_svc) from [<c0203718>] (arch_cpu_idle+0x20/0x3c)
[<c0203718>] (arch_cpu_idle) from [<c025bfd8>] (cpu_startup_entry+0x244/0x29c)
[<c025bfd8>] (cpu_startup_entry) from [<c054b0d8>] (rest_init+0xc8/0x10c)
[<c054b0d8>] (rest_init) from [<c0800c58>] (start_kernel+0x468/0x514)
Code: a40599e5 016086e2 018088e2 7660efe6 (503090e5)
---[ end trace 1db21d6d09c49d74 ]---
Kernel panic - not syncing: Fatal exception in interrupt
CPU3: stopping
CPU: 3 PID: 0 Comm: swapper/3 Tainted: G      D    O    4.4.185 #1
Signed-off-by: default avatarJiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1a2c070a
    • David S. Miller's avatar
      Merge branch 'Fix-batched-event-generation-for-vlan-action' · 5b0bce24
      David S. Miller authored 
      Roman Mashak says:

====================
Fix batched event generation for vlan action

When adding or deleting a batch of entries, the kernel sends up to
TCA_ACT_MAX_PRIO (defined to 32 in kernel) entries in an event to user
space. However it does not consider that the action sizes may vary and
require different skb sizes.

For example, consider the following script adding 32 entries with all
supported vlan parameters (in order to maximize netlink messages size):

% cat tc-batch.sh
TC="sudo /mnt/iproute2.git/tc/tc"

$TC actions flush action vlan
for i in `seq 1 $1`;
do
   cmd="action vlan push protocol 802.1q id 4094 priority 7 pipe \
               index $i cookie aabbccddeeff112233445566778800a1 "
   args=$args$cmd
done
$TC actions add $args
%
% ./tc-batch.sh 32
Error: Failed to fill netlink attributes while adding TC action.
We have an error talking to the kernel
%

patch 1 adds callback in tc_action_ops of vlan action, which calculates
the action size, and passes size to tcf_add_notify()/tcf_del_notify().

patch 2 updates the TDC test suite with relevant vlan test cases.
====================
Acked-by: default avatarJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5b0bce24
    • Roman Mashak's avatar
      tc-testing: updated vlan action tests with batch create/delete · 8571deb0
      Roman Mashak authored 
      Update TDC tests with cases varifying ability of TC to install or delete
batches of vlan actions.
Signed-off-by: default avatarRoman Mashak <mrv@mojatatu.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8571deb0
    • Roman Mashak's avatar
      net sched: update vlan action for batched events operations · b35475c5
      Roman Mashak authored 
      Add get_fill_size() routine used to calculate the action size
when building a batch of events.

Fixes: c7e2b968 ("sched: introduce vlan action")
Signed-off-by: default avatarRoman Mashak <mrv@mojatatu.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b35475c5
    • David S. Miller's avatar
      Merge branch 'stmmac-fixes' · 3abd24a1
      David S. Miller authored 
      Jose Abreu says:

====================
net: stmmac: Fixes for -net

Couple of fixes for -net. More info in commit log.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3abd24a1
    • Jose Abreu's avatar
      net: stmmac: tc: Do not return a fragment entry · 4a6a1385
      Jose Abreu authored 
      Do not try to return a fragment entry from TC list. Otherwise we may not
clean properly allocated entries.
Signed-off-by: default avatarJose Abreu <joabreu@synopsys.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4a6a1385
    • Jose Abreu's avatar
      net: stmmac: Fix issues when number of Queues >= 4 · e8df7e8c
      Jose Abreu authored 
      When queues >= 4 we use different registers but we were not subtracting
the offset of 4. Fix this.

Found out by Coverity.
Signed-off-by: default avatarJose Abreu <joabreu@synopsys.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e8df7e8c
    • Jose Abreu's avatar
      net: stmmac: xgmac: Fix XGMAC selftests · 0efedbf1
      Jose Abreu authored 
      Fixup the XGMAC selftests by correctly finishing the implementation of
set_filter callback.

Result:
$ ethtool -t enp4s0
The test result is PASS
The test extra info:
 1. MAC Loopback         	 0
 2. PHY Loopback         	 -95
 3. MMC Counters         	 -95
 4. EEE                  	 -95
 5. Hash Filter MC       	 0
 6. Perfect Filter UC    	 0
 7. MC Filter            	 0
 8. UC Filter            	 0
 9. Flow Control         	 0
Signed-off-by: default avatarJose Abreu <joabreu@synopsys.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0efedbf1
    • David S. Miller's avatar
      Merge tag 'wireless-drivers-for-davem-2019-08-06' of... · 0574f2ed
      David S. Miller authored 
      Merge tag 'wireless-drivers-for-davem-2019-08-06' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for 5.3

Second set of fixes for 5.3. Lots of iwlwifi fixes have accumulated
which consists most of patches in this pull request. Only most notable
iwlwifi fixes are listed below.

mwifiex

* fix a regression related to WPA1 networks since v5.3-rc1

iwlwifi

* fix use-after-free issues

* fix DMA mapping API usage errors

* fix frame drop occurring due to reorder buffer handling in
  RSS in certain conditions

* fix rate scale locking issues

* disable TX A-MSDU on older NICs as it causes problems and was
  never supposed to be supported

* new PCI IDs

* GEO_TX_POWER_LIMIT API issue that many people were hitting
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0574f2ed
    • Denis Kirjanov's avatar
      be2net: disable bh with spin_lock in be_process_mcc · d0d006a4
      Denis Kirjanov authored 
      be_process_mcc() is invoked in 3 different places and
always with BHs disabled except the be_poll function
but since it's invoked from softirq with BHs
disabled it won't hurt.

v1->v2: added explanation to the patch
v2->v3: add a missing call from be_cmds.c
Signed-off-by: default avatarDenis Kirjanov <kda@linux-powerpc.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d0d006a4
    • Christophe JAILLET's avatar
      net: cxgb3_main: Fix a resource leak in a error path in 'init_one()' · debea2cd
      Christophe JAILLET authored 
      A call to 'kfree_skb()' is missing in the error handling path of
'init_one()'.
This is already present in 'remove_one()' but is missing here.
Signed-off-by: default avatarChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      debea2cd
    • Chen-Yu Tsai's avatar
      net: ethernet: sun4i-emac: Support phy-handle property for finding PHYs · 5c4e2e1a
      Chen-Yu Tsai authored 
      The sun4i-emac uses the "phy" property to find the PHY it's supposed to
use. This property was deprecated in favor of "phy-handle" in commit
8c5b0944 ("dt-bindings: net: sun4i-emac: Convert the binding to a
schemas").

Add support for this new property name, and fall back to the old one in
case the device tree hasn't been updated.
Signed-off-by: default avatarChen-Yu Tsai <wens@csie.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5c4e2e1a
  3. 05 Aug, 2019 18 commits
  5. 03 Aug, 2019 1 commit
    • Qian Cai's avatar
      net/socket: fix GCC8+ Wpacked-not-aligned warnings · 5e5412c3
      Qian Cai authored 
      There are a lot of those warnings with GCC8+ 64-bit,

In file included from ./include/linux/sctp.h:42,
                 from net/core/skbuff.c:47:
./include/uapi/linux/sctp.h:395:1: warning: alignment 4 of 'struct
sctp_paddr_change' is less than 8 [-Wpacked-not-aligned]
 } __attribute__((packed, aligned(4)));
 ^
./include/uapi/linux/sctp.h:728:1: warning: alignment 4 of 'struct
sctp_setpeerprim' is less than 8 [-Wpacked-not-aligned]
 } __attribute__((packed, aligned(4)));
 ^
./include/uapi/linux/sctp.h:727:26: warning: 'sspp_addr' offset 4 in
'struct sctp_setpeerprim' isn't aligned to 8 [-Wpacked-not-aligned]
  struct sockaddr_storage sspp_addr;
                          ^~~~~~~~~
./include/uapi/linux/sctp.h:741:1: warning: alignment 4 of 'struct
sctp_prim' is less than 8 [-Wpacked-not-aligned]
 } __attribute__((packed, aligned(4)));
 ^
./include/uapi/linux/sctp.h:740:26: warning: 'ssp_addr' offset 4 in
'struct sctp_prim' isn't aligned to 8 [-Wpacked-not-aligned]
  struct sockaddr_storage ssp_addr;
                          ^~~~~~~~
./include/uapi/linux/sctp.h:792:1: warning: alignment 4 of 'struct
sctp_paddrparams' is less than 8 [-Wpacked-not-aligned]
 } __attribute__((packed, aligned(4)));
 ^
./include/uapi/linux/sctp.h:784:26: warning: 'spp_address' offset 4 in
'struct sctp_paddrparams' isn't aligned to 8 [-Wpacked-not-aligned]
  struct sockaddr_storage spp_address;
                          ^~~~~~~~~~~
./include/uapi/linux/sctp.h:905:1: warning: alignment 4 of 'struct
sctp_paddrinfo' is less than 8 [-Wpacked-not-aligned]
 } __attribute__((packed, aligned(4)));
 ^
./include/uapi/linux/sctp.h:899:26: warning: 'spinfo_address' offset 4
in 'struct sctp_paddrinfo' isn't aligned to 8 [-Wpacked-not-aligned]
  struct sockaddr_storage spinfo_address;
                          ^~~~~~~~~~~~~~

This is because the commit 20c9c825 ("[SCTP] Fix SCTP socket options
to work with 32-bit apps on 64-bit kernels.") added "packed, aligned(4)"
GCC attributes to some structures but one of the members, i.e, "struct
sockaddr_storage" in those structures has the attribute,
"aligned(__alignof__ (struct sockaddr *)" which is 8-byte on 64-bit
systems, so the commit overwrites the designed alignments for
"sockaddr_storage".

To fix this, "struct sockaddr_storage" needs to be aligned to 4-byte as
it is only used in those packed sctp structure which is part of UAPI,
and "struct __kernel_sockaddr_storage" is used in some other
places of UAPI that need not to change alignments in order to not
breaking userspace.

Use an implicit alignment for "struct __kernel_sockaddr_storage" so it
can keep the same alignments as a member in both packed and un-packed
structures without breaking UAPI.
Suggested-by: default avatarDavid Laight <David.Laight@ACULAB.COM>
Signed-off-by: default avatarQian Cai <cai@lca.pw>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5e5412c3
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7