sctp_packet_config() is called when getting the packet ready
for appending of chunks.  The function should not touch the
current state, since it's possible to ping-pong between two
transports when sending, and that can result packet corruption
followed by skb overlfow crash.
Reported-by: Thomas Dreibholz <dreibh@iem.uni-due.de>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the alloc_skb() fails then we return 65431 instead of -ENOBUFS
(-105).
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The atlx drivers are sufficiently mature that we no longer need a separate
mailing list for them.  Move the discussion to netdev, so we can decommission
atl1-devel, which is now mostly spam.
Signed-off-by: Chris Snook <chris.snook@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixed formatting (tabs and line breaks).

The CHELSIO_GET_QSET_NUM device ioctl allows unprivileged users to read
4 bytes of uninitialized stack memory, because the "addr" member of the
ch_reg struct declared on the stack in cxgb_extension_ioctl() is not
altered or zeroed before being copied back to the user.  This patch
takes care of it.
Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixed formatting (tabs and line breaks).

The EQL_GETMASTRCFG device ioctl allows unprivileged users to read 16
bytes of uninitialized stack memory, because the "master_name" member of
the master_config_t struct declared on the stack in eql_g_master_cfg()
is not altered or zeroed before being copied back to the user.  This
patch takes care of it.
Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixed formatting (tabs and line breaks).

The TIOCGICOUNT device ioctl allows unprivileged users to read
uninitialized stack memory, because the "reserved" member of the
serial_icounter_struct struct declared on the stack in hso_get_count()
is not altered or zeroed before being copied back to the user.  This
patch takes care of it.
Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip_local_out() is called with rcu_read_lock() held from ip_queue_xmit()
but not from other call sites.
Reported-and-bisected-by: Nick Bowler <nbowler@elliptictech.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The Thinkpad X100e seems to have some odd behaviour when the display is
powered off - the onboard r8169 starts generating rxfifo overflow errors.
The root cause of this has not yet been identified and may well be a
hardware design bug on the platform, but r8169 should be more resiliant to
this. This patch enables the rxfifo interrupt on 8168 devices and removes
the MAC version check in the interrupt handler, and the machine no longer
crashes when under network load while the screen turns off.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no need to use spinlocks in vortex_{set|get}_wol.
This also fixes a bug:
[  254.214993] 3c59x 0000:00:0d.0: PME# enabled
[  254.215021] BUG: sleeping function called from invalid context at kernel/mutex.c:94
[  254.215030] in_atomic(): 0, irqs_disabled(): 1, pid: 4875, name: ethtool
[  254.215042] Pid: 4875, comm: ethtool Tainted: G        W   2.6.36-rc3+ #7
[  254.215049] Call Trace:
[  254.215050]  [] __might_sleep+0xb1/0xb6
[  254.215050]  [] mutex_lock+0x17/0x30
[  254.215050]  [] acpi_enable_wakeup_device_power+0x2b/0xb1
[  254.215050]  [] acpi_pm_device_sleep_wake+0x42/0x7f
[  254.215050]  [] acpi_pci_sleep_wake+0x5d/0x63
[  254.215050]  [] platform_pci_sleep_wake+0x1d/0x20
[  254.215050]  [] __pci_enable_wake+0x90/0xd0
[  254.215050]  [] acpi_set_WOL+0x8e/0xf5 [3c59x]
[  254.215050]  [] vortex_set_wol+0x4e/0x5e [3c59x]
[  254.215050]  [] dev_ethtool+0x1cf/0xb61
[  254.215050]  [] ? debug_mutex_free_waiter+0x45/0x4a
[  254.215050]  [] ? __mutex_lock_common+0x204/0x20e
[  254.215050]  [] ? __mutex_lock_slowpath+0x12/0x15
[  254.215050]  [] ? mutex_lock+0x23/0x30
[  254.215050]  [] dev_ioctl+0x42c/0x533
[  254.215050]  [] ? _cond_resched+0x8/0x1c
[  254.215050]  [] ? lock_page+0x1c/0x30
[  254.215050]  [] ? page_address+0x15/0x7c
[  254.215050]  [] ? filemap_fault+0x187/0x2c4
[  254.215050]  [] sock_ioctl+0x1d4/0x1e0
[  254.215050]  [] ? sock_ioctl+0x0/0x1e0
[  254.215050]  [] vfs_ioctl+0x19/0x33
[  254.215050]  [] do_vfs_ioctl+0x424/0x46f
[  254.215050]  [] ? selinux_file_ioctl+0x3c/0x40
[  254.215050]  [] sys_ioctl+0x40/0x5a
[  254.215050]  [] sysenter_do_call+0x12/0x22

vortex_set_wol protected with a spinlock, but nested  acpi_set_WOL acquires a mutex inside atomic context.
Ethtool operations are already serialized by RTNL mutex, so it is safe to drop the locks.
Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

If peer uses tiny MSS (say, 75 bytes) and similarly tiny advertised
window, the SWS logic will packetize to half the MSS unnecessarily.

This causes problems with some embedded devices.

However for large MSS devices we do want to half-MSS packetize
otherwise we never get enough packets into the pipe for things
like fast retransmit and recovery to work.

Be careful also to handle the case where MSS > window, otherwise
we'll never send until the probe timer.
Reported-by: ツ Leandro Melo de Sales <leandroal@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

You cannot invoke __smp_call_function_single() unless the
architecture sets this symbol.
Reported-by: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On resume, before starting the PAL state machine, check if the
adjust_link() method is well supplied. If not, this would lead to a
NULL pointer dereference in the phy_state_machine() function.

This scenario can happen if the Ethernet driver call manually the PHY
functions instead of using the PAL state machine. The mv643xx_eth driver
is a such example.
Signed-off-by: Simon Guinot <sguinot@lacie.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netdev_wait_allrefs() waits that all references to a device vanishes.

It currently uses a _very_ pessimistic 250 ms delay between each probe.
Some users reported that no more than 4 devices can be dismantled per
second, this is a pretty serious problem for some setups.

Most of the time, a refcount is about to be released by an RCU callback,
that is still in flight because rollback_registered_many() uses a
synchronize_rcu() call instead of rcu_barrier(). Problem is visible if
number of online cpus is one, because synchronize_rcu() is then a no op.

time to remove 50 ipip tunnels on a UP machine :

before patch : real 11.910s
after patch : real 1.250s
Reported-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reported-by: Octavian Purdila <opurdila@ixiacom.com>
Reported-by: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It was recently brought to my attention that 802.3ad mode bonds would no
longer form when using some network hardware after a driver update.
After snooping around I realized that the particular hardware was using
page-based skbs and found that skb->data did not contain a valid LACPDU
as it was not stored there.  That explained the inability to form an
802.3ad-based bond.  For balance-alb mode bonds this was also an issue
as ARPs would not be properly processed.

This patch fixes the issue in my tests and should be applied to 2.6.36
and as far back as anyone cares to add it to stable.

Thanks to Alexander Duyck <alexander.h.duyck@intel.com> and Jesse
Brandeburg <jesse.brandeburg@intel.com> for the suggestions on this one.
Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
CC: Alexander Duyck <alexander.h.duyck@intel.com>
CC: Jesse Brandeburg <jesse.brandeburg@intel.com>
CC: stable@kerne.org
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While integrating your man-pages patch for IP_NODEFRAG, I noticed
that this option is settable by setsockopt(), but not gettable by
getsockopt(). I suppose this is not intended. The (untested,
trivial) patch below adds getsockopt() support.
Signed-off-by: Michael kerrisk <mtk.manpages@gmail.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After all these years, it turns out that the
    /proc/sys/net/ipv4/conf/*/force_igmp_version
parameter isn't fully implemented.

*Symptom*:
When set force_igmp_version to a value of 2, the kernel should only perform
multicast IGMPv2 operations (IETF rfc2236).  An host-initiated Join message
will be sent as a IGMPv2 Join message.  But if a IGMPv3 query message is
received, the host responds with a IGMPv3 join message.  Per rfc3376 and
rfc2236, a IGMPv2 host should treat a IGMPv3 query as a IGMPv2 query and
respond with an IGMPv2 Join message.

*Consequences*:
This is an issue when a IGMPv3 capable switch is the querier and will only
issue IGMPv3 queries (which double as IGMPv2 querys) and there's an
intermediate switch that is only IGMPv2 capable.  The intermediate switch
processes the initial v2 Join, but fails to recognize the IGMPv3 Join responses
to the Query, resulting in a dropped connection when the intermediate v2-only
switch times it out.

*Identifying issue in the kernel source*:
The issue is in this section of code (in net/ipv4/igmp.c), which is called when
an IGMP query is received  (from mainline 2.6.36-rc3 gitweb):
 ...
A IGMPv3 query has a length >= 12 and no sources.  This routine will exit after
line 880, setting the general query timer (random timeout between 0 and query
response time).  This calls igmp_gq_timer_expire():
...
.. which only sends a v3 response.  So if a v3 query is received, the kernel
always sends a v3 response.

IGMP queries happen once every 60 sec (per vlan), so the traffic is low.  A
IGMPv3 query *is* a strict superset of a IGMPv2 query, so this patch properly
short circuit's the v3 behaviour.

One issue is that this does not address force_igmp_version=1.  Then again, I've
never seen any IGMPv1 multicast equipment in the wild.  However there is a lot
of v2-only equipment. If it's necessary to support the IGMPv1 case as well:

837         if (len == 8 || IGMP_V2_SEEN(in_dev) || IGMP_V1_SEEN(in_dev)) {
Signed-off-by: David S. Miller <davem@davemloft.net>

Smatch complains because we check whether "pch->chan" is NULL and then
dereference it unconditionally on the next line.  Partly the reason this
bug was introduced is because code was too complicated.  I've simplified
it a little.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The members of struct llc_sock are unsigned so if we pass a negative
value for "opt" it can cause a sign bug.  Also it can cause an integer
overflow when we multiply "opt * HZ".

CC: stable@kernel.org
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The list_head conversion unearther an unnecessary flow
check.  Since flow is always NULL here we don't need to
see if a matching flow exists already.
Reported-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The 'wwan' devtype is meant for devices that require preconfiguration
and *every* time setup before the ethernet interface can be used, like
cellular modems which require a series of setup commands on serial ports
or other mechanisms before the ethernet interface will handle packets.

As ipheth only requires one-per-hotplug pairing setup with no
preconfiguration (like APN, phone #, etc) and the network interface is
usable at any time after that initial setup, remove the incorrect
devtype wwan.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a list_has_sctp_addr function to simplify loop

Based on a patches by Dan Carpenter and David Miller
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use netdev_alloc_skb_ip_align() helper and do correct allocation
Tested-by: Abraham Arce <x0066660@ti.com>
Signed-off-by: Abraham Arce <x0066660@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit 30fff923 introduced in linux-2.6.33 (udp: bind() optimisation)
added a secondary hash on UDP, hashed on (local addr, local port).

Problem is that following sequence :

fd = socket(...)
connect(fd, &remote, ...)

not only selects remote end point (address and port), but also sets
local address, while UDP stack stored in secondary hash table the socket
while its local address was INADDR_ANY (or ipv6 equivalent)

Sequence is :
 - autobind() : choose a random local port, insert socket in hash tables
              [while local address is INADDR_ANY]
 - connect() : set remote address and port, change local address to IP
              given by a route lookup.

When an incoming UDP frame comes, if more than 10 sockets are found in
primary hash table, we switch to secondary table, and fail to find
socket because its local address changed.

One solution to this problem is to rehash datagram socket if needed.

We add a new rehash(struct socket *) method in "struct proto", and
implement this method for UDP v4 & v6, using a common helper.

This rehashing only takes care of secondary hash table, since primary
hash (based on local port only) is not changed.
Reported-by: Krzysztof Piotr Oledzki <ole@ans.pl>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Tested-by: Krzysztof Piotr Oledzki <ole@ans.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

Blackhole routes are used when xfrm_lookup() returns -EREMOTE (error
triggered by IKE for example), hence this kind of route is always
temporary and so we should check if a better route exists for next
packets.
Bug has been introduced by commit d11a4dc1.
Signed-off-by: Jianzhao Wang <jianzhao.wang@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Hi,
Here is one more of these warnings and a patch below:

Sep  5 23:52:33 del kernel: [46044.244833] ===================================================
Sep  5 23:52:33 del kernel: [46044.269681] [ INFO: suspicious rcu_dereference_check() usage. ]
Sep  5 23:52:33 del kernel: [46044.277000] ---------------------------------------------------
Sep  5 23:52:33 del kernel: [46044.285185] net/ipv4/fib_trie.c:1756 invoked rcu_dereference_check() without protection!
Sep  5 23:52:33 del kernel: [46044.293627]
Sep  5 23:52:33 del kernel: [46044.293632] other info that might help us debug this:
Sep  5 23:52:33 del kernel: [46044.293634]
Sep  5 23:52:33 del kernel: [46044.325333]
Sep  5 23:52:33 del kernel: [46044.325335] rcu_scheduler_active = 1, debug_locks = 0
Sep  5 23:52:33 del kernel: [46044.348013] 1 lock held by pppd/1717:
Sep  5 23:52:33 del kernel: [46044.357548]  #0:  (rtnl_mutex){+.+.+.}, at: [<c125dc1f>] rtnl_lock+0xf/0x20
Sep  5 23:52:33 del kernel: [46044.367647]
Sep  5 23:52:33 del kernel: [46044.367652] stack backtrace:
Sep  5 23:52:33 del kernel: [46044.387429] Pid: 1717, comm: pppd Not tainted 2.6.35.4.4a #3
Sep  5 23:52:33 del kernel: [46044.398764] Call Trace:
Sep  5 23:52:33 del kernel: [46044.409596]  [<c12f9aba>] ? printk+0x18/0x1e
Sep  5 23:52:33 del kernel: [46044.420761]  [<c1053969>] lockdep_rcu_dereference+0xa9/0xb0
Sep  5 23:52:33 del kernel: [46044.432229]  [<c12b7235>] trie_firstleaf+0x65/0x70
Sep  5 23:52:33 del kernel: [46044.443941]  [<c12b74d4>] fib_table_flush+0x14/0x170
Sep  5 23:52:33 del kernel: [46044.455823]  [<c1033e92>] ? local_bh_enable_ip+0x62/0xd0
Sep  5 23:52:33 del kernel: [46044.467995]  [<c12fc39f>] ? _raw_spin_unlock_bh+0x2f/0x40
Sep  5 23:52:33 del kernel: [46044.480404]  [<c12b24d0>] ? fib_sync_down_dev+0x120/0x180
Sep  5 23:52:33 del kernel: [46044.493025]  [<c12b069d>] fib_flush+0x2d/0x60
Sep  5 23:52:33 del kernel: [46044.505796]  [<c12b06f5>] fib_disable_ip+0x25/0x50
Sep  5 23:52:33 del kernel: [46044.518772]  [<c12b10d3>] fib_netdev_event+0x73/0xd0
Sep  5 23:52:33 del kernel: [46044.531918]  [<c1048dfd>] notifier_call_chain+0x2d/0x70
Sep  5 23:52:33 del kernel: [46044.545358]  [<c1048f0a>] raw_notifier_call_chain+0x1a/0x20
Sep  5 23:52:33 del kernel: [46044.559092]  [<c124f687>] call_netdevice_notifiers+0x27/0x60
Sep  5 23:52:33 del kernel: [46044.573037]  [<c124faec>] __dev_notify_flags+0x5c/0x80
Sep  5 23:52:33 del kernel: [46044.586489]  [<c124fb47>] dev_change_flags+0x37/0x60
Sep  5 23:52:33 del kernel: [46044.599394]  [<c12a8a8d>] devinet_ioctl+0x54d/0x630
Sep  5 23:52:33 del kernel: [46044.612277]  [<c12aabb7>] inet_ioctl+0x97/0xc0
Sep  5 23:52:34 del kernel: [46044.625208]  [<c123f6af>] sock_ioctl+0x6f/0x270
Sep  5 23:52:34 del kernel: [46044.638046]  [<c109d2b0>] ? handle_mm_fault+0x420/0x6c0
Sep  5 23:52:34 del kernel: [46044.650968]  [<c123f640>] ? sock_ioctl+0x0/0x270
Sep  5 23:52:34 del kernel: [46044.663865]  [<c10c3188>] vfs_ioctl+0x28/0xa0
Sep  5 23:52:34 del kernel: [46044.676556]  [<c10c38fa>] do_vfs_ioctl+0x6a/0x5c0
Sep  5 23:52:34 del kernel: [46044.688989]  [<c1048676>] ? up_read+0x16/0x30
Sep  5 23:52:34 del kernel: [46044.701411]  [<c1021376>] ? do_page_fault+0x1d6/0x3a0
Sep  5 23:52:34 del kernel: [46044.714223]  [<c10b6588>] ? fget_light+0xf8/0x2f0
Sep  5 23:52:34 del kernel: [46044.726601]  [<c1241f98>] ? sys_socketcall+0x208/0x2c0
Sep  5 23:52:34 del kernel: [46044.739140]  [<c10c3eb3>] sys_ioctl+0x63/0x70
Sep  5 23:52:34 del kernel: [46044.751967]  [<c12fca3d>] syscall_call+0x7/0xb
Sep  5 23:52:34 del kernel: [46044.764734]  [<c12f0000>] ? cookie_v6_check+0x3d0/0x630

-------------->

This patch fixes the warning:
 ===================================================
 [ INFO: suspicious rcu_dereference_check() usage. ]
 ---------------------------------------------------
 net/ipv4/fib_trie.c:1756 invoked rcu_dereference_check() without protection!

 other info that might help us debug this:

 rcu_scheduler_active = 1, debug_locks = 0
 1 lock held by pppd/1717:
  #0:  (rtnl_mutex){+.+.+.}, at: [<c125dc1f>] rtnl_lock+0xf/0x20

 stack backtrace:
 Pid: 1717, comm: pppd Not tainted 2.6.35.4a #3
 Call Trace:
  [<c12f9aba>] ? printk+0x18/0x1e
  [<c1053969>] lockdep_rcu_dereference+0xa9/0xb0
  [<c12b7235>] trie_firstleaf+0x65/0x70
  [<c12b74d4>] fib_table_flush+0x14/0x170
  ...

Allow trie_firstleaf() to be called either under rcu_read_lock()
protection or with RTNL held. The same annotation is added to
node_parent_rcu() to prevent a similar warning a bit later.

Followup of commits 634a4b20 and 4eaa0e3c.
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

niu_get_ethtool_tcam_all() assumes that its output buffer is the right
size, and warns before returning if it is not.  However, the output
buffer size is under user control and ETHTOOL_GRXCLSRLALL is an
unprivileged ethtool command.  Therefore this is at least a local
denial-of-service vulnerability.

Change it to check before writing each entry and to return an error if
the buffer is already full.

Compile-tested only.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

- Do not create expectation when forwarding the PORT
  command to avoid blocking the connection. The problem is that
  nf_conntrack_ftp.c:help() tries to create the same expectation later in
  POST_ROUTING and drops the packet with "dropping packet" message after
  failure in nf_ct_expect_related.

- Change ip_vs_update_conntrack to alter the conntrack
  for related connections from real server. If we do not alter the reply in
  this direction the next packet from client sent to vport 20 comes as NEW
  connection. We alter it but may be some collision happens for both
  conntracks and the second conntrack gets destroyed immediately. The
  connection stucks too.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

The patch: "gro: fix different skb headrooms" in its part:
"2) allocate a minimal skb for head of frag_list" is buggy. The copied
skb has p->data set at the ip header at the moment, and skb_gro_offset
is the length of ip + tcp headers. So, after the change the length of
mac header is skipped. Later skb_set_mac_header() sets it into the
NET_SKB_PAD area (if it's long enough) and ip header is misaligned at
NET_SKB_PAD + NET_IP_ALIGN offset. There is no reason to assume the
original skb was wrongly allocated, so let's copy it as it was.

bugzilla : https://bugzilla.kernel.org/show_bug.cgi?id=16626
fixes commit: 3d3be433Reported-by: Plamen Petrov <pvp-lsts@fs.uni-ruse.bg>
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
CC: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Tested-by: Plamen Petrov <pvp-lsts@fs.uni-ruse.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: bus speed strings should be const
  PCI hotplug: Fix build with CONFIG_ACPI unset
  PCI: PCIe: Remove the port driver module exit routine
  PCI: PCIe: Move PCIe PME code to the pcie directory
  PCI: PCIe: Disable PCIe port services during port initialization
  PCI: PCIe: Ask BIOS for control of all native services at once
  ACPI/PCI: Negotiate _OSC control bits before requesting them
  ACPI/PCI: Do not preserve _OSC control bits returned by a query
  ACPI/PCI: Make acpi_pci_query_osc() return control bits
  ACPI/PCI: Reorder checks in acpi_pci_osc_control_set()
  PCI: PCIe: Introduce commad line switch for disabling port services
  PCI: PCIe AER: Introduce pci_aer_available()
  x86/PCI: only define pci_domain_nr if PCI and PCI_DOMAINS are set
  PCI: provide stub pci_domain_nr function for !CONFIG_PCI configs

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: Make fiemap work with sparse files
  xfs: prevent 32bit overflow in space reservation
  xfs: Disallow 32bit project quota id
  xfs: improve buffer cache hash scalability

* 'for-linus' of git://android.kernel.org/kernel/tegra:
  [ARM] tegra: Add ZRELADDR default for ARCH_TEGRA

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6:
  alpha: Fix printk format errors
  alpha: convert perf_event to use local_t
  Fix call to replaced SuperIO functions
  alpha: remove homegrown L1_CACHE_ALIGN macro

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  9p: potential ERR_PTR() dereference

* 'for-linus' of git://neil.brown.name/md:
  md: resolve confusion of MD_CHANGE_CLEAN
  md: don't clear MD_CHANGE_CLEAN in md_update_sb() for external arrays
  Move .gitignore from drivers/md to lib/raid6

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  Revert "hwrng: n2-drv - remove casts from void*"
  crypto: testmgr - Default to no tests
  crypto: testmgr - Fix test disabling option
  crypto: hash - Fix handling of small unaligned buffers

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/pseries: Correct rtas_data_buf locking in dlpar code
  powerpc/85xx: Add P1021 PCI IDs and quirks
  arch/powerpc/sysdev/qe_lib/qe.c: Add of_node_put to avoid memory leak
  arch/powerpc/platforms/83xx/mpc837x_mds.c: Add missing iounmap
  fsl_rio: fix compile errors
  powerpc/85xx: Fix compile issue with p1022_ds due to lmb rename to memblock
  powerpc/85xx: Fix compilation of mpc85xx_mds.c
  powerpc: Don't use kernel stack with translation off
  powerpc/perf_event: Reduce latency of calling perf_event_do_pending
  powerpc/kexec: Adds correct calling convention for kexec purgatory

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: fix a mismatch between code and comment
  percpu: fix a memory leak in pcpu_extend_area_map()
  percpu: add __percpu notations to UP allocator
  percpu: handle __percpu notations in UP accessors