- 29 May, 2019 11 commits
-
-
Jian Shen authored
The ifdef condition of function hclge_add_fd_entry_by_arfs() is unnecessary. It may cause compile warning when CONFIG_RFS_ACCEL is not chosen. This patch fixes it by removing the ifdef condition. Fixes: d93ed94f ("net: hns3: add aRFS support for PF") Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Xue Chaojing authored
in set_rx_mode, __dev_mc_sync and netdev_for_each_mc_addr will repeatedly set the multicast mac address. so we delete this loop. Signed-off-by:
Xue Chaojing <xuechaojing@huawei.com> Signed-off-by:
-
David S. Miller authored
Eric Dumazet says: ==================== inet: frags: followup to 'inet-frags-avoid-possible-races-at-netns-dismantle' Latest patch series ('inet-frags-avoid-possible-races-at-netns-dismantle') brought another syzbot report shown in the third patch changelog. While fixing the issue, I had to call inet_frags_fini() later in IPv6 and ilowpan. Also I believe a completion is needed to ensure proper dismantle at module removal. ==================== Signed-off-by: -
Eric Dumazet authored
As caught by syzbot [1], the rcu grace period that is respected before fqdir_rwork_fn() proceeds and frees fqdir is not enough to prevent inet_frag_destroy_rcu() being run after the freeing. We need a proper rcu_barrier() synchronization to replace the one we had in inet_frags_fini() We also have to fix a potential problem at module removal : inet_frags_fini() needs to make sure that all queued work queues (fqdir_rwork_fn) have completed, otherwise we might call kmem_cache_destroy() too soon and get another use-after-free. [1] BUG: KASAN: use-after-free in inet_frag_destroy_rcu+0xd9/0xe0 net/ipv4/inet_fragment.c:201 Read of size 8 at addr ffff88806ed47a18 by task swapper/1/0 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.2.0-rc1+ #2 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:188 __kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 kasan_report+0x12/0x20 mm/kasan/common.c:614 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:132 inet_frag_destroy_rcu+0xd9/0xe0 net/ipv4/inet_fragment.c:201 __rcu_reclaim kernel/rcu/rcu.h:222 [inline] rcu_do_batch kernel/rcu/tree.c:2092 [inline] invoke_rcu_callbacks kernel/rcu/tree.c:2310 [inline] rcu_core+0xba5/0x1500 kernel/rcu/tree.c:2291 __do_softirq+0x25c/0x94c kernel/softirq.c:293 invoke_softirq kernel/softirq.c:374 [inline] irq_exit+0x180/0x1d0 kernel/softirq.c:414 exiting_irq arch/x86/include/asm/apic.h:536 [inline] smp_apic_timer_interrupt+0x13b/0x550 arch/x86/kernel/apic/apic.c:1068 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:806 </IRQ> RIP: 0010:native_safe_halt+0xe/0x10 arch/x86/include/asm/irqflags.h:61 Code: ff ff 48 89 df e8 f2 95 8c fa eb 82 e9 07 00 00 00 0f 00 2d e4 45 4b 00 f4 c3 66 90 e9 07 00 00 00 0f 00 2d d4 45 4b 00 fb f4 <c3> 90 55 48 89 e5 41 57 41 56 41 55 41 54 53 e8 8e 18 42 fa e8 99 RSP: 0018:ffff8880a98e7d78 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff13 RAX: 1ffffffff1164e11 RBX: ffff8880a98d4340 RCX: 0000000000000000 RDX: dffffc0000000000 RSI: 0000000000000006 RDI: ffff8880a98d4bbc RBP: ffff8880a98e7da8 R08: ffff8880a98d4340 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 R13: ffffffff88b27078 R14: 0000000000000001 R15: 0000000000000000 arch_cpu_idle+0xa/0x10 arch/x86/kernel/process.c:571 default_idle_call+0x36/0x90 kernel/sched/idle.c:94 cpuidle_idle_call kernel/sched/idle.c:154 [inline] do_idle+0x377/0x560 kernel/sched/idle.c:263 cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:354 start_secondary+0x34e/0x4c0 arch/x86/kernel/smpboot.c:267 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243 Allocated by task 8877: save_stack+0x23/0x90 mm/kasan/common.c:71 set_track mm/kasan/common.c:79 [inline] __kasan_kmalloc mm/kasan/common.c:489 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:462 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:503 kmem_cache_alloc_trace+0x151/0x750 mm/slab.c:3555 kmalloc include/linux/slab.h:547 [inline] kzalloc include/linux/slab.h:742 [inline] fqdir_init include/net/inet_frag.h:115 [inline] ipv6_frags_init_net+0x48/0x460 net/ipv6/reassembly.c:513 ops_init+0xb3/0x410 net/core/net_namespace.c:130 setup_net+0x2d3/0x740 net/core/net_namespace.c:316 copy_net_ns+0x1df/0x340 net/core/net_namespace.c:439 create_new_namespaces+0x400/0x7b0 kernel/nsproxy.c:107 unshare_nsproxy_namespaces+0xc2/0x200 kernel/nsproxy.c:206 ksys_unshare+0x440/0x980 kernel/fork.c:2692 __do_sys_unshare kernel/fork.c:2760 [inline] __se_sys_unshare kernel/fork.c:2758 [inline] __x64_sys_unshare+0x31/0x40 kernel/fork.c:2758 do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 17: save_stack+0x23/0x90 mm/kasan/common.c:71 set_track mm/kasan/common.c:79 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:451 kasan_slab_free+0xe/0x10 mm/kasan/common.c:459 __cache_free mm/slab.c:3432 [inline] kfree+0xcf/0x220 mm/slab.c:3755 fqdir_rwork_fn+0x33/0x40 net/ipv4/inet_fragment.c:154 process_one_work+0x989/0x1790 kernel/workqueue.c:2269 worker_thread+0x98/0xe40 kernel/workqueue.c:2415 kthread+0x354/0x420 kernel/kthread.c:255 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352 The buggy address belongs to the object at ffff88806ed47a00 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 24 bytes inside of 512-byte region [ffff88806ed47a00, ffff88806ed47c00) The buggy address belongs to the page: page:ffffea0001bb51c0 refcount:1 mapcount:0 mapping:ffff8880aa400940 index:0x0 flags: 0x1fffc0000000200(slab) raw: 01fffc0000000200 ffffea000282a788 ffffea0001bb53c8 ffff8880aa400940 raw: 0000000000000000 ffff88806ed47000 0000000100000006 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88806ed47900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88806ed47980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88806ed47a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88806ed47a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88806ed47b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 3c8fc878 ("inet: frags: rework rhashtable dismantle") Signed-off-by:Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Eric Dumazet authored
Both IPv6 and 6lowpan are calling inet_frags_fini() too soon. inet_frags_fini() is dismantling a kmem_cache, that might be needed later when unregister_pernet_subsys() eventually has to remove frags queues from hash tables and free them. This fixes potential use-after-free, and is a prereq for the following patch. Fixes: d4ad4d22 ("inet: frags: use kmem_cache for inet_frag_queue") Signed-off-by:
-
Eric Dumazet authored
fqdir_init() is not fast path and is getting bigger. Signed-off-by:
-
Willem de Bruijn authored
Test the IPv6 flowlabel control and datapath interfaces: Acquire and release the right to use flowlabels with socket option IPV6_FLOWLABEL_MGR. Then configure flowlabels on send and read them on recv with cmsg IPV6_FLOWINFO. Also verify auto-flowlabel if not explicitly set. This helped identify the issue fixed in commit 95c16925 ("ipv6: invert flowlabel sharing check in process and user mode") Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Camelia Groza authored
Add support to configure multiple prioritized TX traffic classes with mqprio. Configure one BD ring per TC for the moment, one netdev queue per TC. Signed-off-by:
Camelia Groza <camelia.groza@nxp.com> Signed-off-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by:
-
David S. Miller authored
Neil Armstrong says: ==================== net: stmmac: dwmac-meson: update with SPDX Licence identifier Update the SPDX Licence identifier for the Amlogic Meson6 and Meson8 dwmac glue drivers. ==================== Signed-off-by: -
Neil Armstrong authored
Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Reviewed-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
-
Neil Armstrong authored
Signed-off-by:
-
- 28 May, 2019 2 commits
-
-
Madalin Bucur authored
The keygen extracted fields are used as input for the hash that determines the incoming frames distribution. Adding IPSEC SPI so different IPSEC flows can be distributed to different CPUs. Signed-off-by:
Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by:
-
Maxime Chevallier authored
Make sure we don't use an out-of-bound index for the per-port RSS context array. As of today, the global context creation in mvpp22_rss_context_create will prevent us from reaching this case, but we should still make sure we are using a sane value anyway. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
-
- 27 May, 2019 11 commits
-
-
Y.b. Lu authored
Fix blow sparse warning introduced by a previous patch. - restricted __le32 degrades to integer - restricted __le16 degrades to integer Fixes: d3982312 ("enetc: add hardware timestamping support") Signed-off-by:
Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by:
-
Heiner Kallweit authored
RTL_GIGA_MAC_VER_01 is RTL8169, the ancestor of the chip family. It didn't have an internal PHY and I've never seen it in the wild. What isn't there doesn't need to be maintained, so let's remove support for it. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Heiner Kallweit authored
Certain parts of the PHY initialization are the same for sub versions 1 and 2 of RTL8168d. So let's factor this out to simplify the code. Signed-off-by:
-
David S. Miller authored
Heiner Kallweit says: ==================== r8169: small improvements Series with small improvements. ==================== Signed-off-by: -
Heiner Kallweit authored
Use the appropriate enum type for member mac_version. And don't assign a fixed value to RTL_GIGA_MAC_NONE, there's no benefit in it. Signed-off-by:
-
Heiner Kallweit authored
Remove not needed return statement. Signed-off-by:
-
Heiner Kallweit authored
rtl_hw_init_8168ep() can be removed, this simplifies the code. Signed-off-by:
-
YueHaibing authored
Fix sparse warning: drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:6216:14: warning: symbol 't4_get_tp_e2c_map' was not declared. Should it be static? Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
David Ahern authored
I was really surprised that the IPv6 mtu exception followed by redirect test was passing as nothing about the code suggests it should. The problem is actually with the logic in the test script. Fix the test cases as follows: 1. add debug function to dump the initial and redirect gateway addresses for ipv6. This is shown only in verbose mode. It helps verify the output of 'route get'. 2. fix the check_exception logic for the reset case to make sure that for IPv4 neither mtu nor redirect appears in the 'route get' output. For IPv6, make sure mtu is not present and the gateway is the initial R1 lladdr. 3. fix the reset logic by using a function to delete the routes added by initial_route_*. This format works better for the nexthop version of the tests. While improving the test cases, go ahead and ensure that forwarding is disabled since IPv6 redirect requires it. Also, runs with kernel debugging enabled sometimes show a failure with one of the ipv4 tests, so spread the pings over longer time interval. The end result is that 2 tests now show failures: TEST: IPv6: mtu exception plus redirect [FAIL] and the VRF version. This is a bug in the IPv6 logic that will need to be fixed separately. Redirect followed by MTU works because __ip6_rt_update_pmtu hits the 'if (!rt6_cache_allowed_for_pmtu(rt6))' path and updates the mtu on the exception rt6_info. MTU followed by redirect does not have this logic. rt6_do_redirect creates a new exception and then rt6_insert_exception removes the old one which has the MTU exception. Fixes: ec810535 ("selftests: Add redirect tests") Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Colin Ian King authored
The pointer n is being assigned a value however this value is never read in the code block and the end of the code block continues to the next loop iteration. Clean up the code by removing the redundant assignment. Fixes: 1bff1a0c ("ipv4: Add function to send route updates") Addresses-Coverity: ("Unused value") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
-
Heiner Kallweit authored
PHY drivers don't have to and shouldn't fiddle with phylib internals. Most of the code in bcm87xx_config_init() can be removed because phylib takes care. In addition I replaced usage of PHY_10GBIT_FEC_FEATURES with an implementation of the get_features callback. PHY_10GBIT_FEC_FEATURES is used by this driver only and it's questionable whether there will be any other PHY supporting this mode only. Having said that in one of the next kernel versions we may decide to remove it. Signed-off-by:
-
- 26 May, 2019 16 commits
-
-
David S. Miller authored
Eric Dumazet says: ==================== inet: frags: avoid possible races at netns dismantle This patch series fixes a race happening on netns dismantle with frag queues. While rhashtable_free_and_destroy() is running, concurrent timers might run inet_frag_kill() and attempt rhashtable_remove_fast() calls. This is not allowed by rhashtable logic. Since I do not want to add expensive synchronize_rcu() calls in the netns dismantle path, I had to no longer inline netns_frags structures, but dynamically allocate them. The ten first patches make this preparation, so that the last patch clearly shows the fix. As this patch series is not exactly trivial, I chose to target 5.3. We will backport it once soaked a bit. ==================== Signed-off-by: -
Eric Dumazet authored
syszbot found an interesting use-after-free [1] happening while IPv4 fragment rhashtable was destroyed at netns dismantle. While no insertions can possibly happen at the time a dismantling netns is destroying this rhashtable, timers can still fire and attempt to remove elements from this rhashtable. This is forbidden, since rhashtable_free_and_destroy() has no synchronization against concurrent inserts and deletes. Add a new fqdir->dead flag so that timers do not attempt a rhashtable_remove_fast() operation. We also have to respect an RCU grace period before starting the rhashtable_free_and_destroy() from process context, thus we use rcu_work infrastructure. This is a refinement of a prior rough attempt to fix this bug : https://marc.info/?l=linux-netdev&m=153845936820900&w=2 Since the rhashtable cleanup is now deferred to a work queue, netns dismantles should be slightly faster. [1] BUG: KASAN: use-after-free in __read_once_size include/linux/compiler.h:194 [inline] BUG: KASAN: use-after-free in rhashtable_last_table+0x162/0x180 lib/rhashtable.c:212 Read of size 8 at addr ffff8880a6497b70 by task kworker/0:0/5 CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.2.0-rc1+ #2 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events rht_deferred_worker Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:188 __kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 kasan_report+0x12/0x20 mm/kasan/common.c:614 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:132 __read_once_size include/linux/compiler.h:194 [inline] rhashtable_last_table+0x162/0x180 lib/rhashtable.c:212 rht_deferred_worker+0x111/0x2030 lib/rhashtable.c:411 process_one_work+0x989/0x1790 kernel/workqueue.c:2269 worker_thread+0x98/0xe40 kernel/workqueue.c:2415 kthread+0x354/0x420 kernel/kthread.c:255 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352 Allocated by task 32687: save_stack+0x23/0x90 mm/kasan/common.c:71 set_track mm/kasan/common.c:79 [inline] __kasan_kmalloc mm/kasan/common.c:489 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:462 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:503 __do_kmalloc_node mm/slab.c:3620 [inline] __kmalloc_node+0x4e/0x70 mm/slab.c:3627 kmalloc_node include/linux/slab.h:590 [inline] kvmalloc_node+0x68/0x100 mm/util.c:431 kvmalloc include/linux/mm.h:637 [inline] kvzalloc include/linux/mm.h:645 [inline] bucket_table_alloc+0x90/0x480 lib/rhashtable.c:178 rhashtable_init+0x3f4/0x7b0 lib/rhashtable.c:1057 inet_frags_init_net include/net/inet_frag.h:109 [inline] ipv4_frags_init_net+0x182/0x410 net/ipv4/ip_fragment.c:683 ops_init+0xb3/0x410 net/core/net_namespace.c:130 setup_net+0x2d3/0x740 net/core/net_namespace.c:316 copy_net_ns+0x1df/0x340 net/core/net_namespace.c:439 create_new_namespaces+0x400/0x7b0 kernel/nsproxy.c:107 unshare_nsproxy_namespaces+0xc2/0x200 kernel/nsproxy.c:206 ksys_unshare+0x440/0x980 kernel/fork.c:2692 __do_sys_unshare kernel/fork.c:2760 [inline] __se_sys_unshare kernel/fork.c:2758 [inline] __x64_sys_unshare+0x31/0x40 kernel/fork.c:2758 do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 7: save_stack+0x23/0x90 mm/kasan/common.c:71 set_track mm/kasan/common.c:79 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:451 kasan_slab_free+0xe/0x10 mm/kasan/common.c:459 __cache_free mm/slab.c:3432 [inline] kfree+0xcf/0x220 mm/slab.c:3755 kvfree+0x61/0x70 mm/util.c:460 bucket_table_free+0x69/0x150 lib/rhashtable.c:108 rhashtable_free_and_destroy+0x165/0x8b0 lib/rhashtable.c:1155 inet_frags_exit_net+0x3d/0x50 net/ipv4/inet_fragment.c:152 ipv4_frags_exit_net+0x73/0x90 net/ipv4/ip_fragment.c:695 ops_exit_list.isra.0+0xaa/0x150 net/core/net_namespace.c:154 cleanup_net+0x3fb/0x960 net/core/net_namespace.c:553 process_one_work+0x989/0x1790 kernel/workqueue.c:2269 worker_thread+0x98/0xe40 kernel/workqueue.c:2415 kthread+0x354/0x420 kernel/kthread.c:255 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352 The buggy address belongs to the object at ffff8880a6497b40 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 48 bytes inside of 1024-byte region [ffff8880a6497b40, ffff8880a6497f40) The buggy address belongs to the page: page:ffffea0002992580 refcount:1 mapcount:0 mapping:ffff8880aa400ac0 index:0xffff8880a64964c0 compound_mapcount: 0 flags: 0x1fffc0000010200(slab|head) raw: 01fffc0000010200 ffffea0002916e88 ffffea000218fe08 ffff8880aa400ac0 raw: ffff8880a64964c0 ffff8880a6496040 0000000100000005 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8880a6497a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880a6497a80: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc >ffff8880a6497b00: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ^ ffff8880a6497b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880a6497c00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 648700f7 ("inet: frags: use rhashtables for reassembly units") Signed-off-by:
-
Eric Dumazet authored
Following patch will add rcu grace period before fqdir rhashtable destruction, so we need to dynamically allocate fqdir structures to not force expensive synchronize_rcu() calls in netns dismantle path. Signed-off-by:
-
Eric Dumazet authored
fqdir will soon be dynamically allocated. We need to reach the struct net pointer from fqdir, so add it, and replace the various container_of() constructs by direct access to the new field. Signed-off-by:
-
Eric Dumazet authored
And pass an extra parameter, since we will soon dynamically allocate fqdir structures. Signed-off-by:
-
Eric Dumazet authored
(struct net *)->ieee802154_lowpan.fqdir will soon be a pointer, so make sure lowpan_frags_ns_ctl_table[] does not reference init_net. lowpan_frags_ns_sysctl_register() can perform the needed initialization for all netns. Signed-off-by:
-
Eric Dumazet authored
(struct net *)->nf_frag.fqdir will soon be a pointer, so make sure nf_ct_frag6_sysctl_table[] does not reference init_net. nf_ct_frag6_sysctl_register() can perform the needed initialization for all netns. Signed-off-by:
-
Eric Dumazet authored
(struct net *)->ipv6.fqdir will soon be a pointer, so make sure ip6_frags_ns_ctl_table[] does not reference init_net. ip6_frags_ns_ctl_register() can perform the needed initialization for all netns. Signed-off-by:
-
Eric Dumazet authored
(struct net *)->ipv4.fqdir will soon be a pointer, so make sure ip4_frags_ns_ctl_table[] does not reference init_net. ip4_frags_ns_ctl_register() can perform the needed initialization for all netns. Signed-off-by:
-
Eric Dumazet authored
Rename the @frags fields from structs netns_ipv4, netns_ipv6, netns_nf_frag and netns_ieee802154_lowpan to @fqdir Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
-
Eric Dumazet authored
1) struct netns_frags is renamed to struct fqdir This structure is really holding many frag queues in a hash table. 2) (struct inet_frag_queue)->net field is renamed to fqdir since net is generally associated to a 'struct net' pointer in networking stack. Signed-off-by:
-
Marek Vasut authored
Add driver for the NXP TJA1100 and TJA1101 PHYs. These PHYs are special BroadRReach 100BaseT1 PHYs used in automotive. Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Jean Delvare <jdelvare@suse.com> Cc: linux-hwmon@vger.kernel.org Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David S. Miller authored
Huazhong Tan says: ==================== net: hns3: add aRFS feature and fix FEC bugs for HNS3 driver This patchset adds some new features support and fixes some bugs: [Patch 1/4 - 3/4] adds support for aRFS [Patch 4/4] fix FEC configuration issue ==================== Signed-off-by: -
Jian Shen authored
The FEC capbility may be changed with port speed changes. Driver needs to read the active FEC mode, and update FEC capability when port speed changes. Fixes: 7e6ec914 ("net: hns3: add support for FEC encoding control") Signed-off-by:
-
Jian Shen authored
This patch adds aRFS support for PF. The aRFS rules are also stored in the hardware flow director table, Use the existing filter management functions to insert TCPv4/UDPv4/TCPv6/UDPv6 flow director filters. To avoid rule conflict, once user adds flow director rules with ethtool, the aRFS will be disabled, and clear exist aRFS rules. Once all user configure rules were removed, aRFS can work again. Signed-off-by:
-
