Pull iommufd fixes from Jason Gunthorpe:

 - Fix dirty tracking bitmap collection when using reporting bitmaps
   that are not neatly aligned to u64's or match the IO page table radix
   tree layout.

 - Add self tests to cover the cases that were found to be broken.

 - Add missing enforcement of invalidation type in the uapi.

 - Fix selftest config generation

* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
  selftests/iommu: fix the config fragment
  iommufd: Reject non-zero data_type if no data_len is provided
  iommufd/iova_bitmap: Consider page offset for the pages to be pinned
  iommufd/selftest: Add mock IO hugepages tests
  iommufd/selftest: Hugepage mock domain support
  iommufd/selftest: Refactor mock_domain_read_and_clear_dirty()
  iommufd/selftest: Refactor dirty bitmap tests
  iommufd/iova_bitmap: Handle recording beyond the mapped pages
  iommufd/selftest: Test u64 unaligned bitmaps
  iommufd/iova_bitmap: Switch iova_bitmap::bitmap to an u8 array
  iommufd/iova_bitmap: Bounds check mapped::pages access

Merge tag 'platform-drivers-x86-v6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:
 "Regression fixes:

   - Fix INT0002 vGPIO events no longer working after 6.8 ACPI SCI
     changes

   - AMD-PMF: Fix laptops (e.g. Framework 13 AMD) hanging on suspend

   - x86-android-tablets: Fix touchscreen no longer working on Lenovo
     Yogabook

   - x86-android-tablets: Fix serdev instantiation regression

   - intel-vbtn: Fix ThinkPad X1 Tablet Gen2 no longer suspending

  Bug fixes:

   - think-lmi: Fix changing BIOS settings on Lenovo workstations

   - touchscreen_dmi: Fix Hi8 Air touchscreen data sometimes missing

   - AMD-PMF: Fix Smart PC support not working after suspend/resume

  Other misc small fixes"

* tag 'platform-drivers-x86-v6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: thinkpad_acpi: Only update profile if successfully converted
  platform/x86: intel-vbtn: Stop calling "VBDL" from notify_handler
  platform/x86: x86-android-tablets: Fix acer_b1_750_goodix_gpios name
  platform/x86: x86-android-tablets: Fix serdev instantiation no longer working
  platform/x86: Add new get_serdev_controller() helper
  platform/x86: x86-android-tablets: Fix keyboard touchscreen on Lenovo Yogabook1 X90
  platform/x86/amd/pmf: Fix a potential race with policy binary sideload
  platform/x86/amd/pmf: Fixup error handling for amd_pmf_init_smart_pc()
  platform/x86/amd/pmf: Add debugging message for missing policy data
  platform/x86/amd/pmf: Fix a suspend hang on Framework 13
  platform/x86/amd/pmf: Fix TEE enact command failure after suspend and resume
  platform/x86/amd/pmf: Remove smart_pc_status enum
  platform/x86: touchscreen_dmi: Consolidate Goodix upside-down touchscreen data
  platform/x86: touchscreen_dmi: Allow partial (prefix) matches for ACPI names
  platform/x86: intel: int0002_vgpio: Pass IRQF_ONESHOT to request_irq()
  platform/x86: think-lmi: Fix password opcode ordering for workstations

Pull clk fixes from Stephen Boyd:
 "Here are some Samsung clk driver fixes I've been sitting on for far
  too long.

  They fix the bindings and clk driver for the Google GS101 SoC"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: samsung: clk-gs101: comply with the new dt cmu_misc clock names
  dt-bindings: clock: gs101: rename cmu_misc clock-names

Pull vfs fixes from Christian Brauner:

 - Fix a memory leak in cachefiles

 - Restrict aio cancellations to I/O submitted through the aio
   interfaces as this is otherwise causing issues for I/O submitted
   via io_uring

 - Increase buffer for afs volume status to avoid overflow

 - Fix a missing zero-length check in unbuffered writes in the
   netfs library. If generic_write_checks() returns zero make
   netfs_unbuffered_write_iter() return right away

 - Prevent a leak in i_dio_count caused by netfs_begin_read() operating
   past i_size. It will return early and leave i_dio_count incremented

 - Account for ipv4 addresses as well as ipv6 addresses when processing
   incoming callbacks in afs

* tag 'vfs-6.8-rc6.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaio
  afs: Increase buffer size in afs_update_volume_status()
  afs: Fix ignored callbacks over ipv4
  cachefiles: fix memory leak in cachefiles_add_cache()
  netfs: Fix missing zero-length check in unbuffered write
  netfs: Fix i_dio_count leak on DIO read past i_size

Pull networking fixes from Paolo Abeni:
 "Including fixes from bpf and netfilter.

  Current release - regressions:

   - af_unix: fix another unix GC hangup

  Previous releases - regressions:

   - core: fix a possible AF_UNIX deadlock

   - bpf: fix NULL pointer dereference in sk_psock_verdict_data_ready()

   - netfilter: nft_flow_offload: release dst in case direct xmit path
     is used

   - bridge: switchdev: ensure MDB events are delivered exactly once

   - l2tp: pass correct message length to ip6_append_data

   - dccp/tcp: unhash sk from ehash for tb2 alloc failure after
     check_estalblished()

   - tls: fixes for record type handling with PEEK

   - devlink: fix possible use-after-free and memory leaks in
     devlink_init()

  Previous releases - always broken:

   - bpf: fix an oops when attempting to read the vsyscall page through
     bpf_probe_read_kernel

   - sched: act_mirred: use the backlog for mirred ingress

   - netfilter: nft_flow_offload: fix dst refcount underflow

   - ipv6: sr: fix possible use-after-free and null-ptr-deref

   - mptcp: fix several data races

   - phonet: take correct lock to peek at the RX queue

  Misc:

   - handful of fixes and reliability improvements for selftests"

* tag 'net-6.8.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
  l2tp: pass correct message length to ip6_append_data
  net: phy: realtek: Fix rtl8211f_config_init() for RTL8211F(D)(I)-VD-CG PHY
  selftests: ioam: refactoring to align with the fix
  Fix write to cloned skb in ipv6_hop_ioam()
  phonet/pep: fix racy skb_queue_empty() use
  phonet: take correct lock to peek at the RX queue
  net: sparx5: Add spinlock for frame transmission from CPU
  net/sched: flower: Add lock protection when remove filter handle
  devlink: fix port dump cmd type
  net: stmmac: Fix EST offset for dwmac 5.10
  tools: ynl: don't leak mcast_groups on init error
  tools: ynl: make sure we always pass yarg to mnl_cb_run
  net: mctp: put sock on tag allocation failure
  netfilter: nf_tables: use kzalloc for hook allocation
  netfilter: nf_tables: register hooks last when adding new chain/flowtable
  netfilter: nft_flow_offload: release dst in case direct xmit path is used
  netfilter: nft_flow_offload: reset dst in route object after setting up flow
  netfilter: nf_tables: set dormant flag on hook register failure
  selftests: tls: add test for peeking past a record of a different type
  selftests: tls: add test for merging of same-type control messages
  ...

Pull tracing fix from Steven Rostedt:

 - While working on the ring buffer I noticed that the counter used for
   knowing where the end of the data is on a sub-buffer was not a full
   "int" but just 20 bits. It was masked out to 0xfffff.

   With the new code that allows the user to change the size of the
   sub-buffer, it is theoretically possible to ask for a size bigger
   than 2^20. If that happens, unexpected results may occur as there's
   no code checking if the counter overflowed the 20 bits of the write
   mask. There are other checks to make sure events fit in the
   sub-buffer, but if the sub-buffer itself is too big, that is not
   checked.

   Add a check in the resize of the sub-buffer to make sure that it
   never goes beyond the size of the counter that holds how much data is
   on it.

* tag 'trace-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  ring-buffer: Do not let subbuf be bigger than write mask

The config fragment doesn't follow the correct format to enable those
config options which make the config options getting missed while
merging with other configs.

➜ merge_config.sh -m .config tools/testing/selftests/iommu/config
Using .config as base
Merging tools/testing/selftests/iommu/config
➜ make olddefconfig
.config:5295:warning: unexpected data: CONFIG_IOMMUFD
.config:5296:warning: unexpected data: CONFIG_IOMMUFD_TEST

While at it, add CONFIG_FAULT_INJECTION as well which is needed for
CONFIG_IOMMUFD_TEST. If CONFIG_FAULT_INJECTION isn't present in base
config (such as x86 defconfig), CONFIG_IOMMUFD_TEST doesn't get enabled.

Fixes: 57f09887 ("iommufd: Add a selftest")
Link: https://lore.kernel.org/r/20240222074934.71380-1-usama.anjum@collabora.comSigned-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

l2tp_ip6_sendmsg needs to avoid accounting for the transport header
twice when splicing more data into an already partially-occupied skbuff.

To manage this, we check whether the skbuff contains data using
skb_queue_empty when deciding how much data to append using
ip6_append_data.

However, the code which performed the calculation was incorrect:

     ulen = len + skb_queue_empty(&sk->sk_write_queue) ? transhdrlen : 0;

...due to C operator precedence, this ends up setting ulen to
transhdrlen for messages with a non-zero length, which results in
corrupted packets on the wire.

Add parentheses to correct the calculation in line with the original
intent.

Fixes: 9d4c7580 ("ipv4, ipv6: Fix handling of transhdrlen in __ip{,6}_append_data()")
Cc: David Howells <dhowells@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240220122156.43131-1-tparkin@katalix.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) If user requests to wake up a table and hook fails, restore the
   dormant flag from the error path, from Florian Westphal.

2) Reset dst after transferring it to the flow object, otherwise dst
   gets released twice from the error path.

3) Release dst in case the flowtable selects a direct xmit path, eg.
   transmission to bridge port. Otherwise, dst is memleaked.

4) Register basechain and flowtable hooks at the end of the command.
   Error path releases these datastructure without waiting for the
   rcu grace period.

5) Use kzalloc() to initialize struct nft_hook to fix a KMSAN report
   on access to hook type, also from Florian Westphal.

netfilter pull request 24-02-22

* tag 'nf-24-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables: use kzalloc for hook allocation
  netfilter: nf_tables: register hooks last when adding new chain/flowtable
  netfilter: nft_flow_offload: release dst in case direct xmit path is used
  netfilter: nft_flow_offload: reset dst in route object after setting up flow
  netfilter: nf_tables: set dormant flag on hook register failure
====================

Link: https://lore.kernel.org/r/20240222000843.146665-1-pablo@netfilter.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Daniel Borkmann says:

====================
pull-request: bpf 2024-02-22

The following pull-request contains BPF updates for your *net* tree.

We've added 11 non-merge commits during the last 24 day(s) which contain
a total of 15 files changed, 217 insertions(+), 17 deletions(-).

The main changes are:

1) Fix a syzkaller-triggered oops when attempting to read the vsyscall
   page through bpf_probe_read_kernel and friends, from Hou Tao.

2) Fix a kernel panic due to uninitialized iter position pointer in
   bpf_iter_task, from Yafang Shao.

3) Fix a race between bpf_timer_cancel_and_free and bpf_timer_cancel,
   from Martin KaFai Lau.

4) Fix a xsk warning in skb_add_rx_frag() (under CONFIG_DEBUG_NET)
   due to incorrect truesize accounting, from Sebastian Andrzej Siewior.

5) Fix a NULL pointer dereference in sk_psock_verdict_data_ready,
   from Shigeru Yoshida.

6) Fix a resolve_btfids warning when bpf_cpumask symbol cannot be
   resolved, from Hari Bathini.

bpf-for-netdev

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf, sockmap: Fix NULL pointer dereference in sk_psock_verdict_data_ready()
  selftests/bpf: Add negtive test cases for task iter
  bpf: Fix an issue due to uninitialized bpf_iter_task
  selftests/bpf: Test racing between bpf_timer_cancel_and_free and bpf_timer_cancel
  bpf: Fix racing between bpf_timer_cancel_and_free and bpf_timer_cancel
  selftest/bpf: Test the read of vsyscall page under x86-64
  x86/mm: Disallow vsyscall page read for copy_from_kernel_nofault()
  x86/mm: Move is_vsyscall_vaddr() into asm/vsyscall.h
  bpf, scripts: Correct GPL license name
  xsk: Add truesize to skb_add_rx_frag().
  bpf: Fix warning for bpf_cpumask in verifier
====================

Link: https://lore.kernel.org/r/20240221231826.1404-1-daniel@iogearbox.netSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Commit bb726b75 ("net: phy: realtek: add support for
RTL8211F(D)(I)-VD-CG") extended support of the driver from the existing
support for RTL8211F(D)(I)-CG PHY to the newer RTL8211F(D)(I)-VD-CG PHY.

While that commit indicated that the RTL8211F_PHYCR2 register is not
supported by the "VD-CG" PHY model and therefore updated the corresponding
section in rtl8211f_config_init() to be invoked conditionally, the call to
"genphy_soft_reset()" was left as-is, when it should have also been invoked
conditionally. This is because the call to "genphy_soft_reset()" was first
introduced by the commit 0a4355c2 ("net: phy: realtek: add dt property
to disable CLKOUT clock") since the RTL8211F guide indicates that a PHY
reset should be issued after setting bits in the PHYCR2 register.

As the PHYCR2 register is not applicable to the "VD-CG" PHY model, fix the
rtl8211f_config_init() function by invoking "genphy_soft_reset()"
conditionally based on the presence of the "PHYCR2" register.

Fixes: bb726b75 ("net: phy: realtek: add support for RTL8211F(D)(I)-VD-CG")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240220070007.968762-1-s-vadapalli@ti.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Justin Iurman says:

====================
ioam6: fix write to cloned skb's

Make sure the IOAM data insertion is not applied on cloned skb's. As a
consequence, ioam selftests needed a refactoring.
====================

Link: https://lore.kernel.org/r/20240219135255.15429-1-justin.iurman@uliege.beSigned-off-by: Paolo Abeni <pabeni@redhat.com>

ioam6_parser uses a packet socket. After the fix to prevent writing to
cloned skb's, the receiver does not see its IOAM data anymore, which
makes input/forward ioam-selftests to fail. As a workaround,
ioam6_parser now uses an IPv6 raw socket and leverages ancillary data to
get hop-by-hop options. As a consequence, the hook is "after" the IOAM
data insertion by the receiver and all tests are working again.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

ioam6_fill_trace_data() writes inside the skb payload without ensuring
it's writeable (e.g., not cloned). This function is called both from the
input and output path. The output path (ioam6_iptunnel) already does the
check. This commit provides a fix for the input path, inside
ipv6_hop_ioam(). It also updates ip6_parse_tlv() to refresh the network
header pointer ("nh") when returning from ipv6_hop_ioam().

Fixes: 9ee11f0f ("ipv6: ioam: Data plane support for Pre-allocated Trace")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The receive queues are protected by their respective spin-lock, not
the socket lock. This could lead to skb_peek() unexpectedly
returning NULL or a pointer to an already dequeued socket buffer.

Fixes: 9641458d ("Phonet: Pipe End Point for Phonet Pipes protocol")
Signed-off-by: Rémi Denis-Courmont <courmisch@gmail.com>
Link: https://lore.kernel.org/r/20240218081214.4806-2-remi@remlab.netSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The receive queue is protected by its embedded spin-lock, not the
socket lock, so we need the former lock here (and only that one).

Fixes: 107d0d9b ("Phonet: Phonet datagram transport protocol")
Reported-by: Luosili <rootlab@huawei.com>
Signed-off-by: Rémi Denis-Courmont <courmisch@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240218081214.4806-1-remi@remlab.netSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Both registers used when doing manual injection or fdma injection are
shared between all the net devices of the switch. It was noticed that
when having two process which each of them trying to inject frames on
different ethernet ports, that the HW started to behave strange, by
sending out more frames then expected. When doing fdma injection it is
required to set the frame in the DCB and then make sure that the next
pointer of the last DCB is invalid. But because there is no locks for
this, then easily this pointer between the DCB can be broken and then it
would create a loop of DCBs. And that means that the HW will
continuously transmit these frames in a loop. Until the SW will break
this loop.
Therefore to fix this issue, add a spin lock for when accessing the
registers for manual or fdma injection.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Fixes: f3cad261 ("net: sparx5: add hostmode with phylink support")
Link: https://lore.kernel.org/r/20240219080043.1561014-1-horatiu.vultur@microchip.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

As IDR can't protect itself from the concurrent modification, place
idr_remove() under the protection of tp->lock.

Fixes: 08a0063d ("net/sched: flower: Move filter handle initialization earlier")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20240220085928.9161-1-jianbol@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Unlike other commands, due to a c&p error, port dump fills-up cmd with
wrong value, different from port-get request cmd, port-get doit reply
and port notification.

Fix it by filling cmd with value DEVLINK_CMD_PORT_NEW.

Skimmed through devlink userspace implementations, none of them cares
about this cmd value. Only ynl, for which, this is actually a fix, as it
expects doit and dumpit ops rsp_value to be the same.

Omit the fixes tag, even thought this is fix, better to target this for
next release.

Fixes: bfcd3a46 ("Introduce devlink infrastructure")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20240220075245.75416-1-jiri@resnulli.usSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Fix EST offset for dwmac 5.10.

Currently configuring Qbv doesn't work as expected. The schedule is
configured, but never confirmed:

|[  128.250219] imx-dwmac 428a0000.ethernet eth1: configured EST

The reason seems to be the refactoring of the EST code which set the wrong
EST offset for the dwmac 5.10. After fixing this it works as before:

|[  106.359577] imx-dwmac 428a0000.ethernet eth1: configured EST
|[  128.430715] imx-dwmac 428a0000.ethernet eth1: EST: SWOL has been switched

Tested on imx93.

Fixes: c3f3b972 ("net: stmmac: Refactor EST implementation")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20240220-stmmac_est-v1-1-c41f9ae2e7b7@linutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Jakub Kicinski says:

====================
tools: ynl: fix impossible errors

Fix bugs discovered while I was hacking in low level stuff in YNL
and kept breaking the socket, exercising the "impossible" error paths.

v1: https://lore.kernel.org/all/20240217001742.2466993-1-kuba@kernel.org/
====================

Link: https://lore.kernel.org/r/20240220161112.2735195-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Make sure to free the already-parsed mcast_groups if
we don't get an ack from the kernel when reading family info.
This is part of the ynl_sock_create() error path, so we won't
get a call to ynl_sock_destroy() to free them later.

Fixes: 86878f14 ("tools: ynl: user space helpers")
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240220161112.2735195-3-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There is one common error handler in ynl - ynl_cb_error().
It expects priv to be a pointer to struct ynl_parse_arg AKA yarg.
To avoid potential crashes if we encounter a stray NLMSG_ERROR
always pass yarg as priv (or a struct which has it as the first
member).

ynl_cb_null() has a similar problem directly - it expects yarg
but priv passed by the caller is ys.

Found by code inspection.

Fixes: 86878f14 ("tools: ynl: user space helpers")
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240220161112.2735195-2-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

We may hold an extra reference on a socket if a tag allocation fails: we
optimistically allocate the sk_key, and take a ref there, but do not
drop if we end up not using the allocated key.

Ensure we're dropping the sock on this failure by doing a proper unref
rather than directly kfree()ing.

Fixes: de8a6b15 ("net: mctp: add an explicit reference from a mctp_sk_key to sock")
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/ce9b61e44d1cdae7797be0c5e3141baf582d23a0.1707983487.git.jk@codeconstruct.com.auSigned-off-by: Jakub Kicinski <kuba@kernel.org>

KMSAN reports unitialized variable when registering the hook,
   reg->hook_ops_type == NF_HOOK_OP_BPF)
        ~~~~~~~~~~~ undefined

This is a small structure, just use kzalloc to make sure this
won't happen again when new fields get added to nf_hook_ops.

Fixes: 7b4b2fa3 ("netfilter: annotate nf_tables base hook ops")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Register hooks last when adding chain/flowtable to ensure that packets do
not walk over datastructure that is being released in the error path
without waiting for the rcu grace period.

Fixes: 91c7b38d ("netfilter: nf_tables: use new transaction infrastructure to handle chain")
Fixes: 3b49e2e9 ("netfilter: nf_tables: add flow table netlink frontend")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Direct xmit does not use it since it calls dev_queue_xmit() to send
packets, hence it calls dst_release().

kmemleak reports:

unreferenced object 0xffff88814f440900 (size 184):
  comm "softirq", pid 0, jiffies 4294951896
  hex dump (first 32 bytes):
    00 60 5b 04 81 88 ff ff 00 e6 e8 82 ff ff ff ff  .`[.............
    21 0b 50 82 ff ff ff ff 00 00 00 00 00 00 00 00  !.P.............
  backtrace (crc cb2bf5d6):
    [<000000003ee17107>] kmem_cache_alloc+0x286/0x340
    [<0000000021a5de2c>] dst_alloc+0x43/0xb0
    [<00000000f0671159>] rt_dst_alloc+0x2e/0x190
    [<00000000fe5092c9>] __mkroute_output+0x244/0x980
    [<000000005fb96fb0>] ip_route_output_flow+0xc0/0x160
    [<0000000045367433>] nf_ip_route+0xf/0x30
    [<0000000085da1d8e>] nf_route+0x2d/0x60
    [<00000000d1ecd1cb>] nft_flow_route+0x171/0x6a0 [nft_flow_offload]
    [<00000000d9b2fb60>] nft_flow_offload_eval+0x4e8/0x700 [nft_flow_offload]
    [<000000009f447dbb>] expr_call_ops_eval+0x53/0x330 [nf_tables]
    [<00000000072e1be6>] nft_do_chain+0x17c/0x840 [nf_tables]
    [<00000000d0551029>] nft_do_chain_inet+0xa1/0x210 [nf_tables]
    [<0000000097c9d5c6>] nf_hook_slow+0x5b/0x160
    [<0000000005eccab1>] ip_forward+0x8b6/0x9b0
    [<00000000553a269b>] ip_rcv+0x221/0x230
    [<00000000412872e5>] __netif_receive_skb_one_core+0xfe/0x110

Fixes: fa502c86 ("netfilter: flowtable: simplify route logic")
Reported-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

dst is transferred to the flow object, route object does not own it
anymore.  Reset dst in route object, otherwise if flow_offload_add()
fails, error path releases dst twice, leading to a refcount underflow.

Fixes: a3c90f7a ("netfilter: nf_tables: flow offload expression")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

We need to set the dormant flag again if we fail to register
the hooks.

During memory pressure hook registration can fail and we end up
with a table marked as active but no registered hooks.

On table/base chain deletion, nf_tables will attempt to unregister
the hook again which yields a warn splat from the nftables core.

Reported-and-tested-by: syzbot+de4025c006ec68ac56fc@syzkaller.appspotmail.com
Fixes: 179d9ba5 ("netfilter: nf_tables: fix table flag updates")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Sabrina Dubroca says:

====================
tls: fixes for record type handling with PEEK

There are multiple bugs in tls_sw_recvmsg's handling of record types
when MSG_PEEK flag is used, which can lead to incorrectly merging two
records:
 - consecutive non-DATA records shouldn't be merged, even if they're
   the same type (partly handled by the test at the end of the main
   loop)
 - records of the same type (even DATA) shouldn't be merged if one
   record of a different type comes in between
====================

Link: https://lore.kernel.org/r/cover.1708007371.git.sd@queasysnail.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If we queue 3 records:
 - record 1, type DATA
 - record 2, some other type
 - record 3, type DATA
the current code can look past the 2nd record and merge the 2 data
records.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/4623550f8617c239581030c13402d3262f2bd14f.1708007371.git.sd@queasysnail.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Two consecutive control messages of the same type should never be
merged into one large received blob of data.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/018f1633d5471684c65def5fe390de3b15c3d683.1708007371.git.sd@queasysnail.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If we queue 3 records:
 - record 1, type DATA
 - record 2, some other type
 - record 3, type DATA
and do a recv(PEEK), the rx_list will contain the first two records.

The next large recv will walk through the rx_list and copy data from
record 1, then stop because record 2 is a different type. Since we
haven't filled up our buffer, we will process the next available
record. It's also DATA, so we can merge it with the current read.

We shouldn't do that, since there was a record in between that we
ignored.

Add a flag to let process_rx_list inform tls_sw_recvmsg that it had
more data available.

Fixes: 692d7b5d ("tls: Fix recvmsg() to be able to peek across multiple records")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/f00c0c0afa080c60f016df1471158c1caf983c34.1708007371.git.sd@queasysnail.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If we have a non-DATA record on the rx_list and another record of the
same type still on the queue, we will end up merging them:
 - process_rx_list copies the non-DATA record
 - we start the loop and process the first available record since it's
   of the same type
 - we break out of the loop since the record was not DATA

Just check the record type and jump to the end in case process_rx_list
did some work.

Fixes: 692d7b5d ("tls: Fix recvmsg() to be able to peek across multiple records")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/bd31449e43bd4b6ff546f5c51cf958c31c511deb.1708007371.git.sd@queasysnail.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

PEEK needs to leave decrypted records on the rx_list so that we can
receive them later on, so it jumps back into the async code that
queues the skb. Unfortunately that makes us skip the
TLS_RECORD_TYPE_DATA check at the bottom of the main loop, so if two
records of the same (non-DATA) type are queued, we end up merging
them.

Add the same record type check, and make it unlikely to not penalize
the async fastpath. Async decrypt only applies to data record, so this
check is only needed for PEEK.

process_rx_list also has similar issues.

Fixes: 692d7b5d ("tls: Fix recvmsg() to be able to peek across multiple records")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/3df2eef4fdae720c55e69472b5bea668772b45a2.1708007371.git.sd@queasysnail.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The gtp_net_ops pernet operations structure for the subsystem must be
registered before registering the generic netlink family.

Syzkaller hit 'general protection fault in gtp_genl_dump_pdp' bug:

general protection fault, probably for non-canonical address
0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
CPU: 1 PID: 5826 Comm: gtp Not tainted 6.8.0-rc3-std-def-alt1 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-alt1 04/01/2014
RIP: 0010:gtp_genl_dump_pdp+0x1be/0x800 [gtp]
Code: c6 89 c6 e8 64 e9 86 df 58 45 85 f6 0f 85 4e 04 00 00 e8 c5 ee 86
      df 48 8b 54 24 18 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80>
      3c 02 00 0f 85 de 05 00 00 48 8b 44 24 18 4c 8b 30 4c 39 f0 74
RSP: 0018:ffff888014107220 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000002 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff88800fcda588 R14: 0000000000000001 R15: 0000000000000000
FS:  00007f1be4eb05c0(0000) GS:ffff88806ce80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1be4e766cf CR3: 000000000c33e000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
 <TASK>
 ? show_regs+0x90/0xa0
 ? die_addr+0x50/0xd0
 ? exc_general_protection+0x148/0x220
 ? asm_exc_general_protection+0x22/0x30
 ? gtp_genl_dump_pdp+0x1be/0x800 [gtp]
 ? __alloc_skb+0x1dd/0x350
 ? __pfx___alloc_skb+0x10/0x10
 genl_dumpit+0x11d/0x230
 netlink_dump+0x5b9/0xce0
 ? lockdep_hardirqs_on_prepare+0x253/0x430
 ? __pfx_netlink_dump+0x10/0x10
 ? kasan_save_track+0x10/0x40
 ? __kasan_kmalloc+0x9b/0xa0
 ? genl_start+0x675/0x970
 __netlink_dump_start+0x6fc/0x9f0
 genl_family_rcv_msg_dumpit+0x1bb/0x2d0
 ? __pfx_genl_family_rcv_msg_dumpit+0x10/0x10
 ? genl_op_from_small+0x2a/0x440
 ? cap_capable+0x1d0/0x240
 ? __pfx_genl_start+0x10/0x10
 ? __pfx_genl_dumpit+0x10/0x10
 ? __pfx_genl_done+0x10/0x10
 ? security_capable+0x9d/0xe0

Cc: stable@vger.kernel.org
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Fixes: 459aa660 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Link: https://lore.kernel.org/r/20240214162733.34214-1-kovalev@altlinux.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull kvm fixes from Paolo Bonzini:
 "Two fixes for ARM ITS emulation. Unmapped interrupts were used instead
  of ignored, causing NULL pointer dereferences"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: arm64: vgic-its: Test for valid IRQ in MOVALL handler
  KVM: arm64: vgic-its: Test for valid IRQ in its_sync_lpi_pending_table()

Pull btrfs fixes from David Sterba:

 - Fix a deadlock in fiemap.

   There was a big lock around the whole operation that can interfere
   with a page fault and mkwrite.

   Reducing the lock scope can also speed up fiemap

 - Fix range condition for extent defragmentation which could lead to
   worse layout in some cases

* tag 'for-6.8-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix deadlock with fiemap and extent locking
  btrfs: defrag: avoid unnecessary defrag caused by incorrect extent size

Pull crypto fix from Herbert Xu:
 "Fix a stack overflow in virtio"

* tag 'v6.8-p4' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: virtio/akcipher - Fix stack overflow on memcpy

syzbot reported the following NULL pointer dereference issue [1]:

  BUG: kernel NULL pointer dereference, address: 0000000000000000
  [...]
  RIP: 0010:0x0
  [...]
  Call Trace:
   <TASK>
   sk_psock_verdict_data_ready+0x232/0x340 net/core/skmsg.c:1230
   unix_stream_sendmsg+0x9b4/0x1230 net/unix/af_unix.c:2293
   sock_sendmsg_nosec net/socket.c:730 [inline]
   __sock_sendmsg+0x221/0x270 net/socket.c:745
   ____sys_sendmsg+0x525/0x7d0 net/socket.c:2584
   ___sys_sendmsg net/socket.c:2638 [inline]
   __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667
   do_syscall_64+0xf9/0x240
   entry_SYSCALL_64_after_hwframe+0x6f/0x77

If sk_psock_verdict_data_ready() and sk_psock_stop_verdict() are called
concurrently, psock->saved_data_ready can be NULL, causing the above issue.

This patch fixes this issue by calling the appropriate data ready function
using the sk_psock_data_ready() helper and protecting it from concurrency
with sk->sk_callback_lock.

Fixes: 6df7f764 ("bpf, sockmap: Wake up polling after data copy")
Reported-by: syzbot+fd7b34375c1c8ce29c93@syzkaller.appspotmail.com
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: syzbot+fd7b34375c1c8ce29c93@syzkaller.appspotmail.com
Acked-by: John Fastabend <john.fastabend@gmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=fd7b34375c1c8ce29c93 [1]
Link: https://lore.kernel.org/bpf/20240218150933.6004-1-syoshida@redhat.com