- 06 Apr, 2021 37 commits
-
-
Sreekanth Reddy authored
Whenever the driver is adding a vSES to virtual-phys list it is reinitializing the list head. Hence those vSES devices which were added previously are lost. Stop reinitializing the list every time a new vSES device is added. Link: https://lore.kernel.org/r/20210330105004.20413-1-sreekanth.reddy@broadcom.com Cc: stable@vger.kernel.org #v5.11.10+ Signed-off-by:
Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Konstantin Shelekhin authored
Create the device for the virtual LUN 0 using the DUMMY flag. This change makes it possible to remove some special-casing in the INQUIRY code. Link: https://lore.kernel.org/r/20210322200938.53300-3-k.shelekhin@yadro.comReviewed-by:
Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by:
Mike Christie <michael.christie@oracle.com> Signed-off-by:
Konstantin Shelekhin <k.shelekhin@yadro.com> Signed-off-by:
-
Konstantin Shelekhin authored
This commit adds the DUMMY flag to the rd_mcp backend that forces a logical unit to report itself as not connected device of an unknown type. Essentially this allows users to create devices identical to the device for the virtual LUN 0, making it possible to explicitly create a LUN 0 device and configure its WWNs (e.g. vendor or product name). Link: https://lore.kernel.org/r/20210322200938.53300-2-k.shelekhin@yadro.comReviewed-by:
-
Ewan D. Milne authored
Some arrays return ILLEGAL_REQUEST with ASC 00h if they don't support the RTPG extended header so remove the check for INVALID FIELD IN CDB. Link: https://lore.kernel.org/r/20210331201154.20348-1-emilne@redhat.comReviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
-
John Pittman authored
Due to the frequency that alua_rtpg() is called, the path group info print within can print the same info multiple times in the logs, subsequent prints adding no new information or value. To reproduce: # modprobe scsi_debug vpd_use_hostno=0 # systemctl start multipathd.service To fix, check stored values, only printing at alua attach/activate and if any of the values change. Link: https://lore.kernel.org/r/20210331181656.5046-1-jpittman@redhat.comReviewed-by:David Jeffery <djeffery@redhat.com> Reviewed-by:
Laurence Oberman <loberman@redhat.com> Signed-off-by:
John Pittman <jpittman@redhat.com> Signed-off-by:
-
Don Brace authored
Update version. Link: https://lore.kernel.org/r/161549387469.25025.12859568843576080076.stgit@brunhildaReviewed-by:
Scott Benesh <scott.benesh@microchip.com> Reviewed-by:
Gerry Morong <gerry.morong@microchip.com> Reviewed-by:
Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by:
Scott Teel <scott.teel@microchip.com> Reviewed-by:
Kevin Barnett <kevin.barnett@microchip.com> Reviewed-by:
Martin Wilck <mwilck@suse.com> Signed-off-by:
Don Brace <don.brace@microchip.com> Signed-off-by:
-
Kevin Barnett authored
Add support for newer hardware. Link: https://lore.kernel.org/r/161549386882.25025.2594251735886014958.stgit@brunhildaReviewed-by:
-
Kevin Barnett authored
Correct system hangs when resuming from hibernation after first successful hibernation/resume cycle. Rare condition involving OFA. Note: Suspend/resume is not supported on many platforms. It was originally intended for workstations. Link: https://lore.kernel.org/r/161549386295.25025.14555840632114761610.stgit@brunhildaReviewed-by:
-
Murthy Bhat authored
Update enclosure identifier field corresponding to physical devices in lsscsi/sysfs. During device add the SCSI devtype is filled in during slave_configure(). However, when pqi_scsi_update_device() runs (REGNEWD) the firmware returns zero for the SCSI devtype field, and valid devtype is overwritten by zero. Due to this, lsscsi output shows wrong values. Link: https://lore.kernel.org/r/161549385708.25025.17234953506918043750.stgit@brunhildaReviewed-by:
Murthy Bhat <Murthy.Bhat@microchip.com> Signed-off-by:
-
Kevin Barnett authored
LUN resets can take longer to complete. Adding in more driver logging helps show where the driver is in the reset process. Add a timeout in pqi_device_wait_for_pending_io() to cap how long the driver will wait for outstanding commands. Link: https://lore.kernel.org/r/161549385119.25025.10366493975709358647.stgit@brunhildaReviewed-by:
Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com> Reviewed-by:
-
Murthy Bhat authored
Export valid sas initiator_port_protocols and target_port_protocols to sysfs. Needed for lsscsi to show correct values. Link: https://lore.kernel.org/r/161549384532.25025.1469409935400845385.stgit@brunhildaReviewed-by:
-
Murthy Bhat authored
Display topology using PHY numbers. PHY (both local and remote) numbers corresponding to physical drives are read from BMIC_IDENTIFY_PHYSICAL_DEVICE. Link: https://lore.kernel.org/r/161549383947.25025.16977895345376485056.stgit@brunhildaReviewed-by:
-
Kevin Barnett authored
The entire Linux kernel has been slowly migrating from snprintf() to scnprintf(), so we are doing our part. This article explains the rationale for this change: https: //lwn.net/Articles/69419/ Link: https://lore.kernel.org/r/161549383357.25025.12363435617789964291.stgit@brunhildaReviewed-by:
-
Kevin Barnett authored
- Synchronize OFA and controller offline events. Prevent I/O during the above conditions. - Cleanup pqi_device_wait_for_pending_io() by checking the device->scsi_cmds_outstanding instead of walking the device's list of commands. - Stop failing all I/O for all devices. This was causing OS to retry them, delaying OFA. - Clean up cache flush. The controller is checked for offline status in lower level functions. Link: https://lore.kernel.org/r/161549382770.25025.789855864026860170.stgit@brunhildaReviewed-by:
-
Kevin Barnett authored
Change return type from EINPROGRESS to EBUSY to signal applications to retry a REGNEWD if the driver cannot process the REGNEWD. Events such as OFA, suspend, and shutdown return EINPROGRESS if a scan is currently running. This prevents applications from immediately retrying REGNEWD. Schedule a new REGNEWD if system low on memory. Link: https://lore.kernel.org/r/161549382157.25025.16054784597622125373.stgit@brunhildaReviewed-by:
-
Kevin Barnett authored
OFA, Online Firmware Activation, allows users to update firmware without a reboot. - Change OFA setup to a worker thread - Delay soft resets - Add OFA event handler to allow FW to initiate OFA - Add in-memory allocation to OFA events - Update OFA buffer size calculations - Add ability to cancel OFA events - Update OFA quiesce/un-quiesce - Prevent Kernel crashes while issuing ioctl during OFA - Returned EBUSY for pass-through IOCTLs throughout all stages of OFA - Add mutex to prevent parallel OFA updates. Link: https://lore.kernel.org/r/161549381563.25025.2647205502550052197.stgit@brunhildaReviewed-by:
-
Kevin Barnett authored
Simplify AIO retry management by removing retry list and list management. Need to retry is already set in the response status. Also remove the bypass worker thread. Accelerated I/O requests bypass the RAID engine and go directly to either an HBA disk or to a physical component of a RAID volume. Link: https://lore.kernel.org/r/161549380976.25025.11776487034357231156.stgit@brunhildaReviewed-by:
-
Kevin Barnett authored
For suspend/resume and shutdown prevent: Controller events, any new I/O requests, controller requests, REGNEWD, and reset operations. Wait for any pending completions from the controller to complete to avoid controller NMI events. Link: https://lore.kernel.org/r/161549380398.25025.12266769502766103580.stgit@brunhildaReviewed-by:
-
Kevin Barnett authored
Remove some flags used to check for device resets already in progress. Allow only 1 reset operation at a time for the host. Link: https://lore.kernel.org/r/161549379810.25025.10194117431886743795.stgit@brunhildaReviewed-by:
-
Kevin Barnett authored
Cleanup soft reset code for Online Firmware Activation (OFA). OFA allows controller firmware updates without a reboot. OFA updates require an on-line controller reset to activate the updated firmware. There were some missing actions for some of the reset cases. The controller is first set back to sis mode before returning to pqi mode. Check to ensure the controller is in sis mode. Release QRM memory (OFA buffer) on OFA error conditions. Clean up controller state which can cause a kernel panic upon reboot after an unsuccessful OFA. Link: https://lore.kernel.org/r/161549379215.25025.10654441314249183621.stgit@brunhildaReviewed-by:
-
Kevin Barnett authored
Change the data types for event_id and additional_event_id. Link: https://lore.kernel.org/r/161549378628.25025.14338046567871170916.stgit@brunhildaReviewed-by:
-
Kevin Barnett authored
WWID has been added to Report Physical LUNs in newer controller firmware. The presence of this field is detected by a feature bit. Add detection of this new feature and store the WWID when set. Link: https://lore.kernel.org/r/161549378041.25025.3869709982357729841.stgit@brunhildaReviewed-by:
-
Kevin Barnett authored
Remove timeouts for driver-initiated commands. Responses to internal requests can take longer than hard coded timeout values and the driver will still have an outstanding request that may complete in the future with no context. Link: https://lore.kernel.org/r/161549377451.25025.12306492868851801623.stgit@brunhildaReviewed-by:
-
Kevin Barnett authored
Controller does not support SCSI WRITE SAME for NVMe drives in HBA mode Link: https://lore.kernel.org/r/161549376866.25025.5961694654342018260.stgit@brunhildaReviewed-by:
-
Don Brace authored
Allow R5/R6 stream detection to be disabled/enabled using sysfs entry enable_stream_detection. Example usage: lsscsi [2:2:0:0] storage Adaptec 3258P-32i /e 0010 ^ | +---- NOTE: here host is host2 find /sys -name \*enable_stream\* /sys/devices/pci0000:36/0000:36:00.0/0000:37:00.0/0000:38:00.0/0000:39:00.0/host2/scsi_host/host2/enable_stream_detection /sys/devices/pci0000:5b/0000:5b:00.0/0000:5c:00.0/host3/scsi_host/host3/enable_stream_detection Current stream detection: cat /sys/devices/pci0000:36/0000:36:00.0/0000:37:00.0/0000:38:00.0/0000:39:00.0/host2/scsi_host/host2/enable_stream_detection 1 Turn off stream detection: echo 0 > /sys/devices/pci0000:36/0000:36:00.0/0000:37:00.0/0000:38:00.0/0000:39:00.0/host2/scsi_host/host2/enable_stream_detection Turn on stream detection: echo 1 > /sys/devices/pci0000:36/0000:36:00.0/0000:37:00.0/0000:38:00.0/0000:39:00.0/host2/scsi_host/host2/enable_stream_detection Link: https://lore.kernel.org/r/161549376281.25025.1132304698441513738.stgit@brunhildaReviewed-by:
-
Don Brace authored
Enhance performance by adding sequential stream detection for RAID5/RAID6 sequential write requests. Reduce stripe lock contention with full-stripe write operations. There is one common stripe lock for each RAID volume that can be set by either the RAID engine or the AIO engine. The AIO path has I/O request sizes well below the stripe size resulting in many Read-Modify-Write operations. Sending the request to the RAID engine allows for coalescing requests into full stripe operations resulting in reduced Read-Modify-Write operations. Link: https://lore.kernel.org/r/161549375693.25025.2962141451773219796.stgit@brunhildaReviewed-by:
-
Kevin Barnett authored
Reduce differences between out-of-box driver and kernel.org driver. No functional changes. Link: https://lore.kernel.org/r/161549375094.25025.9268879575316758510.stgit@brunhildaReviewed-by:
-
Kevin Barnett authored
Add support for new "long" firmware version which requires minor driver changes to expose. Link: https://lore.kernel.org/r/161549374508.25025.15467221395888158022.stgit@brunhildaReviewed-by:
-
Kevin Barnett authored
Determine support for supported features from BMIC sense feature command instead of config table. Enable features such as: RAID 1/5/6 write support, SATA wwid, and encryption. Link: https://lore.kernel.org/r/161549373914.25025.7999816178098103135.stgit@brunhildaReviewed-by:
-
Don Brace authored
Add RAID1 write IU and implement RAID1 write support. Change brand names ADM/ADG to TRIPLE/RAID-6. Link: https://lore.kernel.org/r/161549373324.25025.2441592111049564780.stgit@brunhildaReviewed-by:
-
Don Brace authored
Add in new IU definition and implement support for RAID5 and RAID6 writes. Link: https://lore.kernel.org/r/161549372734.25025.963261942897080281.stgit@brunhildaReviewed-by:
-
Don Brace authored
Factor out code common to all scatter-gather list building to prepare for new AIO functionality. AIO (Accelerated I/O) requests go directly to disk No functional changes. Link: https://lore.kernel.org/r/161549372147.25025.9706613054649682229.stgit@brunhildaReviewed-by:
-
Don Brace authored
Refactor aio submission code: 1. Break up function pqi_raid_bypass_submit_scsi_cmd() into smaller functions. 2. Add common block (rmd - raid_map_data) to carry around into newly added functions. 3. Prepare for new AIO functionality. No functional changes. Link: https://lore.kernel.org/r/161549371553.25025.8840958689316611074.stgit@brunhildaReviewed-by: -
Kevin Barnett authored
Add support for newer hardware by adding in a product identifier. This identifier can then be used to check for the hardware generation. Link: https://lore.kernel.org/r/161549370966.25025.2968242206975557607.stgit@brunhildaReviewed-by:
-
Murthy Bhat authored
While failing queued I/Os in TMF path, there was a request leak and hence stale entries in request pool with ref count being non-zero. In shutdown path we have a BUG_ON to catch stuck I/O either in firmware or in the driver. The stale requests caused a system crash. The I/O request pool leakage also lead to a significant performance drop. Link: https://lore.kernel.org/r/161549370379.25025.12793264112620796062.stgit@brunhildaReviewed-by:
-
Don Brace authored
Correct SCSI midlayer sending more requests than exposed host queue depth causing firmware ASSERT and lockup issues by enabling host-wide tags. Note: This also results in better performance. Link: https://lore.kernel.org/r/161549369787.25025.8975999483518581619.stgit@brunhildaSuggested-by:
Ming Lei <ming.lei@redhat.com> Suggested-by:
John Garry <john.garry@huawei.com> Reviewed-by:
-
Martin K. Petersen authored
Pull 5.12/scsi-fixes into the 5.13 SCSI tree to provide a baseline for some UFS changes that would otherwise cause conflicts during the merge. Signed-off-by:
-
- 02 Apr, 2021 3 commits
-
-
Gustavo A. R. Silva authored
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use "flexible array members"[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. Refactor the code according to the use of a flexible-array member in struct _SGE_TRANSACTION32 instead of one-element array. Also, this helps with the ongoing efforts to enable -Warray-bounds by fixing the following warning: CC [M] drivers/message/fusion/mptlan.o drivers/message/fusion/mptlan.c: In function ‘mpt_lan_sdu_send’: drivers/message/fusion/mptlan.c:759:28: warning: array subscript 1 is above array bounds of ‘U32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds] 759 | pTrans->TransactionDetails[1] = cpu_to_le32((mac[2] << 24) | | ~~~~~~~~~~~~~~~~~~~~~~~~~~^~~ [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arrays Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/109 Link: https://lore.kernel.org/r/20210324233344.GA99059@embeddedorSigned-off-by:Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Gustavo A. R. Silva authored
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use "flexible array members"[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. Also, this helps with the ongoing efforts to enable -Warray-bounds by fixing the following warning: drivers/message/fusion/mptbase.c: In function ‘mptbase_reply’: drivers/message/fusion/mptbase.c:7747:62: warning: array subscript 1 is above array bounds of ‘U32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds] 7747 | ioc->events[idx].data[ii] = le32_to_cpu(pEventReply->Data[ii]); ./include/uapi/linux/byteorder/little_endian.h:34:51: note: in definition of macro ‘__le32_to_cpu’ 34 | #define __le32_to_cpu(x) ((__force __u32)(__le32)(x)) | ^ drivers/message/fusion/mptbase.c:7747:33: note: in expansion of macro ‘le32_to_cpu’ 7747 | ioc->events[idx].data[ii] = le32_to_cpu(pEventReply->Data[ii]); | [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arrays Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/109 Link: https://lore.kernel.org/r/20210324230036.GA67851@embeddedorSigned-off-by: -
Arnd Bergmann authored
An old cleanup changed the array size from MAX_ADDR_LEN to unspecified in the declaration, but now gcc-11 warns about this: drivers/scsi/fcoe/fcoe_ctlr.c:1972:37: error: argument 1 of type ‘unsigned char[32]’ with mismatched bound [-Werror=array-parameter=] 1972 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], | ~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~ In file included from /git/arm-soc/drivers/scsi/fcoe/fcoe_ctlr.c:33: include/scsi/libfcoe.h:252:37: note: previously declared as ‘unsigned char[]’ 252 | u64 fcoe_wwn_from_mac(unsigned char mac[], unsigned int, unsigned int); | ~~~~~~~~~~~~~~^~~~~ Change the type back to what the function definition uses. Link: https://lore.kernel.org/r/20210322164702.957810-1-arnd@kernel.org Fixes: fdd78027 ("[SCSI] fcoe: cleans up libfcoe.h and adds fcoe.h for fcoe module") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
