Remove unused #defines, structure, and inlined functions for the
rtl8192e driver.  Compile tested only.
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds in-kernel firmware loading support and removes
support for the original userland firmware loading process.
Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Renames driver file dgap_driver.c and dgap_driver.h to
dgap.c and dgap.h because we are now single source and
include file and better fits kernel naming conventions.
Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch makes all merged and original functions static to dgap.c.
Doing so has revealed more dead code via gcc warnings.
Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a lot of cleanup work to do on these digi drivers and merging as
much as is possible will make it easier. I also notice that many merged
drivers are single source and header.
Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a lot of cleanup work to do on these digi drivers and merging as
much as is possible will make it easier. I also notice that many merged
drivers are single source and header.
Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a lot of cleanup work to do on these digi drivers and merging as
much as is possible will make it easier. I also notice that many merged
drivers are single source and header.
Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a lot of cleanup work to do on these digi drivers and merging as
much as is possible will make it easier. I also notice that many merged
drivers are single source and header.
Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a lot of cleanup work to do on these digi drivers and merging as
much as is possible will make it easier. I also notice that many merged
drivers are single source and header.
Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a lot of cleanup work to do on these digi drivers and merging as
much as is possible will make it easier. I also notice that many merged
drivers are single source and header.
Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a lot of cleanup work to do on these digi drivers and merging as
much as is possible will make it easier. I also notice that many merged
drivers are single source and header.
Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a lot of cleanup work to do on these digi drivers and merging as
much as is possible will make it easier. I also notice that many merged
drivers are single source and header.
Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a lot of cleanup work to do on these digi drivers and merging as
much as is possible will make it easier. I also notice that many merged
drivers are single source and header.
Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removes unneeded files dgap_trace.c and dgap_trace.h
Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a lot of cleanup work to do on these digi drivers and merging as
much as is possible will make it easier. I also notice that many merged
drivers are single source and header.
Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a lot of cleanup work to do on these digi drivers and merging as
much as is possible will make it easier. I also notice that many merged
drivers are single source and header.
Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a lot of cleanup work to do on these digi drivers and merging as
much as is possible will make it easier. I also notice that many merged
drivers are single source and header.
Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a lot of cleanup work to do on these digi drivers and merging as
much as is possible will make it easier. I also notice that many merged
drivers are single source and header.
Signed-off-by: Mark Hounschell <markh@compro.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes userland source code files downld.c and dgap_downld.h
Signed-off-by: Mark Hounschell <markh@compro.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes all the original CVS tags because they are in my way
Signed-off-by: Mark Hounschell <markh@compro.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a more clear explanation of the option in the prompt, and
make the config depend on ANDROID_BINDER_IPC being selected.

Also sets the default to y, which matches AOSP.

Cc: Colin Cross <ccross@android.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Serban Constantinescu <serban.constantinescu@arm.com>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For 64bit systems we want to use the same binder interface for 32bit and
64bit processes. Thus the size and the layout of the structures passed
between the kernel and the userspace has to be the same for both 32 and
64bit processes.

This change replaces all the uses of void* and size_t with
binder_uintptr_t and binder_size_t. These are then typedefed to specific
sizes depending on the use of the interface, as follows:
       * __u32 - on legacy 32bit only userspace
       * __u64 - on mixed 32/64bit userspace where all processes use the same
interface.

This change also increments the BINDER_CURRENT_PROTOCOL_VERSION to 8 and
hooks the compat_ioctl entry for the mixed 32/64bit Android userspace.

This patch also provides a CONFIG_ANDROID_BINDER_IPC_32BIT option for
compatability, which if set which enables the old protocol, setting
BINDER_CURRENT_PROTOCOL_VERSION to 7, on 32 bit systems.

Please note that all 64bit kernels will use the 64bit Binder ABI.

Cc: Colin Cross <ccross@android.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Serban Constantinescu <serban.constantinescu@arm.com>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Arve Hjønnevåg <arve@android.com>
[jstultz: Merged with upstream type changes. Various whitespace fixes
and longer Kconfig description for checkpatch. Included improved commit
message from Serban (with a few tweaks).]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

BC_REQUEST_DEATH_NOTIFICATION and BC_CLEAR_DEATH_NOTIFICATION were
defined with the wrong structure that did not match the code. Since a
binder pointer and handle are the same size on 32 bit systems, this
change does not affect them. The two commands claimed they were using
struct binder_ptr_cookie but they are using a 32bit handle and a pointer.

The main purpose of this patch is to add the binder_handle_cookie
struct so the service manager does not have to define its own version
(libbinder writes one field at a time so it does not use the struct).

On 32bit systems the payload size is the same as the size of struct
binder_ptr_cookie. On 64bit systems, the size does differ, and the
ioctl number does change. However, there are no known 64bit users of
this interface, and any 64bit systems will need the following patch to
run 32 bit processes anyway, so it is not expected that anyone will
ship a 64bit system without this change, so this change should not
affect any existing systems.

Cc: Colin Cross <ccross@android.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Serban Constantinescu <serban.constantinescu@arm.com>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Serban Constantinescu <serban.constantinescu@arm.com>
[jstultz: Few 80+ col fixes for checkpatch, improved commit message
with help from Serban, and included rational from Arve's email]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Russell writes:

These changes, which convert imx-drm to use the recently merged
component infrastructure, have been reviewed and acked by Philipp Zabel,
Shawn Guo and Fabio Estevam, and are now deemed to be ready.

We want those fixes here as well.

Add hotplug support.  We have to make the interrupt handler threaded so
we can call drm_helper_hpd_irq_event().  Keeping in mind that we will
want to share the interrupt with other HDMI interface drivers (eg, audio
and CEC) put the groundwork in now for that, rather than just using
IRQF_ONESHOT.

Also, we must not call drm_helper_hpd_irq_event() until we have fully
setup the connector; keep the interrupt(s) muted until after that point.
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Add core imx-drm support for hotplug connector support.  We need to
setup the poll helper after we've setup the connectors; the helper
scans the connectors to determine their capabilities.
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Various cleanups are possible after the previous round of changes; these
have no real functional bearing other than tidying up the code.
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

It is now no longer necessary to keep this structure around; we can
allocate it upon DRM driver load and destroy it thereafter without
affecting the other components now.
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

This mutex doesn't protect anything anymore; get rid of it.
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Since we're now operating like a conventional DRM driver, doing all
the initialisation within the driver's ->load callback, we don't
need to mess around with the mode groups - we can rely on the one
in the DRM platform code.
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

The core imx_drm_connector and imx_drm_encoder code is no longer
required - the connectors and encoders are all using the component
support, so we can remove this.
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Now that our bind function is only ever called during the main DRM
driver ->load callback, we don't need to have the imx_drm_connector or
imx_drm_encoder abstractions anymore.  So let's get rid of it, and move
the DRM connector and encoder setup into the connector support files.
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Provide two helper functions to assist with cleaning up imx-drm
connectors and encoders.
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Provide a helper function to parse possible crtcs before the encoder
is registered.  The crtc mask is derived from the position of the
CRTCs registered in the drm_device.
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

The component helper provides us the drm_device which is being
registered.  Rather than having to reference a global in imx-drm-core,
use this to get the imxdrm device, and also use it to register the CRTC
against.

This means we never have CRTCs/encoders/connectors without the drivers
private data being accessible.

Remove the module owner field as well; this provides no protection
against the device being unbound.
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

imx-fb.c doesn't need to be separate from imx-drm-core.c - all it is
doing is setting up the minimum and maximum sizes of the scanout
buffers, and setting up the mode_config function pointers.  Move the
contents into imx-drm-core.c and kill this file.
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Now that we know when the components of the imx-drm subsystem will be
initialised, we can move the fbdev helper initialisation and teardown
into imx-drm-core.  This gives us the required ordering that DRM wants
in both driver load and unload methods.

We can also stop exporting the imx_drm_device_get() and
imx_drm_device_put() methods; nothing but the fbdev helper was making
use of these.
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Delay publishing sysfs connector entries until all components have
initialised.  This reduces the probability of generating false hotplug
events when we're uncertain whether the driver can fully initialise.
This also pulls that code out of the individual imx-drm connector
drivers.
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Use the componentised device support for imx-drm.  This requires all
the sub-components and the master device to register with the component
device support.
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>