- 03 Dec, 2020 4 commits
-
-
Martin Cerveny authored
Allwinner V3s SoC contains video engine. Add compatible for it. Signed-off-by:
Martin Cerveny <m.cerveny@computer.org> Acked-by:
Chen-Yu Tsai <wens@csie.org> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Martin Cerveny authored
All codecs should have capabilities. For example "Allwinner V3s" does not support "MPEG2". Signed-off-by:
-
Daniel Lee Kruse authored
On AMD Family 15h (Models 30h-3fh), I/O Memory Management Unit RiSC engine sometimes stalls, requiring a reset. As result, MythTV and w-scan won't scan channels on the AMD Kaveri APU with the Hauppauge QuadHD TV tuner card. For the solution I added the Input/Output Memory Management Unit's PCI Identity of 0x1423 to the broken_dev_id[] array, which is used by a quirks logic meant to fix similar problems with other AMD chipsets. Signed-off-by:
Daniel Lee Kruse <daniel.lee.kruse@protonmail.com> Signed-off-by:
-
Rikard Falkeborn authored
These 'ops' structs are never modified, so make them const to allow the compiler to put them in read-only memory. Signed-off-by:
Rikard Falkeborn <rikard.falkeborn@gmail.com> Reviewed-by:
Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Signed-off-by:
-
- 02 Dec, 2020 36 commits
-
-
Hans Verkuil authored
To comply with the intended usage of the V4L2 selection target when used to retrieve a sensor image properties, adjust the rectangles returned by the imx219 driver. The top/left crop coordinates of the TGT_CROP rectangle were set to (0, 0) instead of (8, 8) which is the offset from the larger physical pixel array rectangle. This was also a mismatch with the default values crop rectangle value, so this is corrected. Found with v4l2-compliance. While at it, add V4L2_SEL_TGT_CROP_BOUNDS support: CROP_DEFAULT and CROP_BOUNDS have the same size as the non-active pixels are not readable using the selection API. Found with v4l2-compliance. [reword commit message, use macros for pixel offsets] Fixes: e6d4ef7d ("media: i2c: imx219: Implement get_selection") Signed-off-by:
Jacopo Mondi <jacopo@jmondi.org> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Rob Herring authored
Now that we have a graph schema, rework the media related schemas to use it. Mostly this is adding a reference to graph.yaml and dropping duplicate parts from schemas. Cc: Maxime Ripard <mripard@kernel.org> Cc: Jacopo Mondi <jacopo@jmondi.org> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Jacopo Mondi authored
The MAX9271 GPIO1 line that controls the sensor reset is by default enabled after a serializer chip reset. As rdacm20 does not go through an explicit serializer reset, make sure GPIO1 is enabled to make the camera module driver more robust. Fixes: 34009bff ("media: i2c: Add RDACM20 driver") Signed-off-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
Jacopo Mondi authored
Fix GPIO enable/disable operations which wrongly read the 0x0f register to obtain the current mask of the enabled lines instead of using the correct 0x0e register. Also fix access to bit 0 of the register which is marked as reserved. Fixes: 34009bff ("media: i2c: Add RDACM20 driver") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
-
Niklas Söderlund authored
There are no users left of this helper and as it implements an undesirable and too simple behaviour that should instead be implemented directly by drivers remove it to prevent future uses of it. Suggested-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
-
Niklas Söderlund authored
Rework the CSI-2 firmware parsing code to not use the soon to be removed v4l2_async_notifier_parse_fwnode_endpoints_by_port() helper. The change only aims to prepare for the removing of the old helper and there are no functional change. Signed-off-by:
-
Niklas Söderlund authored
In preparation of removing the usage of the old helper v4l2_async_notifier_parse_fwnode_endpoints_by_port() use the v4l2_async_subdev instead of fwnode_handle to match subdevices. Signed-off-by:
-
Niklas Söderlund authored
Rework the parallel firmware parsing code to not use the soon to be removed v4l2_async_notifier_parse_fwnode_endpoints_by_port() helper. The change only aims to prepare for the removing of the old helper and there are no functional change. Signed-off-by:
-
Niklas Söderlund authored
In preparation of removing the usage of the old helper v4l2_async_notifier_parse_fwnode_endpoints_by_port() do not dynamically allocate the whole structure containing the parameters for the parallel interface, instead only allocate the v4l2_async_subdev structure. There is no functional change. Signed-off-by:
-
Colin Ian King authored
Currently pointer nvm is being dereferenced before it is being null checked. Fix this by moving the assignments of pointers client and ov2740 so that are after the null check hence avoiding any potential null pointer dereferences on pointer nvm. Fixes: 5e6fd339 ("media: ov2740: allow OTP data access during streaming") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Dongchun Zhu authored
Add a V4L2 sub-device driver for OmniVision OV02A10 image sensor. Signed-off-by:
Dongchun Zhu <dongchun.zhu@mediatek.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Dongchun Zhu authored
Add device-tree binding documentation for OV02A10 image sensor driver, and the relevant MAINTAINERS entries. Signed-off-by:
-
Bingbu Cao authored
The lock in ov9734 is used to protect the streaming state and serialize the stream on and off callbacks, it should be hold before checking the streaming state in ov9734_set_stream(). Reported-by:
Tomasz Figa <tfiga@chromium.org> Reported-by:
Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by:
Bingbu Cao <bingbu.cao@intel.com> Reviewed-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by:
-
Sakari Ailus authored
The subdev's video device node was only assigned after registering the device node in the system. While it is unlikely that a driver needed to use this field in handling system calls to its file handle, there remains a slim chance the devnode field remains NULL while the driver expects to find a video node there. Assign the devnode field before registering the device, and assign it back to NULL if the registration failed. Signed-off-by:
-
Thomas Gleixner authored
in_interrupt() covers hard and soft interrupt servicing and bottom half disabled contexts, which is semantically undefined and useless. The comment for __ccdc_lsc_configure() "Context: in_interrupt()" is therefore as useful as "Context: unknown'. Remove it. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by:
-
Sakari Ailus authored
The DT bindings documented "reset-gpios" property but the driver never made use of it. Instead it used a GPIO called "xshutdown", with apprently wrong polarity. Fix this by requesting "reset" GPIO with the right polarity first, and if that fails, then request "xshutdown" GPIO with the old polarity. This way it works for new users as expected while if someone, somewhere, depended on "xshutdown" GPIO, that continues to work as well. Signed-off-by:
-
Sakari Ailus authored
The bus-type property is required for C-PHY support. Add it, including values for CCP2 and CSI-2 D-PHY. Also require the bus-type property. Effectively all new sensors are MIPI D-PHY or C-PHY that cannot be told apart without the bus-type property. Signed-off-by:
-
Sakari Ailus authored
Amend the existing SMIA bindings by adding MIPI CCS support, with separate compatible strings for CCS 1.0 and CCS 1.1. Rename the old bindings accordingly as CCS is the current standard. Signed-off-by:
-
Sakari Ailus authored
Generally reset signal is active low on camera sensors. The example had it high. Make it low, and use GPIO_ACTIVE_LOW in gpio.h for that. Signed-off-by:
-
Sakari Ailus authored
Convert nokia,smia DT bindings to YAML. Also add explicit license to bindings. Signed-off-by:
-
Sakari Ailus authored
nokia,nvm-size property was removed from the bindings but it was left in the example. Remove it from the example, too. Signed-off-by:
-
Sakari Ailus authored
vana-supply is optional in the spec, therefore make it optional in bindings, too. Signed-off-by:
-
Sakari Ailus authored
The link-frequencies property belongs to the endpoint, not to the node representing the device. Signed-off-by:
-
Sakari Ailus authored
This removes a warning at driver probe time telling that one or two entities have no function set. The function used for both the binner and scaler is the scaler. Signed-off-by:
-
Sakari Ailus authored
The driver doesn't do anything tangible with profiles. Remove the notion, and use the capabilities directly. Signed-off-by:
-
Sakari Ailus authored
Rename the "smiapp" driver as "ccs". MIPI CCS is the contemporary standard for raw Bayer camera sensors. The driver retains support for the SMIA++ and SMIA compliant camera sensors. A module alias is added for old user space using "smiapp" module name. Add Intel copyright while at it. Signed-off-by:
-
Sakari Ailus authored
Call CCS compliant sensors as "ccs" instead of "smiapp" in absence of a device specific name. This is done based on the value of the manufacturer ID register that is only present in CCS. Signed-off-by:
-
Sakari Ailus authored
Rename internal names to reflect the driver's new reference. The module name remains the same. Also fix trivial coding style issues on the way related to e.g. alignment changes due to the rename. Signed-off-by:
-
Sakari Ailus authored
Rename register access functions by changing smiapp to ccs. The functions operating on register addresses have "addr" appended to the name. Signed-off-by:
-
Sakari Ailus authored
This function is no longer needed as the smiapp_write() function can be used to write 8-bit registers with plain register addresses. Signed-off-by:
-
Sakari Ailus authored
Switch to CCS standard registers where they exist. The still relevant SMIA registers are left as-is and the redundant ones are removed. Signed-off-by:
-
Sakari Ailus authored
Use CCS limits for obtaining binning capabilities and subtypes. Signed-off-by:
-
Sakari Ailus authored
The CCS limits have the information so use it instead. Signed-off-by:
-
Sakari Ailus authored
Obtain the frame descriptor from the CCS limits, instead of reading them directly from the frame descriptor registers. Signed-off-by:
-
Sakari Ailus authored
Use the CCS limit definitions instead of the SMIA ones. This allows accessing CCS capabilities where needed as well as dropping the old SMIA limits. Signed-off-by:
-
Sakari Ailus authored
Read limit and capability values into a driver allocated buffer. This will later replace (most of) the existing SMIA limits. Signed-off-by:
-
