- 12 May, 2012 5 commits
-
-
Linus Walleij authored
The 802_* network OIDs were duplicated, so let's merge them and use the RNDIS_* prefixed definitions from the hyperV driver. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Linus Walleij authored
The RNDIS protocol contains a vast number of Object ID:s (OIDs). The current definitions had multiple definitions of these ID:s, let's use the nicely RNDIS_*-prefixed defines from the HyperV implementation, rename everywhere they're used, and copy+rename the few that were missing from this list of objects. Signed-off-by:
-
Linus Walleij authored
The RNDIS status codes are redefined with much stranged ifdeffery and only one of these codes was used in the hyperv driver, and there it is very clearly referring to the RNDIS variant, not some other status. So clarify this by explictly using the RNDIS_* prefixed status code in the hyperv drivera and delete the duplicate defines. Reviewed-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Linus Walleij authored
As a first step to consolidate the RNDIS implementations, break out a common file with all the #defines and move it to <linux/rndis.h>. This also deletes the immediate duplicated defines in the <linux/rndis.h> file that yields a lot of compilation warnings. Reviewed-by:
-
Linus Walleij authored
The header file <linux/usb/rndis_host.h> used a number of #defines that included the cpu_to_le32() macro to assure the result will be in LE endianness. Inlining this into the code instead of using it in the code definitions yields consolidation opportunities later on as you will see in the following patches. The individual drivers also used local defines - all are switched over to the pattern of doing the conversion at the call sites instead. Signed-off-by:
Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by:
-
- 11 May, 2012 31 commits
-
-
Eldad Zack authored
af_inet6.c:80: ERROR: do not initialise statics to 0 or NULL af_inet6.c:259: ERROR: spaces required around that '=' (ctx:VxV) af_inet6.c:394: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable af_inet6.c:412: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable af_inet6.c:422: ERROR: do not use assignment in if condition af_inet6.c:425: ERROR: do not use assignment in if condition af_inet6.c:433: ERROR: do not use assignment in if condition af_inet6.c:437: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable af_inet6.c:446: ERROR: spaces required around that '=' (ctx:VxV) af_inet6.c:478: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable af_inet6.c:485: ERROR: that open brace { should be on the previous line af_inet6.c:485: ERROR: space required before the open parenthesis '(' af_inet6.c:513: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable af_inet6.c:629: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable af_inet6.c:647: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable af_inet6.c:687: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable af_inet6.c:709: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable af_inet6.c:1073: ERROR: space required before the open parenthesis '(' Signed-off-by:Eldad Zack <eldad@fogrefinery.com> Signed-off-by:
-
Bjørn Mork authored
CONFIG_OF_MDIO is tristate and will be m if PHYLIB is m. Use IS_ENABLED macro to prevent build error: ERROR: "of_mdio_find_bus" [drivers/net/phy/mdio-mux.ko] undefined! Reported-by:
Randy Dunlap <rdunlap@xenotime.net> Cc: David Daney <david.daney@cavium.com> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Acked-by:
David Daney <david.daney@cavium.com> Signed-off-by:
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Included changes: * fix a little bug in the DHCP packet snooping introduced so far * minor fixes and cleanups * minor routing protocol API cleanups * add a new contributor name to translation-table.{c,h} * update copyright years in file headers * minor improvement for the routing algorithm -
Antonio Quartulli authored
translation_table.{c,h} have been heavily modified by another contributor and for legal purposes it is better to include his name into the contributor list Signed-off-by:Antonio Quartulli <ordex@autistici.org>
-
Antonio Quartulli authored
update copyright years in order to include 2012 Signed-off-by: -
Marek Lindner authored
Regression introduced by: f76d019194e0a88c57371df169ecc979690a04c2 Signed-off-by:
Marek Lindner <lindner_marek@yahoo.de> Signed-off-by:
-
Marek Lindner authored
batman-adv would forward OGMs from non-besthops while replacing the the TQ and TTL values with the values from the best hop. In certain corner cases this leads to a temporary routing loop. This patch changes this behavior: Only packets from best next hops are forwarded - TQ and TTL values won't be replaced anymore. However, the protocol needs to rebroadcast OGMs from single hop neighbors regardless of whether or not they are the best hop. To handle this case a new flag is introduced to alert neighboring nodes about the forwarded OGM that is not from my best next hop. It is to be discarded by all nodes except for the one originating the OGM. Signed-off-by:
Daniele Furlan <daniele.furlan@gmail.com> Tested-by:
Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
-
Linus Luessing authored
This allows us to easily add a sysfs parameter for an unsigned int later, which is not for a batman mesh interface (e.g. bat0), but for a common interface instead. It allows reading and writing an atomic_t in hard_iface (instead of bat_priv compared to the mesh variant). Developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by:
Linus Luessing <linus.luessing@web.de> Signed-off-by:
-
Marek Lindner authored
Signed-off-by:
-
Marek Lindner authored
Signed-off-by:
-
Marek Lindner authored
Reported-by:
-
Marek Lindner authored
Signed-off-by:
-
Marek Lindner authored
Signed-off-by:
-
Marek Lindner authored
Signed-off-by:
-
Marek Lindner authored
The B.A.T.M.A.N. IV OGM receive function still was hard-coded although it is a routing protocol specific function. This patch takes advantage of the dynamic packet handler registration to remove the hard-coded function calls. Signed-off-by:
-
Marek Lindner authored
The packet handler array replaces the growing switch statement, thus dealing with incoming packets in a more efficient way. It also adds to possibility to register packet handlers on the fly. Signed-off-by:
-
Marek Lindner authored
Signed-off-by:
-
Antonio Quartulli authored
In is_type_dhcprequest(), while parsing a DHCP message, if the entry we found in the option list is neither a padding nor the dhcp-type, we have to ignore it and jump as many bytes as its length + 1. The "+ 1" byte is given by the subtype field itself that has to be jumped too. Reported-by:
-
alex.bluesman.smirnov@gmail.com authored
According to the RFC4944 (Transmission of IPv6 Packets over IEEE 802.15.4 Networks), chapter 7: The IPv6 link-local address [RFC4291] for an IEEE 802.15.4 interface is formed by appending the Interface Identifier, as defined above, to the prefix FE80::/64. 10 bits 54 bits 64 bits +----------+-----------------------+----------------------------+ |1111111010| (zeros) | Interface Identifier | +----------+-----------------------+----------------------------+ This patch adds IPv6 address generation support for the 6lowpan interfaces. Signed-off-by:
Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by:
-
Eric Dumazet authored
An implementation of CoDel AQM, from Kathleen Nichols and Van Jacobson. http://queue.acm.org/detail.cfm?id=2209336 This AQM main input is no longer queue size in bytes or packets, but the delay packets stay in (FIFO) queue. As we don't have infinite memory, we still can drop packets in enqueue() in case of massive load, but mean of CoDel is to drop packets in dequeue(), using a control law based on two simple parameters : target : target sojourn time (default 5ms) interval : width of moving time window (default 100ms) Based on initial work from Dave Taht. Refactored to help future codel inclusion as a plugin for other linux qdisc (FQ_CODEL, ...), like RED. include/net/codel.h contains codel algorithm as close as possible than Kathleen reference. net/sched/sch_codel.c contains the linux qdisc specific glue. Separate structures permit a memory efficient implementation of fq_codel (to be sent as a separate work) : Each flow has its own struct codel_vars. timestamps are taken at enqueue() time with 1024 ns precision, allowing a range of 2199 seconds in queue, and 100Gb links support. iproute2 uses usec as base unit. Selected packets are dropped, unless ECN is enabled and packets can get ECN mark instead. Tested from 2Mb to 10Gb speeds with no particular problems, on ixgbe and tg3 drivers (BQL enabled). Usage: tc qdisc ... codel [ limit PACKETS ] [ target TIME ] [ interval TIME ] [ ecn ] qdisc codel 10: parent 1:1 limit 2000p target 3.0ms interval 60.0ms ecn Sent 13347099587 bytes 8815805 pkt (dropped 0, overlimits 0 requeues 0) rate 202365Kbit 16708pps backlog 113550b 75p requeues 0 count 116 lastcount 98 ldelay 4.3ms dropping drop_next 816us maxpacket 1514 ecn_mark 84399 drop_overlimit 0 CoDel must be seen as a base module, and should be used keeping in mind there is still a FIFO queue. So a typical setup will probably need a hierarchy of several qdiscs and packet classifiers to be able to meet whatever constraints a user might have. One possible example would be to use fq_codel, which combines Fair Queueing and CoDel, in replacement of sfq / sfq_red. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Dave Taht <dave.taht@bufferbloat.net> Cc: Kathleen Nichols <nichols@pollere.com> Cc: Van Jacobson <van@pollere.net> Cc: Tom Herbert <therbert@google.com> Cc: Matt Mathis <mattmathis@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
Eric Dumazet authored
Class bytes/packets stats can be misleading because they are updated in enqueue() while packet might be dropped later. We already fixed all qdiscs but sch_atm. This patch makes the final cleanup. class rate estimators can now match qdisc ones. Signed-off-by:
-
Joe Perches authored
Use the new bool function ether_addr_equal_64bits to add some clarity and reduce the likelihood for misuse of compare_ether_addr_64bits for sorting. Done via cocci script: $ cat compare_ether_addr_64bits.cocci @@ expression a,b; @@ - !compare_ether_addr_64bits(a, b) + ether_addr_equal_64bits(a, b) @@ expression a,b; @@ - compare_ether_addr_64bits(a, b) + !ether_addr_equal_64bits(a, b) @@ expression a,b; @@ - !ether_addr_equal_64bits(a, b) == 0 + ether_addr_equal_64bits(a, b) @@ expression a,b; @@ - !ether_addr_equal_64bits(a, b) != 0 + !ether_addr_equal_64bits(a, b) @@ expression a,b; @@ - ether_addr_equal_64bits(a, b) == 0 + !ether_addr_equal_64bits(a, b) @@ expression a,b; @@ - ether_addr_equal_64bits(a, b) != 0 + ether_addr_equal_64bits(a, b) @@ expression a,b; @@ - !!ether_addr_equal_64bits(a, b) + ether_addr_equal_64bits(a, b) Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
Add an optimized boolean function to check if 2 ethernet addresses are the same. This is to avoid any confusion about compare_ether_addr_64bits returning an unsigned, and not being able to use the compare_ether_addr_64bits function for sorting ala memcmp. Signed-off-by:
-
Joe Perches authored
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by:
-
Sathya Perla authored
Calling pci_disable_sriov() while VFs are assigned to VMs causes kernel panic. This patch uses PCI_DEV_FLAGS_ASSIGNED bit state of the VF's pci_dev to avoid this. Also, the unconditional function reset cmd issued on a PF probe can delete the VF configuration for the previously enabled VFs. A scratchpad register is now used to issue a function reset only when needed (i.e., in a crash dump scenario.) Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
-
James Chapman authored
If enabled, L2TP data packets have sequence numbers which a receiver can use to drop out of sequence frames or try to reorder them. The first frame has sequence number 0, but the L2TP code currently expects it to be 1. This results in the first data frame being handled as out of sequence. This one-line patch fixes the problem. Signed-off-by:
James Chapman <jchapman@katalix.com> Signed-off-by:
-
James Chapman authored
When L2TP data packet reordering is enabled, packets are held in a queue while waiting for out-of-sequence packets. If a packet gets lost, packets will be held until the reorder timeout expires, when we are supposed to then advance to the sequence number of the next packet but we don't currently do so. As a result, the data channel is stuck because we are waiting for a packet that will never arrive - all packets age out and none are passed. The fix is to add a flag to the session context, which is set when the reorder timeout expires and tells the receive code to reset the next expected sequence number to that of the next packet in the queue. Tested in a production L2TP network with Starent and Nortel L2TP gear. Signed-off-by:
-
Pavel Emelyanov authored
As proposed by Eric, make the tcp_input.o thinner. add/remove: 1/1 grow/shrink: 1/4 up/down: 868/-1329 (-461) function old new delta tcp_try_rmem_schedule - 864 +864 tcp_ack 4811 4815 +4 tcp_validate_incoming 817 815 -2 tcp_collapse 860 858 -2 tcp_send_rcvq 555 353 -202 tcp_data_queue 3435 3033 -402 tcp_prune_queue 721 - -721 Signed-off-by:
Pavel Emelyanov <xemul@parallels.com> Acked-by:
-
Pavel Emelyanov authored
As noted by Eric, no checks are performed on the data size we're putting in the read queue during repair. Thus, validate the given data size with the common rmem management routine. Signed-off-by:
-
Pavel Emelyanov authored
It actually works on the input queue and will use its read mem routines, thus it's better to have in in the tcp_input.c file. Signed-off-by:
-
-
- 10 May, 2012 4 commits
-
-
Don Skidmore authored
Update version number to better match the version of the out of tree driver with similar functionality. Signed-off-by:
Don Skidmore <donald.c.skidmore@intel.com> Tested-by:
Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Don Skidmore authored
When the hwmon code was initially added it was with the assumption that a sysfs patch would be also coming soon. Since that isn't the case some clean up needs to be done. This patch does that. Signed-off-by:
Stephen Ko <stephen.s.ko@intel.com> Signed-off-by:
-
Jacob Keller authored
Kernel software timestamping requires that the driver calls skb_tx_timestamp just before passing the skb to the MAC, in order to provide the best software timestamps. This patch adds this call for that support. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
-
Jacob Keller authored
This patch adds support for the ethtool get_ts_info operation, which enables access of available timestamp/timesync support for that device. It can query which ptp clock device is associated with the particular port. Signed-off-by:
-
