- 05 Jan, 2011 40 commits
-
-
Martin Schwidefsky authored
Signed-off-by:Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Martin Schwidefsky authored
Overhaul program event recording and the code dealing with the ptrace user space interface. Signed-off-by: -
Heiko Carstens authored
Call init_idle() which (re-)initializes the idle task structure before it gets used on a new cpu. That way we can also get rid of the odd preempt_enable_no_resched() call we have in the cpu offline path within cpu_idle(). That call prevented preempt count imbalances between cpu hotplug operations. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
Delay idle task creation until a cpu gets set online instead of creating them for all possible cpus at system startup. For one cpu system this should safe more than 1 MB. On my debug system with lots of debug stuff enabled this saves 2 MB. Same as on x86. Signed-off-by:
-
Stefan Haberland authored
In case the DASD driver needs to term a running I/O the retry counter is decreased twice. Remove the unnecessary retry counter decrease in das_term_IO. Signed-off-by:
Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by:
-
Stefan Haberland authored
Normal I/O operations through the DASD device driver give only access to the data fields of an ECKD device even for track based I/O. This patch extends the DASD device driver to give access to whole ECKD tracks including count, key and data fields. Signed-off-by:
-
Stefan Haberland authored
The freeze callback may set a stop bit so that a worker thread could not start I/O. The discipline specific freeze function waits for the worker to be completed. Set the stop_bit after the discipline specific freeze function has returned and no worker is running. Signed-off-by:
-
Stefan Weinhuber authored
If a DASD device has been reserved by a Linux system, and later this reservation is ‘stolen’ by a second system by means of an unconditional reserve, then the first system receives a notification about this fact. With this patch such an event can be either ignored, as before, or it can be used to let the device fail all I/O request, so that the device will not block anymore. Signed-off-by:
Stefan Weinhuber <wein@de.ibm.com> Signed-off-by:
-
Stefan Weinhuber authored
When a new path is added at runtime, the CIO layer will call the drivers path_event callback. The DASD device driver uses this callback to trigger a path verification for the new path. The driver will use only those paths for I/O, which have been successfully verified. Signed-off-by:
-
Stefan Weinhuber authored
Some storage systems support multitrack High Performance FICON requests, which read or write data to more than one track. This patch enables the DASD device driver to generate multitrack High Performance FICON requests. Signed-off-by:
-
Stefan Weinhuber authored
Any list of indirect data adresses (TIDAL) used by a TCW must not cross a page boundary. The original itcw implementation complies with this restriction by allocating allmost twice as much memory as actually needed, so that in any case there is enough room for the full TIDAL, either above or below the page boundary. This patch implements an alternative method, by using a TTIC TIDAW to connect TIDAL parts below and above a page boundary. Signed-off-by:
-
Heiko Carstens authored
Until now machine checks for the swapper process of the IPL cpu are just implicitly (and more or less accidently) enabled when the first time the idle process goes into idle state and loads an enabled wait psw. Before that machine checks are disabled. So let's enable them explicitly in trap_init() so we have a well defined time when machine checks are enabled. Signed-off-by:
-
Jan Glauber authored
The used buffers counter is not incremented in case of an error so the counter can become negative. Increment the used buffers counter before checking for errors. Signed-off-by:
Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by:
-
Sebastian Ott authored
Update the subchannel descriptor if we receive a "Installed parameters modified" crw. Signed-off-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by:
-
Martin Schwidefsky authored
Make the code in the 31 bit entry.S code as similar as possible to the 64 bit version in entry64.S. That makes it easier to add new code to the first level interrupt handler that affects both 31 and 64 bit kernels. Signed-off-by: -
Sebastian Ott authored
Add support to accumulate the number of 64K-bytes blocks all paths to a device at least support for a transport command. Signed-off-by:
-
Heiko Carstens authored
arch_needs_cpu() gets always executed on the current cpu. Therefore the cpu parameter can be ignored it is possible to use __get_cpu_var() instead of per_cpu() to access the per_cpu variable, which will generate better code. Signed-off-by:
-
Jan Glauber authored
Simplify the SIGA sync code and add unlikely annotations. In polling mode SBALs may be accessed without interrupt, so call SIGA sync before every scan. Signed-off-by:
-
Jan Glauber authored
HiperSocket devices only use one SBAL per qdio call without the enhanced SIGA feature. Since that feature is currently not used remove it from the qdio code so the compiler can generate better code for the HiperSocket outbound path. While at it mark the SIGA error conditions as unlikely. Signed-off-by:
-
Jan Glauber authored
If QIOASSIST is enabled for a qdio device the SIGA instruction requires a modified function code. This function code modifier was missing for SIGA-R and SIGA-S which can lead to a kernel panic caused by an operand exception. Cc: stable@kernel.org Signed-off-by:
-
Jan Glauber authored
Add a counter for outbound queue full events to the qdio statistics. Signed-off-by:
-
Jan Glauber authored
Introduce a scan treshold for the qdio outbound queues. By setting the threshold the driver can tell qdio after how much used SBALs qdio should schedule the outbound tasklet that scans the queue for finished SBALs. The threshold is specific by the drivers because a Hipersockets device is much faster in utilizing outbound buffers than a ZFCP or OSA device. The default values after how many used SBALs the tasklet should run are: OSA: > 31 SBALs Hipersockets: > 7 SBALs zfcp: > 55 SBALs Signed-off-by:
-
Jan Glauber authored
If the shared indicator is used the following race leads to an inbound stall: Device CPU0 CPU1 ======================================================== non-shared DSCI =>1 ALSI => 1 Thin INT ALSI => 0 non-shared DSCI tasklets scheduled shared DSCI => 1 ALSI => 1 shared DSCI => 0 ALSI ? -> set Thin INT ALSI => 0 ALSI was set, shared DSCI => 1 After that no more interrupts occur because the DSCI is still set. Fix that race by only resetting the shared DSCI if it was actually set so the tasklets for all shared devices are scheduled and will run after the interrupt. Signed-off-by: -
Felix Beck authored
Also process 4096 bit RSA keys in CRT format. Handle them like the smaller keys and take care of the zero padding. Signed-off-by:
Felix Beck <felix.beck@de.ibm.com> Signed-off-by:
-
Felix Beck authored
The cca on the crypto adapter has a restriction in the size of the exponent if a key with a modulus bigger than 2048 bit is used. Thus in that case we have to avoid that the crypto device driver thinks the adapter is defect and sets it offline. Therfore a new member for the zcrypt_device struct called max_exp_bit_length is introduced. This will be set the first time the cca returns the error code function not implemented. If this is done with an adapter twice it will return -EINVAL. Signed-off-by:
-
Felix Beck authored
Definitions for CEX3 card types are changed to support 4096 bit RSA keys in the coprocessor. Signed-off-by:
Ralph Wuerthner <ralph.wuerthner@de.ibm.com> Signed-off-by:
-
Felix Beck authored
Definitions for CEX3 card types are changed to support 4096 bit RSA keys. Also new structs for the accelerator mode are needed. Additionaly when checking the length of key parts, the case for bigger (4096 bit) keys is needed. Signed-off-by:
-
Felix Beck authored
Implemented an asm in the ap bus and made it accessible for the card specific parts of the zcrypt driver. Thus when a cex3a is recognized a check can be performed to dermine whether the card supports 4096 bit RSA keys. Signed-off-by:
-
Michael Holzheu authored
Currently the buffer for diagnose data is allocated in the open function of the debugfs file and is released in the close function. This has the drawback that a user (root) can pin that memory by not closing the file. This patch moves the buffer allocation to the read function. The buffer is automatically released after the buffer is copied to userspace. Signed-off-by:
Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by:
-
Martin Schwidefsky authored
Use thread_info lowcore field for current_thread_info(), saves an unnecessary calculation. Signed-off-by: -
Heiko Carstens authored
Get rid of register/unregister_early_external_interrupt() and clean up the code while at it. Signed-off-by:
-
Heiko Carstens authored
Use register_external_interrupt() instead of register_early_external_interrupt(). The early variant is not necessary since kmalloc works already. Signed-off-by:
-
Heiko Carstens authored
Use an early init call to initialize pfault. That way it is possible to use the register_external_interrupt() instead of the early variant. No need to enable pfault any earlier since it has only effect if user space processes are running. Signed-off-by:
-
Holger Dengler authored
Add support for AP Bus I/O interrupt statistics in /proc/interrupts. Signed-off-by:
Holger Dengler <hd@linux.vnet.ibm.com> Signed-off-by:
-
Heiko Carstens authored
Add support for CTC I/O interrupt statistics in /proc/interrupts. Signed-off-by:
-
Heiko Carstens authored
Add support for CLAW I/O interrupt statistics in /proc/interrupts. Signed-off-by:
-
Heiko Carstens authored
Add support for LCS I/O interrupt statistics in /proc/interrupts. Signed-off-by:
-
Heiko Carstens authored
Add support for VMUR I/O interrupt statistics in /proc/interrupts. Signed-off-by:
-
Heiko Carstens authored
Add support for ccw based tape I/O interrupt statistics in /proc/interrupts. Signed-off-by:
-
Heiko Carstens authored
Add support for 3270 I/O interrupt statistics in /proc/interrupts. Signed-off-by:
-
