- 25 Jul, 2019 4 commits
-
-
Leonard Crestez authored
Some hardware PMU drivers will override perf_event.cpu inside their event_init callback. This causes a lockdep splat when initialized through the kernel API: WARNING: CPU: 0 PID: 250 at kernel/events/core.c:2917 ctx_sched_out+0x78/0x208 pc : ctx_sched_out+0x78/0x208 Call trace: ctx_sched_out+0x78/0x208 __perf_install_in_context+0x160/0x248 remote_function+0x58/0x68 generic_exec_single+0x100/0x180 smp_call_function_single+0x174/0x1b8 perf_install_in_context+0x178/0x188 perf_event_create_kernel_counter+0x118/0x160 Fix this by calling perf_install_in_context with event->cpu, just like perf_event_open Signed-off-by:
Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Mark Rutland <mark.rutland@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Frank Li <Frank.li@nxp.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Link: https://lkml.kernel.org/r/c4ebe0503623066896d7046def4d6b1e06e0eb2e.1563972056.git.leonard.crestez@nxp.comSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
Zhenzhong Duan authored
check_msr is used to fix a bug report in guest where KVM doesn't support LBR MSR and cause #GP. The msr check is bypassed on real HW to workaround a false failure, see commit d0e1a507 ("perf/x86/intel: Disable check_msr for real HW") When running a guest with CONFIG_HYPERVISOR_GUEST not set or "nopv" enabled, current check isn't enough and #GP could trigger. Signed-off-by:
Zhenzhong Duan <zhenzhong.duan@oracle.com> Signed-off-by:
-
Yunying Sun authored
The Intel SDM states that bit 13 of Icelake's MSR_OFFCORE_RSP_x register is valid, and used for counting hardware generated prefetches of L3 cache. Update the bitmask to allow bit 13. Before: $ perf stat -e cpu/event=0xb7,umask=0x1,config1=0x1bfff/u sleep 3 Performance counter stats for 'sleep 3': <not supported> cpu/event=0xb7,umask=0x1,config1=0x1bfff/u After: $ perf stat -e cpu/event=0xb7,umask=0x1,config1=0x1bfff/u sleep 3 Performance counter stats for 'sleep 3': 9,293 cpu/event=0xb7,umask=0x1,config1=0x1bfff/u Signed-off-by:Yunying Sun <yunying.sun@intel.com> Signed-off-by:
Kan Liang <kan.liang@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@kernel.org Cc: alexander.shishkin@linux.intel.com Cc: bp@alien8.de Cc: hpa@zytor.com Cc: jolsa@redhat.com Cc: namhyung@kernel.org Link: https://lkml.kernel.org/r/20190724082932.12833-1-yunying.sun@intel.comSigned-off-by:
-
Kan Liang authored
Sampling SLOTS event and ref-cycles event in a group on Icelake gives EINVAL. SLOTS event is the event stands for the fixed counter 3, not fixed counter 2. Wrong mask was set to SLOTS event in intel_icl_pebs_event_constraints[]. Reported-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
- 23 Jul, 2019 11 commits
-
-
Ingo Molnar authored
Merge tag 'perf-urgent-for-mingo-5.3-20190723' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: perf.data: Alexey Budankov: - Fix loading of compressed data split across adjacent records Jiri Olsa: - Fix buffer size setting for processing CPU topology perf.data header. perf stat: Jiri Olsa: - Fix segfault for event group in repeat mode Cong Wang: - Always separate "stalled cycles per insn" line, it was being appended to the "instructions" line. perf script: Andi Kleen: - Fix --max-blocks man page description. - Improve man page description of metrics. - Fix off by one in brstackinsn IPC computation. perf probe: Arnaldo Carvalho de Melo: - Avoid calling freeing routine multiple times for same pointer. perf build: - Do not use -Wshadow on gcc < 4.8, avoiding too strict warnings treated as errors, breaking the build. Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
As it is too strict, see https://lkml.org/lkml/2006/11/28/253 and https://gcc.gnu.org/gcc-4.8/changes.html, that takes into account Linus's comments (search for Wshadow) for the reasoning about -Wshadow not being interesting before gcc 4.8. Acked-by:
Andrii Nakryiko <andrii.nakryiko@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/r/20190719183417.GQ3624@kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
When perf_add_probe_events() we call cleanup_perf_probe_events() for the pev pointer it receives, then, as part of handling this failure the main 'perf probe' goes on and calls cleanup_params() and that will again call cleanup_perf_probe_events()for the same pointer, so just set nevents to zero when handling the failure of perf_add_probe_events() to avoid the double free. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-x8qgma4g813z96dvtw9w219q@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
So that, when perf_add_probe_events() fails, like in: # perf probe icmp_rcv:64 "type=icmph->type" Failed to find 'icmph' in this function. Error: Failed to add events. Segmentation fault (core dumped) # We don't segfault. clear_perf_probe_event() was zeroing the whole pev, and since the switch to zfree() for the members in the pev, that memset() was removed, which left nargs with its original value, in the above case 1. With the memset the same pev could be passed to clear_perf_probe_event() multiple times, since all it would have would be zeroes, and free() accepts zero, the loop would not happen and we would just memset it again to zeroes. Without it we got that segfault, so zero nargs to keep it like it was, next cset will avoid calling clear_perf_probe_event() for the same pevs in case of failure. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: d8f9da24 ("perf tools: Use zfree() where applicable") Link: https://lkml.kernel.org/n/tip-802f2jypnwqsvyavvivs8464@git.kernel.orgSigned-off-by: -
Alexey Budankov authored
Fix decompression failure found during the loading of compressed trace collected on larger scale systems (>48 cores). The error happened due to lack of decompression space for a mmaped buffer data chunk split across adjacent PERF_RECORD_COMPRESSED records. $ perf report -i bt.16384.data --stats failed to decompress (B): 63869 -> 0 : Destination buffer is too small user stack dump failure Can't parse sample, err = -14 0x2637e436 [0x4080]: failed to process type: 9 Error: failed to process sample $ perf test 71 71: Zstd perf.data compression/decompression : Ok Signed-off-by:
Alexey Budankov <alexey.budankov@linux.intel.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/4d839e1b-9c48-89c4-9702-a12217420611@linux.intel.comSigned-off-by:
-
Cong Wang authored
The "stalled cycles per insn" is appended to "instructions" when the CPU has this hardware counter directly. We should always make it a separate line, which also aligns to the output when we hit the "if (total && avg)" branch. Before: $ sudo perf stat --all-cpus --field-separator , --log-fd 1 -einstructions,cycles -- sleep 1 4565048704,,instructions,64114578096,100.00,1.34,insn per cycle,, 3396325133,,cycles,64146628546,100.00,, After: $ sudo ./tools/perf/perf stat --all-cpus --field-separator , --log-fd 1 -einstructions,cycles -- sleep 1 6721924,,instructions,24026790339,100.00,0.22,insn per cycle ,,,,,0.00,stalled cycles per insn 30939953,,cycles,24025512526,100.00,, Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
-
Jiri Olsa authored
Numfor Mbiziwo-Tiapo reported segfault on stat of event group in repeat mode: # perf stat -e '{cycles,instructions}' -r 10 ls It's caused by memory corruption due to not cleaned evsel's id array and index, which needs to be rebuilt in every stat iteration. Currently the ids index grows, while the array (which is also not freed) has the same size. Fixing this by releasing id array and zeroing ids index in perf_evsel__close function. We also need to keep the evsel_list alive for stat record (which is disabled in repeat mode). Reported-by:Numfor Mbiziwo-Tiapo <nums@google.com> Signed-off-by:
-
Jiri Olsa authored
After Song Liu's segfault fix for pipe mode, Arnaldo reported following error: # perf record -o - | perf script 0x514 [0x1ac]: failed to process type: 80 It's caused by wrong buffer size setup in feature processing, which makes cpu topology feature fail, because it's using buffer size to recognize its header version. Reported-by:
-
Andi Kleen authored
When we hit the end of a program block, need to count the last instruction too for the IPC computation. This caused large errors for small blocks. % perf script -b ls / > /dev/null Before: % perf script -F +brstackinsn --xed ... 00007f94c9ac70d8 jz 0x7f94c9ac70e3 # PRED 3 cycles [36] 4.33 IPC 00007f94c9ac70e3 testb $0x20, 0x31d(%rbx) 00007f94c9ac70ea jnz 0x7f94c9ac70b0 00007f94c9ac70ec testb $0x8, 0x205ad(%rip) 00007f94c9ac70f3 jz 0x7f94c9ac6ff0 # PRED 1 cycles [37] 3.00 IPC After: % perf script -F +brstackinsn --xed ... 00007f94c9ac70d8 jz 0x7f94c9ac70e3 # PRED 3 cycles [15] 4.67 IPC 00007f94c9ac70e3 testb $0x20, 0x31d(%rbx) 00007f94c9ac70ea jnz 0x7f94c9ac70b0 00007f94c9ac70ec testb $0x8, 0x205ad(%rip) 00007f94c9ac70f3 jz 0x7f94c9ac6ff0 # PRED 1 cycles [16] 4.00 IPC Suggested-by:Denis Bakhvalov <denis.bakhvalov@intel.com> Signed-off-by:
-
Andi Kleen authored
Clarify that a metric is based on events, not referring to itself. Also some improvements with the sentences. Signed-off-by:
-
Andi Kleen authored
The --max-blocks description was using the old name brstackasm. Use brstackinsn instead. Signed-off-by:
-
- 22 Jul, 2019 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull preemption Kconfig fix from Thomas Gleixner: "The PREEMPT_RT stub config renamed PREEMPT to PREEMPT_LL and defined PREEMPT outside of the menu and made it selectable by both PREEMPT_LL and PREEMPT_RT. Stupid me missed that 114 defconfigs select CONFIG_PREEMPT which obviously can't work anymore. oldconfig builds are affected as well, but it's more obvious as the user gets asked. [old]defconfig silently fixes it up and selects PREEMPT_NONE. Unbreak it by undoing the rename and adding a intermediate config symbol which is selected by both PREEMPT and PREEMPT_RT. That requires to chase down a few #ifdefs, but it's better than tweaking 114 defconfigs and annoying users" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/rt, Kconfig: Unbreak def/oldconfig with CONFIG_PREEMPT=y
-
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linuxLinus Torvalds authored
Pull pidfd polling fix from Christian Brauner: "A fix for pidfd polling. It ensures that the task's exit state is visible to all waiters" * tag 'for-linus-20190722' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: pidfd: fix a poll race when setting exit_state
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: - fixes for leaks caused by recently merged patches - one build fix - a fix to prevent mixing of incompatible features * tag 'for-5.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: don't leak extent_map in btrfs_get_io_geometry() btrfs: free checksum hash on in close_ctree btrfs: Fix build error while LIBCRC32C is module btrfs: inode: Don't compress if NODATASUM or NODATACOW set
-
Thomas Gleixner authored
The merge of the CONFIG_PREEMPT_RT stub renamed CONFIG_PREEMPT to CONFIG_PREEMPT_LL which causes all defconfigs which have CONFIG_PREEMPT=y set to fall back to CONFIG_PREEMPT_NONE because CONFIG_PREEMPT depends on the preemption mode choice wich defaults to NONE. This also affects oldconfig builds. So rather than changing 114 defconfig files and being an annoyance to users, revert the rename and select a new config symbol PREEMPTION. That keeps everything working smoothly and the revelant ifdef's are going to be fixed up step by step. Reported-by:
Thomas Gleixner <tglx@linutronix.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: "For two regressions in media core: - v4l2-subdev: fix regression in check_pad() - videodev2.h: change V4L2_PIX_FMT_BGRA444 define: fourcc was already in use" * tag 'media/v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: videodev2.h: change V4L2_PIX_FMT_BGRA444 define: fourcc was already in use media: v4l2-subdev: fix regression in check_pad() -
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Several netfilter fixes including a nfnetlink deadlock fix from Florian Westphal and fix for dropping VRF packets from Miaohe Lin. 2) Flow offload fixes from Pablo Neira Ayuso including a fix to restore proper block sharing. 3) Fix r8169 PHY init from Thomas Voegtle. 4) Fix memory leak in mac80211, from Lorenzo Bianconi. 5) Missing NULL check on object allocation in cxgb4, from Navid Emamdoost. 6) Fix scaling of RX power in sfp phy driver, from Andrew Lunn. 7) Check that there is actually an ip header to access in skb->data in VRF, from Peter Kosyh. 8) Remove spurious rcu unlock in hv_netvsc, from Haiyang Zhang. 9) One more tweak the the TCP fragmentation memory limit changes, to be less harmful to applications setting small SO_SNDBUF values. From Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (40 commits) tcp: be more careful in tcp_fragment() hv_netvsc: Fix extra rcu_read_unlock in netvsc_recv_callback() vrf: make sure skb->data contains ip header to make routing connector: remove redundant input callback from cn_dev qed: Prefer pcie_capability_read_word() igc: Prefer pcie_capability_read_word() cxgb4: Prefer pcie_capability_read_word() be2net: Synchronize be_update_queues with dev_watchdog bnx2x: Prevent load reordering in tx completion processing net: phy: sfp: hwmon: Fix scaling of RX power net: sched: verify that q!=NULL before setting q->flags chelsio: Fix a typo in a function name allocate_flower_entry: should check for null deref net: hns3: typo in the name of a constant kbuild: add net/netfilter/nf_tables_offload.h to header-test blacklist. tipc: Fix a typo mac80211: don't warn about CW params when not using them mac80211: fix possible memory leak in ieee80211_assign_beacon nl80211: fix NL80211_HE_MAX_CAPABILITY_LEN nl80211: fix VENDOR_CMD_RAW_DATA ... -
Suren Baghdasaryan authored
There is a race between reading task->exit_state in pidfd_poll and writing it after do_notify_parent calls do_notify_pidfd. Expected sequence of events is: CPU 0 CPU 1 ------------------------------------------------ exit_notify do_notify_parent do_notify_pidfd tsk->exit_state = EXIT_DEAD pidfd_poll if (tsk->exit_state) However nothing prevents the following sequence: CPU 0 CPU 1 ------------------------------------------------ exit_notify do_notify_parent do_notify_pidfd pidfd_poll if (tsk->exit_state) tsk->exit_state = EXIT_DEAD This causes a polling task to wait forever, since poll blocks because exit_state is 0 and the waiting task is not notified again. A stress test continuously doing pidfd poll and process exits uncovered this bug. To fix it, we make sure that the task's exit_state is always set before calling do_notify_pidfd. Fixes: b53b0b9d ("pidfd: add polling support") Cc: kernel-team@android.com Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by:Suren Baghdasaryan <surenb@google.com> Signed-off-by:
Joel Fernandes (Google) <joel@joelfernandes.org> Link: https://lore.kernel.org/r/20190717172100.261204-1-joel@joelfernandes.org [christian@brauner.io: adapt commit message and drop unneeded changes from wait_task_zombie] Signed-off-by:
Christian Brauner <christian@brauner.io>
-
Eric Dumazet authored
Some applications set tiny SO_SNDBUF values and expect TCP to just work. Recent patches to address CVE-2019-11478 broke them in case of losses, since retransmits might be prevented. We should allow these flows to make progress. This patch allows the first and last skb in retransmit queue to be split even if memory limits are hit. It also adds the some room due to the fact that tcp_sendmsg() and tcp_sendpage() might overshoot sk_wmem_queued by about one full TSO skb (64KB size). Note this allowance was already present in stable backports for kernels < 4.15 Note for < 4.15 backports : tcp_rtx_queue_tail() will probably look like : static inline struct sk_buff *tcp_rtx_queue_tail(const struct sock *sk) { struct sk_buff *skb = tcp_send_head(sk); return skb ? tcp_write_queue_prev(sk, skb) : tcp_write_queue_tail(sk); } Fixes: f070ef2a ("tcp: tcp_fragment() should apply sane memory limits") Signed-off-by:Eric Dumazet <edumazet@google.com> Reported-by:
Andrew Prout <aprout@ll.mit.edu> Tested-by:
Jonathan Lemon <jonathan.lemon@gmail.com> Tested-by:
Michal Kubecek <mkubecek@suse.cz> Acked-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Acked-by:
Christoph Paasch <cpaasch@apple.com> Cc: Jonathan Looney <jtl@netflix.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Haiyang Zhang authored
There is an extra rcu_read_unlock left in netvsc_recv_callback(), after a previous patch that removes RCU from this function. This patch removes the extra RCU unlock. Fixes: 345ac089 ("hv_netvsc: pass netvsc_device to receive callback") Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
- 21 Jul, 2019 16 commits
-
-
Linus Torvalds authored
-
Peter Kosyh authored
vrf_process_v4_outbound() and vrf_process_v6_outbound() do routing using ip/ipv6 addresses, but don't make sure the header is available in skb->data[] (skb_headlen() is less then header size). Case: 1) igb driver from intel. 2) Packet size is greater then 255. 3) MPLS forwards to VRF device. So, patch adds pskb_may_pull() calls in vrf_process_v4/v6_outbound() functions. Signed-off-by:
Peter Kosyh <p.kosyh@gmail.com> Reviewed-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
Vasily Averin authored
A small cleanup: this callback is never used. Originally fixed by Stanislav Kinsburskiy <skinsbursky@virtuozzo.com> for OpenVZ7 bug OVZ-6877 cc: stanislav.kinsburskiy@gmail.com Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Signed-off-by:
-
Frederick Lawler authored
Commit 8c0d3a02 ("PCI: Add accessors for PCI Express Capability") added accessors for the PCI Express Capability so that drivers didn't need to be aware of differences between v1 and v2 of the PCI Express Capability. Replace pci_read_config_word() and pci_write_config_word() calls with pcie_capability_read_word() and pcie_capability_write_word(). Signed-off-by:
Frederick Lawler <fred@fredlawl.com> Acked-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by:
-
Frederick Lawler authored
Commit 8c0d3a02 ("PCI: Add accessors for PCI Express Capability") added accessors for the PCI Express Capability so that drivers didn't need to be aware of differences between v1 and v2 of the PCI Express Capability. Replace pci_read_config_word() and pci_write_config_word() calls with pcie_capability_read_word() and pcie_capability_write_word(). Signed-off-by:
-
Frederick Lawler authored
Commit 8c0d3a02 ("PCI: Add accessors for PCI Express Capability") added accessors for the PCI Express Capability so that drivers didn't need to be aware of differences between v1 and v2 of the PCI Express Capability. Replace pci_read_config_word() and pci_write_config_word() calls with pcie_capability_read_word() and pcie_capability_write_word(). Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Benjamin Poirier authored
As pointed out by Firo Yang, a netdev tx timeout may trigger just before an ethtool set_channels operation is started. be_tx_timeout(), which dumps some queue structures, is not written to run concurrently with be_update_queues(), which frees/allocates those queues structures. Add some synchronization between the two. Message-id: <CH2PR18MB31898E033896F9760D36BFF288C90@CH2PR18MB3189.namprd18.prod.outlook.com> Signed-off-by:
Benjamin Poirier <bpoirier@suse.com> Signed-off-by:
-
Brian King authored
This patch fixes an issue seen on Power systems with bnx2x which results in the skb is NULL WARN_ON in bnx2x_free_tx_pkt firing due to the skb pointer getting loaded in bnx2x_free_tx_pkt prior to the hw_cons load in bnx2x_tx_int. Adding a read memory barrier resolves the issue. Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
Andrew Lunn authored
The RX power read from the SFP uses units of 0.1uW. This must be scaled to units of uW for HWMON. This requires a divide by 10, not the current 100. With this change in place, sensors(1) and ethtool -m agree: sff2-isa-0000 Adapter: ISA adapter in0: +3.23 V temp1: +33.1 C power1: 270.00 uW power2: 200.00 uW curr1: +0.01 A Laser output power : 0.2743 mW / -5.62 dBm Receiver signal average optical power : 0.2014 mW / -6.96 dBm Reported-by: chris.healy@zii.aero Signed-off-by:Andrew Lunn <andrew@lunn.ch> Fixes: 1323061a ("net: phy: sfp: Add HWMON support for module sensors") Signed-off-by:
-
Vlad Buslov authored
In function int tc_new_tfilter() q pointer can be NULL when adding filter on a shared block. With recent change that resets TCQ_F_CAN_BYPASS after filter creation, following NULL pointer dereference happens in case parent block is shared: [ 212.925060] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ 212.925445] #PF: supervisor write access in kernel mode [ 212.925709] #PF: error_code(0x0002) - not-present page [ 212.925965] PGD 8000000827923067 P4D 8000000827923067 PUD 827924067 PMD 0 [ 212.926302] Oops: 0002 [#1] SMP KASAN PTI [ 212.926539] CPU: 18 PID: 2617 Comm: tc Tainted: G B 5.2.0+ #512 [ 212.926938] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017 [ 212.927364] RIP: 0010:tc_new_tfilter+0x698/0xd40 [ 212.927633] Code: 74 0d 48 85 c0 74 08 48 89 ef e8 03 aa 62 00 48 8b 84 24 a0 00 00 00 48 8d 78 10 48 89 44 24 18 e8 4d 0c 6b ff 48 8b 44 24 18 <83> 60 10 f b 48 85 ed 0f 85 3d fe ff ff e9 4f fe ff ff e8 81 26 f8 [ 212.928607] RSP: 0018:ffff88884fd5f5d8 EFLAGS: 00010296 [ 212.928905] RAX: 0000000000000000 RBX: 0000000000000000 RCX: dffffc0000000000 [ 212.929201] RDX: 0000000000000007 RSI: 0000000000000004 RDI: 0000000000000297 [ 212.929402] RBP: ffff88886bedd600 R08: ffffffffb91d4b51 R09: fffffbfff7616e4d [ 212.929609] R10: fffffbfff7616e4c R11: ffffffffbb0b7263 R12: ffff88886bc61040 [ 212.929803] R13: ffff88884fd5f950 R14: ffffc900039c5000 R15: ffff88835e927680 [ 212.929999] FS: 00007fe7c50b6480(0000) GS:ffff88886f980000(0000) knlGS:0000000000000000 [ 212.930235] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 212.930394] CR2: 0000000000000010 CR3: 000000085bd04002 CR4: 00000000001606e0 [ 212.930588] Call Trace: [ 212.930682] ? tc_del_tfilter+0xa40/0xa40 [ 212.930811] ? __lock_acquire+0x5b5/0x2460 [ 212.930948] ? find_held_lock+0x85/0xa0 [ 212.931081] ? tc_del_tfilter+0xa40/0xa40 [ 212.931201] rtnetlink_rcv_msg+0x4ab/0x5f0 [ 212.931332] ? rtnl_dellink+0x490/0x490 [ 212.931454] ? lockdep_hardirqs_on+0x260/0x260 [ 212.931589] ? netlink_deliver_tap+0xab/0x5a0 [ 212.931717] ? match_held_lock+0x1b/0x240 [ 212.931844] netlink_rcv_skb+0xd0/0x200 [ 212.931958] ? rtnl_dellink+0x490/0x490 [ 212.932079] ? netlink_ack+0x440/0x440 [ 212.932205] ? netlink_deliver_tap+0x161/0x5a0 [ 212.932335] ? lock_downgrade+0x360/0x360 [ 212.932457] ? lock_acquire+0xe5/0x210 [ 212.932579] netlink_unicast+0x296/0x350 [ 212.932705] ? netlink_attachskb+0x390/0x390 [ 212.932834] ? _copy_from_iter_full+0xe0/0x3a0 [ 212.932976] netlink_sendmsg+0x394/0x600 [ 212.937998] ? netlink_unicast+0x350/0x350 [ 212.943033] ? move_addr_to_kernel.part.0+0x90/0x90 [ 212.948115] ? netlink_unicast+0x350/0x350 [ 212.953185] sock_sendmsg+0x96/0xa0 [ 212.958099] ___sys_sendmsg+0x482/0x520 [ 212.962881] ? match_held_lock+0x1b/0x240 [ 212.967618] ? copy_msghdr_from_user+0x250/0x250 [ 212.972337] ? lock_downgrade+0x360/0x360 [ 212.976973] ? rwlock_bug.part.0+0x60/0x60 [ 212.981548] ? __mod_node_page_state+0x1f/0xa0 [ 212.986060] ? match_held_lock+0x1b/0x240 [ 212.990567] ? find_held_lock+0x85/0xa0 [ 212.994989] ? do_user_addr_fault+0x349/0x5b0 [ 212.999387] ? lock_downgrade+0x360/0x360 [ 213.003713] ? find_held_lock+0x85/0xa0 [ 213.007972] ? __fget_light+0xa1/0xf0 [ 213.012143] ? sockfd_lookup_light+0x91/0xb0 [ 213.016165] __sys_sendmsg+0xba/0x130 [ 213.020040] ? __sys_sendmsg_sock+0xb0/0xb0 [ 213.023870] ? handle_mm_fault+0x337/0x470 [ 213.027592] ? page_fault+0x8/0x30 [ 213.031316] ? lockdep_hardirqs_off+0xbe/0x100 [ 213.034999] ? mark_held_locks+0x24/0x90 [ 213.038671] ? do_syscall_64+0x1e/0xe0 [ 213.042297] do_syscall_64+0x74/0xe0 [ 213.045828] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 213.049354] RIP: 0033:0x7fe7c527c7b8 [ 213.052792] Code: 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 8f 0c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f 0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 89 54 [ 213.060269] RSP: 002b:00007ffc3f7908a8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 213.064144] RAX: ffffffffffffffda RBX: 000000005d34716f RCX: 00007fe7c527c7b8 [ 213.068094] RDX: 0000000000000000 RSI: 00007ffc3f790910 RDI: 0000000000000003 [ 213.072109] RBP: 0000000000000000 R08: 0000000000000001 R09: 00007fe7c5340cc0 [ 213.076113] R10: 0000000000404ec2 R11: 0000000000000246 R12: 0000000000000080 [ 213.080146] R13: 0000000000480640 R14: 0000000000000080 R15: 0000000000000000 [ 213.084147] Modules linked in: act_gact cls_flower sch_ingress nfsv3 nfs_acl nfs lockd grace fscache bridge stp llc sunrpc intel_rapl_msr intel_rapl_common [<1;69;32Msb_edac rdma_ucm rdma_cm x86_pkg_temp_thermal iw_cm intel_powerclamp ib_cm coretemp kvm_intel kvm irqbypass mlx5_ib ib_uverbs ib_core crct10dif_pclmul crc32_pc lmul crc32c_intel ghash_clmulni_intel mlx5_core intel_cstate intel_uncore iTCO_wdt igb iTCO_vendor_support mlxfw mei_me ptp ses intel_rapl_perf mei pcspkr ipmi _ssif i2c_i801 joydev enclosure pps_core lpc_ich ioatdma wmi dca ipmi_si ipmi_devintf ipmi_msghandler acpi_power_meter acpi_pad ast i2c_algo_bit drm_vram_helpe r ttm drm_kms_helper drm mpt3sas raid_class scsi_transport_sas [ 213.112326] CR2: 0000000000000010 [ 213.117429] ---[ end trace adb58eb0a4ee6283 ]--- Verify that q pointer is not NULL before setting the 'flags' field. Fixes: 3f05e688 ("net_sched: unset TCQ_F_CAN_BYPASS when adding filters") Signed-off-by:
Vlad Buslov <vladbu@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Christophe JAILLET authored
It is likely that 'my3216_poll()' should be 'my3126_poll()'. (1 and 2 switched in 3126. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Navid Emamdoost authored
allocate_flower_entry does not check for allocation success, but tries to deref the result. I only moved the spin_lock under null check, because the caller is checking allocation's status at line 652. Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by:
-
Christophe JAILLET authored
All constant in 'enum HCLGE_MBX_OPCODE' start with HCLGE, except 'HLCGE_MBX_PUSH_VLAN_INFO' (C and L switched) s/HLC/HCL/ Signed-off-by:
-
Jeremy Sowden authored
net/netfilter/nf_tables_offload.h includes net/netfilter/nf_tables.h which is itself on the blacklist. Reported-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
Jeremy Sowden <jeremy@azazel.net> Acked-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Christophe JAILLET authored
s/tipc_toprsv_listener_data_ready/tipc_topsrv_listener_data_ready/ (r and s switched in topsrv) Signed-off-by:
-
David S. Miller authored
Merge tag 'mac80211-for-davem-2019-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== We have a handful of fixes: * ignore bad CW parameters if we aren't using them, instead of warning * fix operation (and then build) with the new netlink vendor command policy requirement * fix a memory leak in an error path when setting beacons ==================== Signed-off-by:
-
