doc.2016.06.15a: Documentation updates
fixes.2016.06.15b: Documentation updates
torture.2016.06.14a: Documentation updates

In many cases in the RCU tree code, we iterate over the set of cpus for
a leaf node described by rcu_node::grplo and rcu_node::grphi, checking
per-cpu data for each cpu in this range. However, if the set of possible
cpus is sparse, some cpus described in this range are not possible, and
thus no per-cpu region will have been allocated (or initialised) for
them by the generic percpu code.

Erroneous accesses to a per-cpu area for these !possible cpus may fault
or may hit other data depending on the addressed generated when the
erroneous per cpu offset is applied. In practice, both cases have been
observed on arm64 hardware (the former being silent, but detectable with
additional patches).

To avoid issues resulting from this, we must iterate over the set of
*possible* cpus for a given leaf node. This patch add a new helper,
for_each_leaf_node_possible_cpu, to enable this. As iteration is often
intertwined with rcu_node local bitmask manipulation, a new
leaf_node_cpu_bit helper is added to make this simpler and more
consistent. The RCU tree code is made to use both of these where
appropriate.

Without this patch, running reboot at a shell can result in an oops
like:

[ 3369.075979] Unable to handle kernel paging request at virtual address ffffff8008b21b4c
[ 3369.083881] pgd = ffffffc3ecdda000
[ 3369.087270] [ffffff8008b21b4c] *pgd=00000083eca48003, *pud=00000083eca48003, *pmd=0000000000000000
[ 3369.096222] Internal error: Oops: 96000007 [#1] PREEMPT SMP
[ 3369.101781] Modules linked in:
[ 3369.104825] CPU: 2 PID: 1817 Comm: NetworkManager Tainted: G        W       4.6.0+ #3
[ 3369.121239] task: ffffffc0fa13e000 ti: ffffffc3eb940000 task.ti: ffffffc3eb940000
[ 3369.128708] PC is at sync_rcu_exp_select_cpus+0x188/0x510
[ 3369.134094] LR is at sync_rcu_exp_select_cpus+0x104/0x510
[ 3369.139479] pc : [<ffffff80081109a8>] lr : [<ffffff8008110924>] pstate: 200001c5
[ 3369.146860] sp : ffffffc3eb9435a0
[ 3369.150162] x29: ffffffc3eb9435a0 x28: ffffff8008be4f88
[ 3369.155465] x27: ffffff8008b66c80 x26: ffffffc3eceb2600
[ 3369.160767] x25: 0000000000000001 x24: ffffff8008be4f88
[ 3369.166070] x23: ffffff8008b51c3c x22: ffffff8008b66c80
[ 3369.171371] x21: 0000000000000001 x20: ffffff8008b21b40
[ 3369.176673] x19: ffffff8008b66c80 x18: 0000000000000000
[ 3369.181975] x17: 0000007fa951a010 x16: ffffff80086a30f0
[ 3369.187278] x15: 0000007fa9505590 x14: 0000000000000000
[ 3369.192580] x13: ffffff8008b51000 x12: ffffffc3eb940000
[ 3369.197882] x11: 0000000000000006 x10: ffffff8008b51b78
[ 3369.203184] x9 : 0000000000000001 x8 : ffffff8008be4000
[ 3369.208486] x7 : ffffff8008b21b40 x6 : 0000000000001003
[ 3369.213788] x5 : 0000000000000000 x4 : ffffff8008b27280
[ 3369.219090] x3 : ffffff8008b21b4c x2 : 0000000000000001
[ 3369.224406] x1 : 0000000000000001 x0 : 0000000000000140
...
[ 3369.972257] [<ffffff80081109a8>] sync_rcu_exp_select_cpus+0x188/0x510
[ 3369.978685] [<ffffff80081128b4>] synchronize_rcu_expedited+0x64/0xa8
[ 3369.985026] [<ffffff80086b987c>] synchronize_net+0x24/0x30
[ 3369.990499] [<ffffff80086ddb54>] dev_deactivate_many+0x28c/0x298
[ 3369.996493] [<ffffff80086b6bb8>] __dev_close_many+0x60/0xd0
[ 3370.002052] [<ffffff80086b6d48>] __dev_close+0x28/0x40
[ 3370.007178] [<ffffff80086bf62c>] __dev_change_flags+0x8c/0x158
[ 3370.012999] [<ffffff80086bf718>] dev_change_flags+0x20/0x60
[ 3370.018558] [<ffffff80086cf7f0>] do_setlink+0x288/0x918
[ 3370.023771] [<ffffff80086d0798>] rtnl_newlink+0x398/0x6a8
[ 3370.029158] [<ffffff80086cee84>] rtnetlink_rcv_msg+0xe4/0x220
[ 3370.034891] [<ffffff80086e274c>] netlink_rcv_skb+0xc4/0xf8
[ 3370.040364] [<ffffff80086ced8c>] rtnetlink_rcv+0x2c/0x40
[ 3370.045663] [<ffffff80086e1fe8>] netlink_unicast+0x160/0x238
[ 3370.051309] [<ffffff80086e24b8>] netlink_sendmsg+0x2f0/0x358
[ 3370.056956] [<ffffff80086a0070>] sock_sendmsg+0x18/0x30
[ 3370.062168] [<ffffff80086a21cc>] ___sys_sendmsg+0x26c/0x280
[ 3370.067728] [<ffffff80086a30ac>] __sys_sendmsg+0x44/0x88
[ 3370.073027] [<ffffff80086a3100>] SyS_sendmsg+0x10/0x20
[ 3370.078153] [<ffffff8008085e70>] el0_svc_naked+0x24/0x28
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Dennis Chen <dennis.chen@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

It is not always easy to determine the cause of an RCU stall just by
analysing the RCU stall messages, mainly when the problem is caused
by the indirect starvation of rcu threads. For example, when preempt_rcu
is not awakened due to the starvation of a timer softirq.

We have been hard coding panic() in the RCU stall functions for
some time while testing the kernel-rt. But this is not possible in
some scenarios, like when supporting customers.

This patch implements the sysctl kernel.panic_on_rcu_stall. If
set to 1, the system will panic() when an RCU stall takes place,
enabling the capture of a vmcore. The vmcore provides a way to analyze
all kernel/tasks states, helping out to point to the culprit and the
solution for the stall.

The kernel.panic_on_rcu_stall sysctl is disabled by default.

Changes from v1:
- Fixed a typo in the git log
- The if(sysctl_panic_on_rcu_stall) panic() is in a static function
- Fixed the CONFIG_TINY_RCU compilation issue
- The var sysctl_panic_on_rcu_stall is now __read_mostly

Cc: Jonathan Corbet <corbet@lwn.net>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Tested-by: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

In the area in hot pursuit of a bug, so might as well clean it up.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

Currently, if the very first call to call_rcu_tasks() has irqs disabled,
it will create the rcu_tasks_kthread with irqs disabled, which will
result in a splat in the memory allocator, which kthread_run() invokes
with the expectation that irqs are enabled.

This commit fixes this problem by deferring kthread creation if called
with irqs disabled.  The first call to call_rcu_tasks() that has irqs
enabled will create the kthread.

This bug was detected by rcutorture changes that were motivated by
Iftekhar Ahmed's mutation-testing efforts.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

Usermode Linux currently does not implement arch_irqs_disabled_flags(),
which results in a build failure in TASKS_RCU.  Therefore, this commit
disables the TASKS_RCU Kconfig option in usermode Linux builds.  The
usermode Linux maintainers expect to merge arch_irqs_disabled_flags()
into 4.8, at which point this commit may be reverted.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Jeff Dike <jdike@addtoit.com>
Acked-by: Richard Weinberger <richard@nod.at>

This commit does a compile-time check for rcu_assign_pointer() of NULL,
and uses WRITE_ONCE() rather than smp_store_release() in that case.
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

Fix to return a negative error code -ENOMEM from kcalloc() error
handling case instead of 0, as done elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit enables jitter by default.  It may be manually disabled
by passing "--jitter 0" to kvm.sh.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

0day found a boot warning triggered in rcu_perf_writer() on !SMP kernel:

	WARN_ON(rcu_gp_is_normal() && gp_exp);

, the root cause of which is trying to measure expedited grace
periods(by setting gp_exp to true by default) when all the grace periods
are normal(TINY RCU only has normal grace periods).

However, such a mis-setting would only result in failing to measure the
performance for a specific kind of grace periods, therefore using a
WARN_ON to check this is a little overkilling. We could handle this
inside rcuperf module via some error messages to tell users about the
mis-settings.

Therefore this patch removes the WARN_ON in rcu_perf_writer() and
handles those checkings in rcu_perf_init() with plain if() code.

Moreover, this patch changes the default value of gp_exp to 1) align
with rcutorture tests and 2) make the default setting work for all RCU
implementations by default.
Suggested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Fixes: http://lkml.kernel.org/r/57411b10.mFvG0+AgcrMXGtcj%fengguang.wu@intel.comSigned-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

Because recent testing shows that "-soundhw pcspkr" is no longer required
in the kernel boot arguments, this commit drops this qemu argument.
Reported-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

Do not restrict the cpu type to POWER7 for QEMU as we have POWER8 now.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

The option "-soundhw pcspk" gives me a error on PPC as follow:

qemu-system-ppc64: ISA bus not available for pcspk

This means this option doesn't work on ppc by default. So simply make
this an x86-specific option via identify_qemu_args().
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

The vmlinux image is available for all the architectures, and suitable
for running a KVM guest by QEMU, besides, we used to copy the vmlinux
to $resdir anyway. Therefore it makes sense to use it as the fallback
kernel image for rcutorture KVM tests.

This patch makes identify_boot_image() return vmlinux if
${TORTURE_BOOT_IMAGE} is not set on non-x86 architectures, also fixes
several places that hard-code "bzImage" as $KERNEL.

This also fixes a problem that PPC doesn't have a bzImage file as build
results.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

Using dracut is another way to get an initramfs for KVM-based RCU
torture tests, which is more flexible than using the host's initramfs
image, because modules and binaries may be added or removed via dracut
command options. So add an example in the document, in case that there
are some situations where host's initramfs couldn't be used.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

If the whole system has only one cpu, that cpu won't be able to be
offlined, so there is no need onoff task is stil running.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit adds a string of the form "Starves: 10" to the summary
line for error conditions found in the console output.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit breaks torture_online() and torture_offline() out of
torture_onoff() in preparation for allowing waketorture finer-grained
control of its CPU-hotplug workload.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit avoids killing qemu if a trace dump is making progress
or if console log output is continuing and the console log timestamp
does not exceed the total plus grace period.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit removes CONFIG_RCU_TORTURE_TEST_RUNNABLE in favor of the
already-existing rcutorture.torture_runnable kernel boot parameter.
It also converts an #ifdef into IS_ENABLED(), saving a few lines of code.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit applies the infamous IS_ENABLED() macro to eliminate a #ifdef.
It also eliminates the RCU_PERF_TEST_RUNNABLE Kconfig option in favor
of the already-existing rcuperf.perf_runnable kernel boot parameter.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

People have been having some difficulty finding their way around the
RCU code.  This commit therefore pulls some of the expedited grace-period
code from tree_plugin.h to a new tree_exp.h file.  This commit is strictly
code movement.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

People have been having some difficulty finding their way around the
RCU code.  This commit therefore pulls some of the expedited grace-period
code from tree.c to a new tree_exp.h file.  This commit is strictly code
movement, with the exception of a forward declaration that was added
for the sync_sched_exp_online_cleanup() function.

A subsequent commit will move the remaining expedited grace-period code
from tree_plugin.h to tree_exp.h.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

I think you'll find this condition is superfluous, as the whole function
is under #ifdef of that same.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

In the past, RCU grace-period initialization excluded CPU-hotplug
operations, but this is no longer the case.  This commit therefore
removed an outdated comment in rcu_gp_init() claiming that these
are excluded.
Reported-by: Lihao Liang <lihao.liang@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

The comment header for rcu_scheduler_active states that it is used
to optimize synchronize_sched() at early boot.  This is incorrect.
The synchronize_sched() function instead checks the number of online
CPUs.  This commit therefore replaces the comment's synchronize_sched()
with synchronize_rcu(), which really does use rcu_scheduler_active for
this purpose.
Reported-by: Lihao Liang <lihao.liang@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

Reported-by: Jim Roskind <jar@roskind.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

Reported-by: Jim Roskind <jar@roskind.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

Pull parisc fixes from Helge Deller:

 - Fix printk time stamps on SMP systems which got wrong due to a patch
   which was added during the merge window

 - Fix two bugs in the stack backtrace code: Races in module unloading
   and possible invalid accesses to memory due to wrong instruction
   decoding (Mikulas Patocka)

 - Fix userspace crash when syscalls access invalid unaligned userspace
   addresses.  Those syscalls will now return EFAULT as expected.
   (tagged for stable kernel series)

* 'parisc-4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Move die_if_kernel() prototype into traps.h header
  parisc: Fix pagefault crash in unaligned __get_user() call
  parisc: Fix printk time during boot
  parisc: Fix backtrace on PA-RISC

Pull key handling update from James Morris:
 "This alters a new keyctl function added in the current merge window to
  allow for a future extension planned for the next merge window"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  KEYS: Add placeholder for KDF usage with DH

The /dev/ptmx device node is changed to lookup the directory entry "pts"
in the same directory as the /dev/ptmx device node was opened in.  If
there is a "pts" entry and that entry is a devpts filesystem /dev/ptmx
uses that filesystem.  Otherwise the open of /dev/ptmx fails.

The DEVPTS_MULTIPLE_INSTANCES configuration option is removed, so that
userspace can now safely depend on each mount of devpts creating a new
instance of the filesystem.

Each mount of devpts is now a separate and equal filesystem.

Reserved ttys are now available to all instances of devpts where the
mounter is in the initial mount namespace.

A new vfs helper path_pts is introduced that finds a directory entry
named "pts" in the directory of the passed in path, and changes the
passed in path to point to it.  The helper path_pts uses a function
path_parent_directory that was factored out of follow_dotdot.

In the implementation of devpts:
 - devpts_mnt is killed as it is no longer meaningful if all mounts of
   devpts are equal.
 - pts_sb_from_inode is replaced by just inode->i_sb as all cached
   inodes in the tty layer are now from the devpts filesystem.
 - devpts_add_ref is rolled into the new function devpts_ptmx.  And the
   unnecessary inode hold is removed.
 - devpts_del_ref is renamed devpts_release and reduced to just a
   deacrivate_super.
 - The newinstance mount option continues to be accepted but is now
   ignored.

In devpts_fs.h definitions for when !CONFIG_UNIX98_PTYS are removed as
they are never used.

Documentation/filesystems/devices.txt is updated to describe the current
situation.

This has been verified to work properly on openwrt-15.05, centos5,
centos6, centos7, debian-6.0.2, debian-7.9, debian-8.2, ubuntu-14.04.3,
ubuntu-15.10, fedora23, magia-5, mint-17.3, opensuse-42.1,
slackware-14.1, gentoo-20151225 (13.0?), archlinux-2015-12-01.  With the
caveat that on centos6 and on slackware-14.1 that there wind up being
two instances of the devpts filesystem mounted on /dev/pts, the lower
copy does not end up getting used.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Greg KH <greg@kroah.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Serge Hallyn <serge.hallyn@ubuntu.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
Cc: Jann Horn <jann@thejh.net>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Florian Weimer <fw@deneb.enyo.de>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Helge Deller <deller@gmx.de>

One of the debian buildd servers had this crash in the syslog without
any other information:

 Unaligned handler failed, ret = -2
 clock_adjtime (pid 22578): Unaligned data reference (code 28)
 CPU: 1 PID: 22578 Comm: clock_adjtime Tainted: G  E  4.5.0-2-parisc64-smp #1 Debian 4.5.4-1
 task: 000000007d9960f8 ti: 00000001bde7c000 task.ti: 00000001bde7c000

      YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
 PSW: 00001000000001001111100000001111 Tainted: G            E
 r00-03  000000ff0804f80f 00000001bde7c2b0 00000000402d2be8 00000001bde7c2b0
 r04-07  00000000409e1fd0 00000000fa6f7fff 00000001bde7c148 00000000fa6f7fff
 r08-11  0000000000000000 00000000ffffffff 00000000fac9bb7b 000000000002b4d4
 r12-15  000000000015241c 000000000015242c 000000000000002d 00000000fac9bb7b
 r16-19  0000000000028800 0000000000000001 0000000000000070 00000001bde7c218
 r20-23  0000000000000000 00000001bde7c210 0000000000000002 0000000000000000
 r24-27  0000000000000000 0000000000000000 00000001bde7c148 00000000409e1fd0
 r28-31  0000000000000001 00000001bde7c320 00000001bde7c350 00000001bde7c218
 sr00-03  0000000001200000 0000000001200000 0000000000000000 0000000001200000
 sr04-07  0000000000000000 0000000000000000 0000000000000000 0000000000000000

 IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000402d2e84 00000000402d2e88
  IIR: 0ca0d089    ISR: 0000000001200000  IOR: 00000000fa6f7fff
  CPU:        1   CR30: 00000001bde7c000 CR31: ffffffffffffffff
  ORIG_R28: 00000002369fe628
  IAOQ[0]: compat_get_timex+0x2dc/0x3c0
  IAOQ[1]: compat_get_timex+0x2e0/0x3c0
  RP(r2): compat_get_timex+0x40/0x3c0
 Backtrace:
  [<00000000402d4608>] compat_SyS_clock_adjtime+0x40/0xc0
  [<0000000040205024>] syscall_exit+0x0/0x14

This means the userspace program clock_adjtime called the clock_adjtime()
syscall and then crashed inside the compat_get_timex() function.
Syscalls should never crash programs, but instead return EFAULT.

The IIR register contains the executed instruction, which disassebles
into "ldw 0(sr3,r5),r9".
This load-word instruction is part of __get_user() which tried to read the word
at %r5/IOR (0xfa6f7fff). This means the unaligned handler jumped in.  The
unaligned handler is able to emulate all ldw instructions, but it fails if it
fails to read the source e.g. because of page fault.

The following program reproduces the problem:

#define _GNU_SOURCE
#include <unistd.h>
#include <sys/syscall.h>
#include <sys/mman.h>

int main(void) {
        /* allocate 8k */
        char *ptr = mmap(NULL, 2*4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);
        /* free second half (upper 4k) and make it invalid. */
        munmap(ptr+4096, 4096);
        /* syscall where first int is unaligned and clobbers into invalid memory region */
        /* syscall should return EFAULT */
        return syscall(__NR_clock_adjtime, 0, ptr+4095);
}

To fix this issue we simply need to check if the faulting instruction address
is in the exception fixup table when the unaligned handler failed. If it
is, call the fixup routine instead of crashing.

While looking at the unaligned handler I found another issue as well: The
target register should not be modified if the handler was unsuccessful.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org

Avoid showing invalid printk time stamps during boot.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Aaro Koskinen <aaro.koskinen@iki.fi>

This patch fixes backtrace on PA-RISC

There were several problems:

1) The code that decodes instructions handles instructions that subtract
from the stack pointer incorrectly. If the instruction subtracts the
number X from the stack pointer the code increases the frame size by
(0x100000000-X).  This results in invalid accesses to memory and
recursive page faults.

2) Because gcc reorders blocks, handling instructions that subtract from
the frame pointer is incorrect. For example, this function
	int f(int a)
	{
		if (__builtin_expect(a, 1))
			return a;
		g();
		return a;
	}
is compiled in such a way, that the code that decreases the stack
pointer for the first "return a" is placed before the code for "g" call.
If we recognize this decrement, we mistakenly believe that the frame
size for the "g" call is zero.

To fix problems 1) and 2), the patch doesn't recognize instructions that
decrease the stack pointer at all. To further safeguard the unwind code
against nonsense values, we don't allow frame size larger than
Total_frame_size.

3) The backtrace is not locked. If stack dump races with module unload,
invalid table can be accessed.

This patch adds a spinlock when processing module tables.

Note, that for correct backtrace, you need recent binutils.
Binutils 2.18 from Debian 5 produce garbage unwind tables.
Binutils 2.21 work better (it sometimes forgets function frames, but at
least it doesn't generate garbage).
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Helge Deller <deller@gmx.de>

Pull drm fixes from Dave Airlie:
 "A bunch of ARM drivers got into the fixes vibe this time around, so
  this contains a bunch of fixes for imx, atmel hlcdc, arm hdlcd (only
  so many combos of hlcd), mediatek and omap drm.

  Other than that there is one mgag200 fix and a few core drm regression
  fixes"

* tag 'drm-fixes-for-v4.7-rc2' of git://people.freedesktop.org/~airlied/linux: (34 commits)
  drm/omap: fix unused variable warning.
  drm: hdlcd: Add information about the underlying framebuffers in debugfs
  drm: hdlcd: Cleanup the atomic plane operations
  drm/hdlcd: Fix up crtc_state->event handling
  drm: hdlcd: Revamp runtime power management
  drm/mediatek: mtk_dsi: Remove spurious drm_connector_unregister
  drm/mediatek: mtk_dpi: remove invalid error message
  drm: atmel-hlcdc: fix a NULL check
  drm: atmel-hlcdc: fix atmel_hlcdc_crtc_reset() implementation
  drm/mgag200: Black screen fix for G200e rev 4
  drm: Wrap direct calls to driver->gem_free_object from CMA
  drm: fix fb refcount issue with atomic modesetting
  drm: make drm_atomic_set_mode_prop_for_crtc() more reliable
  drm/sti: remove extra mode fixup
  drm: add missing drm_mode_set_crtcinfo call
  drm/omap: include gpio/consumer.h where needed
  drm/omap: include linux/seq_file.h where needed
  Revert "drm/omap: no need to select OMAP2_DSS"
  drm/omap: Remove regulator API abuse
  OMAPDSS: HDMI5: Change DDC timings
  ...