- 28 Jan, 2021 11 commits
-
-
Maxime Ripard authored
We introduced the BCM2711 support to the vc4 HDMI controller with 5.10, but this was lacking any of the interrupts of the CEC controller so we have to deal with the backward compatibility. Do so by simply ignoring the CEC setup if the DT doesn't have the interrupts property. Reviewed-by:
Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Acked-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by:
-
Dom Cobley authored
Now that our HDMI controller supports CEC for the BCM2711, let's remove that flag. Reviewed-by:
Dom Cobley <popcornmix@gmail.com> Signed-off-by:
-
Maxime Ripard authored
The HDMI controller found in the BCM2711 has an external interrupt controller for the CEC and hotplug interrupt shared between the two instances. Let's add a variant flag to register a single interrupt handler and deals with the interrupt handler setup, or two interrupt handlers relying on an external irqchip. Signed-off-by:
-
Maxime Ripard authored
The BCM2711 has two different interrupt sources to transmit and receive CEC messages, provided through an external interrupt chip shared between the two HDMI interrupt controllers. The rest of the CEC controller is identical though so we need to change a bit the code organisation to share the code as much as possible, yet still allowing to register independent handlers. Signed-off-by:
-
Maxime Ripard authored
While the BCM2835 had the CEC clock derived from the HSM clock, the BCM2711 has a dedicated parent clock for it. Let's introduce a separate clock for it so that we can handle both cases. Reviewed-by:
-
Maxime Ripard authored
As part of the enable sequence we might change the HSM clock rate if the pixel rate is different than the one we were already dealing with. On the BCM2835 however, the CEC clock derives from the HSM clock so any rate change will need to be reflected in the CEC clock divider to output 40kHz. Fixes: cd4cb49d ("drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate") Reviewed-by:
-
Maxime Ripard authored
The CEC clock divider needs to output a frequency of 40kHz from the HSM rate on the BCM2835. The driver used to have a fixed frequency for it, but that changed for the BCM2711 and we now need to compute it dynamically to maintain the proper rate. Fixes: cd4cb49d ("drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate") Reviewed-by:
-
Dom Cobley authored
Currently we call cec_phys_addr_invalidate on a hotplug deassert. That may be due to a TV power cycling, or an AVR being switched on (and switching edid). This makes CEC unusable since our controller wouldn't have a physical address anymore. Set it back up again on the hotplug assert. Fixes: 15b4511a ("drm/vc4: add HDMI CEC support") Signed-off-by:
-
Dom Cobley authored
The commit 311e305f ("drm/vc4: hdmi: Implement a register layout abstraction") forgot one CEC register, and made a copy and paste mistake for another one. Fix those mistakes. Fixes: 311e305f ("drm/vc4: hdmi: Implement a register layout abstraction") Reviewed-by:
-
Dom Cobley authored
The code prior to 311e305f ("drm/vc4: hdmi: Implement a register layout abstraction") was relying on the fact that the register offset was incremented by 4 for each readl call. That worked since the register width is 4 bytes. However, since that commit the HDMI_READ macro is now taking an enum, and the offset doesn't increment by 4 but 1 now. Divide the index by 4 to fix this. Fixes: 311e305f ("drm/vc4: hdmi: Implement a register layout abstraction") Reviewed-by:
-
Dom Cobley authored
The hdmi reset got moved to a later point in the commit 9045e91a ("drm/vc4: hdmi: Add reset callback"). However, the reset now occurs after vc4_hdmi_cec_init and so tramples the setup of registers like HDMI_CEC_CNTRL_1 This only affects pi0-3 as on pi4 the cec registers are in a separate block Fixes: 9045e91a ("drm/vc4: hdmi: Add reset callback") Reviewed-by:
-
- 27 Jan, 2021 1 commit
-
-
Menglong Dong authored
The 'r' in dsi_vc_send_short() is of type 'unsigned int', so the 'r < 0' can't be true. Fix this by introducing a 'err' of type 'int' insteaded. Fixes: 1ed62538 ("drm/omap: dsi: switch dsi_vc_send_long/short to mipi_dsi_msg") Signed-off-by:
Menglong Dong <dong.menglong@zte.com.cn> Reviewed-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210127015117.23267-1-dong.menglong@zte.com.cn
-
- 24 Jan, 2021 2 commits
-
-
Simon Ser authored
Add a new entry for "type" in the section for standard plane properties. v3: improve paragraph about mixing legacy IOCTLs with explicit usage, note that a driver may support cursors without cursor planes (Daniel) v4: fixing rebase gone wrong v5: - Fix typo (Daniel) - Mention CAP_ATOMIC instead of CAP_UNIVERSAL_PLANES when referring to atomic test-only commits (Daniel) - Add newlines at end of sections (Daniel) Signed-off-by:
Simon Ser <contact@emersion.fr> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Pekka Paalanen <pekka.paalanen@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210115110626.12233-2-contact@emersion.fr
-
Simon Ser authored
The docs for enum drm_plane_type mention legacy IOCTLs, however the plane type is not tied to legacy IOCTLs, the drm_cursor.primary and cursor fields are. Add a small paragraph to reference these. Instead, document expectations for primary and cursor planes for non-legacy userspace. Note that these docs are for driver developers, not userspace developers, so internal kernel APIs are mentionned. Signed-off-by:
Daniel Vetter <daniel@ffwll.ch> Acked-by:
-
- 22 Jan, 2021 8 commits
-
-
Marek Vasut authored
NXP's i.MX8MM has an LCDIF as well. Signed-off-by:
Marek Vasut <marex@denx.de> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210115222304.5427-4-laurent.pinchart@ideasonboard.com
-
Laurent Pinchart authored
Additional compatible strings have been added in DT source for the i.MX6SL, i.MX6SLL, i.MX6UL and i.MX7D without updating the bindings. Most of the upstream DT sources use the fsl,imx28-lcdif compatible string, which mostly predates the realization that the LCDIF in the i.MX6 and newer SoCs have extra features compared to the i.MX28. Update the bindings to add the missing compatible strings, with the correct fallback values. This fails to validate some of the upstream DT sources. Instead of adding the incorrect compatible fallback to the binding, the sources should be updated separately. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Reviewed-by:
-
Laurent Pinchart authored
Convert the mxsfb binding to YAML. The deprecated binding is dropped, as neither the DT sources nor the driver support it anymore. The converted binding is named fsl,lcdif.yaml to match the usual bindings naming scheme. The compatible strings are messy, and DT sources use different kinds of combination of documented and undocumented values. Keep it simple for now, and update the example to make it valid. Aligning the binding with the existing DT sources will be performed separately. Signed-off-by:
-
Lukasz Luba authored
The simple_ondemand devfreq governor uses two thresholds to decide about the frequency change: upthreshold, downdifferential. These two tunable change the behavior of the governor decision, e.g. how fast to increase the frequency or how rapidly limit the frequency. This patch adds needed governor data with thresholds values gathered experimentally in different workloads. Signed-off-by:
Lukasz Luba <lukasz.luba@arm.com> Reviewed-by:
Steven Price <steven.price@arm.com> Signed-off-by:
-
Veera Sundaram Sankaran authored
The explicit out-fences in crtc are signaled as part of vblank event, indicating all framebuffers present on the Atomic Commit request are scanned out on the screen. Though the fence signal and the vblank event notification happens at the same time, triggered by the same hardware vsync event, the timestamp set in both are different. With drivers supporting precise vblank timestamp the difference between the two timestamps would be even higher. This might have an impact on use-mode frameworks using these fence timestamps for purposes other than simple buffer usage. For instance, the Android framework [1] uses the retire-fences as an alternative to vblank when frame-updates are in progress. Set the fence timestamp during send vblank event using a new drm_send_event_timestamp_locked variant to avoid discrepancies. [1] https://android.googlesource.com/platform/frameworks/native/+/master/ services/surfaceflinger/Scheduler/Scheduler.cpp#397 Changes in v2: - Use drm_send_event_timestamp_locked to update fence timestamp - add more information to commit text Changes in v3: - use same backend helper function for variants of drm_send_event to avoid code duplications Changes in v4: - remove WARN_ON from drm_send_event_timestamp_locked Signed-off-by:
Veera Sundaram Sankaran <veeras@codeaurora.org> Reviewed-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
Sumit Semwal <sumit.semwal@linaro.org> [sumits: minor parenthesis alignment correction] Link: https://patchwork.freedesktop.org/patch/msgid/1610757107-11892-2-git-send-email-veeras@codeaurora.org
-
Veera Sundaram Sankaran authored
Some drivers have hardware capability to get the precise HW timestamp of certain events based on which the fences are triggered. The delta between the event HW timestamp & current HW reference timestamp can be used to calculate the timestamp in kernel's CLOCK_MONOTONIC time domain. This allows it to set accurate timestamp factoring out any software and IRQ latencies. Add a timestamp variant of fence signal function, dma_fence_signal_timestamp to allow drivers to update the precise timestamp for fences. Changes in v2: - Add a new fence signal variant instead of modifying fence struct Changes in v3: - Add timestamp domain information to commit-text and dma_fence_signal_timestamp documentation Signed-off-by:
-
John Stultz authored
Every heap needs to create a dmabuf and then export it to a fd via dma_buf_fd(), so to consolidate things a bit, have the heaps just return a struct dmabuf * and let the top level dma_heap_buffer_alloc() call handle creating the fd via dma_buf_fd(). Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Liam Mark <lmark@codeaurora.org> Cc: Laura Abbott <labbott@kernel.org> Cc: Brian Starkey <Brian.Starkey@arm.com> Cc: Hridya Valsaraju <hridya@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Sandeep Patil <sspatil@google.com> Cc: Daniel Mentz <danielmentz@google.com> Cc: Chris Goldsworthy <cgoldswo@codeaurora.org> Cc: Ørjan Eide <orjan.eide@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Ezequiel Garcia <ezequiel@collabora.com> Cc: Simon Ser <contact@emersion.fr> Cc: James Jones <jajones@nvidia.com> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
John Stultz authored
If we abort from the allocation due to a fatal_signal_pending(), be sure we report an error so any return code paths don't trip over the fact that the allocation didn't succeed. Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Liam Mark <lmark@codeaurora.org> Cc: Laura Abbott <labbott@kernel.org> Cc: Brian Starkey <Brian.Starkey@arm.com> Cc: Hridya Valsaraju <hridya@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Sandeep Patil <sspatil@google.com> Cc: Daniel Mentz <danielmentz@google.com> Cc: Chris Goldsworthy <cgoldswo@codeaurora.org> Cc: Ørjan Eide <orjan.eide@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Ezequiel Garcia <ezequiel@collabora.com> Cc: Simon Ser <contact@emersion.fr> Cc: James Jones <jajones@nvidia.com> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Suggested-by:
Suren Baghdasaryan <surenb@google.com> Signed-off-by:
-
- 21 Jan, 2021 3 commits
-
-
Daniel Vetter authored
Internship season is starting, let's review this. One thing that's pending is Maxime's work to roll out drm_atomic_state pointers to all callbacks, he said he'll remove that entry once it's all done. v2: Fix typos (Maxime) Acked-by:
Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210121112919.1460322-1-daniel.vetter@ffwll.ch
-
Christian König authored
Rename ttm_bo_device to ttm_device. Rename ttm_bo_driver to ttm_device_funcs. Rename ttm_bo_global to ttm_global. Move global and device related functions to ttm_device.[ch]. No functional change. Signed-off-by:
Christian König <christian.koenig@amd.com> Acked-by:
-
Maxime Ripard authored
There's currently four users of the same logic to wait for a commit to be flipped: three for the CRTCs, connectors and planes in drm_atomic_helper_wait_for_dependencies, and one in vc4. Let's consolidate this a bit to avoid any code duplication. Suggested-by:
-
- 20 Jan, 2021 10 commits
-
-
Zack Rusin authored
We were not correctly unpinning no longer needed buffers. In particular vmw_buffer_object, which is internally often pinned on creation wasn't unpinned on destruction and none of the internal MOB buffers were unpinned before being put back. Technically this existed for a long time but commit 57fcd550 ("drm/ttm: Warn on pinning without holding a reference") introduced a WARN_ON which was filling up the kernel logs rather quickly. Quite frankly internal usage of vmw_buffer_object and in general pinning needs to be refactored in vmwgfx but for now this makes it work. Signed-off-by:
Zack Rusin <zackr@vmware.com> Reviewed-by:
Martin Krastev <krastevm@vmware.com> Reviewed-by:
Roland Scheidegger <sroland@vmware.com> Fixes: 57fcd550 ("drm/ttm: Warn on pinning without holding a reference") Link: https://patchwork.freedesktop.org/patch/414984/?series=86052&rev=1 Cc: Huang Rui <ray.huang@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Christian Koenig <christian.koenig@amd.com> Cc: dri-devel@lists.freedesktop.org
-
Bjorn Andersson authored
The meta-schema recently gained a definition for the common -supply$ property, which denotes that maxItems is not a valid property. Drop this to clear up the binding validation error. Fixes: a46c1125 ("dt-bindings: dp-connector: add binding for DisplayPort connector") Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Jared Baldridge authored
The OneGX1 Pro has a fairly unique combination of generic strings, but we additionally match on the BIOS date just to be safe. Signed-off-by:
Jared Baldridge <jrb@expunge.us> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Christian König authored
DRM_SYNCOBJ_WAIT_FLAGS_WAIT_FOR_SUBMIT can't be used when we hold locks since we are basically waiting for userspace to do something. Holding a lock while doing so can trivial deadlock with page faults etc... So make lockdep complain when a driver tries to do this. v2: Add lockdep_assert_none_held() macro. v3: Add might_sleep() and also use lockdep_assert_none_held() in the IOCTL path. Signed-off-by:Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://patchwork.freedesktop.org/patch/414944/
-
Christian König authored
Only initialize the DMA coherent pools if they are used. Signed-off-by:
-
Christian König authored
Useful for testing. v2: add fs_reclaim_acquire()/_release() Signed-off-by:
-
Christian König authored
Instead of printing this on the per device pool. Signed-off-by:
-
Christian König authored
As far as I can tell the buffer_count was never used by an userspace application. The number of BOs in the system is far better suited in debugfs than sysfs and we now should be able to add other information here as well. v2: add that additionally to sysfs Signed-off-by:
-
Lauri Kasanen authored
Add "r5g5b5a1" which is used on the N64. Signed-off-by:
Lauri Kasanen <cand@gmx.com> Reviewed-by:
-
Peter Robinson authored
The info message was showing the mapped address for the framebuffer. To avoid security problems, all virtual addresses are converted to __ptrval__, so the message has pointless information: simple-framebuffer 3ea9b000.framebuffer: framebuffer at 0x3ea9b000, 0x12c000 bytes, mapped to 0x(____ptrval____) Drop the extraneous bits to clean up the message: simple-framebuffer 3ea9b000.framebuffer: framebuffer at 0x3ea9b000, 0x12c000 bytes Signed-off-by:
Peter Robinson <pbrobinson@gmail.com> Reviewed-by:
-
- 19 Jan, 2021 5 commits
-
-
Lee Jones authored
Also add missing description for 'refcount' Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/vmwgfx/ttm_object.c:60: error: Cannot parse struct or union! Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Roland Scheidegger <sroland@vmware.com> Cc: Zack Rusin <zackr@vmware.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Rob Clark <rob.clark@linaro.org> Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/vmwgfx/vmwgfx_thp.c:21: warning: Function parameter or member 'manager' not described in 'vmw_thp_manager' Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Roland Scheidegger <sroland@vmware.com> Cc: Zack Rusin <zackr@vmware.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/vmwgfx/ttm_object.c:60: error: Cannot parse struct or union! drivers/gpu/drm/vmwgfx/ttm_object.c:97: warning: Function parameter or member 'mem_glob' not described in 'ttm_object_device' drivers/gpu/drm/vmwgfx/ttm_object.c:97: warning: Function parameter or member 'ops' not described in 'ttm_object_device' drivers/gpu/drm/vmwgfx/ttm_object.c:97: warning: Function parameter or member 'dmabuf_release' not described in 'ttm_object_device' drivers/gpu/drm/vmwgfx/ttm_object.c:97: warning: Function parameter or member 'dma_buf_size' not described in 'ttm_object_device' drivers/gpu/drm/vmwgfx/ttm_object.c:97: warning: Function parameter or member 'idr' not described in 'ttm_object_device' drivers/gpu/drm/vmwgfx/ttm_object.c:128: warning: Function parameter or member 'rcu_head' not described in 'ttm_ref_object' drivers/gpu/drm/vmwgfx/ttm_object.c:128: warning: Function parameter or member 'tfile' not described in 'ttm_ref_object' drivers/gpu/drm/vmwgfx/ttm_object.c:582: warning: Function parameter or member 'dmabuf' not described in 'get_dma_buf_unless_doomed' drivers/gpu/drm/vmwgfx/ttm_object.c:582: warning: Excess function parameter 'dma_buf' description in 'get_dma_buf_unless_doomed' Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Roland Scheidegger <sroland@vmware.com> Cc: Zack Rusin <zackr@vmware.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Rob Clark <rob.clark@linaro.org> Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/vmwgfx/vmwgfx_validation.c:85: warning: Function parameter or member 'dirty' not described in 'vmw_validation_res_node' drivers/gpu/drm/vmwgfx/vmwgfx_validation.c:85: warning: Function parameter or member 'dirty_set' not described in 'vmw_validation_res_node' drivers/gpu/drm/vmwgfx/vmwgfx_validation.c:216: warning: Function parameter or member 'res' not described in 'vmw_validation_find_res_dup' drivers/gpu/drm/vmwgfx/vmwgfx_validation.c:216: warning: Excess function parameter 'vbo' description in 'vmw_validation_find_res_dup' Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Roland Scheidegger <sroland@vmware.com> Cc: Zack Rusin <zackr@vmware.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/vmwgfx/vmwgfx_blit.c:452: warning: Function parameter or member 'diff' not described in 'vmw_bo_cpu_blit' Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Roland Scheidegger <sroland@vmware.com> Cc: Zack Rusin <zackr@vmware.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
