The commit 3c9ef511 ("bonding: avoid adding slave device with
IFF_MASTER flag") fix a crash when add slave device with IFF_MASTER,
but it rejects the scenario of nested bonding device.

As Eric Dumazet described: since there indeed is a usage scenario about
nesting bonding, we should not break it.

So we add a new judgment condition to allow nesting of bonding device.

Fixes: 3c9ef511 ("bonding: avoid adding slave device with IFF_MASTER flag")
Suggested-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Di Zhu <zhudi21@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
pull request (net): ipsec 2021-06-23

1) Don't return a mtu smaller than 1280 on IPv6 pmtu discovery.
   From Sabrina Dubroca

2) Fix seqcount rcu-read side in xfrm_policy_lookup_bytype
   for the PREEMPT_RT case. From Varad Gautam.

3) Remove a repeated declaration of xfrm_parse_spi.
   From Shaokun Zhang.

4) IPv4 beet mode can't handle fragments, but IPv6 does.
   commit 68dc022d ("xfrm: BEET mode doesn't support
   fragments for inner packets") handled IPv4 and IPv6
   the same way. Relax the check for IPv6 because fragments
   are possible here. From Xin Long.

5) Memory allocation failures are not reported for
   XFRMA_ENCAP and XFRMA_COADDR in xfrm_state_construct.
   Fix this by moving both cases in front of the function.

6) Fix a missing initialization in the xfrm offload fallback
   fail case for bonding devices. From Ayush Sawal.

Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Nicolas Dichtel updates MAINTAINERS file to add Netfilter IRC channel.

2) Skip non-IPv6 packets in nft_exthdr.

3) Skip non-TCP packets in nft_osf.

4) Skip non-TCP/UDP packets in nft_tproxy.

5) Memleak in hardware offload infrastructure when counters are used
   for first time in a rule.

6) The VLAN transfer routine must use FLOW_DISSECTOR_KEY_BASIC instead
   of FLOW_DISSECTOR_KEY_CONTROL. Moreover, make a more robust check
   for 802.1q and 802.1ad to restore simple matching on transport
   protocols.

7) Fix bogus EPERM when listing a ruleset when table ownership flag
   is set on.

8) Honor table ownership flag when table is referenced by handle.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When changing number of TX queues using ethtool:

	# ethtool -L eth0 tx 1
	[  135.301047] Unable to handle kernel paging request at virtual address 00000000af5d0000
	[...]
	[  135.525128] Call trace:
	[  135.525142]  dma_release_from_dev_coherent+0x2c/0xb0
	[  135.525148]  dma_free_attrs+0x54/0xe0
	[  135.525156]  k3_cppi_desc_pool_destroy+0x50/0xa0
	[  135.525164]  am65_cpsw_nuss_remove_tx_chns+0x88/0xdc
	[  135.525171]  am65_cpsw_set_channels+0x3c/0x70
	[...]

This is because k3_cppi_desc_pool_destroy() which is called after
k3_udma_glue_release_tx_chn() in am65_cpsw_nuss_remove_tx_chns()
references struct device that is unregistered at the end of
k3_udma_glue_release_tx_chn()

Therefore the right order is to call k3_cppi_desc_pool_destroy() and
destroy desc pool before calling k3_udma_glue_release_tx_chn().
Fix this throughout the driver.

Fixes: 93a76530 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Resetting software indexes in bcm4908_dma_alloc_buf_descs() is not
enough as it's called during device probe only. Driver resets DMA on
every .ndo_open callback and it's required to reset indexes then.

This fixes inconsistent rings state and stalled traffic after interface
down & up sequence.

Fixes: 4feffead ("net: broadcom: bcm4908enet: add BCM4908 controller driver")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

When doing source address validation, the flowi4 struct used for
fib_lookup should be in the reverse direction to the given skb.
fl4_dport and fl4_sport returned by fib4_rules_early_flow_dissect
should thus be swapped.

Fixes: 5a847a6e ("net/ipv4: Initialize proto and ports in flow struct")
Signed-off-by: Miao Wang <shankerwangmiao@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The following steps will definitely cause the kernel to crash:
	ip link add vrf1 type vrf table 1
	modprobe bonding.ko max_bonds=1
	echo "+vrf1" >/sys/class/net/bond0/bonding/slaves
	rmmod bonding

The root cause is that: When the VRF is added to the slave device,
it will fail, and some cleaning work will be done. because VRF device
has IFF_MASTER flag, cleanup process  will not clear the IFF_BONDING flag.
Then, when we unload the bonding module, unregister_netdevice_notifier()
will treat the VRF device as a bond master device and treat netdev_priv()
as struct bonding{} which actually is struct net_vrf{}.

By analyzing the processing logic of bond_enslave(), it seems that
it is not allowed to add the slave device with the IFF_MASTER flag, so
we need to add a code check for this situation.
Signed-off-by: Di Zhu <zhudi21@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 6c11fbf9 ("ip6_tunnel: add MPLS transmit support")
moved assiging inner_ipproto down from ipxip6_tnl_xmit() to
its callee ip6_tnl_xmit(). The latter is also used by GRE.

Since commit 38720352 ("gre: Use inner_proto to obtain inner
header protocol") GRE had been depending on skb->inner_protocol
during segmentation. It sets it in gre_build_header() and reads
it in gre_gso_segment(). Changes to ip6_tnl_xmit() overwrite
the protocol, resulting in GSO skbs getting dropped.

Note that inner_protocol is a union with inner_ipproto,
GRE uses the former while the change switched it to the latter
(always setting it to just IPPROTO_GRE).

Restore the original location of skb_set_inner_ipproto(),
it is unclear why it was moved in the first place.

Fixes: 6c11fbf9 ("ip6_tunnel: add MPLS transmit support")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tested-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mat Martineau says:

====================
mptcp: Fixes for v5.13

Here are two MPTCP fixes from Paolo.

Patch 1 fixes some possible connect-time race conditions with
MPTCP-level connection state changes.

Patch 2 deletes a duplicate function declaration.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

commit 78962489 ("mptcp: add skeleton to sync msk socket
options to subflows") introduced a duplicate declaration of
mptcp_setsockopt(), just drop it.
Reported-by: Florian Westphal <fw@strlen.de>
Fixes: 78962489 ("mptcp: add skeleton to sync msk socket options to subflows")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The msk socket state is currently updated in a few spots without
owning the msk socket lock itself.

Some of such operations are safe, as they happens before exposing
the msk socket to user-space and can't race with other changes.

A couple of them, at connect time, can actually race with close()
or shutdown(), leaving breaking the socket state machine.

This change addresses the issue moving such update under the msk
socket lock with the usual:

<acquire spinlock>
<check sk lock onwers>
<ev defer to release_cb>

scheme.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/56
Fixes: 8fd73804 ("mptcp: fallback in case of simultaneous connect")
Fixes: c3c123d1 ("net: mptcp: don't hang in mptcp_sendmsg() after TCP fallback")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The fail path of efx_ef10_sriov_alloc_vf_vswitching is identical to the
full content of efx_ef10_sriov_free_vf_vswitching, so replace it for a
single call to efx_ef10_sriov_free_vf_vswitching.
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

During SRIOV disabling it is checked wether any VF is currently attached
to a guest, using pci_vfs_assigned function. However, this check only
works with VFs attached with Xen, not with vfio/KVM. Added comments
clarifying this point.

Also, replaced manual check of PCI_DEV_FLAGS_ASSIGNED flag and used the
helper function pci_is_dev_assigned instead.
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If SRIOV cannot be disabled during device removal or module unloading,
return error code so it can be logged properly in the calling function.

Note that this can only happen if any VF is currently attached to a
guest using Xen, but not with vfio/KVM. Despite that in that case the
VFs won't work properly with PF removed and/or the module unloaded, I
have let it as is because I don't know what side effects may have
changing it, and also it seems to be the same that other drivers are
doing in this situation.

In the case of being called during SRIOV reconfiguration, the behavior
hasn't changed because the function is called with force=false.
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If pci_remove was called for a PF with VFs, the removal of the VFs was
called twice from efx_ef10_sriov_fini: one directly with pci_driver->remove
and another implicit by calling pci_disable_sriov, which also perform
the VFs remove. This was leading to crashing the kernel on the second
attempt.

Given that pci_disable_sriov already calls to pci remove function, get
rid of the direct call to pci_driver->remove from the driver.

2 different ways to trigger the bug:
- Create one or more VFs, then attach the PF to a virtual machine (at
  least with qemu/KVM)
- Create one or more VFs, then remove the PF with:
  echo 1 > /sys/bus/pci/devices/PF_PCI_ID/remove

Removing sfc module does not trigger the error, at least for me, because
it removes the VF first, and then the PF.

Example of a log with the error:
    list_del corruption, ffff967fd20a8ad0->next is LIST_POISON1 (dead000000000100)
    ------------[ cut here ]------------
    kernel BUG at lib/list_debug.c:47!
    [...trimmed...]
    RIP: 0010:__list_del_entry_valid.cold.1+0x12/0x4c
    [...trimmed...]
    Call Trace:
    efx_dissociate+0x1f/0x140 [sfc]
    efx_pci_remove+0x27/0x150 [sfc]
    pci_device_remove+0x3b/0xc0
    device_release_driver_internal+0x103/0x1f0
    pci_stop_bus_device+0x69/0x90
    pci_stop_and_remove_bus_device+0xe/0x20
    pci_iov_remove_virtfn+0xba/0x120
    sriov_disable+0x2f/0xe0
    efx_ef10_pci_sriov_disable+0x52/0x80 [sfc]
    ? pcie_aer_is_native+0x12/0x40
    efx_ef10_sriov_fini+0x72/0x110 [sfc]
    efx_pci_remove+0x62/0x150 [sfc]
    pci_device_remove+0x3b/0xc0
    device_release_driver_internal+0x103/0x1f0
    unbind_store+0xf6/0x130
    kernfs_fop_write+0x116/0x190
    vfs_write+0xa5/0x1a0
    ksys_write+0x4f/0xb0
    do_syscall_64+0x5b/0x1a0
    entry_SYSCALL_64_after_hwframe+0x65/0xca
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzbot complained in neigh_reduce(), because rcu_read_lock_bh()
is treated differently than rcu_read_lock()

WARNING: suspicious RCU usage
5.13.0-rc6-syzkaller #0 Not tainted
-----------------------------
include/net/addrconf.h:313 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
3 locks held by kworker/0:0/5:
 #0: ffff888011064d38 ((wq_completion)events){+.+.}-{0:0}, at: arch_atomic64_set arch/x86/include/asm/atomic64_64.h:34 [inline]
 #0: ffff888011064d38 ((wq_completion)events){+.+.}-{0:0}, at: atomic64_set include/asm-generic/atomic-instrumented.h:856 [inline]
 #0: ffff888011064d38 ((wq_completion)events){+.+.}-{0:0}, at: atomic_long_set include/asm-generic/atomic-long.h:41 [inline]
 #0: ffff888011064d38 ((wq_completion)events){+.+.}-{0:0}, at: set_work_data kernel/workqueue.c:617 [inline]
 #0: ffff888011064d38 ((wq_completion)events){+.+.}-{0:0}, at: set_work_pool_and_clear_pending kernel/workqueue.c:644 [inline]
 #0: ffff888011064d38 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x871/0x1600 kernel/workqueue.c:2247
 #1: ffffc90000ca7da8 ((work_completion)(&port->wq)){+.+.}-{0:0}, at: process_one_work+0x8a5/0x1600 kernel/workqueue.c:2251
 #2: ffffffff8bf795c0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x1da/0x3130 net/core/dev.c:4180

stack backtrace:
CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.13.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events ipvlan_process_multicast
Call Trace:
 __dump_stack lib/dump_stack.c:79 [inline]
 dump_stack+0x141/0x1d7 lib/dump_stack.c:120
 __in6_dev_get include/net/addrconf.h:313 [inline]
 __in6_dev_get include/net/addrconf.h:311 [inline]
 neigh_reduce drivers/net/vxlan.c:2167 [inline]
 vxlan_xmit+0x34d5/0x4c30 drivers/net/vxlan.c:2919
 __netdev_start_xmit include/linux/netdevice.h:4944 [inline]
 netdev_start_xmit include/linux/netdevice.h:4958 [inline]
 xmit_one net/core/dev.c:3654 [inline]
 dev_hard_start_xmit+0x1eb/0x920 net/core/dev.c:3670
 __dev_queue_xmit+0x2133/0x3130 net/core/dev.c:4246
 ipvlan_process_multicast+0xa99/0xd70 drivers/net/ipvlan/ipvlan_core.c:287
 process_one_work+0x98d/0x1600 kernel/workqueue.c:2276
 worker_thread+0x64c/0x1120 kernel/workqueue.c:2422
 kthread+0x3b1/0x4a0 kernel/kthread.c:313
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294

Fixes: f564f45c ("vxlan: add ipv6 proxy support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nft_table_lookup_byhandle() also needs to validate the netlink PortID
owner when deleting a table by handle.

Fixes: 6001a930 ("netfilter: nftables: introduce table ownership")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

nft_table_lookup() allows us to obtain the table object by the name and
the family. The netlink portID validation needs to be skipped for the
dump path, since the ownership only applies to commands to update the
given table. Skip validation if the specified netlink PortID is zero
when calling nft_table_lookup().

Fixes: 6001a930 ("netfilter: nftables: introduce table ownership")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

In case of xfrm offload, if xdo_dev_state_add() of driver returns
-EOPNOTSUPP, xfrm offload fallback is failed.
In xfrm state_add() both xso->dev and xso->real_dev are initialized to
dev and when err(-EOPNOTSUPP) is returned only xso->dev is set to null.

So in this scenario the condition in func validate_xmit_xfrm(),
if ((x->xso.dev != dev) && (x->xso.real_dev == dev))
                return skb;
returns true, due to which skb is returned without calling esp_xmit()
below which has fallback code. Hence the CRYPTO_FALLBACK is failing.

So fixing this with by keeping x->xso.real_dev as NULL when err is
returned in func xfrm_dev_state_add().

Fixes: bdfd2d1f ("bonding/xfrm: use real_dev instead of slave_dev")
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

If qfq_change_class() is unable to allocate memory for qfq_aggregate,
it frees the class that has been inserted in the class hash table,
but does not unhash it.

Defer the insertion after the problematic allocation.

BUG: KASAN: use-after-free in hlist_add_head include/linux/list.h:884 [inline]
BUG: KASAN: use-after-free in qdisc_class_hash_insert+0x200/0x210 net/sched/sch_api.c:731
Write of size 8 at addr ffff88814a534f10 by task syz-executor.4/31478

CPU: 0 PID: 31478 Comm: syz-executor.4 Not tainted 5.13.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:79 [inline]
 dump_stack+0x141/0x1d7 lib/dump_stack.c:120
 print_address_description.constprop.0.cold+0x5b/0x2f8 mm/kasan/report.c:233
 __kasan_report mm/kasan/report.c:419 [inline]
 kasan_report.cold+0x7c/0xd8 mm/kasan/report.c:436
 hlist_add_head include/linux/list.h:884 [inline]
 qdisc_class_hash_insert+0x200/0x210 net/sched/sch_api.c:731
 qfq_change_class+0x96c/0x1990 net/sched/sch_qfq.c:489
 tc_ctl_tclass+0x514/0xe50 net/sched/sch_api.c:2113
 rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5564
 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504
 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
 netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340
 netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1929
 sock_sendmsg_nosec net/socket.c:654 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:674
 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2350
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2404
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2433
 do_syscall_64+0x3a/0xb0 arch/x86/entry/common.c:47
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x4665d9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fdc7b5f0188 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 000000000056bf80 RCX: 00000000004665d9
RDX: 0000000000000000 RSI: 00000000200001c0 RDI: 0000000000000003
RBP: 00007fdc7b5f01d0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000002
R13: 00007ffcf7310b3f R14: 00007fdc7b5f0300 R15: 0000000000022000

Allocated by task 31445:
 kasan_save_stack+0x1b/0x40 mm/kasan/common.c:38
 kasan_set_track mm/kasan/common.c:46 [inline]
 set_alloc_info mm/kasan/common.c:428 [inline]
 ____kasan_kmalloc mm/kasan/common.c:507 [inline]
 ____kasan_kmalloc mm/kasan/common.c:466 [inline]
 __kasan_kmalloc+0x9b/0xd0 mm/kasan/common.c:516
 kmalloc include/linux/slab.h:556 [inline]
 kzalloc include/linux/slab.h:686 [inline]
 qfq_change_class+0x705/0x1990 net/sched/sch_qfq.c:464
 tc_ctl_tclass+0x514/0xe50 net/sched/sch_api.c:2113
 rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5564
 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504
 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
 netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340
 netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1929
 sock_sendmsg_nosec net/socket.c:654 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:674
 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2350
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2404
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2433
 do_syscall_64+0x3a/0xb0 arch/x86/entry/common.c:47
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Freed by task 31445:
 kasan_save_stack+0x1b/0x40 mm/kasan/common.c:38
 kasan_set_track+0x1c/0x30 mm/kasan/common.c:46
 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:357
 ____kasan_slab_free mm/kasan/common.c:360 [inline]
 ____kasan_slab_free mm/kasan/common.c:325 [inline]
 __kasan_slab_free+0xfb/0x130 mm/kasan/common.c:368
 kasan_slab_free include/linux/kasan.h:212 [inline]
 slab_free_hook mm/slub.c:1583 [inline]
 slab_free_freelist_hook+0xdf/0x240 mm/slub.c:1608
 slab_free mm/slub.c:3168 [inline]
 kfree+0xe5/0x7f0 mm/slub.c:4212
 qfq_change_class+0x10fb/0x1990 net/sched/sch_qfq.c:518
 tc_ctl_tclass+0x514/0xe50 net/sched/sch_api.c:2113
 rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5564
 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504
 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
 netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340
 netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1929
 sock_sendmsg_nosec net/socket.c:654 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:674
 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2350
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2404
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2433
 do_syscall_64+0x3a/0xb0 arch/x86/entry/common.c:47
 entry_SYSCALL_64_after_hwframe+0x44/0xae

The buggy address belongs to the object at ffff88814a534f00
 which belongs to the cache kmalloc-128 of size 128
The buggy address is located 16 bytes inside of
 128-byte region [ffff88814a534f00, ffff88814a534f80)
The buggy address belongs to the page:
page:ffffea0005294d00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x14a534
flags: 0x57ff00000000200(slab|node=1|zone=2|lastcpupid=0x7ff)
raw: 057ff00000000200 ffffea00004fee00 0000000600000006 ffff8880110418c0
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 0, migratetype Unmovable, gfp_mask 0x12cc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY), pid 29797, ts 604817765317, free_ts 604810151744
 prep_new_page mm/page_alloc.c:2358 [inline]
 get_page_from_freelist+0x1033/0x2b60 mm/page_alloc.c:3994
 __alloc_pages+0x1b2/0x500 mm/page_alloc.c:5200
 alloc_pages+0x18c/0x2a0 mm/mempolicy.c:2272
 alloc_slab_page mm/slub.c:1646 [inline]
 allocate_slab+0x2c5/0x4c0 mm/slub.c:1786
 new_slab mm/slub.c:1849 [inline]
 new_slab_objects mm/slub.c:2595 [inline]
 ___slab_alloc+0x4a1/0x810 mm/slub.c:2758
 __slab_alloc.constprop.0+0xa7/0xf0 mm/slub.c:2798
 slab_alloc_node mm/slub.c:2880 [inline]
 slab_alloc mm/slub.c:2922 [inline]
 __kmalloc+0x315/0x330 mm/slub.c:4050
 kmalloc include/linux/slab.h:561 [inline]
 kzalloc include/linux/slab.h:686 [inline]
 __register_sysctl_table+0x112/0x1090 fs/proc/proc_sysctl.c:1318
 mpls_dev_sysctl_register+0x1b7/0x2d0 net/mpls/af_mpls.c:1421
 mpls_add_dev net/mpls/af_mpls.c:1472 [inline]
 mpls_dev_notify+0x214/0x8b0 net/mpls/af_mpls.c:1588
 notifier_call_chain+0xb5/0x200 kernel/notifier.c:83
 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:2121
 call_netdevice_notifiers_extack net/core/dev.c:2133 [inline]
 call_netdevice_notifiers net/core/dev.c:2147 [inline]
 register_netdevice+0x106b/0x1500 net/core/dev.c:10312
 veth_newlink+0x585/0xac0 drivers/net/veth.c:1547
 __rtnl_newlink+0x1062/0x1710 net/core/rtnetlink.c:3452
 rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3500
page last free stack trace:
 reset_page_owner include/linux/page_owner.h:24 [inline]
 free_pages_prepare mm/page_alloc.c:1298 [inline]
 free_pcp_prepare+0x223/0x300 mm/page_alloc.c:1342
 free_unref_page_prepare mm/page_alloc.c:3250 [inline]
 free_unref_page+0x12/0x1d0 mm/page_alloc.c:3298
 __vunmap+0x783/0xb60 mm/vmalloc.c:2566
 free_work+0x58/0x70 mm/vmalloc.c:80
 process_one_work+0x98d/0x1600 kernel/workqueue.c:2276
 worker_thread+0x64c/0x1120 kernel/workqueue.c:2422
 kthread+0x3b1/0x4a0 kernel/kthread.c:313
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294

Memory state around the buggy address:
 ffff88814a534e00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff88814a534e80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88814a534f00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                         ^
 ffff88814a534f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff88814a535000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Fixes: 462dbc91 ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8021q module adds vlan 0 to all interfaces when it starts.
When 8021q module is loaded it isn't possible to create bond
with mv88e6xxx interfaces, bonding module dipslay error
"Couldn't add bond vlan ids", because it tries to add vlan 0
to slave interfaces.

There is unexpected behavior in the switch. When a PVID
is assigned to a port the switch changes VID to PVID
in ingress frames with VID 0 on the port. Expected
that the switch doesn't assign PVID to tagged frames
with VID 0. But there isn't a way to change this behavior
in the switch.

Fixes: 57e661aa ("net: dsa: mv88e6xxx: Link aggregation support")
Signed-off-by: Eldar Gasanov <eldargasanov2@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The client's sk_state will be set to TCP_ESTABLISHED if the server
replay the client's connect request.

However, if the client has pending signal, its sk_state will be set
to TCP_CLOSE without notify the server, so the server will hold the
corrupt connection.

            client                        server

1. sk_state=TCP_SYN_SENT         |
2. call ->connect()              |
3. wait reply                    |
                                 | 4. sk_state=TCP_ESTABLISHED
                                 | 5. insert to connected list
                                 | 6. reply to the client
7. sk_state=TCP_ESTABLISHED      |
8. insert to connected list      |
9. *signal pending* <--------------------- the user kill client
10. sk_state=TCP_CLOSE           |
client is exiting...             |
11. call ->release()             |
     virtio_transport_close
      if (!(sk->sk_state == TCP_ESTABLISHED ||
	      sk->sk_state == TCP_CLOSING))
		return true; *return at here, the server cannot notice the connection is corrupt*

So the client should notify the peer in this case.

Cc: David S. Miller <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jorgen Hansen <jhansen@vmware.com>
Cc: Norbert Slusarek <nslusarek@gmx.net>
Cc: Andra Paraschiv <andraprs@amazon.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: David Brazdil <dbrazdil@google.com>
Cc: Alexander Popov <alex.popov@linux.com>
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lkml.org/lkml/2021/5/17/418Signed-off-by: lixianming <lixianming5@huawei.com>
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If this test fails we must free some resources as in all the other error
handling paths of this function.

Fixes: ca9c54d2 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Zheyu Ma says:

====================
atm: nicstar: fix two bugs about error handling

Zheyu Ma (2):
  atm: nicstar: use 'dma_free_coherent' instead of 'kfree'
  atm: nicstar: register the interrupt handler in the right place
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Because the error handling is sequential, the application of resources
should be carried out in the order of error handling, so the operation
of registering the interrupt handler should be put in front, so as not
to free the unregistered interrupt handler during error handling.

This log reveals it:

[    3.438724] Trying to free already-free IRQ 23
[    3.439060] WARNING: CPU: 5 PID: 1 at kernel/irq/manage.c:1825 free_irq+0xfb/0x480
[    3.440039] Modules linked in:
[    3.440257] CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.12.4-g70e7f0549188-dirty #142
[    3.440793] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[    3.441561] RIP: 0010:free_irq+0xfb/0x480
[    3.441845] Code: 6e 08 74 6f 4d 89 f4 e8 c3 78 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 b4 78 09 00 8b 75 c8 48 c7 c7 a0 ac d5 85 e8 95 d7 f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 87 c5 90 03 48 8b 43 40 4c 8b a0 80
[    3.443121] RSP: 0000:ffffc90000017b50 EFLAGS: 00010086
[    3.443483] RAX: 0000000000000000 RBX: ffff888107c6f000 RCX: 0000000000000000
[    3.443972] RDX: 0000000000000000 RSI: ffffffff8123f301 RDI: 00000000ffffffff
[    3.444462] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000003
[    3.444950] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
[    3.444994] R13: ffff888107dc0000 R14: ffff888104f6bf00 R15: ffff888107c6f0a8
[    3.444994] FS:  0000000000000000(0000) GS:ffff88817bd40000(0000) knlGS:0000000000000000
[    3.444994] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    3.444994] CR2: 0000000000000000 CR3: 000000000642e000 CR4: 00000000000006e0
[    3.444994] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    3.444994] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    3.444994] Call Trace:
[    3.444994]  ns_init_card_error+0x18e/0x250
[    3.444994]  nicstar_init_one+0x10d2/0x1130
[    3.444994]  local_pci_probe+0x4a/0xb0
[    3.444994]  pci_device_probe+0x126/0x1d0
[    3.444994]  ? pci_device_remove+0x100/0x100
[    3.444994]  really_probe+0x27e/0x650
[    3.444994]  driver_probe_device+0x84/0x1d0
[    3.444994]  ? mutex_lock_nested+0x16/0x20
[    3.444994]  device_driver_attach+0x63/0x70
[    3.444994]  __driver_attach+0x117/0x1a0
[    3.444994]  ? device_driver_attach+0x70/0x70
[    3.444994]  bus_for_each_dev+0xb6/0x110
[    3.444994]  ? rdinit_setup+0x40/0x40
[    3.444994]  driver_attach+0x22/0x30
[    3.444994]  bus_add_driver+0x1e6/0x2a0
[    3.444994]  driver_register+0xa4/0x180
[    3.444994]  __pci_register_driver+0x77/0x80
[    3.444994]  ? uPD98402_module_init+0xd/0xd
[    3.444994]  nicstar_init+0x1f/0x75
[    3.444994]  do_one_initcall+0x7a/0x3d0
[    3.444994]  ? rdinit_setup+0x40/0x40
[    3.444994]  ? rcu_read_lock_sched_held+0x4a/0x70
[    3.444994]  kernel_init_freeable+0x2a7/0x2f9
[    3.444994]  ? rest_init+0x2c0/0x2c0
[    3.444994]  kernel_init+0x13/0x180
[    3.444994]  ? rest_init+0x2c0/0x2c0
[    3.444994]  ? rest_init+0x2c0/0x2c0
[    3.444994]  ret_from_fork+0x1f/0x30
[    3.444994] Kernel panic - not syncing: panic_on_warn set ...
[    3.444994] CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.12.4-g70e7f0549188-dirty #142
[    3.444994] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[    3.444994] Call Trace:
[    3.444994]  dump_stack+0xba/0xf5
[    3.444994]  ? free_irq+0xfb/0x480
[    3.444994]  panic+0x155/0x3ed
[    3.444994]  ? __warn+0xed/0x150
[    3.444994]  ? free_irq+0xfb/0x480
[    3.444994]  __warn+0x103/0x150
[    3.444994]  ? free_irq+0xfb/0x480
[    3.444994]  report_bug+0x119/0x1c0
[    3.444994]  handle_bug+0x3b/0x80
[    3.444994]  exc_invalid_op+0x18/0x70
[    3.444994]  asm_exc_invalid_op+0x12/0x20
[    3.444994] RIP: 0010:free_irq+0xfb/0x480
[    3.444994] Code: 6e 08 74 6f 4d 89 f4 e8 c3 78 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 b4 78 09 00 8b 75 c8 48 c7 c7 a0 ac d5 85 e8 95 d7 f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 87 c5 90 03 48 8b 43 40 4c 8b a0 80
[    3.444994] RSP: 0000:ffffc90000017b50 EFLAGS: 00010086
[    3.444994] RAX: 0000000000000000 RBX: ffff888107c6f000 RCX: 0000000000000000
[    3.444994] RDX: 0000000000000000 RSI: ffffffff8123f301 RDI: 00000000ffffffff
[    3.444994] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000003
[    3.444994] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
[    3.444994] R13: ffff888107dc0000 R14: ffff888104f6bf00 R15: ffff888107c6f0a8
[    3.444994]  ? vprintk_func+0x71/0x110
[    3.444994]  ns_init_card_error+0x18e/0x250
[    3.444994]  nicstar_init_one+0x10d2/0x1130
[    3.444994]  local_pci_probe+0x4a/0xb0
[    3.444994]  pci_device_probe+0x126/0x1d0
[    3.444994]  ? pci_device_remove+0x100/0x100
[    3.444994]  really_probe+0x27e/0x650
[    3.444994]  driver_probe_device+0x84/0x1d0
[    3.444994]  ? mutex_lock_nested+0x16/0x20
[    3.444994]  device_driver_attach+0x63/0x70
[    3.444994]  __driver_attach+0x117/0x1a0
[    3.444994]  ? device_driver_attach+0x70/0x70
[    3.444994]  bus_for_each_dev+0xb6/0x110
[    3.444994]  ? rdinit_setup+0x40/0x40
[    3.444994]  driver_attach+0x22/0x30
[    3.444994]  bus_add_driver+0x1e6/0x2a0
[    3.444994]  driver_register+0xa4/0x180
[    3.444994]  __pci_register_driver+0x77/0x80
[    3.444994]  ? uPD98402_module_init+0xd/0xd
[    3.444994]  nicstar_init+0x1f/0x75
[    3.444994]  do_one_initcall+0x7a/0x3d0
[    3.444994]  ? rdinit_setup+0x40/0x40
[    3.444994]  ? rcu_read_lock_sched_held+0x4a/0x70
[    3.444994]  kernel_init_freeable+0x2a7/0x2f9
[    3.444994]  ? rest_init+0x2c0/0x2c0
[    3.444994]  kernel_init+0x13/0x180
[    3.444994]  ? rest_init+0x2c0/0x2c0
[    3.444994]  ? rest_init+0x2c0/0x2c0
[    3.444994]  ret_from_fork+0x1f/0x30
[    3.444994] Dumping ftrace buffer:
[    3.444994]    (ftrace buffer empty)
[    3.444994] Kernel Offset: disabled
[    3.444994] Rebooting in 1 seconds..
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When 'nicstar_init_one' fails, 'ns_init_card_error' will be executed for
error handling, but the correct memory free function should be used,
otherwise it will cause an error. Since 'card->rsq.org' and
'card->tsq.org' are allocated using 'dma_alloc_coherent' function, they
should be freed using 'dma_free_coherent'.

Fix this by using 'dma_free_coherent' instead of 'kfree'

This log reveals it:

[    3.440294] kernel BUG at mm/slub.c:4206!
[    3.441059] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[    3.441430] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.12.4-g70e7f0549188-dirty #141
[    3.441986] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[    3.442780] RIP: 0010:kfree+0x26a/0x300
[    3.443065] Code: e8 3a c3 b9 ff e9 d6 fd ff ff 49 8b 45 00 31 db a9 00 00 01 00 75 4d 49 8b 45 00 a9 00 00 01 00 75 0a 49 8b 45 08 a8 01 75 02 <0f> 0b 89 d9 b8 00 10 00 00 be 06 00 00 00 48 d3 e0 f7 d8 48 63 d0
[    3.443396] RSP: 0000:ffffc90000017b70 EFLAGS: 00010246
[    3.443396] RAX: dead000000000100 RBX: 0000000000000000 RCX: 0000000000000000
[    3.443396] RDX: 0000000000000000 RSI: ffffffff85d3df94 RDI: ffffffff85df38e6
[    3.443396] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000001
[    3.443396] R10: 0000000000000000 R11: 0000000000000001 R12: ffff888107dc0000
[    3.443396] R13: ffffea00001f0100 R14: ffff888101a8bf00 R15: ffff888107dc0160
[    3.443396] FS:  0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000
[    3.443396] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    3.443396] CR2: 0000000000000000 CR3: 000000000642e000 CR4: 00000000000006e0
[    3.443396] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    3.443396] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    3.443396] Call Trace:
[    3.443396]  ns_init_card_error+0x12c/0x220
[    3.443396]  nicstar_init_one+0x10d2/0x1130
[    3.443396]  local_pci_probe+0x4a/0xb0
[    3.443396]  pci_device_probe+0x126/0x1d0
[    3.443396]  ? pci_device_remove+0x100/0x100
[    3.443396]  really_probe+0x27e/0x650
[    3.443396]  driver_probe_device+0x84/0x1d0
[    3.443396]  ? mutex_lock_nested+0x16/0x20
[    3.443396]  device_driver_attach+0x63/0x70
[    3.443396]  __driver_attach+0x117/0x1a0
[    3.443396]  ? device_driver_attach+0x70/0x70
[    3.443396]  bus_for_each_dev+0xb6/0x110
[    3.443396]  ? rdinit_setup+0x40/0x40
[    3.443396]  driver_attach+0x22/0x30
[    3.443396]  bus_add_driver+0x1e6/0x2a0
[    3.443396]  driver_register+0xa4/0x180
[    3.443396]  __pci_register_driver+0x77/0x80
[    3.443396]  ? uPD98402_module_init+0xd/0xd
[    3.443396]  nicstar_init+0x1f/0x75
[    3.443396]  do_one_initcall+0x7a/0x3d0
[    3.443396]  ? rdinit_setup+0x40/0x40
[    3.443396]  ? rcu_read_lock_sched_held+0x4a/0x70
[    3.443396]  kernel_init_freeable+0x2a7/0x2f9
[    3.443396]  ? rest_init+0x2c0/0x2c0
[    3.443396]  kernel_init+0x13/0x180
[    3.443396]  ? rest_init+0x2c0/0x2c0
[    3.443396]  ? rest_init+0x2c0/0x2c0
[    3.443396]  ret_from_fork+0x1f/0x30
[    3.443396] Modules linked in:
[    3.443396] Dumping ftrace buffer:
[    3.443396]    (ftrace buffer empty)
[    3.458593] ---[ end trace 3c6f8f0d8ef59bcd ]---
[    3.458922] RIP: 0010:kfree+0x26a/0x300
[    3.459198] Code: e8 3a c3 b9 ff e9 d6 fd ff ff 49 8b 45 00 31 db a9 00 00 01 00 75 4d 49 8b 45 00 a9 00 00 01 00 75 0a 49 8b 45 08 a8 01 75 02 <0f> 0b 89 d9 b8 00 10 00 00 be 06 00 00 00 48 d3 e0 f7 d8 48 63 d0
[    3.460499] RSP: 0000:ffffc90000017b70 EFLAGS: 00010246
[    3.460870] RAX: dead000000000100 RBX: 0000000000000000 RCX: 0000000000000000
[    3.461371] RDX: 0000000000000000 RSI: ffffffff85d3df94 RDI: ffffffff85df38e6
[    3.461873] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000001
[    3.462372] R10: 0000000000000000 R11: 0000000000000001 R12: ffff888107dc0000
[    3.462871] R13: ffffea00001f0100 R14: ffff888101a8bf00 R15: ffff888107dc0160
[    3.463368] FS:  0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000
[    3.463949] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    3.464356] CR2: 0000000000000000 CR3: 000000000642e000 CR4: 00000000000006e0
[    3.464856] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    3.465356] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    3.465860] Kernel panic - not syncing: Fatal exception
[    3.466370] Dumping ftrace buffer:
[    3.466616]    (ftrace buffer empty)
[    3.466871] Kernel Offset: disabled
[    3.467122] Rebooting in 1 seconds..
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mat Martineau says:

====================
mptcp: 32-bit sequence number improvements

MPTCP-level sequence numbers are 64 bits, but RFC 8684 allows use of
32-bit sequence numbers in the DSS option to save header space. Those
32-bit numbers are the least significant bits of the full 64-bit
sequence number, so the receiver must infer the correct upper 32 bits.

These two patches improve the logic for determining the full 64-bit
sequence numbers when the 32-bit truncated version has wrapped around.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The current implementation of 32 bit DSN expansion is buggy.
After the previous patch, we can simply reuse the newly
introduced helper to do the expansion safely.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/120
Fixes: 648ef4b8 ("mptcp: Implement MPTCP receive path")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When receiving 32 bits DSS ack from the peer, the MPTCP need
to expand them to 64 bits value. The current code is buggy
WRT detecting 32 bits ack wrap-around: when the wrap-around
happens the current unsigned 32 bit ack value is lower than
the previous one.

Additionally check for possible reverse wrap and make the helper
visible, so that we could re-use it for the next patch.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/204
Fixes: cc9d2566 ("mptcp: update per unacked sequence on pkt reception")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The VLAN transfer logic should actually check for
FLOW_DISSECTOR_KEY_BASIC, not FLOW_DISSECTOR_KEY_CONTROL. Moreover, do
not fallback to case 2) .n_proto is set to 802.1q or 802.1ad, if
FLOW_DISSECTOR_KEY_BASIC is unset.

Fixes: 783003f3 ("netfilter: nftables_offload: special ethertype handling for VLAN")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Release flow from the abort path, this is easy to reproduce since
b72920f6 ("netfilter: nftables: counter hardware offload support").
If the preparation phase fails, then the abort path is exercised without
releasing the flow rule object.

unreferenced object 0xffff8881f0fa7700 (size 128):
  comm "nft", pid 1335, jiffies 4294931120 (age 4163.740s)
  hex dump (first 32 bytes):
    08 e4 de 13 82 88 ff ff 98 e4 de 13 82 88 ff ff  ................
    48 e4 de 13 82 88 ff ff 01 00 00 00 00 00 00 00  H...............
  backtrace:
    [<00000000634547e7>] flow_rule_alloc+0x26/0x80
    [<00000000c8426156>] nft_flow_rule_create+0xc9/0x3f0 [nf_tables]
    [<0000000075ff8e46>] nf_tables_newrule+0xc79/0x10a0 [nf_tables]
    [<00000000ba65e40e>] nfnetlink_rcv_batch+0xaac/0xf90 [nfnetlink]
    [<00000000505c614a>] nfnetlink_rcv+0x1bb/0x1f0 [nfnetlink]
    [<00000000eb78e1fe>] netlink_unicast+0x34b/0x480
    [<00000000a8f72c94>] netlink_sendmsg+0x3af/0x690
    [<000000009cb1ddf4>] sock_sendmsg+0x96/0xa0
    [<0000000039d06e44>] ____sys_sendmsg+0x3fe/0x440
    [<00000000137e82ca>] ___sys_sendmsg+0xd8/0x140
    [<000000000c6bf6a6>] __sys_sendmsg+0xb3/0x130
    [<0000000043bd6268>] do_syscall_64+0x40/0xb0
    [<00000000afdebc2d>] entry_SYSCALL_64_after_hwframe+0x44/0xae

Remove flow rule release from the offload commit path, otherwise error
from the offload commit phase might trigger a double-free due to the
execution of the abort_offload -> abort. After this patch, the abort
path takes care of releasing the flow rule.

This fix also needs to move the nft_flow_rule_create() call before the
transaction object is added otherwise the abort path might find a NULL
pointer to the flow rule object for the NFT_CHAIN_HW_OFFLOAD case.

While at it, rename BASIC-like goto tags to slightly more meaningful
names rather than adding a new "err3" tag.

Fixes: 63b48c73 ("netfilter: nf_tables_offload: undo updates if transaction fails")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

We got multiple reports that multi_chunk_sendfile test
case from tls selftest fails. This was sort of expected,
as the original fix was never applied (see it in the first
Link:). The test in question uses sendfile() with count
larger than the size of the underlying file. This will
make splice set MSG_MORE on all sendpage calls, meaning
TLS will never close and flush the last partial record.

Eric seem to have addressed a similar problem in
commit 35f9c09f ("tcp: tcp_sendpages() should call tcp_push() once")
by introducing MSG_SENDPAGE_NOTLAST. Unlike MSG_MORE
MSG_SENDPAGE_NOTLAST is not set on the last call
of a "pipefull" of data (PIPE_DEF_BUFFERS == 16,
so every 16 pages or whenever we run out of data).

Having a break every 16 pages should be fine, TLS
can pack exactly 4 pages into a record, so for
aligned reads there should be no difference,
unaligned may see one extra record per sendpage().

Sticking to TCP semantics seems preferable to modifying
splice, but we can revisit it if real life scenarios
show a regression.
Reported-by: Vadim Fedorenko <vfedorenko@novek.ru>
Reported-by: Seth Forshee <seth.forshee@canonical.com>
Link: https://lore.kernel.org/netdev/1591392508-14592-1-git-send-email-pooja.trivedi@stackpath.com/
Fixes: 3c4d7559 ("tls: kernel TLS support")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tested-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'linux-can-fixes-for-5.13-20210619' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2021-06-19

this is a pull request of 5 patches for net/master.

The first patch is by Thadeu Lima de Souza Cascardo and fixes a
potential use-after-free in the CAN broadcast manager socket, by
delaying the release of struct bcm_op after synchronize_rcu().

Oliver Hartkopp's patch fixes a similar potential user-after-free in
the CAN gateway socket by synchronizing RCU operations before removing
gw job entry.

Another patch by Oliver Hartkopp fixes a potential use-after-free in
the ISOTP socket by omitting unintended hrtimer restarts on socket
release.

Oleksij Rempel's patch for the j1939 socket fixes a potential
use-after-free by setting the SOCK_RCU_FREE flag on the socket.

The last patch is by Pavel Skripkin and fixes a use-after-free in the
ems_usb CAN driver.

All patches are intended for stable and have stable@v.k.o on Cc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-2021-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for v5.13

Only one important fix for an mwifiex regression.

mwifiex

* fix deadlock during rmmod or firmware reset, regression from
  cfg80211 RTNL changes in v5.12-rc1
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Set needed_headroom according to VF if VF needs a bigger
headroom.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The preempt disable around do_xdp_generic() has been introduced in
commit
   bbbe211c ("net: rcu lock and preempt disable missing around generic xdp")

For BPF it is enough to use migrate_disable() and the code was updated
as it can be seen in commit
   3c58482a ("bpf: Provide bpf_prog_run_pin_on_cpu() helper")

This is a leftover which was not converted.

Use migrate_disable() before invoking do_xdp_generic().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The spin_trylock() was assumed to contain the implicit
barrier needed to ensure the correct ordering between
STATE_MISSED setting/clearing and STATE_MISSED checking
in commit a90c57f2 ("net: sched: fix packet stuck
problem for lockless qdisc").

But it turns out that spin_trylock() only has load-acquire
semantic, for strongly-ordered system(like x86), the compiler
barrier implicitly contained in spin_trylock() seems enough
to ensure the correct ordering. But for weakly-orderly system
(like arm64), the store-release semantic is needed to ensure
the correct ordering as clear_bit() and test_bit() is store
operation, see queued_spin_lock().

So add the explicit barrier to ensure the correct ordering
for the above case.

Fixes: a90c57f2 ("net: sched: fix packet stuck problem for lockless qdisc")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Non-ND strict packets with a source LLA go through the packet taps
again, while non-ND strict packets with other source addresses do not,
and we can see a clone of those packets on the vrf interface (we should
not). This is due to a series of changes:

Commit 6f12fa77[1] made non-ND strict packets not being pushed again
in the packet taps. This changed with commit 205704c6[2] for those
packets having a source LLA, as they need a lookup with the orig_iif.

The issue now is those packets do not skip the 'vrf_ip6_rcv' function to
the end (as the ones without a source LLA) and go through the check to
call packet taps again. This check was changed by commit 6f12fa77[1]
and do not exclude non-strict packets anymore. Packets matching
'need_strict && !is_ndisc && is_ll_src' are now being sent through the
packet taps again. This can be seen by dumping packets on the vrf
interface.

Fix this by having the same code path for all non-ND strict packets and
selectively lookup with the orig_iif for those with a source LLA. This
has the effect to revert to the pre-205704c6[2] condition, which
should also be easier to maintain.

[1] 6f12fa77 ("vrf: mark skb for multicast or link-local as enslaved to VRF")
[2] 205704c6 ("vrf: packets with lladdr src needs dst at input with orig_iif when needs strict")

Fixes: 205704c6 ("vrf: packets with lladdr src needs dst at input with orig_iif when needs strict")
Cc: Stephen Suryaputra <ssuryaextr@gmail.com>
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

In ems_usb_disconnect() dev pointer, which is netdev private data, is
used after free_candev() call:
| 	if (dev) {
| 		unregister_netdev(dev->netdev);
| 		free_candev(dev->netdev);
|
| 		unlink_all_urbs(dev);
|
| 		usb_free_urb(dev->intr_urb);
|
| 		kfree(dev->intr_in_buffer);
| 		kfree(dev->tx_msg_buffer);
| 	}

Fix it by simply moving free_candev() at the end of the block.

Fail log:
| BUG: KASAN: use-after-free in ems_usb_disconnect
| Read of size 8 at addr ffff88804e041008 by task kworker/1:2/2895
|
| CPU: 1 PID: 2895 Comm: kworker/1:2 Not tainted 5.13.0-rc5+ #164
| Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a-rebuilt.opensuse.4
| Workqueue: usb_hub_wq hub_event
| Call Trace:
|     dump_stack (lib/dump_stack.c:122)
|     print_address_description.constprop.0.cold (mm/kasan/report.c:234)
|     kasan_report.cold (mm/kasan/report.c:420 mm/kasan/report.c:436)
|     ems_usb_disconnect (drivers/net/can/usb/ems_usb.c:683 drivers/net/can/usb/ems_usb.c:1058)

Fixes: 702171ad ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface")
Link: https://lore.kernel.org/r/20210617185130.5834-1-paskripkin@gmail.com
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Set SOCK_RCU_FREE to let RCU to call sk_destruct() on completion.
Without this patch, we will run in to j1939_can_recv() after priv was
freed by j1939_sk_release()->j1939_sk_sock_destruct()

Fixes: 25fe97cb ("can: j1939: move j1939_priv_put() into sk_destruct callback")
Link: https://lore.kernel.org/r/20210617130623.12705-1-o.rempel@pengutronix.de
Cc: linux-stable <stable@vger.kernel.org>
Reported-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Reported-by: syzbot+bdf710cfc41c186fdff3@syzkaller.appspotmail.com
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>