- 10 Feb, 2022 15 commits
-
-
Jakub Kicinski authored
Add ability to send delayed packets. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Test if setting SO_MARK with setsockopt works and if cmsg takes precedence over it. Signed-off-by:
-
Jakub Kicinski authored
Use new capabilities of cmsg_sender to test ICMP and RAW sockets, previously only UDP was tested. Before SO_MARK support was added to ICMPv6: # ./cmsg_so_mark.sh Case ICMP rejection returned 0, expected 1 FAIL - 1/12 cases failed After: # ./cmsg_so_mark.sh OK Signed-off-by:
-
Jakub Kicinski authored
Support sending fake ICMP(v6) messages and UDP via RAW sockets. Signed-off-by:
-
Jakub Kicinski authored
Parametrize the code so that it can support UDP and ICMP sockets in the future, and more cmsg types. Signed-off-by:
-
Jakub Kicinski authored
Rename the file in prep for generalization. Signed-off-by:
-
Jakub Kicinski authored
Minor reordering of the code and a call to sock_cmsg_send() gives us support for setting the common socket options via cmsg (the usual ones - SO_MARK, SO_TIMESTAMPING_OLD, SCM_TXTIME). Signed-off-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
Jakub Kicinski authored
Nothing prevents the user from requesting timestamping on ping6 sockets, yet timestamps are not going to be reported. Plumb the flags through. Signed-off-by:
-
Jakub Kicinski authored
We have ftrace and BPF today, there's no need for printing arguments at the start of a function. Signed-off-by:
-
David S. Miller authored
Merge tag 'ieee802154-for-davem-2022-02-10' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan-next Stefan Schmidt says: ==================== pull-request: ieee802154-next 2022-02-10 An update from ieee802154 for your *net-next* tree. There is more ongoing in ieee802154 than usual. This will be the first pull request for this cycle, but I expect one more. Depending on review and rework times. Pavel Skripkin ported the atusb driver over to the new USB api to avoid unint problems as well as making use of the modern api without kmalloc() needs in he driver. Miquel Raynal landed some changes to ensure proper frame checksum checking with hwsim, documenting our use of wake and stop_queue and eliding a magic value by using the proper define. David Girault documented the address struct used in ieee802154. ==================== Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueDavid S. Miller authored
Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2022-02-09 This series contains updates to ice driver only. Brett adds support for QinQ. This begins with code refactoring and re-organization of VLAN configuration functions to allow for introduction of VSI VLAN ops to enable setting and calling of respective operations based on device support of single or double VLANs. Implementations are added for outer VLAN support. To support QinQ, the device must be set to double VLAN mode (DVM). In order for this to occur, the DDP package and NVM must also support DVM. Functions to determine compatibility and properly configure the device are added as well as setting the proper bits to advertise and utilize the proper offloads. Support for VIRTCHNL_VF_OFFLOAD_VLAN_V2 is also included to allow for VF to negotiate and utilize this functionality. ==================== Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-nextJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next 1) Conntrack sets on CHECKSUM_UNNECESSARY for UDP packet with no checksum, from Kevin Mitchell. 2) skb->priority support for nfqueue, from Nicolas Dichtel. 3) Remove conntrack extension register API, from Florian Westphal. 4) Move nat destroy hook to nf_nat_hook instead, to remove nf_ct_ext_destroy(), also from Florian. 5) Wrap pptp conntrack NAT hooks into single structure, from Florian Westphal. 6) Support for tcp option set to noop for nf_tables, also from Florian. 7) Do not run x_tables comment match from packet path in nf_tables, from Florian Westphal. 8) Replace spinlock by cmpxchg() loop to update missed ct event, from Florian Westphal. 9) Wrap cttimeout hooks into single structure, from Florian. 10) Add fast nft_cmp expression for up to 16-bytes. 11) Use cb->ctx to store context in ctnetlink dump, instead of using cb->args[], from Florian Westphal. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: ctnetlink: use dump structure instead of raw args nfqueue: enable to set skb->priority netfilter: nft_cmp: optimize comparison for 16-bytes netfilter: cttimeout: use option structure netfilter: ecache: don't use nf_conn spinlock netfilter: nft_compat: suppress comment match netfilter: exthdr: add support for tcp option removal netfilter: conntrack: pptp: use single option structure netfilter: conntrack: remove extension register api netfilter: conntrack: handle ->destroy hook via nat_ops instead netfilter: conntrack: move extension sizes into core netfilter: conntrack: make all extensions 8-byte alignned netfilter: nfqueue: enable to get skb->priority netfilter: conntrack: mark UDP zero checksum as CHECKSUM_UNNECESSARY ==================== Link: https://lore.kernel.org/r/20220209133616.165104-1-pablo@netfilter.orgSigned-off-by: -
Sebastian Andrzej Siewior authored
Commit 9652dc2e ("tcp: relax listening_hash operations") removed the need to disable bottom half while acquiring listening_hash.lock. There are still two callers left which disable bottom half before the lock is acquired. On PREEMPT_RT the softirqs are preemptible and local_bh_disable() acts as a lock to ensure that resources, that are protected by disabling bottom halves, remain protected. This leads to a circular locking dependency if the lock acquired with disabled bottom halves is also acquired with enabled bottom halves followed by disabling bottom halves. This is the reverse locking order. It has been observed with inet_listen_hashbucket::lock: local_bh_disable() + spin_lock(&ilb->lock): inet_listen() inet_csk_listen_start() sk->sk_prot->hash() := inet_hash() local_bh_disable() __inet_hash() spin_lock(&ilb->lock); acquire(&ilb->lock); Reverse order: spin_lock(&ilb2->lock) + local_bh_disable(): tcp_seq_next() listening_get_next() spin_lock(&ilb2->lock); acquire(&ilb2->lock); tcp4_seq_show() get_tcp4_sock() sock_i_ino() read_lock_bh(&sk->sk_callback_lock); acquire(softirq_ctrl) // <---- whoops acquire(&sk->sk_callback_lock) Drop local_bh_disable() around __inet_hash() which acquires listening_hash->lock. Split inet_unhash() and acquire the listen_hashbucket lock without disabling bottom halves; the inet_ehash lock with disabled bottom halves. Reported-by:
Mike Galbraith <efault@gmx.de> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lkml.kernel.org/r/12d6f9879a97cd56c09fb53dee343cbb14f7f1f7.camel@gmx.de Link: https://lkml.kernel.org/r/X9CheYjuXWc75Spa@hirez.programming.kicks-ass.net Link: https://lore.kernel.org/r/YgQOebeZ10eNx1W6@linutronix.deSigned-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2022-02-09 We've added 126 non-merge commits during the last 16 day(s) which contain a total of 201 files changed, 4049 insertions(+), 2215 deletions(-). The main changes are: 1) Add custom BPF allocator for JITs that pack multiple programs into a huge page to reduce iTLB pressure, from Song Liu. 2) Add __user tagging support in vmlinux BTF and utilize it from BPF verifier when generating loads, from Yonghong Song. 3) Add per-socket fast path check guarding from cgroup/BPF overhead when used by only some sockets, from Pavel Begunkov. 4) Continued libbpf deprecation work of APIs/features and removal of their usage from samples, selftests, libbpf & bpftool, from Andrii Nakryiko and various others. 5) Improve BPF instruction set documentation by adding byte swap instructions and cleaning up load/store section, from Christoph Hellwig. 6) Switch BPF preload infra to light skeleton and remove libbpf dependency from it, from Alexei Starovoitov. 7) Fix architecture-agnostic macros in libbpf for accessing syscall arguments from BPF progs for non-x86 architectures, from Ilya Leoshkevich. 8) Rework port members in struct bpf_sk_lookup and struct bpf_sock to be of 16-bit field with anonymous zero padding, from Jakub Sitnicki. 9) Add new bpf_copy_from_user_task() helper to read memory from a different task than current. Add ability to create sleepable BPF iterator progs, from Kenny Yu. 10) Implement XSK batching for ice's zero-copy driver used by AF_XDP and utilize TX batching API from XSK buffer pool, from Maciej Fijalkowski. 11) Generate temporary netns names for BPF selftests to avoid naming collisions, from Hangbin Liu. 12) Implement bpf_core_types_are_compat() with limited recursion for in-kernel usage, from Matteo Croce. 13) Simplify pahole version detection and finally enable CONFIG_DEBUG_INFO_DWARF5 to be selected with CONFIG_DEBUG_INFO_BTF, from Nathan Chancellor. 14) Misc minor fixes to libbpf and selftests from various folks. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (126 commits) selftests/bpf: Cover 4-byte load from remote_port in bpf_sk_lookup bpf: Make remote_port field in struct bpf_sk_lookup 16-bit wide libbpf: Fix compilation warning due to mismatched printf format selftests/bpf: Test BPF_KPROBE_SYSCALL macro libbpf: Add BPF_KPROBE_SYSCALL macro libbpf: Fix accessing the first syscall argument on s390 libbpf: Fix accessing the first syscall argument on arm64 libbpf: Allow overriding PT_REGS_PARM1{_CORE}_SYSCALL selftests/bpf: Skip test_bpf_syscall_macro's syscall_arg1 on arm64 and s390 libbpf: Fix accessing syscall arguments on riscv libbpf: Fix riscv register names libbpf: Fix accessing syscall arguments on powerpc selftests/bpf: Use PT_REGS_SYSCALL_REGS in bpf_syscall_macro libbpf: Add PT_REGS_SYSCALL_REGS macro selftests/bpf: Fix an endianness issue in bpf_syscall_macro test bpf: Fix bpf_prog_pack build HPAGE_PMD_SIZE bpf: Fix leftover header->pages in sparc and powerpc code. libbpf: Fix signedness bug in btf_dump_array_data() selftests/bpf: Do not export subtest as standalone test bpf, x86_64: Fail gracefully on bpf_jit_binary_pack_finalize failures ... ==================== Link: https://lore.kernel.org/r/20220209210050.8425-1-daniel@iogearbox.netSigned-off-by: -
Menglong Dong authored
In the commit c504e5c2 ("net: skb: introduce kfree_skb_reason()") drop reason is introduced to the tracepoint of kfree_skb. Therefore, drop_monitor is able to report the drop reason to users by netlink. The drop reasons are reported as string to users, which is exactly the same as what we do when reporting it to ftrace. Signed-off-by:
Menglong Dong <imagedong@tencent.com> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
-
- 09 Feb, 2022 25 commits
-
-
Alexei Starovoitov authored
Jakub Sitnicki says: ==================== Following the recent split-up of the bpf_sock dst_port field, apply the same to technique to the bpf_sk_lookup remote_port field to make uAPI more user friendly. v1 -> v2: - Remove remote_port range check and cast to be16 in TEST_RUN for sk_lookup (kernel test robot) ==================== Signed-off-by:Alexei Starovoitov <ast@kernel.org>
-
Jakub Sitnicki authored
Extend the context access tests for sk_lookup prog to cover the surprising case of a 4-byte load from the remote_port field, where the expected value is actually shifted by 16 bits. Signed-off-by:
Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by:
Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20220209184333.654927-3-jakub@cloudflare.com
-
Jakub Sitnicki authored
remote_port is another case of a BPF context field documented as a 32-bit value in network byte order for which the BPF context access converter generates a load of a zero-padded 16-bit integer in network byte order. First such case was dst_port in bpf_sock which got addressed in commit 4421a582 ("bpf: Make dst_port field in struct bpf_sock 16-bit wide"). Loading 4-bytes from the remote_port offset and converting the value with bpf_ntohl() leads to surprising results, as the expected value is shifted by 16 bits. Reduce the confusion by splitting the field in two - a 16-bit field holding a big-endian integer, and a 16-bit zero-padding anonymous field that follows it. Suggested-by:
-
Brett Creeley authored
VFs by default are able to see all tagged traffic regardless of trust and VLAN filters. Based on legacy devices (i.e. ixgbe, i40e), customers expect VFs to receive all VLAN tagged traffic with a matching destination MAC. Add an ethtool private flag 'vf-vlan-pruning' and set the default to off so VFs will receive all VLAN traffic directed towards them. When the flag is turned on, VF will only be able to receive untagged traffic or traffic with VLAN tags it has created interfaces for. Also, the flag cannot be changed while any VFs are allocated. This was done to simplify the implementation. So, if this flag is needed, then the PF admin must enable it. If the user tries to enable the flag while VFs are active, then print an unsupported message with the vf-vlan-pruning flag included. In case multiple flags were specified, this makes it clear to the user which flag failed. Signed-off-by:
Brett Creeley <brett.creeley@intel.com> Tested-by:
Gurucharan G <gurucharanx.g@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Brett Creeley authored
Currently there is only support for 802.1Q port VLANs on SR-IOV VFs. Add support to also allow 802.1ad port VLANs when double VLAN mode is enabled. Signed-off-by:
Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by:
-
Brett Creeley authored
In order for the driver to support 802.1ad VLAN filtering and offloads, it needs to advertise those VLAN features and also support modifying those VLAN features, so make the necessary changes to ice_set_netdev_features(). By default, enable CTAG insertion/stripping and CTAG filtering for both Single and Double VLAN Modes (SVM/DVM). Also, in DVM, enable STAG filtering by default. This is done by setting the feature bits in netdev->features. Also, in DVM, support toggling of STAG insertion/stripping, but don't enable them by default. This is done by setting the feature bits in netdev->hw_features. Since 802.1ad VLAN filtering and offloads are only supported in DVM, make sure they are not enabled by default and that they cannot be enabled during runtime, when the device is in SVM. Add an implementation for the ndo_fix_features() callback. This is needed since the hardware cannot support multiple VLAN ethertypes for VLAN insertion/stripping simultaneously and all supported VLAN filtering must either be enabled or disabled together. Disable inner VLAN stripping by default when DVM is enabled. If a VSI supports stripping the inner VLAN in DVM, then it will have to configure that during runtime. For example if a VF is configured in a port VLAN while DVM is enabled it will be allowed to offload inner VLANs. Signed-off-by:
-
Brett Creeley authored
In order to support configuring the device in Double VLAN Mode (DVM), the DDP and FW have to support DVM. If both support DVM, the PF that downloads the package needs to update the default recipes, set the VLAN mode, and update boost TCAM entries. To support updating the default recipes in DVM, add support for updating an existing switch recipe's lkup_idx and mask. This is done by first calling the get recipe AQ (0x0292) with the desired recipe ID. Then, if that is successful update one of the lookup indices (lkup_idx) and its associated mask if the mask is valid otherwise the already existing mask will be used. The VLAN mode of the device has to be configured while the global configuration lock is held while downloading the DDP, specifically after the DDP has been downloaded. If supported, the device will default to DVM. Co-developed-by:
Dan Nowlin <dan.nowlin@intel.com> Signed-off-by:
-
Brett Creeley authored
Add support for the VF driver to be able to request VIRTCHNL_VF_OFFLOAD_VLAN_V2, negotiate its VLAN capabilities via VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS, add/delete VLAN filters, and enable/disable VLAN offloads. VFs supporting VIRTCHNL_OFFLOAD_VLAN_V2 will be able to use the following virtchnl opcodes: VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS VIRTCHNL_OP_ADD_VLAN_V2 VIRTCHNL_OP_DEL_VLAN_V2 VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2 VIRTCHNL_OP_ENABLE_VLAN_INSERTION_V2 VIRTCHNL_OP_DISABLE_VLAN_INSERTION_V2 Legacy VF drivers may expect the initial VLAN stripping settings to be configured by the PF, so the PF initializes VLAN stripping based on the VIRTCHNL_OP_GET_VF_RESOURCES opcode. However, with VLAN support via VIRTCHNL_VF_OFFLOAD_VLAN_V2, this function is only expected to be used for VFs that only support VIRTCHNL_VF_OFFLOAD_VLAN, which will only be supported when a port VLAN is configured. Update the function based on the new expectations. Also, change the message when the PF can't enable/disable VLAN stripping to a dev_dbg() as this isn't fatal. When a VF isn't in a port VLAN and it only supports VIRTCHNL_VF_OFFLOAD_VLAN when Double VLAN Mode (DVM) is enabled, then the PF needs to reject the VIRTCHNL_VF_OFFLOAD_VLAN capability and configure the VF in software only VLAN mode. To do this add the new function ice_vf_vsi_cfg_legacy_vlan_mode(), which updates the VF's inner and outer ice_vsi_vlan_ops functions and sets up software only VLAN mode. Signed-off-by:
-
Brett Creeley authored
Currently the driver only supports 802.1Q VLAN insertion and stripping. However, once Double VLAN Mode (DVM) is fully supported, then both 802.1Q and 802.1ad VLAN insertion and stripping will be supported. Unfortunately the VSI context parameters only allow for one VLAN ethertype at a time for VLAN offloads so only one or the other VLAN ethertype offload can be supported at once. To support this, multiple changes are needed. Rx path changes: [1] In DVM, the Rx queue context l2tagsel field needs to be cleared so the outermost tag shows up in the l2tag2_2nd field of the Rx flex descriptor. In Single VLAN Mode (SVM), the l2tagsel field should remain 1 to support SVM configurations. [2] Modify the ice_test_staterr() function to take a __le16 instead of the ice_32b_rx_flex_desc union pointer so this function can be used for both rx_desc->wb.status_error0 and rx_desc->wb.status_error1. [3] Add the new inline function ice_get_vlan_tag_from_rx_desc() that checks if there is a VLAN tag in l2tag1 or l2tag2_2nd. [4] In ice_receive_skb(), add a check to see if NETIF_F_HW_VLAN_STAG_RX is enabled in netdev->features. If it is, then this is the VLAN ethertype that needs to be added to the stripping VLAN tag. Since ice_fix_features() prevents CTAG_RX and STAG_RX from being enabled simultaneously, the VLAN ethertype will only ever be 802.1Q or 802.1ad. Tx path changes: [1] In DVM, the VLAN tag needs to be placed in the l2tag2 field of the Tx context descriptor. The new define ICE_TX_FLAGS_HW_OUTER_SINGLE_VLAN was added to the list of tx_flags to handle this case. [2] When the stack requests the VLAN tag to be offloaded on Tx, the driver needs to set either ICE_TX_FLAGS_HW_OUTER_SINGLE_VLAN or ICE_TX_FLAGS_HW_VLAN, so the tag is inserted in l2tag2 or l2tag1 respectively. To determine which location to use, set a bit in the Tx ring flags field during ring allocation that can be used to determine which field to use in the Tx descriptor. In DVM, always use l2tag2, and in SVM, always use l2tag1. Signed-off-by:
-
Brett Creeley authored
Add a new outer_vlan_ops member to the ice_vsi structure as outer VLAN ops are only available when the device is in Double VLAN Mode (DVM). Depending on the VSI type, the requirements for what operations to use/allow differ. By default all VSI's have unsupported inner and outer VSI VLAN ops. This implementation was chosen to prevent unexpected crashes due to null pointer dereferences. Instead, if a VSI calls an unsupported op, it will just return -EOPNOTSUPP. Add implementations to support modifying outer VLAN fields for VSI context. This includes the ability to modify VLAN stripping, insertion, and the port VLAN based on the outer VLAN handling fields of the VSI context. These functions should only ever be used if DVM is enabled because that means the firmware supports the outer VLAN fields in the VSI context. If the device is in DVM, then always use the outer_vlan_ops, else use the vlan_ops since the device is in Single VLAN Mode (SVM). Also, move adding the untagged VLAN 0 filter from ice_vsi_setup() to ice_vsi_vlan_setup() as the latter function is specific to the PF and all other VSI types that need an untagged VLAN 0 filter already do this in their specific flows. Without this change, Flow Director is failing to initialize because it does not implement any VSI VLAN ops. Signed-off-by:
-
Brett Creeley authored
Current operations act on inner VLAN fields. To support double VLAN, outer VLAN operations and functions will be implemented. Add the "inner" naming to existing VLAN operations to distinguish them from the upcoming outer values and functions. Some spacing adjustments are made to align values. Note that the inner is not talking about a tunneled VLAN, but the second VLAN in the packet. For SVM the driver uses inner or single VLAN filtering and offloads and in Double VLAN Mode the driver uses the inner filtering and offloads for SR-IOV VFs in port VLANs in order to support offloading the guest VLAN while a port VLAN is configured. Signed-off-by:
-
Brett Creeley authored
Currently the proto argument is unused. This is because the driver only supports 802.1Q VLAN filtering. This policy is enforced via netdev features that the driver sets up when configuring the netdev, so the proto argument won't ever be anything other than 802.1Q. However, this will allow for future iterations of the driver to seemlessly support 802.1ad filtering. Begin using the proto argument and extend the related structures to support its use. Signed-off-by:
-
Brett Creeley authored
The current vf->port_vlan_info variable is a packed u16 that contains the port VLAN ID and QoS/prio value. This is fine, but changes are incoming that allow for an 802.1ad port VLAN. Add flexibility by changing the vf->port_vlan_info member to be an ice_vlan structure. Signed-off-by:
-
Brett Creeley authored
Add a new struct for VLAN related information. Currently this holds VLAN ID and priority values, but will be expanded to hold TPID value. This reduces the changes necessary if any other values are added in future. Remove the action argument from these calls as it's always ICE_FWD_VSI. Signed-off-by:
-
Brett Creeley authored
Incoming changes to support 802.1Q and/or 802.1ad VLAN filtering and offloads require more flexibility when configuring VLANs. The VSI VLAN interface will allow flexibility for configuring VLANs for all VSI types. Add new files to separate the VSI VLAN ops and move functions to make the code more organized. Signed-off-by:
-
Brett Creeley authored
There are multiple places where VLAN 0 is being added. Create a function to be called in order to minimize changes as the implementation is expanded to support double VLAN and avoid duplicated code. Signed-off-by:
-
Brett Creeley authored
Add functions to configure Tx VLAN antispoof based on iproute configuration and/or VLAN mode and VF driver support. This is needed later so the driver can control when it can be configured. Also, add functions that can be used to enable and disable MAC and VLAN spoofcheck. Move spoofchk configuration during VSI setup into the SR-IOV initialization path and into the post VSI rebuild flow for VF VSIs. Signed-off-by:
-
Andrii Nakryiko authored
On ppc64le architecture __s64 is long int and requires %ld. Cast to ssize_t and use %zd to avoid architecture-specific specifiers. Fixes: 4172843e ("libbpf: Fix signedness bug in btf_dump_array_data()") Signed-off-by:
Andrii Nakryiko <andrii@kernel.org> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220209063909.1268319-1-andrii@kernel.org
-
Oleksij Rempel authored
Provide generic selftest support. Tested with LAN9500 and LAN9512. Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by:
-
Wang Qing authored
do_div() does a 64-by-32 division. When the divisor is u64, do_div() truncates it to 32 bits, this means it can test non-zero and be truncated to zero for division. fix do_div.cocci warning: do_div() does a 64-by-32 division, please consider using div64_u64 instead. Signed-off-by:
Wang Qing <wangqing@vivo.com> Signed-off-by:
-
Po Liu authored
Now we can use the enetc_cbd_alloc_data_mem() to replace complicated DMA data alloc method and CBDR memory basic seting. Signed-off-by:
Po Liu <po.liu@nxp.com> Signed-off-by:
-
Po Liu authored
Separate the CBDR data memory alloc standalone. It is convenient for other part loading, for example the ENETC QOS part. Reported-and-suggested-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Po Liu authored
To replace the dma_map_single() stream DMA mapping with DMA coherent method dma_alloc_coherent() which is more simple. dma_map_single() found by Tim Gardner not proper. Suggested by Claudiu Manoil and Jakub Kicinski to use dma_alloc_coherent(). Discussion at: https://lore.kernel.org/netdev/AM9PR04MB8397F300DECD3C44D2EBD07796BD9@AM9PR04MB8397.eurprd04.prod.outlook.com/t/ Fixes: 888ae5a3 ("net: enetc: add tc flower psfp offload driver") cc: Claudiu Manoil <claudiu.manoil@nxp.com> Reported-by:
Tim Gardner <tim.gardner@canonical.com> Signed-off-by:
-
David S. Miller authored
Ioana Ciornei says: ==================== dpaa2-eth: add support for software TSO This series adds support for driver level TSO in the dpaa2-eth driver. The first 5 patches lay the ground work for the actual feature: rearrange some variable declaration, cleaning up the interraction with the S/G Table buffer cache etc. The 6th patch adds the actual driver level software TSO support by using the usual tso_build_hdr()/tso_build_data() APIs and creates the S/G FDs. With this patch set we can see the following improvement in a TCP flow running on a single A72@2.2GHz of the LX2160A SoC: before: 6.38Gbit/s after: 8.48Gbit/s ==================== Signed-off-by: -
Ioana Ciornei authored
Once we added support in the dpaa2-eth for driver level software TSO we observed the following situation: if the EQCR CI (consumer index) is read from the cache-enabled area we sometimes end up with a computed value of available enqueue entries bigger than the size of the ring. This eventually will lead to the multiple enqueue of the same FD which will determine the same FD to end up on the Tx confirmation path and the same skb being freed twice. Just read the consumer index from the cache inhibited area so that we avoid this situation. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
-
