- 29 Jun, 2017 2 commits
-
-
Chris Wilson authored
When computing a hash for looking up relocation target handles in an execbuf, we start with a large size for the hashtable and proceed to halve it until the allocation succeeds. The final attempt is with an order of 0 (i.e. a single element). This means that we then pass bits=0 to hash_32() which then computes "hash >> (32 - 0)" to lookup the single element. Right shifting a value by the width of the operand is undefined, so limit the smallest hash table we use to order 1. v2: Keep the retry allocation flag for the final pass Fixes: 4ff4b44c ("drm/i915: Store a direct lookup from object handle to vma") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170629150425.27508-1-chris@chris-wilson.co.uk
-
Gabriel Krisman Bertazi authored
There are still cases on these platforms where an attempt is made to configure the CDCLK while the power domain is off, like when coming back from a suspend. So the workaround below is still needed. This effectively reverts commit 63ff3044 ("drm/i915: Nuke the VLV/CHV PFI programming power domain workaround"). Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101517Suggested-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Gabriel Krisman Bertazi <krisman@collabora.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170628210605.4994-1-krisman@collabora.co.ukReviewed-by:
-
- 28 Jun, 2017 3 commits
-
-
Chris Wilson authored
Once a client has requested a waitboost, we keep that waitboost active until all clients are no longer waiting. This is because we don't distinguish which waiter deserves the boost. However, with the advent of fence signaling, the signaler threads appear as waiters to the RPS interrupt handler. So instead of using a single boolean to track when to keep the waitboost active, use a counter of all outstanding waitboosted requests. At this point, I have removed all vestiges of the rate limiting on clients. Whilst this means that compositors should remain more fluid, it also means that boosts are more prevalent. See commit b29c19b6 ("drm/i915: Boost RPS frequency for CPU stalls") for a longer discussion on the pros and cons of both approaches. A drawback of this implementation is that it requires constant request submission to keep the waitboost trimmed (as it is now cancelled when the request is completed). This will be fine for a busy system, but near idle the boosts may be kept for longer than desired (effectively tens of vblanks worstcase) and there is a reliance on rc6 instead. v2: Remove defunct rps.client_lock Reported-by:
Michał Winiarski <michal.winiarski@intel.com> Signed-off-by:
-
Chris Wilson authored
i915_gem_suspend() is called from all of our finalization paths (suspend, hibernate, unload). i915_gem_drain_freed_objects() adds an arbitrary delay as it uses an rcu_barrier() to ensure that there are no more freed objects in flight, and this delay causes a large amount of variability in suspend timings. For S3 suspend, we do not need to free pages as doing so does not impact at all upon the system in its suspended state, unlike S4 hibernation where we do want the hibernation image to be as small as possible. Therefore we can forgo waiting inside i915_gem_suspend(), so long as we ensure that we do cleanup before unload (see i915_gem_load_cleanup()) and prefer to reap our objects prior to hibernation (see i915_gem_freeze()). Removing the rcu_barrier() from i915_gem_suspend() improves S3 latency by about 30ms on Skylake (ymmv). Reported-by:
David Weinehall <david.weinehall@linux.intel.com> Signed-off-by:
-
Chris Wilson authored
Due to the slight asynchronicity in handling the execlists interrupts (i.e. we defer the work to a handler that may consume more than one interrupt event), when the engine is idle we may still have an irq tasklet queued (especially when it has been deferred to a ksoftirqd). At the beginning of the tasklet, we assert that we do hold a device wakeref for the access we are about to perform. This assumes that when we idle and release the GT wakeref, all execlists work has been completed (since the elsp tracking says the hw is idle). However, there may still be a tasklet queued, so as we mark the engine idle, also cancel any pending tasklet. Signed-off-by:
-
- 27 Jun, 2017 5 commits
-
-
Christophe JAILLET authored
'dma_buf_vmap' returns NULL on error, not an error pointer. Fixes: 6cca22ed ("drm/i915: Add some mock tests for dmabuf interop") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: http://patchwork.freedesktop.org/patch/msgid/20170627053854.21152-1-christophe.jaillet@wanadoo.frReviewed-by:
-
Chris Wilson authored
Smatch spots: drivers/gpu/drm/i915/selftests/intel_hangcheck.c:669 igt_render_engine_reset_fallback() error: double unlock 'mutex:&i915->drm.struct_mutex' Signed-off-by:
Michel Thierry <michel.thierry@intel.com>
-
Ville Syrjälä authored
We have pretty clear evidence that MSIs are getting lost on g4x and somehow the interrupt logic doesn't seem to recover from that state even if we try hard to clear the IIR. Disabling IER around the normal IIR clearing in the irq handler isn't sufficient to avoid this, so the problem really seems to be further up the interrupt chain. This should guarantee that there's always an edge if any IIR bits are set after the interrupt handler is done, which should normally guarantee that the CPU interrupt is generated. That approach seems to work perfectly on VLV/CHV, but apparently not on g4x. MSI is documented to be broken on 965gm at least. The chipset spec says MSI is defeatured because interrupts can be delayed or lost, which fits well with what we're seeing on g4x. Previously we've already disabled GMBUS interrupts on g4x because somehow GMBUS manages to raise legacy interrupts even when MSI is enabled. Since there's such widespread MSI breakahge all over in the pre-gen5 land let's just give up on MSI on these platforms. Seqno reporting might be negatively affected by this since the legcy interrupts aren't guaranteed to be ordered with the seqno writes, whereas MSI interrupts may be? But an occasioanlly missed seqno seems like a small price to pay for generally working interrupts. Cc: stable@vger.kernel.org Cc: Diego Viola <diego.viola@gmail.com> Tested-by:
Diego Viola <diego.viola@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101261Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Manasi Navare authored
Now the VBT.seq->t11_t12 value adds 100ms to both Gen9_LP as well as non Gen9_LP cases so no need to special case and do -1 during HW readout and +1 during pp_div write for Gen9_LP/CNP case. Reviewed-by:
Manasi Navare <manasi.d.navare@intel.com> Suggested-by:
-
Manasi Navare authored
When we read the VBT t11_t12 value for panel power cycle delay, it is a zero based value so we need to 100ms to that. And then it needs to be multiplied by 10 to store it in 100usecs unit same as SW VBT. v3: * Add it as part of series v2: * Change the VBT value instead of HW readout and pp div (Ville Syrjala) Reviewed-by:
-
- 23 Jun, 2017 4 commits
-
-
Chris Wilson authored
Trying to do a modeset from within a reset is fraught with danger. We can fall into a cyclic deadlock where the modeset is waiting on a previous modeset that is waiting on a request, and since the GPU hung that request completion is waiting on the reset. As modesetting doesn't allow its locks to be broken and restarted, or for its *own* reset mechanism to take over the display, we have to do something very evil instead. If we detect that we are stuck waiting to prepare the display reset (by using a very simple timeout), resort to cancelling all in-flight requests and throwing the user data into /dev/null, which is marginally better than the driver locking up and keeping that data to itself. This is not a fix; this is just a workaround that unbreaks machines until we can resolve the deadlock in a way that doesn't lose data! v2: Move the retirement from set-wegded to the i915_reset() error path, after which we no longer any delayed worker cleanup for i915_handle_error() v3: C abuse for syntactic sugar v4: Cover all waits with the timeout to catch more driver breakage References: https://bugs.freedesktop.org/show_bug.cgi?id=99093Signed-off-by:
-
Puthikorn Voravootivat authored
This patch adds option to enable dynamic backlight for eDP panel that supports this feature via DPCD register and set minimum / maximum brightness to 0% and 100% of the normal brightness. Signed-off-by:
Puthikorn Voravootivat <puthik@chromium.org> Reviewed-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
-
Puthikorn Voravootivat authored
Add heuristic to decide that AUX or PWM pin should use for backlight brightness adjustment and modify i915 param description to have auto, force disable, and force enable. The heuristic to determine that using AUX pin is better than using PWM pin is that the panel support any of the feature list here. - Regional backlight brightness adjustment - Backlight PWM frequency set - More than 8 bits resolution of brightness level - Backlight enablement via AUX and not by BL_ENABLE pin Signed-off-by:
-
Puthikorn Voravootivat authored
Read desired PWM frequency from panel vbt and calculate the value for divider in DPCD address 0x724 and 0x728 to have as many bits as possible for PWM duty cyle for granularity of brightness adjustment while the frequency divisor is still within 25% of the desired value. Signed-off-by:
-
- 22 Jun, 2017 7 commits
-
-
Ville Syrjälä authored
Make the code less confusiong by always using the top 9 bits of the LPC bridge device ID to detect the PCH type. We need to add a bit of new code for WPT, and we need to adjust the KBP ID as well. All the other pre-CNP IDs are fine as is. The virtualization cases I think are fine. These P2X and P3X IDs actually just look like the old PIIX4 and PIIX3 IDs to me. Not sure why they're not called PIIX3/4 though. The qemu one has a comment saying the full ID is 0x2918 which is fine with 9 bits. v2: Keep the CNP ID as 0xa300 (DK) Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
-
Ville Syrjälä authored
Write the '!(SNB||IVB)' checks in the CPT/PPT detections as '!SNB && !IVB' to make it less messy looking, and clear out some useless parens the from the virtualization PCH detection case. Signed-off-by:
-
Ville Syrjälä authored
For our purposes PPT is equivalent to CPT, and WPT is equivalent to LPT. Document that fact. Signed-off-by:
-
Ville Syrjälä authored
Fix a typo in the PCH type debug message. Signed-off-by:
-
Ville Syrjälä authored
We have a few cases comparing pch_type directly. Let's just replace them with HAS_PCH_CPT() since CPT/PPT is what they're looking for. Signed-off-by:
-
Matthew Auld authored
The vma already contains most of the information we need for insertion. But also in preparation for supporting huge gtt pages, it would be useful to know the details of the vma, such that we can we can easily determine the page sizes we are allowed to use when inserting into the 48b PPGTT. This is especially true for 64K where we can't just arbitrarily use it, since we require aligning/padding the vm space to 2M, which sometimes we can't enforce in the upper levels. Suggested-by:
Matthew Auld <matthew.auld@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by:
-
Chris Wilson authored
commit 2889caa9 ("drm/i915: Eliminate lots of iterations over the execobjects array") jiggled around the error handling and replace a test that we cleaned up properly after ourselves with an assertion. That assertion failed because in the release function (moments after the assertion) we were indeed forgetting to mark the vma as cleared. The consequence was when testing an invalid relocation address, we would try to release the vma twice (following the couple of attempts to verify the address) and on the second release notice that the first release was incomplete. Testcase: igt/gem_reloc_overflow/invalid-address Fixes: 2889caa9 ("drm/i915: Eliminate lots of iterations over the execobjects array") Signed-off-by:
-
- 21 Jun, 2017 5 commits
-
-
Chris Wilson authored
Highly unlikely, but if the stop_machine() did suspend the tasklet, we want to make sure that when it wakes it finds there is nothing to do. Otherwise, it will loudly complain that the ELSP port tracking no longer matches the hardware, and we will be mightly confused. Signed-off-by:
-
Chris Wilson authored
As we walk the obj->vma_list in per_file_stats(), we need to hold struct_mutex to prevent alteration of that list. Fixes: 1d2ac403 ("drm: Protect dev->filelist with its own mutex") Fixes: c84455b4 ("drm/i915: Move debug only per-request pid tracking from request to ctx") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101460Signed-off-by:
-
Chris Wilson authored
In looking at a use-after-free on Baytrail, it looks like the VMA's activity tracking is suspect. Add some asserts to catch freeing the VMA before we have decoupled all of its i915_gem_active trackers. References: https://bugs.freedesktop.org/show_bug.cgi?id=101511Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
-
Chris Wilson authored
Since we may track unfenced access (GPU access to the vma that explicitly requires no fence), vma->last_fence may be set without any attached fence (vma->fence) and so will not be flushed when we call i915_vma_put_fence(). Since we stopped doing a full retire of the activity trackers for unbind, we need to explicitly retire each tracker. Fixes: b0decaf7 ("drm/i915: Track active vma requests") Signed-off-by:
-
Nicholas Piggin authored
kbuild test robot found a build failure when building with thin archives: http://marc.info/?l=linux-kbuild&m=149802285009737&w=2Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
- 20 Jun, 2017 14 commits
-
-
Chris Wilson authored
i915_vma_move_to_active() takes the execobject flags and not a boolean! Instead of passing EXEC_OBJECT_WRITE we passed true [i.e. EXEC_OBJECT_NEEDS_FENCE] causing us to start tracking the vma->last_fence access and since we forgot to clear that on unbinding, we caused a use-after-free. [ 321.263854] BUG: KASAN: use-after-free in i915_gem_request_retire+0x1728/0x1740 [i915] [ 321.264001] Read of size 8 at addr ffff880100fc67d8 by task gem_exec_reloc/2868 [ 321.264181] CPU: 0 PID: 2868 Comm: gem_exec_reloc Not tainted 4.12.0-rc6-CI-Custom_2759+ #1 [ 321.264195] Hardware name: GIGABYTE GB-BXBT-1900/MZBAYAB-00, BIOS F6 02/17/2015 [ 321.264208] Call Trace: [ 321.264234] dump_stack+0x67/0x99 [ 321.264260] print_address_description+0x77/0x290 [ 321.264437] ? i915_gem_request_retire+0x1728/0x1740 [i915] [ 321.264459] kasan_report+0x269/0x350 [ 321.264487] __asan_report_load8_noabort+0x14/0x20 [ 321.264660] i915_gem_request_retire+0x1728/0x1740 [i915] [ 321.264841] ? intel_ring_context_pin+0x131/0x690 [i915] [ 321.265021] i915_gem_request_alloc+0x2c6/0x1220 [i915] [ 321.265044] ? _raw_spin_unlock_irqrestore+0x3d/0x60 [ 321.265226] i915_gem_do_execbuffer+0xac0/0x2a20 [i915] [ 321.265250] ? __lock_acquire+0xceb/0x5450 [ 321.265269] ? entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 321.265291] ? kvmalloc_node+0x6b/0x80 [ 321.265310] ? kvmalloc_node+0x6b/0x80 [ 321.265489] ? eb_relocate_slow+0xbe0/0xbe0 [i915] [ 321.265520] ? ___slab_alloc.constprop.28+0x2ab/0x3d0 [ 321.265549] ? debug_check_no_locks_freed+0x280/0x280 [ 321.265591] ? __might_fault+0xc6/0x1b0 [ 321.265782] i915_gem_execbuffer2+0x14a/0x3f0 [i915] [ 321.265815] drm_ioctl+0x4ba/0xaa0 [ 321.265986] ? i915_gem_execbuffer+0xde0/0xde0 [i915] [ 321.266017] ? drm_getunique+0x270/0x270 [ 321.266068] do_vfs_ioctl+0x17f/0xfa0 [ 321.266091] ? __fget+0x1ba/0x330 [ 321.266112] ? lock_acquire+0x390/0x390 [ 321.266133] ? ioctl_preallocate+0x1d0/0x1d0 [ 321.266164] ? __fget+0x1db/0x330 [ 321.266194] ? __fget_light+0x79/0x1f0 [ 321.266219] SyS_ioctl+0x3c/0x70 [ 321.266247] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 321.266265] RIP: 0033:0x7fcede207357 [ 321.266279] RSP: 002b:00007ffef0effe58 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 321.266307] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007fcede207357 [ 321.266321] RDX: 00007ffef0effef0 RSI: 0000000040406469 RDI: 0000000000000004 [ 321.266335] RBP: ffffffff812097c6 R08: 0000000000000008 R09: 0000000000000000 [ 321.266349] R10: 0000000000000008 R11: 0000000000000246 R12: ffff880116bcff98 [ 321.266363] R13: ffffffff81cb7cb3 R14: ffff880116bcff70 R15: 0000000000000000 [ 321.266385] ? __this_cpu_preempt_check+0x13/0x20 [ 321.266406] ? trace_hardirqs_off_caller+0x1d6/0x2c0 [ 321.266487] Allocated by task 2868: [ 321.266568] save_stack_trace+0x16/0x20 [ 321.266586] kasan_kmalloc+0xee/0x180 [ 321.266602] kasan_slab_alloc+0x12/0x20 [ 321.266620] kmem_cache_alloc+0xc7/0x2e0 [ 321.266795] i915_vma_instance+0x28c/0x1540 [i915] [ 321.266964] eb_lookup_vmas+0x5a7/0x2250 [i915] [ 321.267130] i915_gem_do_execbuffer+0x69a/0x2a20 [i915] [ 321.267296] i915_gem_execbuffer2+0x14a/0x3f0 [i915] [ 321.267315] drm_ioctl+0x4ba/0xaa0 [ 321.267333] do_vfs_ioctl+0x17f/0xfa0 [ 321.267350] SyS_ioctl+0x3c/0x70 [ 321.267369] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 321.267428] Freed by task 177: [ 321.267502] save_stack_trace+0x16/0x20 [ 321.267521] kasan_slab_free+0xad/0x180 [ 321.267539] kmem_cache_free+0xc5/0x340 [ 321.267710] i915_vma_unbind+0x666/0x10a0 [i915] [ 321.267880] i915_vma_close+0x23a/0x2f0 [i915] [ 321.268048] __i915_gem_free_objects+0x17d/0xc70 [i915] [ 321.268215] __i915_gem_free_work+0x49/0x70 [i915] [ 321.268234] process_one_work+0x66f/0x1410 [ 321.268252] worker_thread+0xe1/0xe90 [ 321.268269] kthread+0x304/0x410 [ 321.268285] ret_from_fork+0x27/0x40 [ 321.268346] The buggy address belongs to the object at ffff880100fc6640 which belongs to the cache i915_vma of size 656 [ 321.268550] The buggy address is located 408 bytes inside of 656-byte region [ffff880100fc6640, ffff880100fc68d0) [ 321.268741] The buggy address belongs to the page: [ 321.268837] page:ffffea000403f000 count:1 mapcount:0 mapping: (null) index:0xffff880100fc5980 compound_mapcount: 0 [ 321.269045] flags: 0x8000000000008100(slab|head) [ 321.269147] raw: 8000000000008100 0000000000000000 ffff880100fc5980 00000001001e001d [ 321.269312] raw: ffffea0004038e20 ffff880116b46240 ffff88011646c640 0000000000000000 [ 321.269484] page dumped because: kasan: bad access detected [ 321.269665] Memory state around the buggy address: [ 321.269778] ffff880100fc6680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 321.269949] ffff880100fc6700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 321.270115] >ffff880100fc6780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 321.270279] ^ [ 321.270410] ffff880100fc6800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 321.270576] ffff880100fc6880: fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc fc [ 321.270740] ================================================================== [ 321.270903] Disabling lock debugging due to kernel taint Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101511 Fixes: 7dd4f672 ("drm/i915: Async GPU relocation processing") Signed-off-by: -
Michel Thierry authored
This feature is made available only from Gen8, for previous gen devices driver uses legacy full gpu reset. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by:
Tomas Elf <tomas.elf@intel.com> Signed-off-by:
Arun Siluvery <arun.siluvery@linux.intel.com> Signed-off-by:
-
Michel Thierry authored
Check that we can reset specific engines, also check the fallback to full reset if something didn't work. v2: rebase. v3: use RESET_ENGINE_IN_PROGRESS flag. v4: use I915_RESET_ENGINE flag. Signed-off-by:
-
Michel Thierry authored
A new variable is added to export the reset counts to debugfs, this includes full gpu reset and engine reset count. This is useful for tests where they are expected to trigger reset; these counts are checked before and after the test to ensure the same. v2: Include reset engine count in i915_engine_info too (Chris). Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by:
-
Michel Thierry authored
Driver maintains count of how many times a given engine is reset, useful to capture this in error state also. It gives an idea of how engine is coping up with the workloads it is executing before this error state. A follow-up patch will provide this information in debugfs. v2: s/engine_reset/reset_engine/ (Chris) Define count as unsigned int (Tvrtko) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: -
Michel Thierry authored
This change implements support for per-engine reset as an initial, less intrusive hang recovery option to be attempted before falling back to the legacy full GPU reset recovery mode if necessary. This is only supported from Gen8 onwards. Hangchecker determines which engines are hung and invokes error handler to recover from it. Error handler schedules recovery for each of those engines that are hung. The recovery procedure is as follows, - identifies the request that caused the hang and it is dropped - force engine to idle: this is done by issuing a reset request - reset the engine - re-init the engine to resume submissions. If engine reset fails then we fall back to heavy weight full gpu reset which resets all engines and reinitiazes complete state of HW and SW. v2: Rebase. v3: s/*engine_reset*/*reset_engine*/; freeze engine and irqs before calling i915_gem_reset_engine (Chris). v4: Rebase, modify i915_gem_reset_prepare to use a ring mask and reuse the function for reset_engine. v5: intel_reset_engine_start/cancel instead of request/unrequest_reset. v6: Clean up reset_engine function to not require mutex, i.e. no need to call revoke/restore_fences and _retire_requests (Chris). v7: Remove leftovers from v5, i.e. no need to disable irq, hold forcewake or wakeup the handoff bit (Chris). v8: engine_retire_requests should be (and it was) static; explain that we have to re-init the engine after reset, which is why the init_hw call is needed; check reset-in-progress flag (Chris). v9: Rebase, include code to pass the active request to gem_reset_engine (as it is already done in full reset). Remove unnecessary intel_reset_engine_start/cancel, these are executed as part of the reset. v10: Rebase, use the right I915_RESET_ENGINE flag. v11: Fixup to call reset_finish_engine even on error. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by:
-
Michel Thierry authored
This is a preparatory patch which modifies error handler to do per engine hang recovery. The actual patch which implements this sequence follows later in the series. The aim is to prepare existing recovery function to adapt to this new function where applicable (which fails at this point because core implementation is lacking) and continue recovery using legacy full gpu reset. A helper function is also added to query the availability of engine reset. A subsequent patch will add the capability to query which type of reset is present (engine -> full -> no-reset) via the get-param ioctl. It has been decided that the error events that are used to notify user of reset will only be sent in case if full chip reset. In case of just single (or multiple) engine resets, userspace won't be notified by these events. Note that this implementation of engine reset is for i915 directly submitting to the ELSP, where the driver manages the hang detection, recovery and resubmission. With GuC submission these tasks are shared between driver and firmware; i915 will still responsible for detecting a hang, and when it does it will have to request GuC to reset that Engine and remind the firmware about the outstanding submissions. This will be added in different patch. v2: rebase, advertise engine reset availability in platform definition, add note about GuC submission. v3: s/*engine_reset*/*reset_engine*/. (Chris) Handle reset as 2 level resets, by first going to engine only and fall backing to full/chip reset as needed, i.e. reset_engine will need the struct_mutex. v4: Pass the engine mask to i915_reset. (Chris) v5: Rebase, update selftests. v6: Rebase, prepare for mutex-less reset engine. v7: Pass reset_engine mask as a function parameter, and iterate over the engine mask for reset_engine. (Chris) v8: Use i915.reset >=2 in has_reset_engine; remove redundant reset logging; add a reset-engine-in-progress flag to prevent concurrent resets, and avoid dual purposing of reset-backoff. (Chris) v9: Support reset of different engines in parallel (Chris) v10: Handle reset-engine flag locking better (Chris) v11: Squash in reporting of per-engine-reset availability. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by:
Ian Lister <ian.lister@intel.com> Signed-off-by:
-
Michel Thierry authored
In preparation for engine reset work update this parameter to handle more than one type of reset. Default at the moment is still full gpu reset. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by:
-
Michel Thierry authored
And store the active request so that we only search for it once. v2: Check for request completion inside _prepare_engine, don't use ECANCELED, remove unnecessary null checks (Chris). v3: Capture active requests during reset_prepare and store it the engine hangcheck obj. v4: Rename commit, change i915_gem_reset_request to just confirm the active_request is still incomplete, instead of engine_stalled (Chris). v5: With style; pass the active request to gem_reset_engine, keep single return in reset_prepare_engine (Chris). v6: Moved before reset-engine code appears (Chris) Suggested-by:
-
Chris Wilson authored
If we enter i915_handle_error() a second time and a global reset is already in progress, we can simply wait for completion of the first reset. Currently we exit early prior to the actual reset being performed -- the worst of both worlds! v2: Plug into the existing reset_queue, and remember that kselftests is playing games with I915_RESET_BACKOFF to prevent hangcheck from screwing up. v3: Rename to i915_reset_device to fit in better with i915_reset_engine Signed-off-by:
-
Chris Wilson authored
Whilst the contents of the context is still protected by the big struct_mutex, this is not much of an improvement. It is just one tiny step towards reducing our BKL. Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170620110547.15947-3-chris@chris-wilson.co.uk
-
Chris Wilson authored
If we move the actual cleanup of the context to a worker, we can allow the final free to be called from any context and avoid undue latency in the caller. v2: Negotiate handling the delayed contexts free by flushing the workqueue before calling i915_gem_context_fini() and performing the final free of the kernel context directly v3: Flush deferred frees before new context allocations Signed-off-by:
-
Chris Wilson authored
Create a substruct to hold all the global context state under drm_i915_private. Signed-off-by:
-
Tvrtko Ursulin authored
Since bb8f0f5a ("drm/i915: Split intel_engine allocation and initialisation") intel_info->num_rings is set early in the load sequence and so available to be used direclty in the 2nd load phase. Signed-off-by:
-
