- 29 Jun, 2017 3 commits
-
-
Ilya Matveychikov authored
commit a91e0f68 upstream. When using get_options() it's possible to specify a range of numbers, like 1-100500. The problem is that it doesn't track array size while calling internally to get_range() which iterates over the range and fills the memory with numbers. Link: http://lkml.kernel.org/r/2613C75C-B04D-4BFF-82A6-12F97BA0F620@gmail.comSigned-off-by:
Ilya V. Matveychikov <matvejchikov@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
NeilBrown authored
commit 9fa4eb8e upstream. If a positive status is passed with the AUTOFS_DEV_IOCTL_FAIL ioctl, autofs4_d_automount() will return ERR_PTR(status) with that status to follow_automount(), which will then dereference an invalid pointer. So treat a positive status the same as zero, and map to ENOENT. See comment in systemd src/core/automount.c::automount_send_ready(). Link: http://lkml.kernel.org/r/871sqwczx5.fsf@notabene.neil.brown.nameSigned-off-by:
NeilBrown <neilb@suse.com> Cc: Ian Kent <raven@themaw.net> Signed-off-by:
-
Kees Cook authored
commit 98da7d08 upstream. When limiting the argv/envp strings during exec to 1/4 of the stack limit, the storage of the pointers to the strings was not included. This means that an exec with huge numbers of tiny strings could eat 1/4 of the stack limit in strings and then additional space would be later used by the pointers to the strings. For example, on 32-bit with a 8MB stack rlimit, an exec with 1677721 single-byte strings would consume less than 2MB of stack, the max (8MB / 4) amount allowed, but the pointers to the strings would consume the remaining additional stack space (1677721 * 4 == 6710884). The result (1677721 + 6710884 == 8388605) would exhaust stack space entirely. Controlling this stack exhaustion could result in pathological behavior in setuid binaries (CVE-2017-1000365). [akpm@linux-foundation.org: additional commenting from Kees] Fixes: b6a2fea3 ("mm: variable length argument support") Link: http://lkml.kernel.org/r/20170622001720.GA32173@beastSigned-off-by:
Kees Cook <keescook@chromium.org> Acked-by:
Rik van Riel <riel@redhat.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Qualys Security Advisory <qsa@qualys.com> Signed-off-by:
-
- 26 Jun, 2017 35 commits
-
-
Greg Kroah-Hartman authored
-
Hugh Dickins authored
commit f4cb767d upstream. Trinity gets kernel BUG at mm/mmap.c:1963! in about 3 minutes of mmap testing. That's the VM_BUG_ON(gap_end < gap_start) at the end of unmapped_area_topdown(). Linus points out how MAP_FIXED (which does not have to respect our stack guard gap intentions) could result in gap_end below gap_start there. Fix that, and the similar case in its alternative, unmapped_area(). Fixes: 1be7107f ("mm: larger stack guard gap, between vmas") Reported-by:
Dave Jones <davej@codemonkey.org.uk> Debugged-by:
Hugh Dickins <hughd@google.com> Acked-by:
-
Helge Deller authored
commit bd726c90 upstream. Fix expand_upwards() on architectures with an upward-growing stack (parisc, metag and partly IA-64) to allow the stack to reliably grow exactly up to the address space limit given by TASK_SIZE. Signed-off-by:
Helge Deller <deller@gmx.de> Acked-by:
-
Hugh Dickins authored
commit 1be7107f upstream. Stack guard page is a useful feature to reduce a risk of stack smashing into a different mapping. We have been using a single page gap which is sufficient to prevent having stack adjacent to a different mapping. But this seems to be insufficient in the light of the stack usage in userspace. E.g. glibc uses as large as 64kB alloca() in many commonly used functions. Others use constructs liks gid_t buffer[NGROUPS_MAX] which is 256kB or stack strings with MAX_ARG_STRLEN. This will become especially dangerous for suid binaries and the default no limit for the stack size limit because those applications can be tricked to consume a large portion of the stack and a single glibc call could jump over the guard page. These attacks are not theoretical, unfortunatelly. Make those attacks less probable by increasing the stack guard gap to 1MB (on systems with 4k pages; but make it depend on the page size because systems with larger base pages might cap stack allocations in the PAGE_SIZE units) which should cover larger alloca() and VLA stack allocations. It is obviously not a full fix because the problem is somehow inherent, but it should reduce attack space a lot. One could argue that the gap size should be configurable from userspace, but that can be done later when somebody finds that the new 1MB is wrong for some special case applications. For now, add a kernel command line option (stack_guard_gap) to specify the stack gap size (in page units). Implementation wise, first delete all the old code for stack guard page: because although we could get away with accounting one extra page in a stack vma, accounting a larger gap can break userspace - case in point, a program run with "ulimit -S -v 20000" failed when the 1MB gap was counted for RLIMIT_AS; similar problems could come with RLIMIT_MLOCK and strict non-overcommit mode. Instead of keeping gap inside the stack vma, maintain the stack guard gap as a gap between vmas: using vm_start_gap() in place of vm_start (or vm_end_gap() in place of vm_end if VM_GROWSUP) in just those few places which need to respect the gap - mainly arch_get_unmapped_area(), and and the vma tree's subtree_gap support for that. Original-patch-by:
Oleg Nesterov <oleg@redhat.com> Original-patch-by:
Willy Tarreau <w@1wt.eu> [gkh: minor build fixes for 3.18] Signed-off-by:
-
Thomas Gleixner authored
commit ff86bf0c upstream. The alarmtimer code has another source of potentially rearming itself too fast. Interval timers with a very samll interval have a similar CPU hog effect as the previously fixed overflow issue. The reason is that alarmtimers do not implement the normal protection against this kind of problem which the other posix timer use: timer expires -> queue signal -> deliver signal -> rearm timer This scheme brings the rearming under scheduler control and prevents permanently firing timers which hog the CPU. Bringing this scheme to the alarm timer code is a major overhaul because it lacks all the necessary mechanisms completely. So for a quick fix limit the interval to one jiffie. This is not problematic in practice as alarmtimers are usually backed by an RTC for suspend which have 1 second resolution. It could be therefor argued that the resolution of this clock should be set to 1 second in general, but that's outside the scope of this fix. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Kostya Serebryany <kcc@google.com> Cc: syzkaller <syzkaller@googlegroups.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Dmitry Vyukov <dvyukov@google.com> Link: http://lkml.kernel.org/r/20170530211655.896767100@linutronix.deSigned-off-by:
-
Heiner Kallweit authored
commit fa07ab72 upstream. In case __irq_set_trigger() fails the resources requested via irq_request_resources() are not released. Add the missing release call into the error handling path. Fixes: c1bacbae ("genirq: Provide irq_request/release_resources chip callbacks") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Yu Zhao authored
commit ef707629 upstream. I saw need_resched() warnings when swapping on large swapfile (TBs) because continuously allocating many pages in swap_cgroup_prepare() took too long. We already cond_resched when freeing page in swap_cgroup_swapoff(). Do the same for the page allocation. Link: http://lkml.kernel.org/r/20170604200109.17606-1-yuzhao@google.comSigned-off-by:
Yu Zhao <yuzhao@google.com> Acked-by:
Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by:
-
James Morse authored
commit 7258ae5c upstream. memory_failure() chooses a recovery action function based on the page flags. For huge pages it uses the tail page flags which don't have anything interesting set, resulting in: > Memory failure: 0x9be3b4: Unknown page state > Memory failure: 0x9be3b4: recovery action for unknown page: Failed Instead, save a copy of the head page's flags if this is a huge page, this means if there are no relevant flags for this tail page, we use the head pages flags instead. This results in the me_huge_page() recovery action being called: > Memory failure: 0x9b7969: recovery action for huge page: Delayed For hugepages that have not yet been allocated, this allows the hugepage to be dequeued. Fixes: 524fca1e ("HWPOISON: fix misjudgement of page_action() for errors on mlocked pages") Link: http://lkml.kernel.org/r/20170524130204.21845-1-james.morse@arm.comSigned-off-by:
James Morse <james.morse@arm.com> Tested-by:
Punit Agrawal <punit.agrawal@arm.com> Acked-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
-
Corentin Labbe authored
commit d2f48f05 upstream. When plugging an USB webcam I see the following message: [106385.615559] xhci_hcd 0000:04:00.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? [106390.583860] handle_tx_event: 913 callbacks suppressed With this patch applied, I get no more printing of this message. Signed-off-by:
Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Dan Carpenter authored
commit 8128a31e upstream. c2port_device_register() never returns NULL, it uses error pointers. Link: http://lkml.kernel.org/r/20170412083321.GC3250@mwanda Fixes: 65131cd5 ("c2port: add c2port support for Eurotech Duramar 2150") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Rodolfo Giometti <giometti@linux.it> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Chris Brandt authored
commit dd14a3e9 upstream. The timeout for BULK packets was 300ms which is a long time if other endpoints or devices are waiting for their turn. Changing it to 50ms greatly increased the overall performance for multi-endpoint devices. Fixes: 5d304358 ("usb: r8a66597-hcd: host controller driver for R8A6659") Signed-off-by:
Chris Brandt <chris.brandt@renesas.com> Signed-off-by:
-
Chris Brandt authored
commit 1f873d85 upstream. If multiple endpoints on a single device have pending IN URBs and one endpoint times out due to NAKs (perfectly legal), select a different endpoint URB to try. The existing code only checked to see another device address has pending URBs and ignores other IN endpoints on the current device address. This leads to endpoints never getting serviced if one endpoint is using NAK as a flow control method. Fixes: 5d304358 ("usb: r8a66597-hcd: host controller driver for R8A6659") Signed-off-by:
-
Johan Hovold authored
commit d81182ce upstream. Flag the first and only port as removable while also leaving the remaining bits (including the reserved bit zero) unset in accordance with the specifications: "Within a byte, if no port exists for a given location, the bit field representing the port characteristics shall be 0." Also add a comment marking the legacy PortPwrCtrlMask field. Fixes: 1cd8fd28 ("usb: gadget: dummy_hcd: add SuperSpeed support") Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: Tatyana Brokhman <tlinder@codeaurora.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Arnd Bergmann authored
commit 6830733d upstream. The driver uses a relatively large data structure on the stack, which showed up on my radar as we get a warning with the "latent entropy" GCC plugin: drivers/media/usb/pvrusb2/pvrusb2-eeprom.c:153:1: error: the frame size of 1376 bytes is larger than 1152 bytes [-Werror=frame-larger-than=] The warning is usually hidden as we raise the warning limit to 2048 when the plugin is enabled, but I'd like to lower that again in the future, and making this function smaller helps to do that without build regressions. Further analysis shows that putting an 'i2c_client' structure on the stack is not really supported, as the embedded 'struct device' is not initialized here, and we are only saved by the fact that the function that is called here does not use the pointer at all. Fixes: d855497e ("V4L/DVB (4228a): pvrusb2 to kernel 2.6.18") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Anton Bondarenko authored
commit 1a744d2e upstream. Free memory allocated for address0_mutex if allocation of bandwidth_mutex failed. Fixes: feb26ac3 ("usb: core: hub: hub_port_init lock controller instead of bus") Signed-off-by:
Anton Bondarenko <anton.bondarenko.sama@gmail.com> Acked-by:
-
Johan Hovold authored
commit 93491ced upstream. Add define for the maximum number of ports on a SuperSpeed hub as per USB 3.1 spec Table 10-5, and use it when verifying the retrieved hub descriptor. This specifically avoids benign attempts to update the DeviceRemovable mask for non-existing ports (should we get that far). Fixes: dbe79bbe ("USB 3.0 Hub Changes") Acked-by:
-
Matt Ranostay authored
commit 6272c0de upstream. According to the datasheet the RCO must be recalibrated on every power-on-reset. Also remove mutex locking in the calibration function since callers other than the probe function (which doesn't need it) will have a lock. Fixes: 24ddb0e4 ("iio: Add AS3935 lightning sensor support") Cc: George McCollister <george.mccollister@gmail.com> Signed-off-by:
Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Dan Carpenter authored
commit 784047eb upstream. The "len" could be as low as -14 so we should check for negatives. Fixes: 9a7fe54d ("staging: r8188eu: Add source files for new driver - part 1") Signed-off-by:
-
Tony Lindgren authored
commit 8b8a84c5 upstream. Commit 16fa3dc7 ("mfd: omap-usb-tll: HOST TLL platform driver") added support for USB TLL, but uses OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF bit the wrong way. The comments in the code are correct, but the inverted use of OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF causes the register to be enabled instead of disabled unlike what the comments say. Without this change the Wrigley 3G LTE modem on droid 4 EHCI bus can be only pinged few times before it stops responding. Fixes: 16fa3dc7 ("mfd: omap-usb-tll: HOST TLL platform driver") Signed-off-by:
Tony Lindgren <tony@atomide.com> Acked-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Laura Abbott authored
commit 861ce4a3 upstream. '__vmalloc_start_set' currently only gets set in initmem_init() when !CONFIG_NEED_MULTIPLE_NODES. This breaks detection of vmalloc address with virt_addr_valid() with CONFIG_NEED_MULTIPLE_NODES=y, causing a kernel crash: [mm/usercopy] 517e1fbe: kernel BUG at arch/x86/mm/physaddr.c:78! Set '__vmalloc_start_set' appropriately for that case as well. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Laura Abbott <labbott@redhat.com> Reviewed-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Christophe JAILLET authored
commit be40597a upstream. UARTn_FRAME_PARITY_ODD is 0x0300 UARTn_FRAME_PARITY_EVEN is 0x0200 So if the UART is configured for EVEN parity, it would be reported as ODD. Fix it by correctly testing if the 2 bits are set. Fixes: 3afbd89c ("serial/efm32: add new driver") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Emmanuel Grumbach authored
commit 769dc04d upstream. When a peer sends a BAR frame with PM bit clear, we should not modify its PM state as madated by the spec in 802.11-20012 10.2.1.2. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Christophe JAILLET authored
commit 5ebb6dd3 upstream. We should ensure that 'plane_no' is '< vb->num_planes' as done in 'vb2_plane_cookie' just a few lines below. Fixes: e23ccc0a ("[media] v4l: add videobuf2 Video for Linux 2 driver framework") Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Tomasz Wilczyński authored
commit b8e11f7d upstream. Commit 27ed3cd2 (cpufreq: conservative: Fix the logic in frequency decrease checking) removed the 10 point substraction when comparing the load against down_threshold but did not remove the related limit for the down_threshold value. As a result, down_threshold lower than 11 is not allowed even though values from 1 to 10 do work correctly too. The comment ("cannot be lower than 11 otherwise freq will not fall") also does not apply after removing the substraction. For this reason, allow down_threshold to take any value from 1 to 99 and fix the related comment. Fixes: 27ed3cd2 (cpufreq: conservative: Fix the logic in frequency decrease checking) Signed-off-by:
Tomasz Wilczyński <twilczynski@naver.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Marc Kleine-Budde authored
commit 5cda3ee5 upstream. This patch adds the missing kfree() in gs_cmd_reset() to free the memory that is not used anymore after usb_control_msg(). Cc: Maximilian Schneider <max@schneidersoft.net> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Nicholas Bellinger authored
commit ba80aa90 upstream. This patch closes a long standing race in configfs between the creation of a new symlink in create_link(), while the symlink target's config_item is being concurrently removed via configfs_rmdir(). This can happen because the symlink target's reference is obtained by config_item_get() in create_link() before the CONFIGFS_USET_DROPPING bit set by configfs_detach_prep() during configfs_rmdir() shutdown is actually checked.. This originally manifested itself on ppc64 on v4.8.y under heavy load using ibmvscsi target ports with Novalink API: [ 7877.289863] rpadlpar_io: slot U8247.22L.212A91A-V1-C8 added [ 7879.893760] ------------[ cut here ]------------ [ 7879.893768] WARNING: CPU: 15 PID: 17585 at ./include/linux/kref.h:46 config_item_get+0x7c/0x90 [configfs] [ 7879.893811] CPU: 15 PID: 17585 Comm: targetcli Tainted: G O 4.8.17-customv2.22 #12 [ 7879.893812] task: c00000018a0d3400 task.stack: c0000001f3b40000 [ 7879.893813] NIP: d000000002c664ec LR: d000000002c60980 CTR: c000000000b70870 [ 7879.893814] REGS: c0000001f3b43810 TRAP: 0700 Tainted: G O (4.8.17-customv2.22) [ 7879.893815] MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 28222242 XER: 00000000 [ 7879.893820] CFAR: d000000002c664bc SOFTE: 1 GPR00: d000000002c60980 c0000001f3b43a90 d000000002c70908 c0000000fbc06820 GPR04: c0000001ef1bd900 0000000000000004 0000000000000001 0000000000000000 GPR08: 0000000000000000 0000000000000001 d000000002c69560 d000000002c66d80 GPR12: c000000000b70870 c00000000e798700 c0000001f3b43ca0 c0000001d4949d40 GPR16: c00000014637e1c0 0000000000000000 0000000000000000 c0000000f2392940 GPR20: c0000001f3b43b98 0000000000000041 0000000000600000 0000000000000000 GPR24: fffffffffffff000 0000000000000000 d000000002c60be0 c0000001f1dac490 GPR28: 0000000000000004 0000000000000000 c0000001ef1bd900 c0000000f2392940 [ 7879.893839] NIP [d000000002c664ec] config_item_get+0x7c/0x90 [configfs] [ 7879.893841] LR [d000000002c60980] check_perm+0x80/0x2e0 [configfs] [ 7879.893842] Call Trace: [ 7879.893844] [c0000001f3b43ac0] [d000000002c60980] check_perm+0x80/0x2e0 [configfs] [ 7879.893847] [c0000001f3b43b10] [c000000000329770] do_dentry_open+0x2c0/0x460 [ 7879.893849] [c0000001f3b43b70] [c000000000344480] path_openat+0x210/0x1490 [ 7879.893851] [c0000001f3b43c80] [c00000000034708c] do_filp_open+0xfc/0x170 [ 7879.893853] [c0000001f3b43db0] [c00000000032b5bc] do_sys_open+0x1cc/0x390 [ 7879.893856] [c0000001f3b43e30] [c000000000009584] system_call+0x38/0xec [ 7879.893856] Instruction dump: [ 7879.893858] 409d0014 38210030 e8010010 7c0803a6 4e800020 3d220000 e94981e0 892a0000 [ 7879.893861] 2f890000 409effe0 39200001 992a0000 <0fe00000> 4bffffd0 60000000 60000000 [ 7879.893866] ---[ end trace 14078f0b3b5ad0aa ]--- To close this race, go ahead and obtain the symlink's target config_item reference only after the existing CONFIGFS_USET_DROPPING check succeeds. This way, if configfs_rmdir() wins create_link() will return -ENONET, and if create_link() wins configfs_rmdir() will return -EBUSY. Reported-by:
Bryant G. Ly <bryantly@linux.vnet.ibm.com> Tested-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Dan Carpenter authored
commit b5c32061 upstream. My static checker complains that if "lvl" is ULONG_MAX (this is 64 bit) then some of the strings will overflow. I don't know if that's possible but it seems simple enough to make the buffers slightly larger. Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Waldemar Brodkorb <wbx@openadk.org> Signed-off-by:
-
Ard Biesheuvel authored
commit 29905b52 upstream. The function order_base_2() is defined (according to the comment block) as returning zero on input zero, but subsequently passes the input into roundup_pow_of_two(), which is explicitly undefined for input zero. This has gone unnoticed until now, but optimization passes in GCC 7 may produce constant folded function instances where a constant value of zero is passed into order_base_2(), resulting in link errors against the deliberately undefined '____ilog2_NaN'. So update order_base_2() to adhere to its own documented interface. [ See http://marc.info/?l=linux-kernel&m=147672952517795&w=2 and follow-up discussion for more background. The gcc "optimization pass" is really just broken, but now the GCC trunk problem seems to have escaped out of just specially built daily images, so we need to work around it in mainline. - Linus ] Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
-
Jonathan T. Leighton authored
[ Upstream commit ec5e3b0a ] This patch adds a check for the problematic case of an IPv4-mapped IPv6 source address and a destination address that is neither an IPv4-mapped IPv6 address nor in6addr_any, and returns an appropriate error. The check in done before returning from looking up the route. Signed-off-by:
Jonathan T. Leighton <jtleight@udel.edu> Signed-off-by:
-
Jonathan T. Leighton authored
[ Upstream commit 052d2369 ] This patch adds a check on the type of the source address for the case where the destination address is in6addr_any. If the source is an IPv4-mapped IPv6 source address, the destination is changed to ::ffff:127.0.0.1, and otherwise the destination is changed to ::1. This is done in three locations to handle UDP calls to either connect() or sendmsg() and TCP calls to connect(). Note that udpv6_sendmsg() delays handling an in6addr_any destination until very late, so the patch only needs to handle the case where the source is an IPv4-mapped IPv6 address. Signed-off-by:
-
Anssi Hannula authored
[ Upstream commit cd224553 ] xilinx_emaclite looks at the received data to try to determine the Ethernet packet length but does not properly clamp it if proto_type == ETH_P_IP or 1500 < proto_type <= 1518, causing a buffer overflow and a panic via skb_panic() as the length exceeds the allocated skb size. Fix those cases. Also add an additional unconditional check with WARN_ON() at the end. Signed-off-by:
Anssi Hannula <anssi.hannula@bitwise.fi> Fixes: bb81b2dd ("net: add Xilinx emac lite device driver") Signed-off-by:
-
Anssi Hannula authored
[ Upstream commit acf138f1 ] The xilinx_emaclite uses __raw_writel and __raw_readl for register accesses. Those functions do not imply any kind of memory barriers and they may be reordered. The driver does not seem to take that into account, though, and the driver does not satisfy the ordering requirements of the hardware. For clear examples, see xemaclite_mdio_write() and xemaclite_mdio_read() which try to set MDIO address before initiating the transaction. I'm seeing system freezes with the driver with GCC 5.4 and current Linux kernels on Zynq-7000 SoC immediately when trying to use the interface. In commit 123c1407 ("net: emaclite: Do not use microblaze and ppc IO functions") the driver was switched from non-generic in_be32/out_be32 (memory barriers, big endian) to __raw_readl/__raw_writel (no memory barriers, native endian), so apparently the device follows system endianness and the driver was originally written with the assumption of memory barriers. Rather than try to hunt for each case of missing barrier, just switch the driver to use iowrite32/ioread32/iowrite32be/ioread32be depending on endianness instead. Tested on little-endian Zynq-7000 ARM SoC FPGA. Signed-off-by:
-
Sachin Prabhu authored
commit b8c60012 upstream. Commit 4fcd1813 ("Fix reconnect to not defer smb3 session reconnect long after socket reconnect") changes the behaviour of the SMB2 echo service and causes it to renegotiate after a socket reconnect. However under default settings, the echo service could take up to 120 seconds to be scheduled. The patch forces the echo service to be called immediately resulting a negotiate call being made immediately on reconnect. Signed-off-by:
Sachin Prabhu <sprabhu@redhat.com> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
Steve French <smfrench@gmail.com> Acked-by:
-
Richard authored
commit 22322035 upstream. The code in block/partitions/msdos.c recognizes FreeBSD, OpenBSD and NetBSD partitions and does a reasonable job picking out OpenBSD and NetBSD UFS subpartitions. But for FreeBSD the subpartitions are always "bad". Kernel: <bsd:bad subpartition - ignored Though all 3 of these BSD systems use UFS as a file system, only FreeBSD uses relative start addresses in the subpartition declarations. The following patch fixes this for FreeBSD partitions and leaves the code for OpenBSD and NetBSD intact: Signed-off-by:
Richard Narron <comet.berkeley@gmail.com> Reviewed-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Heiko Carstens authored
commit c34a6905 upstream. The identity mapping is suboptimal for the last 2GB frame. The mapping will be established with a mix of 4KB and 1MB mappings instead of a single 2GB mapping. This happens because of a off-by-one bug introduced with commit 50be6345 ("s390/mm: Convert bootmem to memblock"). Currently the identity mapping looks like this: 0x0000000080000000-0x0000000180000000 4G PUD RW 0x0000000180000000-0x00000001fff00000 2047M PMD RW 0x00000001fff00000-0x0000000200000000 1M PTE RW With the bug fixed it looks like this: 0x0000000080000000-0x0000000200000000 6G PUD RW Fixes: 50be6345 ("s390/mm: Convert bootmem to memblock") Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Jean Delvare <jdelvare@suse.de> Signed-off-by:
-
- 14 Jun, 2017 2 commits
-
-
Greg Kroah-Hartman authored
-
Takashi Iwai authored
commit d11662f4 upstream. The read from ALSA timer device, the function snd_timer_user_tread(), may access to an uninitialized struct snd_timer_user fields when the read is concurrently performed while the ioctl like snd_timer_user_tselect() is invoked. We have already fixed the races among ioctls via a mutex, but we seem to have forgotten the race between read vs ioctl. This patch simply applies (more exactly extends the already applied range of) tu->ioctl_lock in snd_timer_user_tread() for closing the race window. Reported-by:
Alexander Potapenko <glider@google.com> Tested-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
