In order to remove dependency on rtnl lock and allow concurrent tcf_proto
modification, extend tcf_proto with reference counter. Implement helper
get/put functions for tcf proto and use them to modify cls API to always
take reference to tcf_proto while using it. Only release reference to
parent chain after releasing last reference to tp.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Extend tcf_chain with new filter_chain_lock mutex. Always lock the chain
when accessing filter_chain list, instead of relying on rtnl lock.
Dereference filter_chain with tcf_chain_dereference() lockdep macro to
verify that all users of chain_list have the lock taken.

Rearrange tp insert/remove code in tc_new_tfilter/tc_del_tfilter to execute
all necessary code while holding chain lock in order to prevent
invalidation of chain_info structure by potential concurrent change. This
also serializes calls to tcf_chain0_head_change(), which allows head change
callbacks to rely on filter_chain_lock for synchronization instead of rtnl
mutex.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When cls API is called without protection of rtnl lock, parallel
modification of chain is possible, which means that chain template can be
changed concurrently in certain circumstances. For example, when chain is
'deleted' by new user-space chain API, the chain might continue to be used
if it is referenced by actions, and can be 're-created' again by user. In
such case same chain structure is reused and its template is changed. To
protect from described scenario, cache chain template while holding block
lock. Introduce standalone tc_chain_notify_delete() function that works
with cached template values, instead of chains themselves.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

All users of block->chain_list rely on rtnl lock and assume that no new
chains are added when traversing the list. Use tcf_get_next_chain() to
traverse chain list without relying on rtnl mutex. This function iterates
over chains by taking reference to current iterator chain only and doesn't
assume external synchronization of chain list.

Don't take reference to all chains in block when flushing and use
tcf_get_next_chain() to safely iterate over chain list instead. Remove
tcf_block_put_all_chains() that is no longer used.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order to remove dependency on rtnl lock, use block->lock to protect
chain0 struct from concurrent modification. Rearrange code in chain0
callback add and del functions to only access chain0 when block->lock is
held.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order to remove dependency on rtnl lock, modify chain API to use
block->lock to protect chain from concurrent modification. Rearrange
tc_ctl_chain() code to call tcf_chain_hold() while holding block->lock to
prevent concurrent chain removal.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order to remove dependency on rtnl lock, protect
tcf_chain->explicitly_created flag with block->lock. Consolidate code that
checks and resets 'explicitly_created' flag into __tcf_chain_put() to
execute it atomically with rest of code that puts chain reference.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, tcf_block doesn't use any synchronization mechanisms to protect
critical sections that manage lifetime of its chains. block->chain_list and
multiple variables in tcf_chain that control its lifetime assume external
synchronization provided by global rtnl lock. Converting chain reference
counting to atomic reference counters is not possible because cls API uses
multiple counters and flags to control chain lifetime, so all of them must
be synchronized in chain get/put code.

Use single per-block lock to protect block data and manage lifetime of all
chains on the block. Always take block->lock when accessing chain_list.
Chain get and put modify chain lifetime-management data and parent block's
chain_list, so take the lock in these functions. Verify block->lock state
with assertions in functions that expect to be called with the lock taken
and are called from multiple places. Take block->lock when accessing
filter_chain_list.

In order to allow parallel update of rules on single block, move all calls
to classifiers outside of critical sections protected by new block->lock.
Rearrange chain get and put functions code to only access protected chain
data while holding block lock:
- Rearrange code to only access chain reference counter and chain action
  reference counter while holding block lock.
- Extract code that requires block->lock from tcf_chain_destroy() into
  standalone tcf_chain_destroy() function that is called by
  __tcf_chain_put() in same critical section that changes chain reference
  counters.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.

This patch fixes the following warnings:

drivers/isdn/i4l/isdn_v110.c: In function ‘EncodeMatrix’:
drivers/isdn/i4l/isdn_v110.c:353:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
    if (line >= mlen) {
       ^
drivers/isdn/i4l/isdn_v110.c:358:3: note: here
   case 128:
   ^~~~

Warning level 3 was used: -Wimplicit-fallthrough=3

Notice that, in this particular case, the code comment is modified
in accordance with what GCC is expecting to find.

This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.

This patch fixes the following warnings:

drivers/isdn/i4l/isdn_tty.c: In function ‘isdn_tty_edit_at’:
drivers/isdn/i4l/isdn_tty.c:3644:18: warning: this statement may fall through [-Wimplicit-fallthrough=]
       m->mdmcmdl = 0;
       ~~~~~~~~~~~^~~
drivers/isdn/i4l/isdn_tty.c:3646:5: note: here
     case 0:
     ^~~~

Warning level 3 was used: -Wimplicit-fallthrough=3

Notice that, in this particular case, the code comment is modified
in accordance with what GCC is expecting to find.

This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.

This patch fixes the following warning:

drivers/isdn/gigaset/ser-gigaset.c: In function ‘gigaset_tty_ioctl’:
drivers/isdn/gigaset/ser-gigaset.c:627:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
   switch (arg) {
   ^~~~~~
drivers/isdn/gigaset/ser-gigaset.c:638:2: note: here
  default:
  ^~~~~~~

Warning level 3 was used: -Wimplicit-fallthrough=3

Notice that, in this particular case, the code comment is modified
in accordance with what GCC is expecting to find.

This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>

Julian Wiedmann says:

====================
s390/qeth: updates 2019-02-12

please apply one more round of qeth patches to net-next.
This series targets the driver's control paths. It primarily brings improvements
to the error handling for sent cmds and received responses, along with the
usual cleanup and consolidation efforts.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This calls the existing errno translation helpers from the callbacks,
adding trivial wrappers where necessary. For cmds that have no
sophisticated errno translation, default to -EIO.

For IPA cmds with no callback, fall back to a minimal default. This is
currently being used by qeth_l3_send_setrouting().

Thus having all converted all callbacks, remove the legacy path in
qeth_send_control_data_cb().
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

By letting the callbacks deal with error translation, we no longer need
to pass the raw error codes back to the originator. This allows us to
slim down the callback's private data, and nicely simplifies the code.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Error propagation from cmd callbacks currently works in a way where
qeth_send_control_data_cb() picks the raw HW code from the response,
and the cmd's originator later translates this into an errno.
The callback itself only returns 0 ("done") or 1 ("expect more data").

This is
1. limiting, as the only means for the callback to report an internal
error is to invent pseudo HW codes (such as IPA_RC_ENOMEM), that
the originator then needs to understand. For non-IPA callbacks, we
even provide a separate field in the IO buffer metadata (iob->rc) so
the callback can pass back a return value.
2. fragile, as the originator must take care to not translate any errno
that is returned by qeth's own IO code paths (eg -ENOMEM). Also, any
originator that forgets to translate the HW codes potentially passes
garbage back to its caller. For instance, see
commit 2aa48671 ("s390/qeth: translate SETVLAN/DELVLAN errors").

Introduce a new model where all HW error translation is done within the
callback, and the callback returns
>  0, if it expects more data (as before)
== 0, on success
<  0, with an errno

Start off with converting all callbacks to the new model that either
a) pass back pseudo HW codes, or b) have a dependency on a specific
HW error code. Also convert c) the one callback that uses iob->rc, and
d) qeth_setadpparms_change_macaddr_cb() so that it can pass back an
error back to qeth_l2_request_initial_mac() even when the cmd itself
was successful.

The old model remains supported: if the callback returns 0, we still
propagate the response's HW error code back to the originator.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When sending cmds via qeth_send_control_data(), qeth puts the request
on the IO channel and then blocks on the reply object until the response
has been received.

If the IO completes with error, there will never be a response and we
block until the reply-wait hits its timeout. For this case, connect the
request buffer to its reply object, so that we can immediately cancel
the wait.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Current code enqueues & dequeues a reply object from the waiter list
in various places. In particular, the dequeue & enqueue in
qeth_send_control_data_cb() looks fragile - this can cause
qeth_clear_ipacmd_list() to skip the active object.
Add some helpers, and boil the logic down by giving
qeth_send_control_data() the sole responsibility to add and remove
objects.

qeth_send_control_data_cb() and qeth_clear_ipacmd_list() will now only
notify the reply object to interrupt its wait cycle. This can cause
a slight delay in the removal, but that's no concern.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

'len' specifies how much data we send to the HW, don't dump beyond this
boundary.
As of today this is no big concern - commands are built in full, zeroed
pages.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

csum offload and TSO have similar programming requirements. The TSO code
was reworked with commit "s390/qeth: enhance TSO control sequence",
adjust the csum control flow accordingly. Primarily this means replacing
custom helpers with more generic infrastructure.

Also, change the LP2LP check so that it warns on TX offload (not RX).
This is where reduced csum capability actually matters.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Current code attempts to enable all advertised HW csum offload features.
Future-proof this by enabling only those features that we actually use.

Also, the IPv4 header csum feature is only needed for TX on L3 devices.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The code to fill the IPA length fields is duplicated three times across
the driver:
1. qeth_send_ipa_cmd() sets IPA_CMD_LENGTH, which matches the defaults
   in the IPA_PDU_HEADER template.
2. for OSN, qeth_osn_send_ipa_cmd() bypasses this logic and inserts the
   length passed by the caller.
3. SNMP commands (that can outgrow IPA_CMD_LENGTH) have their own way
   of setting the length fields, via qeth_send_ipa_snmp_cmd().

Consolidate this into qeth_prepare_ipa_cmd(), which all originators of
IPA cmds already call during setup of their cmd. Let qeth_send_ipa_cmd()
pull the length from the cmd instead of hard-coding IPA_CMD_LENGTH.

For now, the SNMP code still needs to fix-up its length fields manually.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qeth_l3_query_arp_cache_info() indicates a data length that's much
larger than the actual length of its request (ie. the value passed to
qeth_get_setassparms_cmd()). The confusion presumably comes from the
fact that the cmd _response_ can be quite large - but that's no concern
for the initial request IO.

Fixing this up allows us to use the generic qeth_send_ipa_cmd()
infrastructure.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Yangbo Lu says:

====================
Add ENETC PTP clock driver

There is same QorIQ 1588 timer IP block on the new ENETC Ethernet
controller with eTSEC/DPAA Ethernet controllers. However it's
different endianness (little-endian) and using PCI driver.

To support ENETC PTP driver, ptp_qoriq driver needed to be
reworked to make functions global for reusing, to add little-
endian support, to add ENETC memory map support, and to add
ENETC dependency for ptp_qoriq driver.

In addition, although ENETC PTP driver is a PCI driver, the dts
node still could be used. Currently the ls1028a dtsi which is
the only platform by now using ENETC is not complete, so there
is still dependency for ENETC PTP node upstreaming. This will
be done in the near future. The hardware timestamping support
for ENETC is done but needs to be reworked with new method in
internal git tree, and will be sent out soon.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When an ethernet frame is padded to meet the minimum ethernet frame
size, the padding octets are not covered by the hardware checksum.
Fortunately the padding octets are usually zero's, which don't affect
checksum. However, it is not guaranteed. For example, switches might
choose to make other use of these octets.
This repeatedly causes kernel hardware checksum fault.

Prior to the cited commit below, skb checksum was forced to be
CHECKSUM_NONE when padding is detected. After it, we need to keep
skb->csum updated. However, fixing up CHECKSUM_COMPLETE requires to
verify and parse IP headers, it does not worth the effort as the packets
are so small that CHECKSUM_COMPLETE has no significant advantage.

Future work: when reporting checksum complete is not an option for
IP non-TCP/UDP packets, we can actually fallback to report checksum
unnecessary, by looking at cqe IPOK bit.

Fixes: 88078d98 ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends")
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch to add enetc_ptp driver into QorIQ PTP list
for maintaining.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to add PTP clock driver for ENETC.
The driver reused QorIQ PTP clock driver.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to add QorIQ PTP support for ENETC.
ENETC PTP driver which is a PCI driver for same
1588 timer IP block will reuse QorIQ PTP driver.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The 1588 timer on eTSEC Ethernet controller uses different
register memory map with DPAA Ethernet controller.
Now the new ENETC Ethernet controller uses same reigster
memory map with DPAA. To support ENETC, let's use register
memory map of DPAA/ENETC in default.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Specify "little-endian" property if the 1588 timer IP block
is little-endian mode. The default endian mode is big-endian.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is QorIQ 1588 timer IP block on the new ENETC Ethernet
controller. However it uses little endian mode which is different
with before. This patch is to add little endian support for the
driver by using "little-endian" dts node property.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Moved QorIQ PTP clock initialization/free into new functions
ptp_qoriq_init()/ptp_qoriq_free(). These functions could also
be reused by ENETC PTP drvier which is a PCI driver for same
1588 timer IP block.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to make functions of ptp operations global,
so that ENETC PTP driver which is a PCI driver for same
1588 timer IP block could reuse them.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Strings containing "ptp_qoriq" or "qoriq_ptp" which were used for
structure/function names were complained by users. Let's just use
the unique "ptp_qoriq" to make these names more consistent.
This patch is just to unify the names using "ptp_qoriq". It hasn't
changed any functions.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are several skb_* functions where the locked and unlocked
functions are confusingly documented. For several of them, the
kernel-doc for the unlocked version is placed above the locked version,
which to the casual reader makes it seems like the locked version "takes
no locks and you must therefore hold required locks before calling it."

One can see, for example, that this link claims to document
skb_queue_head(), while instead describing __skb_queue_head().

https://www.kernel.org/doc/html/latest/networking/kapi.html#c.skb_queue_head

The correct documentation for skb_queue_head() is also included further
down the page.

This diff tested via:

  $ scripts/kernel-doc -rst include/linux/skbuff.h net/core/skbuff.c

No new warnings were seen, and the output makes a little more sense.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
Remove getting SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS

AFAICT there is no code that attempts to get the value of the attribute
SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS while it is used with
switchdev_port_attr_set().

This is effectively no doing anything and it can slow down future work
that tries to make modifications in these areas so remove that.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no code that tries to get the attribute
SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS, remove support for doing that.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no code that attempts to get the
SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS attribute, remove support for that.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no code that will query the SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS
attribute remove support for that.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use new function phy_modify_mmd_changed(), the result speaks for itself.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Addition of tls1.3 support broke tls1.2 handshake when async crypto
accelerator is used. This is because the record type for non-data
records is not propagated to user application. Also when async
decryption happens, the decryption does not stop when two different
types of records get dequeued and submitted for decryption. To address
it, we decrypt tls1.2 non-data records in synchronous way. We check
whether the record we just processed has same type as the previous one
before checking for async condition and jumping to dequeue next record.

Fixes: 130b392c ("net: tls: Add tls 1.3 support")
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>