When CONFIG_DYNAMIC_FTRACE is not set, ftrace_location() is not defined.
If a user (like kprobes) references this function, it will break
the compile when CONFIG_DYNAMIC_FTRACE is not set.

Add ftrace_location() as a nop (return 0) when DYNAMIC_FTRACE
is not defined.

Link: http://lkml.kernel.org/r/20120612225426.961092717@goodmis.orgSigned-off-by: Steven Rostedt <rostedt@goodmis.org>

Break a big critical region into fine-grained pieces at
registering kprobe path. This helps us to solve circular
locking dependency when introducing ftrace-based kprobes.

Link: http://lkml.kernel.org/r/20120605102826.27845.81689.stgit@localhost.localdomain

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Separate probe-able address checking code from
register_kprobe().

Link: http://lkml.kernel.org/r/20120605102820.27845.90133.stgit@localhost.localdomain

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Currently module_mutex is taken before kprobe_mutex, but this
can cause issues when we have kprobes register ftrace, as the ftrace
mutex is taken before enabling a tracepoint, which currently takes
the module mutex.

If module_mutex is taken before kprobe_mutex, then we can not
have kprobes use the ftrace infrastructure.

There seems to be no reason that the kprobe_mutex can't be taken
before the module_mutex. Running lockdep shows that it is safe
among the kernels I've run.

Link: http://lkml.kernel.org/r/20120605102814.27845.21047.stgit@localhost.localdomain

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Add a new filter update interface ftrace_set_filter_ip()
to set ftrace filter by ip address, not only glob pattern.

Link: http://lkml.kernel.org/r/20120605102808.27845.67952.stgit@localhost.localdomain

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Add selftests to test the save-regs functionality of ftrace.

If the arch supports saving regs, then it will make sure that regs is
at least not NULL in the callback.

If the arch does not support saving regs, it makes sure that the
registering of the ftrace_ops that requests saving regs fails.
It then tests the registering of the ftrace_ops succeeds if the
'IF_SUPPORTED' flag is set. Then it makes sure that the regs passed to
the function is NULL.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Add selftests to test the function tracing recursion protection actually
does work. It also tests if a ftrace_ops states it will perform its own
protection. Although, even if the ftrace_ops states it will protect itself,
the ftrace infrastructure may still provide protection if the arch does
not support all features or another ftrace_ops is registered.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

No need to compile in the ftrace selftest helper file if selftests are
not being executed.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

As more users of the function tracer utility are being added, they do
not always add the necessary recursion protection. To protect from
function recursion due to tracing, if the callback ftrace_ops does not
specifically specify that it protects against recursion (by setting
the FTRACE_OPS_FL_RECURSION_SAFE flag), the list operation will be
called by the mcount trampoline which adds recursion protection.

If the flag is set, then the function will be called directly with no
extra protection.

Note, the list operation is called if more than one function callback
is registered, or if the arch does not support all of the function
tracer features.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

The graph caller is called by the mcount callers, which already does
the check against the function_trace_stop variable. No reason to
check it again.

Link: http://lkml.kernel.org/r/20120711195745.588538769@goodmis.orgSigned-off-by: Steven Rostedt <rostedt@goodmis.org>

The final position of the stack after saving regs and setting up
the parameters for ftrace_regs_call, is the position of the pt_regs
needed for the 4th parameter. Instead of saving it into a temporary
reg and pushing the reg, simply push the stack pointer.

Link: http://lkml.kernel.org/r/1342702344.12353.16.camel@gandalf.stny.rr.comReviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Add saving full regs for function tracing on i386.
The saving of regs was influenced by patches sent out by
Masami Hiramatsu.

Link: Link: http://lkml.kernel.org/r/20120711195745.379060003@goodmis.orgReviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Add a way to have different functions calling different trampolines.
If a ftrace_ops wants regs saved on the return, then have only the
functions with ops registered to save regs. Functions registered by
other ops would not be affected, unless the functions overlap.

If one ftrace_ops registered functions A, B and C and another ops
registered fucntions to save regs on A, and D, then only functions
A and D would be saving regs. Function B and C would work as normal.
Although A is registered by both ops: normal and saves regs; this is fine
as saving the regs is needed to satisfy one of the ops that calls it
but the regs are ignored by the other ops function.

x86_64 implements the full regs saving, and i386 just passes a NULL
for regs to satisfy the ftrace_ops passing. Where an arch must supply
both regs and ftrace_ops parameters, even if regs is just NULL.

It is OK for an arch to pass NULL regs. All function trace users that
require regs passing must add the flag FTRACE_OPS_FL_SAVE_REGS when
registering the ftrace_ops. If the arch does not support saving regs
then the ftrace_ops will fail to register. The flag
FTRACE_OPS_FL_SAVE_REGS_IF_SUPPORTED may be set that will prevent the
ftrace_ops from failing to register. In this case, the handler may
either check if regs is not NULL or check if ARCH_SUPPORTS_FTRACE_SAVE_REGS.
If the arch supports passing regs it will set this macro and pass regs
for ops that request them. All other archs will just pass NULL.

Link: Link: http://lkml.kernel.org/r/20120711195745.107705970@goodmis.org

Cc: Alexander van Heukelum <heukelum@fastmail.fm>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Add support of passing the current ftrace_ops into the 3rd parameter
of the callback to the function tracer.

Link: http://lkml.kernel.org/r/20120612225424.942411318@goodmis.orgReviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Return as the 4th paramater to the function tracer callback the pt_regs.

Later patches that implement regs passing for the architectures will require
having the ftrace_ops set the SAVE_REGS flag, which will tell the arch
to take the time to pass a full set of pt_regs to the ftrace_ops callback
function. If the arch does not support it then it should pass NULL.

If an arch can pass full regs, then it should define:
 ARCH_SUPPORTS_FTRACE_SAVE_REGS to 1

Link: http://lkml.kernel.org/r/20120702201821.019966811@goodmis.orgReviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

As the function tracer starts to get more features, the support for
theses features will spread out throughout the different architectures
over time. These features boil down to what each arch does in the
mcount trampoline (the ftrace_caller).

Currently there's two features that are not the same throughout the
archs.

 1) Support to stop function tracing before the callback
 2) passing of the ftrace ops

Both of these require placing an indirect function to support the
features if the mcount trampoline does not.

On a side note, for all architectures, when more than one callback
is registered to the function tracer, an intermediate 'list' function
is called by the mcount trampoline to iterate through the callbacks
that are registered.

Instead of making a separate function for each of these features,
and requiring several indirect calls, just use the single 'list' function
as the intermediate, to handle all cases. If an arch does not support
the 'stop function tracing' or the passing of ftrace ops, just force
it to use the list function that will handle the features required.

This makes the code cleaner and simpler and removes a lot of
 #ifdefs in the code.

Link: http://lkml.kernel.org/r/20120612225424.495625483@goodmis.orgReviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Currently the function trace callback receives only the ip and parent_ip
of the function that it traced. It would be more powerful to also return
the ops that registered the function as well. This allows the same function
to act differently depending on what ftrace_ops registered it.

Link: http://lkml.kernel.org/r/20120612225424.267254552@goodmis.orgReviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Merge branch 'tip/perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace into perf/core

Pull tracing fix from Steve Rostedt.
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Pick up the latest ring-buffer fixes, before applying a new fix.
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Pull networking fixes from David Miller:

 1) IPVS oops'ers:
   a) Should not reset skb->nf_bridge in forwarding hook (Lin Ming)
   b) 3.4 commit can cause ip_vs_control_cleanup to be invoked after
      the ipvs_core_ops are unregistered during rmmod (Julian ANastasov)

 2) ixgbevf bringup failure can crash in TX descriptor cleanup
    (Alexander Duyck)

 3) AX25 switch missing break statement hoses ROSE sockets (Alan Cox)

 4) CAIF accesses freed per-net memory (Sjur Brandeland)

 5) Network cgroup code has out-or-bounds accesses (Eric DUmazet), and
    accesses freed memory (Gao Feng)

 6) Fix a crash in SCTP reported by Dave Jones caused by freeing an
    association still on a list (Neil HOrman)

 7) __netdev_alloc_skb() regresses on GFP_DMA using drivers because that
    GFP flag is not being retained for the allocation (Eric Dumazet).

 8) Missing NULL hceck in sch_sfb netlink message parsing (Alan Cox)

 9) bnx2 crashes because TX index iteration is not bounded correctly
    (Michael Chan)

10) IPoIB generates warnings in TCP queue collapsing (via
    skb_try_coalesce) because it does not set skb->truesize correctly
    (Eric Dumazet)

11) vlan_info objects leak for the implicit vlan with ID 0 (Amir
    Hanania)

12) A fix for TX time stamp handling in gianfar does not transfer socket
    ownership from one packet to another correctly, resulting in a
    socket write space imbalance (Eric Dumazet)

13) Julia Lawall found several cases where we do a list iteration, and
    then at the loop termination unconditionally assume we ended up with
    real list object, rather than the list head itself (CNIC, RXRPC,
    mISDN).

14) The bonding driver handles procfs moving incorrectly when a device
    it manages is moved from one namespace to another (Eric Biederman)

15) Missing memory barriers in stmmac descriptor accesses result in
    various crashes (Deepak Sikri)

16) Fix handling of broadcast packets in batman-adv (Simon Wunderlich)

17) Properly check the sanity of sendmsg() lengths in ieee802154's
    dgram_sendmsg().  Dave Jones and others have hit and reported this
    bug (Sasha Levin)

18) Some drivers (b44 and b43legacy) on 64-bit machines stopped working
    because of how netdev_alloc_skb() was adjusted.  Such drivers should
    now use alloc_skb() for obtaining bounce buffers.  (Eric Dumazet)

19) atl1c mis-managed it's link state in that it stops the queue by hand
    on link down.  The generic networking takes care of that and this
    double stop locks the queue down.  So simply removing the driver's
    queue stop call fixes the problem (Cloud Ren)

20) Fix out-of-memory due to mis-accounting in net_em packet scheduler
    (Eric Dumazet)

21) If DCB and SR-IOV are configured at the same time in IXGBE the chip
    will hang because this is not supported (Alexander Duyck)

22) A commit to stop drivers using netdev->base_addr broke the CNIC
    driver (Michael Chan)

23) Timeout regression in ipset caused by an attempt to fix an overflow
    bug (Jozsef Kadlecsik).

24) mac80211 minstrel code allocates memory using incorrect size
    (Thomas Huehn)

25) llcp_sock_getname() needs to check for a NULL device otherwise we
    OOPS (Sasha Levin)

26) mwifiex leaks memory (Bing Zhao)

27) Propagate iwlwifi fix to iwlegacy, even when we're not associated
    we need to monitor for stuck queues in the watchdog handler
    (Stanislaw Geuszka)

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits)
  ipvs: fix oops in ip_vs_dst_event on rmmod
  ipvs: fix oops on NAT reply in br_nf context
  ixgbevf: Fix panic when loading driver
  ax25: Fix missing break
  MAINTAINERS: reflect actual changes in IEEE 802.15.4 maintainership
  caif: Fix access to freed pernet memory
  net: cgroup: fix access the unallocated memory in netprio cgroup
  ixgbevf: Prevent RX/TX statistics getting reset to zero
  sctp: Fix list corruption resulting from freeing an association on a list
  net: respect GFP_DMA in __netdev_alloc_skb()
  e1000e: fix test for PHY being accessible on 82577/8/9 and I217
  e1000e: Correct link check logic for 82571 serdes
  sch_sfb: Fix missing NULL check
  bnx2: Fix bug in bnx2_free_tx_skbs().
  IPoIB: fix skb truesize underestimatiom
  net: Fix memory leak - vlan_info struct
  gianfar: fix potential sk_wmem_alloc imbalance
  drivers/net/ethernet/broadcom/cnic.c: remove invalid reference to list iterator variable
  net/rxrpc/ar-peer.c: remove invalid reference to list iterator variable
  drivers/isdn/mISDN/stack.c: remove invalid reference to list iterator variable
  ...

Pull rpmsg fix from Ohad Ben-Cohen:
 "A single rpmsg fix for 3.5, coming from Federico Fuga, which
  eliminates the dependency on arbitrary initialization orders."

* tag 'single-rpmsg-3.5-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/rpmsg:
  rpmsg: fix dependency on initialization order

Pull CMA and DMA-mapping fixes from Marek Szyprowski:
 "Another set of minor fixups for recently merged Contiguous Memory
  Allocator and ARM DMA-mapping changes.  Those patches fix mysterious
  crashes on systems with CMA and Himem enabled as well as some corner
  cases caused by typical off-by-one bug."

* 'fixes-for-linus' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  ARM: dma-mapping: modify condition check while freeing pages
  mm: cma: fix condition check when setting global cma area
  mm: cma: don't replace lowmem pages with highmem

Pablo Neira Ayuso says:

====================
I know that we're in fairly late stage to request pulls, but the IPVS people
pinged me with little patches with oops fixes last week.

One of them was recently introduced (during the 3.4 development cycle) while
cleaning up the IPVS netns support. They are:

* Fix one regression introduced in 3.4 while cleaning up the
  netns support for IPVS, from Julian Anastasov.

* Fix one oops triggered due to resetting the conntrack attached to the skb
  instead of just putting it in the forward hook, from Lin Ming. This problem
  seems to be there since 2.6.37 according to Simon Horman.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When rpmsg drivers are built into the kernel, they must not initialize
before the rpmsg bus does, otherwise they'd trigger a BUG() in
drivers/base/driver.c line 169 (driver_register()).

To fix that, and to stop depending on arbitrary linkage ordering of
those built-in rpmsg drivers, we make the rpmsg bus initialize at
subsys_initcall.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Federico Fuga <fuga@studiofuga.com>
[ohad: rewrite the commit log]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>

	After commit 39f618b4 (3.4)
"ipvs: reset ipvs pointer in netns" we can oops in
ip_vs_dst_event on rmmod ip_vs because ip_vs_control_cleanup
is called after the ipvs_core_ops subsys is unregistered and
net->ipvs is NULL. Fix it by exiting early from ip_vs_dst_event
if ipvs is NULL. It is safe because all services and dests
for the net are already freed.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

IPVS should not reset skb->nf_bridge in FORWARD hook
by calling nf_reset for NAT replies. It triggers oops in
br_nf_forward_finish.

[  579.781508] BUG: unable to handle kernel NULL pointer dereference at 0000000000000004
[  579.781669] IP: [<ffffffff817b1ca5>] br_nf_forward_finish+0x58/0x112
[  579.781792] PGD 218f9067 PUD 0
[  579.781865] Oops: 0000 [#1] SMP
[  579.781945] CPU 0
[  579.781983] Modules linked in:
[  579.782047]
[  579.782080]
[  579.782114] Pid: 4644, comm: qemu Tainted: G        W    3.5.0-rc5-00006-g95e69f9 #282 Hewlett-Packard  /30E8
[  579.782300] RIP: 0010:[<ffffffff817b1ca5>]  [<ffffffff817b1ca5>] br_nf_forward_finish+0x58/0x112
[  579.782455] RSP: 0018:ffff88007b003a98  EFLAGS: 00010287
[  579.782541] RAX: 0000000000000008 RBX: ffff8800762ead00 RCX: 000000000001670a
[  579.782653] RDX: 0000000000000000 RSI: 000000000000000a RDI: ffff8800762ead00
[  579.782845] RBP: ffff88007b003ac8 R08: 0000000000016630 R09: ffff88007b003a90
[  579.782957] R10: ffff88007b0038e8 R11: ffff88002da37540 R12: ffff88002da01a02
[  579.783066] R13: ffff88002da01a80 R14: ffff88002d83c000 R15: ffff88002d82a000
[  579.783177] FS:  0000000000000000(0000) GS:ffff88007b000000(0063) knlGS:00000000f62d1b70
[  579.783306] CS:  0010 DS: 002b ES: 002b CR0: 000000008005003b
[  579.783395] CR2: 0000000000000004 CR3: 00000000218fe000 CR4: 00000000000027f0
[  579.783505] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  579.783684] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  579.783795] Process qemu (pid: 4644, threadinfo ffff880021b20000, task ffff880021aba760)
[  579.783919] Stack:
[  579.783959]  ffff88007693cedc ffff8800762ead00 ffff88002da01a02 ffff8800762ead00
[  579.784110]  ffff88002da01a02 ffff88002da01a80 ffff88007b003b18 ffffffff817b26c7
[  579.784260]  ffff880080000000 ffffffff81ef59f0 ffff8800762ead00 ffffffff81ef58b0
[  579.784477] Call Trace:
[  579.784523]  <IRQ>
[  579.784562]
[  579.784603]  [<ffffffff817b26c7>] br_nf_forward_ip+0x275/0x2c8
[  579.784707]  [<ffffffff81704b58>] nf_iterate+0x47/0x7d
[  579.784797]  [<ffffffff817ac32e>] ? br_dev_queue_push_xmit+0xae/0xae
[  579.784906]  [<ffffffff81704bfb>] nf_hook_slow+0x6d/0x102
[  579.784995]  [<ffffffff817ac32e>] ? br_dev_queue_push_xmit+0xae/0xae
[  579.785175]  [<ffffffff8187fa95>] ? _raw_write_unlock_bh+0x19/0x1b
[  579.785179]  [<ffffffff817ac417>] __br_forward+0x97/0xa2
[  579.785179]  [<ffffffff817ad366>] br_handle_frame_finish+0x1a6/0x257
[  579.785179]  [<ffffffff817b2386>] br_nf_pre_routing_finish+0x26d/0x2cb
[  579.785179]  [<ffffffff817b2cf0>] br_nf_pre_routing+0x55d/0x5c1
[  579.785179]  [<ffffffff81704b58>] nf_iterate+0x47/0x7d
[  579.785179]  [<ffffffff817ad1c0>] ? br_handle_local_finish+0x44/0x44
[  579.785179]  [<ffffffff81704bfb>] nf_hook_slow+0x6d/0x102
[  579.785179]  [<ffffffff817ad1c0>] ? br_handle_local_finish+0x44/0x44
[  579.785179]  [<ffffffff81551525>] ? sky2_poll+0xb35/0xb54
[  579.785179]  [<ffffffff817ad62a>] br_handle_frame+0x213/0x229
[  579.785179]  [<ffffffff817ad417>] ? br_handle_frame_finish+0x257/0x257
[  579.785179]  [<ffffffff816e3b47>] __netif_receive_skb+0x2b4/0x3f1
[  579.785179]  [<ffffffff816e69fc>] process_backlog+0x99/0x1e2
[  579.785179]  [<ffffffff816e6800>] net_rx_action+0xdf/0x242
[  579.785179]  [<ffffffff8107e8a8>] __do_softirq+0xc1/0x1e0
[  579.785179]  [<ffffffff8135a5ba>] ? trace_hardirqs_off_thunk+0x3a/0x6c
[  579.785179]  [<ffffffff8188812c>] call_softirq+0x1c/0x30

The steps to reproduce as follow,

1. On Host1, setup brige br0(192.168.1.106)
2. Boot a kvm guest(192.168.1.105) on Host1 and start httpd
3. Start IPVS service on Host1
   ipvsadm -A -t 192.168.1.106:80 -s rr
   ipvsadm -a -t 192.168.1.106:80 -r 192.168.1.105:80 -m
4. Run apache benchmark on Host2(192.168.1.101)
   ab -n 1000 http://192.168.1.106/

ip_vs_reply4
  ip_vs_out
    handle_response
      ip_vs_notrack
        nf_reset()
        {
          skb->nf_bridge = NULL;
        }

Actually, IPVS wants in this case just to replace nfct
with untracked version. So replace the nf_reset(skb) call
in ip_vs_notrack() with a nf_conntrack_put(skb->nfct) call.
Signed-off-by: Lin Ming <mlin@ss.pku.edu.cn>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This patch addresses a kernel panic seen when setting up the interface.
Specifically we see a NULL pointer dereference on the Tx descriptor cleanup
path when enabling interrupts.  This change corrects that so it cannot
occur.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

At least there seems to be no reason to disallow ROSE sockets when
NETROM is loaded.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As the life flows, developers priorities shifts a bit. Reflect actual
changes in the maintainership of IEEE 802.15.4 code: Sergey mostly
stopped cared about this piece of code. Most of the work recently was
done by Alexander, so put him to the MAINTAINERS file to reflect his
status and to ease the life of respective patches.

Also add new net/mac802154/ directory to the list of maintained files.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
This series contains fixes to e1000e.
 ...
Bruce Allan (1):
  e1000e: fix test for PHY being accessible on 82577/8/9 and I217

Tushar Dave (1):
  e1000e: Correct link check logic for 82571 serdes
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

unregister_netdevice_notifier() must be called before
unregister_pernet_subsys() to avoid accessing already freed
pernet memory. This fixes the following oops when doing rmmod:

Call Trace:
 [<ffffffffa0f802bd>] caif_device_notify+0x4d/0x5a0 [caif]
 [<ffffffff81552ba9>] unregister_netdevice_notifier+0xb9/0x100
 [<ffffffffa0f86dcc>] caif_device_exit+0x1c/0x250 [caif]
 [<ffffffff810e7734>] sys_delete_module+0x1a4/0x300
 [<ffffffff810da82d>] ? trace_hardirqs_on_caller+0x15d/0x1e0
 [<ffffffff813517de>] ? trace_hardirqs_on_thunk+0x3a/0x3
 [<ffffffff81696bad>] system_call_fastpath+0x1a/0x1f

RIP
 [<ffffffffa0f7f561>] caif_get+0x51/0xb0 [caif]
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

there are some out of bound accesses in netprio cgroup.

now before accessing the dev->priomap.priomap array,we only check
if the dev->priomap exist.and because we don't want to see
additional bound checkings in fast path, so we should make sure
that dev->priomap is null or array size of dev->priomap.priomap
is equal to max_prioidx + 1;

so in write_priomap logic,we should call extend_netdev_table when
dev->priomap is null and dev->priomap.priomap_len < max_len.
and in cgrp_create->update_netdev_tables logic,we should call
extend_netdev_table only when dev->priomap exist and
dev->priomap.priomap_len < max_len.

and it's not needed to call update_netdev_tables in write_priomap,
we can only allocate the net device's priomap which we change through
net_prio.ifpriomap.

this patch also add a return value for update_netdev_tables &
extend_netdev_table, so when new_priomap is allocated failed,
write_priomap will stop to access the priomap,and return -ENOMEM
back to the userspace to tell the user what happend.

Change From v3:
1. add rtnl protect when reading max_prioidx in write_priomap.

2. only call extend_netdev_table when map->priomap_len < max_len,
   this will make sure array size of dev->map->priomap always
   bigger than any prioidx.

3. add a function write_update_netdev_table to make codes clear.

Change From v2:
1. protect extend_netdev_table by RTNL.
2. when extend_netdev_table failed,call dev_put to reduce device's refcount.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Eric Dumazet <edumazet@google.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The commit 4197aa7b implements 64 bit
per ring statistics. But the driver resets the 'total_bytes' and
'total_packets' from RX and TX rings in the RX and TX interrupt
handlers to zero. This results in statistics being lost and user space
reporting RX and TX statistics as zero. This patch addresses the
issue by preventing the resetting of RX and TX ring statistics to
zero.
Signed-off-by: Narendra K <narendra_k@dell.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A few days ago Dave Jones reported this oops:

[22766.294255] general protection fault: 0000 [#1] PREEMPT SMP
[22766.295376] CPU 0
[22766.295384] Modules linked in:
[22766.387137]  ffffffffa169f292 6b6b6b6b6b6b6b6b ffff880147c03a90
ffff880147c03a74
[22766.387135] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 00000000000
[22766.387136] Process trinity-watchdo (pid: 10896, threadinfo ffff88013e7d2000,
[22766.387137] Stack:
[22766.387140]  ffff880147c03a10
[22766.387140]  ffffffffa169f2b6
[22766.387140]  ffff88013ed95728
[22766.387143]  0000000000000002
[22766.387143]  0000000000000000
[22766.387143]  ffff880003fad062
[22766.387144]  ffff88013c120000
[22766.387144]
[22766.387145] Call Trace:
[22766.387145]  <IRQ>
[22766.387150]  [<ffffffffa169f292>] ? __sctp_lookup_association+0x62/0xd0
[sctp]
[22766.387154]  [<ffffffffa169f2b6>] __sctp_lookup_association+0x86/0xd0 [sctp]
[22766.387157]  [<ffffffffa169f597>] sctp_rcv+0x207/0xbb0 [sctp]
[22766.387161]  [<ffffffff810d4da8>] ? trace_hardirqs_off_caller+0x28/0xd0
[22766.387163]  [<ffffffff815827e3>] ? nf_hook_slow+0x133/0x210
[22766.387166]  [<ffffffff815902fc>] ? ip_local_deliver_finish+0x4c/0x4c0
[22766.387168]  [<ffffffff8159043d>] ip_local_deliver_finish+0x18d/0x4c0
[22766.387169]  [<ffffffff815902fc>] ? ip_local_deliver_finish+0x4c/0x4c0
[22766.387171]  [<ffffffff81590a07>] ip_local_deliver+0x47/0x80
[22766.387172]  [<ffffffff8158fd80>] ip_rcv_finish+0x150/0x680
[22766.387174]  [<ffffffff81590c54>] ip_rcv+0x214/0x320
[22766.387176]  [<ffffffff81558c07>] __netif_receive_skb+0x7b7/0x910
[22766.387178]  [<ffffffff8155856c>] ? __netif_receive_skb+0x11c/0x910
[22766.387180]  [<ffffffff810d423e>] ? put_lock_stats.isra.25+0xe/0x40
[22766.387182]  [<ffffffff81558f83>] netif_receive_skb+0x23/0x1f0
[22766.387183]  [<ffffffff815596a9>] ? dev_gro_receive+0x139/0x440
[22766.387185]  [<ffffffff81559280>] napi_skb_finish+0x70/0xa0
[22766.387187]  [<ffffffff81559cb5>] napi_gro_receive+0xf5/0x130
[22766.387218]  [<ffffffffa01c4679>] e1000_receive_skb+0x59/0x70 [e1000e]
[22766.387242]  [<ffffffffa01c5aab>] e1000_clean_rx_irq+0x28b/0x460 [e1000e]
[22766.387266]  [<ffffffffa01c9c18>] e1000e_poll+0x78/0x430 [e1000e]
[22766.387268]  [<ffffffff81559fea>] net_rx_action+0x1aa/0x3d0
[22766.387270]  [<ffffffff810a495f>] ? account_system_vtime+0x10f/0x130
[22766.387273]  [<ffffffff810734d0>] __do_softirq+0xe0/0x420
[22766.387275]  [<ffffffff8169826c>] call_softirq+0x1c/0x30
[22766.387278]  [<ffffffff8101db15>] do_softirq+0xd5/0x110
[22766.387279]  [<ffffffff81073bc5>] irq_exit+0xd5/0xe0
[22766.387281]  [<ffffffff81698b03>] do_IRQ+0x63/0xd0
[22766.387283]  [<ffffffff8168ee2f>] common_interrupt+0x6f/0x6f
[22766.387283]  <EOI>
[22766.387284]
[22766.387285]  [<ffffffff8168eed9>] ? retint_swapgs+0x13/0x1b
[22766.387285] Code: c0 90 5d c3 66 0f 1f 44 00 00 4c 89 c8 5d c3 0f 1f 00 55 48
89 e5 48 83
ec 20 48 89 5d e8 4c 89 65 f0 4c 89 6d f8 66 66 66 66 90 <0f> b7 87 98 00 00 00
48 89 fb
49 89 f5 66 c1 c0 08 66 39 46 02
[22766.387307]
[22766.387307] RIP
[22766.387311]  [<ffffffffa168a2c9>] sctp_assoc_is_match+0x19/0x90 [sctp]
[22766.387311]  RSP <ffff880147c039b0>
[22766.387142]  ffffffffa16ab120
[22766.599537] ---[ end trace 3f6dae82e37b17f5 ]---
[22766.601221] Kernel panic - not syncing: Fatal exception in interrupt

It appears from his analysis and some staring at the code that this is likely
occuring because an association is getting freed while still on the
sctp_assoc_hashtable.  As a result, we get a gpf when traversing the hashtable
while a freed node corrupts part of the list.

Nominally I would think that an mibalanced refcount was responsible for this,
but I can't seem to find any obvious imbalance.  What I did note however was
that the two places where we create an association using
sctp_primitive_ASSOCIATE (__sctp_connect and sctp_sendmsg), have failure paths
which free a newly created association after calling sctp_primitive_ASSOCIATE.
sctp_primitive_ASSOCIATE brings us into the sctp_sf_do_prm_asoc path, which
issues a SCTP_CMD_NEW_ASOC side effect, which in turn adds a new association to
the aforementioned hash table.  the sctp command interpreter that process side
effects has not way to unwind previously processed commands, so freeing the
association from the __sctp_connect or sctp_sendmsg error path would lead to a
freed association remaining on this hash table.

I've fixed this but modifying sctp_[un]hash_established to use hlist_del_init,
which allows us to proerly use hlist_unhashed to check if the node is on a
hashlist safely during a delete.  That in turn alows us to safely call
sctp_unhash_established in the __sctp_connect and sctp_sendmsg error paths
before freeing them, regardles of what the associations state is on the hash
list.

I noted, while I was doing this, that the __sctp_unhash_endpoint was using
hlist_unhsashed in a simmilar fashion, but never nullified any removed nodes
pointers to make that function work properly, so I fixed that up in a simmilar
fashion.

I attempted to test this using a virtual guest running the SCTP_RR test from
netperf in a loop while running the trinity fuzzer, both in a loop.  I wasn't
able to recreate the problem prior to this fix, nor was I able to trigger the
failure after (neither of which I suppose is suprising).  Given the trace above
however, I think its likely that this is what we hit.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: davej@redhat.com
CC: davej@redhat.com
CC: "David S. Miller" <davem@davemloft.net>
CC: Vlad Yasevich <vyasevich@gmail.com>
CC: Sridhar Samudrala <sri@us.ibm.com>
CC: linux-sctp@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge gma500 patches from Alan Cox.

* Merge emailed patches from Alan Cox <alan@lxorguk.ukuu.org.uk>: (3 commits)
  gma500,cdv: Fix the brightness base
  gma500: move the ASLE enable
  gma500: Fix lid related crash

Pull xfs regression fixes from Ben Myers:
 - Really fix a cursor leak in xfs_alloc_ag_vextent_near
 - Fix a performance regression related to doing allocation in
   workqueues
 - Prevent recursion in xfs_buf_iorequest which is causing stack
   overflows
 - Don't call xfs_bdstrat_cb in xfs_buf_iodone callbacks

* tag 'for-linus-v3.5-rc7' of git://oss.sgi.com/xfs/xfs:
  xfs: do not call xfs_bdstrat_cb in xfs_buf_iodone_callbacks
  xfs: prevent recursion in xfs_buf_iorequest
  xfs: don't defer metadata allocation to the workqueue
  xfs: really fix the cursor leak in xfs_alloc_ag_vextent_near

The leap second rework unearthed another issue of inconsistent data.

On timekeeping_resume() the timekeeper data is updated, but nothing
calls timekeeping_update(), so now the update code in the timer
interrupt sees stale values.

This has been the case before those changes, but then the timer
interrupt was using stale data as well so this went unnoticed for quite
some time.

Add the missing update call, so all the data is consistent everywhere.
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Reported-and-tested-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Reported-and-tested-by: Martin Steigerwald <Martin@lichtvoll.de>
Cc: LKML <linux-kernel@vger.kernel.org>
Cc: Linux PM list <linux-pm@vger.kernel.org>
Cc: John Stultz <johnstul@us.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>,
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Some desktop environments carefully save and restore the brightness
settings from the previous boot.  Unfortunately they don't all check to
see if the range has changed.  The end result is that they restore a
brightness of 100/lots not 100/100.

As the old driver and the non-free GMA36xx driver both use 0-100 we thus
need to go back doing the same thing to avoid users getting a mysterious
black screen after boot.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Otherwise we end up getting the masks wrong, can get events before we
are doing power control and other ungood things.  Again this is a
regression fix where the ordering of handling was disturbed by other
work, and the user experience on some boxes is a blank screen.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We now set up the lid timer before we set up the backlight.  On some
devices that causes a crash as we do a backlight change before or during
the setup.

As this fixes a crash on boot regression on some setups it ought to go
in ASAP, especially as all the user gets is a blank screen.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Tested-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>