Increase the size of the buffers used for composing the names used for
the transport debugfs entries and the vector name to avoid a potential
truncation.

This resolves the following errors when compiling the driver with W=1
and KCFLAGS=-Werror on GCC 12.3.1:

    drivers/crypto/intel/qat/qat_common/adf_transport_debug.c: In function ‘adf_ring_debugfs_add’:
    drivers/crypto/intel/qat/qat_common/adf_transport_debug.c:100:60: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
    drivers/crypto/intel/qat/qat_common/adf_isr.c: In function ‘adf_isr_resource_alloc’:
    drivers/crypto/intel/qat/qat_common/adf_isr.c:197:47: error: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size between 0 and 5 [-Werror=format-truncation=]

Fixes: a672a9dc ("crypto: qat - Intel(R) QAT transport code")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

key buffer is not copied in chachapoly_setkey function,
results in wrong output for encryption/decryption operation.

fix this by memcpy the key in caam_ctx key arrary

Fixes: d6bbd4ee ("crypto: caam/jr - add support for Chacha20 + Poly1305")
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The oversampling rate used by the Jitter RNG allows the configuration of
the heuristically implied entropy in one timing measurement. This
entropy rate is (1 / OSR) bits of entropy per time stamp.

Considering that the Jitter RNG now support APT/RCT health tests for
different OSRs, allow this value to be configured at compile time to
support systems with limited amount of entropy in their timer.

The allowed range of OSR values complies with the APT/RCT cutoff health
test values which range from 1 through 15.

The default value of the OSR selection support is left at 1 which is the
current default. Thus, the addition of the configuration support does
not alter the default Jitter RNG behavior.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The memory size consumed by the Jitter RNG is one contributing factor in
the amount of entropy that is gathered. As the amount of entropy
directly correlates with the distance of the memory from the CPU, the
caches that are possibly present on a given system have an impact on the
collected entropy.

Thus, the kernel compile time should offer a means to configure the
amount of memory used by the Jitter RNG. Although this option could be
turned into a runtime option (e.g. a kernel command line option), it
should remain a compile time option as otherwise adminsitrators who may
not have performed an entropy assessment may select a value that is
inappropriate.

The default value selected by the configuration is identical to the
current Jitter RNG value. Thus, the patch should not lead to any change
in the Jitter RNG behavior.

To accommodate larger memory buffers, kvzalloc / kvfree is used.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The oversampling rate (OSR) value specifies the heuristically implied
entropy in the recorded data - H_submitter = 1/osr. A different entropy
estimate implies a different APT/RCT cutoff value. This change adds
support for OSRs 1 through 15. This OSR can be selected by the caller
of the Jitter RNG.

For this patch, the caller still uses one hard-coded OSR. A subsequent
patch allows this value to be configured.

In addition, the power-up self test is adjusted as follows:

* It allows the caller to provide an oversampling rate that should be
tested with - commonly it should be the same as used for the actual
runtime operation. This makes the power-up testing therefore consistent
with the runtime operation.

* It calls now jent_measure_jitter (i.e. collects the full entropy
that can possibly be harvested by the Jitter RNG) instead of only
jent_condition_data (which only returns the entropy harvested from
the conditioning component). This should now alleviate reports where
the Jitter RNG initialization thinks there is too little entropy.

* The power-up test now solely relies on the (enhanced) APT and RCT
test that is used as a health test at runtime.

The code allowing the different OSRs as well as the power-up test
changes are present in the user space version of the Jitter RNG 3.4.1
and thus was already in production use for some time.

Reported-by "Ospan, Abylay" <aospan@amazon.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

key buffer is not copied in chachapoly_setkey function,
results in wrong output for encryption/decryption operation.

fix this by memcpy the key in caam_ctx key arrary

Fixes: c10a5336 ("crypto: caam/qi2 - add support for Chacha20 + Poly1305")
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Implement stm32_rng_suspend()/stm32_rng_resume() low-power APIs
called when the hardware block context will be lost.

There is no need to save the RNG_CR register in
stm32_rng_runtime_suspend() as the context is not lost. Therefore,
only enable/disable the RNG in the runtime sequences.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

If "st,rng-lock-conf" DT binding property is set for a stm32-rng node,
the RNG configuration will be locked until next hardware block reset
or platform reset.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

For NIST certification the noise source sampling may need to be
restrained.

This change implements an algorithm that gets the rate of the RNG
clock and apply the correct value in CLKDIV field in RNG_CR register
to force the RNG clock rate to be "max_clock_rate" maximum.

As it is platform-specific, implement it as a compat data.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Try to conceal seed errors when possible. If, despite the error
concealing tries, a seed error is still present, then return an error.

A clock error does not compromise the hardware block and data can
still be read from RNG_DR. Just warn that the RNG clock is too slow
and clear RNG_SR.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The RNG driver should be capable of recovering from an error. Implement
an error concealment API. This avoids irrecoverable RNG state.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The RNG present on STM32MP13x platforms introduces a customizable
configuration and the conditional reset.

STM32 RNG configuration should best fit the requirements of the
platform. Therefore, put a platform-specific RNG configuration
field in the platform data. Default RNG configuration for STM32MP13
is the NIST certified configuration [1].

While there, fix and the RNG init sequence to support all RNG
versions.

[1] https://csrc.nist.gov/projects/cryptographic-module-validation-program/entropy-validations/certificate/53Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use devm_platform_get_and_ioremap_resource() to get and ioremap a
resource.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Introduce st,stm32mp13-rng compatible and add st,rng-lock-conf.

If st,rng-lock-conf is set, the RNG configuration in RNG_CR, RNG_HTCR
and RNG_NSCR will be locked. It is supported starting from the RNG
version present in the STM32MP13
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Select CRYPTO_AEAD so that crypto_has_aead is available.

Fixes: 1383e2ab102c ("ipsec: Stop using crypto_has_alg")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309202112.33V1Ezb1-lkp@intel.com/Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add the compatible string for QCom ICE on sa8775p SoCs.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

x86 optimized crypto modules are built as modules rather than build-in and
they are not loaded when the crypto API is initialized, resulting in the
generic builtin module (sha1-generic) being used instead.

It was discovered when creating a sha1/sha256 checksum of a 2Gb file by
using kcapi-tools because it would take significantly longer than creating
a sha512 checksum of the same file. trace-cmd showed that for sha1/256 the
generic module was used, whereas for sha512 the optimized module was used
instead.

Add module aliases() for these x86 optimized crypto modules based on CPU
feature bits so udev gets a chance to load them later in the boot
process. This resulted in ~3x decrease in the real-time execution of
kcapi-dsg.

Fix is inspired from commit
aa031b8f ("crypto: x86/sha512 - load based on CPU features")
where a similar fix was done for sha512.

Cc: stable@vger.kernel.org # 5.15+
Suggested-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Suggested-by: Julian Andres Klode <julian.klode@canonical.com>
Signed-off-by: Roxana Nicolescu <roxana.nicolescu@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

When sec_aead_mac_init returns an error code, sec_cipher_map
will exit abnormally, the hardware sgl should be unmmaped.
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

QAT GEN4 devices support chained compression operations. These
allow, with a single request to firmware, to hash then compress
data.

Extend the configuration to enable such mode. The cfg_services
operations in sysfs are extended to allow the string "dcc". When
selected, the driver downloads to the device both the symmetric
crypto and the compression firmware images and sends an admin message
to firmware which enables `chained` operations.
In addition, it sets the device's capabilities as the combination
of compression and symmetric crypto capabilities, while excluding
the ICP_ACCEL_CAPABILITIES_CRYPTO_SYMMETRIC bit to indicate
that in this mode, symmetric crypto instances are not supported.

When "dcc" is enabled, the device will handle compression requests
as if the "dc" configuration is loaded ("dcc" is a variation of "dc")
and the driver will register the acomp algorithms.

As for the other extended configurations, "dcc" is only available for
qat_4xxx devices and the chaining service will be only accessible from
user space.
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The data structure that associates a service id with its name is
replicated across the driver.
Remove duplication by moving this data structure to a new include file,
adf_cfg_services.h in order to have consistency across the drivers.

Note that the data structure is re-instantiated every time the new
include is added to a compilation unit.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The function adf_dev_init(), through the subsystem qat_compression,
populates the list of list of compression instances
accel_dev->compression_list. If the list of instances is not empty,
the function adf_dev_start() will then call qat_compression_registers()
register the compression algorithms into the crypto framework.

If any of the functions in adf_dev_start() fail, the caller of such
function, in the error path calls adf_dev_down() which in turn call
adf_dev_stop() and adf_dev_shutdown(), see for example the function
state_store in adf_sriov.c.
However, if the registration of compression algorithms is not done,
adf_dev_stop() will try to unregister the algorithms regardless.
This might cause the counter active_devs in qat_compression.c to get
to a negative value.

Add a new state, ADF_STATUS_COMPRESSION_ALGS_REGISTERED, which tracks
if the compression algorithms are registered into the crypto framework.
Then use this to unregister the algorithms if such flag is set. This
ensures that the compression algorithms are only unregistered if
previously registered.

Fixes: 1198ae56 ("crypto: qat - expose deflate through acomp api for QAT GEN2")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The function adf_dev_init(), through the subsystem qat_crypto, populates
the list of list of crypto instances accel_dev->crypto_list.
If the list of instances is not empty, the function adf_dev_start() will
then call qat_algs_registers() and qat_asym_algs_register() to register
the crypto algorithms into the crypto framework.

If any of the functions in adf_dev_start() fail, the caller of such
function, in the error path calls adf_dev_down() which in turn call
adf_dev_stop() and adf_dev_shutdown(), see for example the function
state_store in adf_sriov.c.
However, if the registration of crypto algorithms is not done,
adf_dev_stop() will try to unregister the algorithms regardless.
This might cause the counter active_devs in qat_algs.c and
qat_asym_algs.c to get to a negative value.

Add a new state, ADF_STATUS_CRYPTO_ALGS_REGISTERED, which tracks if the
crypto algorithms are registered into the crypto framework. Then use
this to unregister the algorithms if such flag is set. This ensures that
the crypto algorithms are only unregistered if previously registered.

Fixes: d8cba25d ("crypto: qat - Intel(R) QAT driver framework")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

If the device is already in the up state, a subsequent write of `up` to
the sysfs attribute /sys/bus/pci/devices/<BDF>/qat/state brings the
device down.
Fix this behaviour by ignoring subsequent `up` commands if the device is
already in the up state.

Fixes: 1bdc8555 ("crypto: qat - fix concurrency issue when device state changes")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Do not shadow the return code from adf_dev_down() in the error path of
the DEV_DOWN command.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Commit 1bdc8555 ("crypto: qat - fix concurrency issue when device
state changes") introduced the function adf_dev_down() which wraps the
functions adf_dev_stop() and adf_dev_shutdown().
In a subsequent change, the sequence adf_dev_stop() followed by
adf_dev_shutdown() was then replaced across the driver with just a call
to the function adf_dev_down().

The functions adf_dev_stop() and adf_dev_shutdown() are called in error
paths to stop the accelerator and free up resources and can be called
even if the counterparts adf_dev_init() and adf_dev_start() did not
complete successfully.
However, the implementation of adf_dev_down() prevents the stop/shutdown
sequence if the device is found already down.
For example, if adf_dev_init() fails, the device status is not set as
started and therefore a call to adf_dev_down() won't be calling
adf_dev_shutdown() to undo what adf_dev_init() did.

Do not check if a device is started in adf_dev_down() but do the
equivalent check in adf_sysfs.c when handling a DEV_DOWN command from
the user.

Fixes: 2b60f79c ("crypto: qat - replace state machine calls")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove the support of zlib-deflate and gzip.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add the deflate algorithm support for hisilicon zip hardware.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Replace the existing skcipher CBC template with an lskcipher version.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch adds two different implementations of ECB.  First of
all an lskcipher wrapper around existing ciphers is introduced as
a temporary transition aid.

Secondly a permanent lskcipher template is also added.  It's simply
a wrapper around the underlying lskcipher algorithm.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Test lskcipher algorithms using the same logic as cipher algorithms.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As an aid to the transition from cipher algorithm implementations
to lskcipher, add a temporary wrapper when creating simple lskcipher
templates by using ecb(X) instead of X if an lskcipher implementation
of X cannot be found.

This can be reverted once all cipher implementations have switched
over to lskcipher.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add a new API type lskcipher designed for taking straight kernel
pointers instead of SG lists.  Its relationship to skcipher will
be analogous to that between shash and ahash.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Move the macro CRYPTO_ALG_TYPE_AHASH_MASK out of linux/crypto.h
and into crypto/ahash.c so that it's not visible to users of the
Crypto API.

Also remove the unused CRYPTO_ALG_TYPE_HASH_MASK macro.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Stop using the obsolete crypto_has_alg helper that is type-agnostic.
Instead use the type-specific helpers such as the newly added
crypto_has_aead.

This means that changes in the underlying type/mask values won't
affect IPsec.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add the helper crypto_has_aead.  This is meant to replace the
existing use of crypto_has_alg to locate AEAD algorithms.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove the repeated word "if" in comments.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

tfm is assigned first, so it does not need to initialize
the assignment.
Signed-off-by: Li zeming <zeming@nfschina.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

`strncpy` is deprecated for use on NUL-terminated destination strings [1].

We should prefer more robust and less ambiguous string interfaces.

`buf` is expected to be NUL-terminated for its eventual use in
`kstrtoul()` and NUL-padding is not required.

Due to the above, a suitable replacement is `strscpy` [2] due to the
fact that it guarantees NUL-termination on the destination buffer.

Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

`strncpy` is deprecated for use on NUL-terminated destination strings [1].

We know `hw.partname` is supposed to be NUL-terminated by its later use with seq_printf:
| nitrox_debugfs.c +25
|      seq_printf(s, "  Part Name: %s\n", ndev->hw.partname);

Let's prefer a more robust and less ambiguous string interface.

A suitable replacement is `strscpy` [2] due to the fact that it guarantees
NUL-termination on the destination buffer.

Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Set a more reasonable timeout for calculating the initial seed.

The reference manuals says that "The initial seed takes approximately
2,000,000 clock cycles." The rngc peripheral clock runs at >= 33.25MHz,
so seeding takes at most 60ms.

A timeout of 200ms is more appropriate than the current value of 3
seconds.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>