Skip to content

L
linux
Switch branch/tag
  1. 18 Nov, 2021 14 commits
  3. 17 Nov, 2021 19 commits
  5. 16 Nov, 2021 7 commits
    • Raed Salem's avatar
      net/mlx5: E-Switch, return error if encap isn't supported · c4c31767
      Raed Salem authored 
      On regular ConnectX HCAs getting encap mode isn't supported when the
E-Switch is in NONE mode. Current code would return no error code when
trying to get encap mode in such case which is wrong.

Fix by returning error value to indicate failure to caller in such case.

Fixes: 8e0aa4bc ("net/mlx5: E-switch, Protect eswitch mode changes")
Signed-off-by: default avatarRaed Salem <raeds@nvidia.com>
Reviewed-by: default avatarMark Bloch <mbloch@nvidia.com>
Reviewed-by: default avatarMaor Dickman <maord@nvidia.com>
Signed-off-by: default avatarSaeed Mahameed <saeedm@nvidia.com>
      c4c31767
    • Maher Sanalla's avatar
      net/mlx5: Lag, update tracker when state change event received · ae396d85
      Maher Sanalla authored 
      Currently, In NETDEV_CHANGELOWERSTATE/NETDEV_CHANGEUPPERSTATE events
handling, tracking is not fully completed if the LAG device is not ready
at the time the events occur. But, we must keep track of the upper and
lower states after receiving the events because RoCE needs this info in
mlx5_lag_get_roce_netdev() - in order to return the corresponding port
that its running on. Returning the wrong (not most recent) port will lead
to gids table being incorrect.

For example: If during the attachment of a slave to the bond, the other
non-attached port performs pci_reload, then the LAG device is not ready,
but that should not result in dismissing attached slave tracker update
automatically (which is performed in mlx5_handle_changelowerstate()), Since
these events might not come later, which can lead to both bond ports
having tx_enabled=0 - which is not a valid state of LAG bond.

Fixes: 9b412cc3 ("net/mlx5e: Add LAG warning if bond slave is not lag master")
Signed-off-by: default avatarMaher Sanalla <msanalla@nvidia.com>
Reviewed-by: default avatarMark Bloch <mbloch@nvidia.com>
Reviewed-by: default avatarJianbo Liu <jianbol@nvidia.com>
Reviewed-by: default avatarRoi Dayan <roid@nvidia.com>
Signed-off-by: default avatarSaeed Mahameed <saeedm@nvidia.com>
      ae396d85
    • Roi Dayan's avatar
      net/mlx5e: CT, Fix multiple allocations and memleak of mod acts · 806401c2
      Roi Dayan authored 
      CT clear action offload adds additional mod hdr actions to the
flow's original mod actions in order to clear the registers which
hold ct_state.
When such flow also includes encap action, a neigh update event
can cause the driver to unoffload the flow and then reoffload it.

Each time this happens, the ct clear handling adds that same set
of mod hdr actions to reset ct_state until the max of mod hdr
actions is reached.

Also the driver never releases the allocated mod hdr actions and
causing a memleak.

Fix above two issues by moving CT clear mod acts allocation
into the parsing actions phase and only use it when offloading the rule.
The release of mod acts will be done in the normal flow_put().

 backtrace:
    [<000000007316e2f3>] krealloc+0x83/0xd0
    [<00000000ef157de1>] mlx5e_mod_hdr_alloc+0x147/0x300 [mlx5_core]
    [<00000000970ce4ae>] mlx5e_tc_match_to_reg_set_and_get_id+0xd7/0x240 [mlx5_core]
    [<0000000067c5fa17>] mlx5e_tc_match_to_reg_set+0xa/0x20 [mlx5_core]
    [<00000000d032eb98>] mlx5_tc_ct_entry_set_registers.isra.0+0x36/0xc0 [mlx5_core]
    [<00000000fd23b869>] mlx5_tc_ct_flow_offload+0x272/0x1f10 [mlx5_core]
    [<000000004fc24acc>] mlx5e_tc_offload_fdb_rules.part.0+0x150/0x620 [mlx5_core]
    [<00000000dc741c17>] mlx5e_tc_encap_flows_add+0x489/0x690 [mlx5_core]
    [<00000000e92e49d7>] mlx5e_rep_update_flows+0x6e4/0x9b0 [mlx5_core]
    [<00000000f60f5602>] mlx5e_rep_neigh_update+0x39a/0x5d0 [mlx5_core]

Fixes: 1ef3018f ("net/mlx5e: CT: Support clear action")
Signed-off-by: default avatarRoi Dayan <roid@nvidia.com>
Reviewed-by: default avatarPaul Blakey <paulb@nvidia.com>
Reviewed-by: default avatarMaor Dickman <maord@nvidia.com>
Signed-off-by: default avatarSaeed Mahameed <saeedm@nvidia.com>
      806401c2
    • Avihai Horon's avatar
      net/mlx5: Fix flow counters SF bulk query len · 38a54cae
      Avihai Horon authored 
      When doing a flow counters bulk query, the number of counters to query
must be aligned to 4. Current SF bulk query len is not aligned to 4,
which leads to an error when trying to query more than 4 counters.

Fix it by aligning SF bulk query len to 4.

Fixes: 2fdeb4f4 ("net/mlx5: Reduce flow counters bulk query buffer size for SFs")
Signed-off-by: default avatarAvihai Horon <avihaih@nvidia.com>
Signed-off-by: default avatarSaeed Mahameed <saeedm@nvidia.com>
      38a54cae
    • Mark Bloch's avatar
      net/mlx5: E-Switch, rebuild lag only when needed · 2eb0cb31
      Mark Bloch authored 
      A user can enable VFs without changing E-Switch mode, this can happen
when a user moves straight to switchdev mode and only once in switchdev
VFs are enabled via the sysfs interface.

The cited commit assumed this isn't possible and exposed a single
API function where the E-switch calls into the lag code, breaks the lag
and prevents any other lag operations to take place until the
E-switch update has ended.

Breaking the hardware lag when it isn't needed can make it such that
hardware lag can't be enabled again.

In the sysfs call path check if the current E-Switch mode is NONE,
in the context of the function it can only mean the E-Switch is moving
out of NONE mode and the hardware lag should be disabled and enabled
once the mode change has ended. If the mode isn't NONE it means
VFs are about to be enabled and such operation doesn't require
toggling the hardware lag.

Fixes: cac1eb2c ("net/mlx5: Lag, properly lock eswitch if needed")
Signed-off-by: default avatarMark Bloch <mbloch@nvidia.com>
Signed-off-by: default avatarSaeed Mahameed <saeedm@nvidia.com>
      2eb0cb31
    • Neta Ostrovsky's avatar
      net/mlx5: Update error handler for UCTX and UMEM · ba50cd94
      Neta Ostrovsky authored 
      In the fast unload flow, the device state is set to internal error,
which indicates that the driver started the destroy process.
In this case, when a destroy command is being executed, it should return
MLX5_CMD_STAT_OK.
Fix MLX5_CMD_OP_DESTROY_UCTX and MLX5_CMD_OP_DESTROY_UMEM to return OK
instead of EIO.

This fixes a call trace in the umem release process -
[ 2633.536695] Call Trace:
[ 2633.537518]  ib_uverbs_remove_one+0xc3/0x140 [ib_uverbs]
[ 2633.538596]  remove_client_context+0x8b/0xd0 [ib_core]
[ 2633.539641]  disable_device+0x8c/0x130 [ib_core]
[ 2633.540615]  __ib_unregister_device+0x35/0xa0 [ib_core]
[ 2633.541640]  ib_unregister_device+0x21/0x30 [ib_core]
[ 2633.542663]  __mlx5_ib_remove+0x38/0x90 [mlx5_ib]
[ 2633.543640]  auxiliary_bus_remove+0x1e/0x30 [auxiliary]
[ 2633.544661]  device_release_driver_internal+0x103/0x1f0
[ 2633.545679]  bus_remove_device+0xf7/0x170
[ 2633.546640]  device_del+0x181/0x410
[ 2633.547606]  mlx5_rescan_drivers_locked.part.10+0x63/0x160 [mlx5_core]
[ 2633.548777]  mlx5_unregister_device+0x27/0x40 [mlx5_core]
[ 2633.549841]  mlx5_uninit_one+0x21/0xc0 [mlx5_core]
[ 2633.550864]  remove_one+0x69/0xe0 [mlx5_core]
[ 2633.551819]  pci_device_remove+0x3b/0xc0
[ 2633.552731]  device_release_driver_internal+0x103/0x1f0
[ 2633.553746]  unbind_store+0xf6/0x130
[ 2633.554657]  kernfs_fop_write+0x116/0x190
[ 2633.555567]  vfs_write+0xa5/0x1a0
[ 2633.556407]  ksys_write+0x4f/0xb0
[ 2633.557233]  do_syscall_64+0x5b/0x1a0
[ 2633.558071]  entry_SYSCALL_64_after_hwframe+0x65/0xca
[ 2633.559018] RIP: 0033:0x7f9977132648
[ 2633.559821] Code: 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 55 6f 2d 00 8b 00 85 c0 75 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 49 89 d4 55
[ 2633.562332] RSP: 002b:00007fffb1a83888 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 2633.563472] RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f9977132648
[ 2633.564541] RDX: 000000000000000c RSI: 000055b90546e230 RDI: 0000000000000001
[ 2633.565596] RBP: 000055b90546e230 R08: 00007f9977406860 R09: 00007f9977a54740
[ 2633.566653] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f99774056e0
[ 2633.567692] R13: 000000000000000c R14: 00007f9977400880 R15: 000000000000000c
[ 2633.568725] ---[ end trace 10b4fe52945e544d ]---

Fixes: 6a6fabbf ("net/mlx5: Update pci error handler entries and command translation")
Signed-off-by: default avatarNeta Ostrovsky <netao@nvidia.com>
Reviewed-by: default avatarLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: default avatarSaeed Mahameed <saeedm@nvidia.com>
      ba50cd94
    • Yevgeny Kliteynik's avatar
      net/mlx5: DR, Fix check for unsupported fields in match param · 455832d4
      Yevgeny Kliteynik authored 
      The existing loop doesn't cast the buffer while scanning it, which
results in out-of-bounds read and failure to create the matcher.

Fixes: 941f1979 ("net/mlx5: DR, Add check for unsupported fields in match param")
Signed-off-by: default avatarYevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: default avatarSaeed Mahameed <saeedm@nvidia.com>
      455832d4
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7