- 23 Jul, 2024 38 commits
-
-
Alvin Lee authored
[Description] There are scenarios where ODM4:1 is used but the surface is entirely outside of the first and last ODM slice. In this case the recout.width for the first and last slice is 0 because there's no overlap with the surface and that ODM slice, but this causes the x_pos for the cursor in this scenario to be calculated incorrectly. Instead we should use the ODM slice width instead of the recout width. Reviewed-by:
Nevenko Stupar <nevenko.stupar@amd.com> Signed-off-by:
Jerry Zuo <jerry.zuo@amd.com> Signed-off-by:
Alvin Lee <alvin.lee2@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Dillon Varone authored
[WHY] DML2.1 currently has no concept of a "blanked" stream. For cases like DPMS off, things like UCLK p-state is always allowed, so PMO is not required to optimize for it. [HOW] Add flag to DML2.1 display configuration to indicate all streams are blanked, so certain operations and optimizations can be skipped for optimal programming when displays are blanked. Reviewed-by:
Chaitanya Dhere <chaitanya.dhere@amd.com> Signed-off-by:
Dillon Varone <dillon.varone@amd.com> Tested-by:
-
Tom Chung authored
[Why] Sometimes the VRR cannot enable after login to the desktop. User space may call the DRM_IOCTL_MODE_GETCONNECTOR right after the DRM_IOCTL_MODE_RMFB. After calling DRM_IOCTL_MODE_RMFB to remove all the frame buffer and it will cause the driver to disable the crtc and disable the link while calling the link_set_dpms_off(). It will cause the dpcd read failed in amdgpu_dm_update_freesync_caps() while try to get the DP_MSA_TIMING_PAR_IGNORED capability and think the sink side does not support VRR. [How] Use the dpcd_caps.allow_invalid_MSA_timing_param flag instead of reading from dpcd directly. dpcd_caps.allow_invalid_MSA_timing_param flag is updated during HPD. It is safe to replace the original method. Reviewed-by:
Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by:
Tom Chung <chiahsuan.chung@amd.com> Tested-by:
-
Mounika Adhuri authored
[Why] To refactor MPC files [How] Moved MPC files to respective folders and updated makefiles appropriately. Reviewed-by:
Martin Leung <martin.leung@amd.com> Signed-off-by:
Mounika Adhuri <moadhuri@amd.com> Tested-by:
-
Chaitanya Dhere authored
July update for DML2.1 library from hardware team targeting DCN401 Reviewed-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by:
-
Sung Joon Kim authored
[why] To determine which block instance to power-gate, we look at the available pipe resource for both plane and stream. On MPO, DSC3 was falsely powered on even though only 1 stream path was enabled because the resource mapping was not done correctly. [how] Acquire the correct DSC instance to power on / off based on the instance of OPP which determines the backend pipe index. Reviewed-by:
Swapnil Patel <swapnil.patel@amd.com> Signed-off-by:
Sung Joon Kim <sungjoon.kim@amd.com> Tested-by:
-
Revalla Hari Krishna authored
[Why] To refactor MMHUBBUB files [How] Moved mmhubbub files from dcn20 to /mmhubbub/ folder and update makefile to fix compilation. Reviewed-by:
Revalla Hari Krishna <harikrishna.revalla@amd.com> Tested-by:
-
Chris Park authored
[Why] When DC state create DML memory allocation fails, memory is not deallocated subsequently, resulting in uninitialized structure that is not NULL. [How] Deallocate memory if DML memory allocation fails. Reviewed-by:
Joshua Aberback <joshua.aberback@amd.com> Signed-off-by:
Chris Park <chris.park@amd.com> Tested-by:
-
Alex Hung authored
[WHAT & HOW] amdgpu_dm can pass a null stream to dc_is_stream_unchanged. It is necessary to check for null before dereferencing them. This fixes 1 FORWARD_NULL issue reported by Coverity. Reviewed-by:
Alex Hung <alex.hung@amd.com> Tested-by:
-
Alex Hung authored
[WHAT & HOW] These pointers are null checked previously in the same function, indicating they might be null as reported by Coverity. As a result, they need to be checked when used again. This fixes 3 FORWARD_NULL issue reported by Coverity. Reviewed-by:
-
Alex Hung authored
[WHAT & HOW] "dcn20_validate_apply_pipe_split_flags" dereferences merge, and thus it cannot be a null pointer. Let's pass a valid pointer to avoid null dereference. This fixes 2 FORWARD_NULL issues reported by Coverity. Reviewed-by:
-
Alex Hung authored
dcn32_enable_phantom_stream can return null, so returned value must be checked before used. This fixes 1 NULL_RETURNS issue reported by Coverity. Reviewed-by:
-
Alex Hung authored
[WHAT & HOW] drr_timing and subvp_pipe are initialized to null and they are not always assigned new values. It is necessary to check for null before dereferencing. This fixes 2 FORWARD_NULL issues reported by Coverity. Reviewed-by:
-
Alex Hung authored
[WHAT & HOW] Variables used as denominators and maybe not assigned to other values, should not be 0. Change their default to 1 so they are never 0. This fixes 10 DIVIDE_BY_ZERO issues reported by Coverity. Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Revalla Hari Krishna authored
[Why] To refactor OPP files [How] Moved opp related files to specific opp folder and updated Makefiles. Acked-by:
-
Gabe Teeger authored
[why] Hotplugging with a DVI-DP dongle on pre-rdna embedded platform working about half the time. The regression was found to be the setting of link->type here. [what] Reverts fix besides the logging added. Reviewed-by:
Wenjing Liu <wenjing.liu@amd.com> Signed-off-by:
Gabe Teeger <gabe.teeger@amd.com> Tested-by:
-
Alvin Lee authored
[Description] - There are situations where HW cursor is required - In these scenarios we should disable subvp based on the HW cursor requirement Reviewed-by:
-
Alvin Lee authored
We resync the FIFO after each pipe update in apply_ctx_to_hw. However, this means that some pipes (in hardware) are based on the new context and some are based on the current_state (since the pipes are updated on at a time). In this case we must ensure to use the pipe_ctx that's currently still configured in hardware when turning off / on OTG's and reconfiguring ODM during the resync. Reviewed-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by:
-
Sridevi Arvindekar authored
Added option to allow transition for forced odm. Add the variation to the nightly run. Reviewed-by:
Sridevi Arvindekar <sarvinde@amd.com> Tested-by:
-
Jingwen Zhu authored
[Why] This is a workaround for an dcn3.1 hang that happens if otg dispclk is ramped while otg is on and stream enc is off. But this w/a should not trigger when we have a dig active. [How] Avoid disable otg when dig FE/BE FIFO was not switched. Acked-by:
Jingwen Zhu <jingwen.zhu@amd.com> Tested-by:
-
Relja Vojvodic authored
why: New scaler needs the input to be full range color space. This will also fix issues that come up due to not having a predefined limited color space matrix for certain color spaces how: Use bias and scale HW to expand the range of limited color spaces to full before the scaler Reviewed-by:
Krunoslav Kovac <krunoslav.kovac@amd.com> Signed-off-by:
Relja Vojvodic <relja.vojvodic@amd.com> Tested-by:
-
Wenjing Liu authored
[why] Based on power measurement result, in most cases when display clock is higher than Vmin display clock, lowering display clock using dynamic ODM will improve overall power consumption by 0 to 4 watts even if we can't reach Vmin. [how] Allow vmin optimization applied even if dispclk can't reach Vmin. Reviewed-by:
Jun Lei <jun.lei@amd.com> Signed-off-by:
-
Wenjing Liu authored
[why] The mux to switch between refclk and dto_dsc_clk is non double buffered. However dto dsc clk's phase and modulo divider registers are currently configured as double buffered update. This causes a problem when we switch to use dto dsc clk and program phase and modulo in the same sequence. In this sequence dsc clk is switched to dto but the clock divider programming doesn't take effect until next frame. When we try to program DSCC registers, SMN bus will hang because dto dsc clk divider phase is set to 0. [how] Configure phase and modulo to take effect immediately. Always switch to dto dsc clk before DSC clock is unagted. Switch back to refclk after DSC clock is gated. Acked-by:
-
Alex Hung authored
This reverts commit 5d93060d due to a power consumption regression. Reviewed-by:
-
Roman Li authored
[Why] When assert in dp_retrieve_lttpr_cap() is hit, dmesg has traces like: RIP: 0010:dp_retrieve_lttpr_cap+0xcc/0x1a0 [amdgpu] Call Trace: <TASK> dp_retrieve_lttpr_cap+0xcc/0x1a0 [amdgpu] report_bug+0x1e8/0x240 handle_bug+0x46/0x80 link_detect+0x35/0x580 [amdgpu] It happens when LTTPRs fail to increment dpcd repeater count. We have a recovery action in place for such cases. Assert is misleading, an indicative error in dmesg is more useful. [How] Remove ASSERT and use DC_LOG_ERROR instead. Reviewed-by:
Michael Strauss <michael.strauss@amd.com> Signed-off-by:
Roman Li <roman.li@amd.com> Tested-by:
-
Ryan Seto authored
[Why] Added clock logs to automate DPM testing [How] Added logs and helper functions to output clocks Co-authored-by:
Ryan Seto <ryanseto@amd.com> Reviewed-by:
-
Alvin Lee authored
[Description] For no plane scenarios we should not consider cursor as there cannot be any cursor if there's no planes. This fixes an issue where dc_commit_streams fails due to prefetch bandwidth requirements (the display config + dummy planes + cursor causes the prefetch bandwidth to exceed what is possible). Reviewed-by:
-
Samson Tam authored
[Why] Update coefficients and LUT tables for scaler and sharpener to improve quality and support different use cases (SDR/HDR) [How] Move scaler coefficients to new file dc_spl_scl_easf_filters.c Remove older coefficients file dc_sp_scl_filters_old.c Update default taps for EASF support Update LLS policy for DON'T CARE case Update cositing offset from 0.5 to 0.25 Add support to adjust sharpness based on level, use case, and scaling ratio ( using discrete levels ) Apply sharpness to all RGB surfaces and both NV12 and P010 video ( in fullscreen only ). Upscale and 1:1 ratios only Enable scaler when sharpening 1:1 ratios Add support for coefficients that are in S1.10 format (convert to S1.12 format) Reviewed-by:
Samson Tam <samson.tam@amd.com> Tested-by:
-
Alvin Lee authored
[Description] Due to a HW bug, HBR audio is not supported for DP2 encoders for certain ASICs. Reviewed-by:
-
Tom Chung authored
[Why] The VRR need to be supported for panel replay feature. If VRR capability is false, panel replay capability also need to be disabled. [How] After update the vrr capability, the panel replay capability also need to be check if need. Reviewed-by:
Wayne Lin <wayne.lin@amd.com> Signed-off-by:
-
Sunil Khatri authored
Add support for ip dump for sdma_v_5_0 in devcoredump. Signed-off-by:
Sunil Khatri <sunil.khatri@amd.com> Reviewed-by:
-
Sunil Khatri authored
Add ip dump for sdma_v5_0 for devcoredump for all instances of sdma. Signed-off-by:
-
Sunil Khatri authored
Add print support for ip dump for sdma_v_6_0 in devcoredump. Signed-off-by:
-
Sunil Khatri authored
Add ip dump for sdma_v6_0 for devcoredump for all instances of sdma. Reviewed-by:
-
Sunil Khatri authored
Fix the memory type logged for gtt memory size which is wrongly logged as visible vram size. Signed-off-by:
-
Sunil Khatri authored
fix extra line space between two functions. Signed-off-by:
-
Sunil Khatri authored
Add support for ip dump for sdma_v_5_2 in devcoredump. Signed-off-by:
-
Sunil Khatri authored
Add ip dump for sdma_v5_2 for devcoredump for all instances of sdma. Signed-off-by:
-
- 22 Jul, 2024 2 commits
-
-
Dave Airlie authored
Merge tag 'amd-drm-fixes-6.11-2024-07-18' of https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-fixes-6.11-2024-07-18: amdgpu: - Bump driver version for GFX12 DCC - DC documention warning fixes - VCN unified queue power fix - SMU fix - RAS fix - Display corruption fix Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240718215258.79356-1-alexander.deucher@amd.com
-
Dave Airlie authored
Merge tag 'drm-misc-next-fixes-2024-07-19' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next Two fixes for v3d to fix an array indexing on newer V3D revisions. Signed-off-by:
-
