- 21 Oct, 2004 18 commits
-
-
Adrian Bunk authored
Below is a patch from Denis Zaitsev <zzz@anda.ru> with the following two adjustments: - applies with -p1 (not -p0) - USRobotics -> U.S. Robotics (consistent with the rest of the entries) Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Yoichi Yuasa authored
The MIPS Makefile was changed so that the offset of data section may not be dependent on a specific machine header file. Signed-off-by:
Yoichi Yuasa <yuasa@hh.iij4u.or.jp> Signed-off-by:
-
Dinakar Guniguntala authored
One more place in fs/proc/array.c where ppid is wrong, which I missed in my previous mail to lkml. Signed-off-by:
Dinakar Guniguntala <dino@in.ibm.com> Signed-off-by:
-
Stefan Esser authored
From: <Urban.Widmark@enlight.net> The memset is because it was previously possible to send always the same CIFS fragment and use this to increase the data counters. When the data counter "exceeds" the amount of bytes expected this will return the buffer only partially initialised... With findfirst etc requests this should allow leaking kernel memory content. The other thing is that the data is only returned when data_tot and parm_tot both "exceed" the expected values. Previously it was possible to create a sequence of CIFS fragments that allowed exceeding the counters. The calling functions then would believe they received a number of bytes that does not fit into the allocated buffer. Signed-off-by:
-
Andy Whitcroft authored
When a system has a very large imbalance of overall memory size to ZONE_NORMAL (for example when large amounts of numa remap space are in use) page_writeback_init() may incorrectly set vm_dirty_ratio and dirty_background_ratio to zero; leading to divide by zero errors elsewhere. This patch bounds these at 1%. Signed-off-by:
Andy Whitcroft <apw@shadowen.org> Signed-off-by:
-
Randy Dunlap authored
Error: ./drivers/media/video/cx88/cx88-video.o .data refers to 0000000000000b28 R_X86_64_64 .exit.text Signed-off-by:
Randy Dunlap <rddunlap@osdl.org> Signed-off-by:
-
Randy Dunlap authored
Error: ./drivers/media/dvb/bt8xx/bt878.o .data refers to 0000000000000048 R_X86_64_64 .exit.text Signed-off-by:
-
Randy Dunlap authored
Error: ./drivers/media/video/saa7134/saa7134-core.o .data refers to 0000000000000028 R_X86_64_64 .exit.text Signed-off-by:
-
Hirokazu Takata authored
Here is a patch for M32R SIO driver, which replaces deprecated MODULE_PARAM() with modern module_param(). * drivers/serial/m32r_sio.c: - Replace MODULE_PARAM() with module_param(). - Fix a typo: UARRT_RSA_BASE --> UART_RSA_BASE. Signed-off-by:
Hirokazu Takata <takata@linux-m32r.org> Signed-off-by:
-
Werner Almesberger authored
In ia32 emulation, the amd64 kernel refuses the ioctls TIOCSBRK and TIOCCBRK with EINVAL. I've attached a patch that adds them to the compatibility list. Since all architectures have these ioctls ("m68knommu" inherits them from "m68k", "um" from its host) and use the same code, I think adding them to compat_ioctl.h is the correct choice (as opposed to adding them to arch/x86_64/ia32/ia32_ioctl.c). Signed-off-by:Werner Almesberger <werner@almesberger.net> Signed-off-by:
-
Olof Johansson authored
There seems to have been a couple of thinkos in the NUMA init code, in particular in find_cpu_node(): * Property size returned is in bytes, not words * Off-by-one error in loop iteration Signed-off-by:
Nathan Lynch <nathanl@austin.ibm.com> Signed-off-by:
Olof Johansson <olof@austin.ibm.com> Signed-off-by:
-
Paul Mackerras authored
When the generic IRQ patch went in, it changed the behaviour of setup_irq (compared to the previous ppc64 version) in that we now don't call the handler's enable function if it has a startup function. The XICS interrupt controller has a startup function, and so we weren't getting any interrupts through the XICS because they never got enabled. This patch adds a call to xics_enable_irq to xics_startup and fixes the problem. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Stephen Rothwell authored
One of the iSeries specific files used HZ without including linux/param.h and previously got away with it. Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Matt Porter authored
Fix ibm44x_common.c compile. Signed-off-by:
Eugene Surovegin <ebs@ebshome.net> Signed-off-by:
Matt Porter <mporter@kernel.crashing.org> Signed-off-by:
-
Roland Dreier authored
Recent changes to arch/ppc/boot/lib/Makefile cause CC arch/ppc/boot/lib/../../../../lib/zlib_inflate/infblock.o Assembler messages: FATAL: can't create arch/ppc/boot/lib/../../../../lib/zlib_inflate/infblock.o: No such file or directory when building a ppc kernel using O=$(output_dir) with CONFIG_ZLIB_INFLATE=n, because the $(output_dir)/lib/zlib_inflate directory doesn't get created. This patch, which makes arch/ppc/boot/lib/Makefile create the directory if needed, is one fix for the problem. Signed-off-by:Roland Dreier <roland@topspin.com> Signed-off-by:
-
Matt Porter authored
This patch removes the bogus workaround for dcache prefetch beyond the end of the physical memory. Signed-off-by:
-
Hideo Aoki authored
Signed-off-by:
-
Linus Torvalds authored
Instead, tty_io.c will always copy user space data to kernel space, leaving the drivers to worry only about normal kernel buffers. No more "from_user" flag, and having the user copy in each driver. This cleans up the code and also fixes a number of locking bugs.
-
- 20 Oct, 2004 22 commits
-
-
Linus Torvalds authored
This makes us do the proper copy_to_user() for the new posix timers code. Acked by Christoph Lameter <clameter@sgi.com>.
-
http://lia64.bkbits.net/linux-ia64-release-2.6.10Linus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
Tony Luck authored
-
Jesse Barnes authored
I forgot to add 'const volatile' to the I/O read/write functions in the last patch, and also forgot to update the _relaxed variants. This patch fixes that by adding 'const volatile' to the sn2 specific read/write routines as well as the ia64 machine vector wrappers. Signed-off-by:
Jesse Barnes <jbarnes@sgi.com> Signed-off-by:
Tony Luck <tony.luck@intel.com>
-
Jesse Barnes authored
This is a big patch mostly because I trimmed shub_mmr.h down from 17M to 11k or so. It fixes a number of things sparse discovered and removes some dead code, fixes up some prototypes, etc. Of note: o sn_proc_fs.c was directly dereferencing user pointers, fixed o sn_hwperf.c was missing an include and was using asm-ia64 directly o the I/O routines were all missing proper sparse annotations o dead code in prominfo_proc.c has been removed o fix generic build by putting numionodes into asm/sn/io.h With this patch applied, the check build is pretty clean. The sn_console bit depends on some of the other changes, so it's included here. Signed-off-by:
-
Jesse Barnes authored
sba_iommu.c needs to include linux/nodemask.h for node_online now. Here's a patch to add it. Signed-off-by:
-
Pat Gefre authored
Signed-off-by:
Patrick Gefre <pfg@sgi.com> Signed-off-by:
-
Jesse Barnes authored
The sn system controller driver needs asm/sn/io.h in order to build correctly (it was missing the numionodes declaration). Signed-off-by:
-
Pat Gefre authored
Signed-off-by:
-
Jesse Barnes authored
Clean up a couple of places that were using 0 instead of NULL, which is the more proper value. Signed-off-by:
-
Jesse Barnes authored
Looks like we were casting a value into a union and sparse doesn't like that. Why not just assign it directly to the appropriate field? Signed-off-by:
-
John Hawkes authored
Some have noticed that the overlapping sched domains code doesn't quite work as intended (it results in disjoint domains on some machines), and that a top level, machine spanning domain is needed. This patch from John Hawkes adds it to the ia64 code. This allows processes to run on all CPUs in large systems, though balancing is limited. It should go to Linus soon now otherwise large systems will only have ~16p (depending on topology) usable by the scheduler. I sanity checked it on a small system after rediffing John's original, and he's done some testing on very large systems. Nick, can you buy off on the sched.c change? Alternatively, do you want to send that fix separately John? Nick did indeed ACK this change, but it isn't dependent on this ia64 specific part ... so it's going to be submitted separately. Signed-off-by:
John Hawkes <hawkes@sgi.com> Signed-off-by:
-
Tony Luck authored
into intel.com:/data/home/aegl/BK/linux-ia64-release-2.6.10
-
bk://kernel.bkbits.net/davem/sparc-2.6Linus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
Alexander Viro authored
Signed-off-by:
Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by:
-
Alexander Viro authored
ioremap() is capable of dealing with addresses that are not page-aligned; no need to duplicate that in driver. Signed-off-by:
-
Alexander Viro authored
aic7xxx annotations - trivial part Signed-off-by:
-
Alexander Viro authored
Signed-off-by:
-
Alexander Viro authored
Signed-off-by:
-
Alexander Viro authored
Signed-off-by:
-
Alexander Viro authored
Annotated. Original reused the structure that contained pointers into remapped iomem for storing offsets in such area, so we need to split that beast. Signed-off-by:
-
Alexander Viro authored
Signed-off-by:
-
