All callers of btrfs_free_reserved_extent (respectively
__btrfs_free_reserved_extent with in set to 0) pass in extents which
have only been reserved but not yet written to. Namely,

* in cow_file_range that function is called only if create_io_em fails
  or btrfs_add_ordered_extent fail, both of which happen _before_ any IO
  is submitted to the newly reserved range

* in submit_compressed_extents the code flow is similar -
  out_free_reserve can be called only before
  btrfs_submit_compressed_write which is where any writes to the range
  could occur

* btrfs_new_extent_direct also calls btrfs_free_reserved_extent only
  if extent_map fails, before any IO is issued

* __btrfs_prealloc_file_range also calls btrfs_free_reserved_extent
  in case insertion of the metadata fails

* btrfs_alloc_tree_block again can only be called in case in-memory
  operations fail, before any IO is submitted

* btrfs_finish_ordered_io - this is the only caller where discarding
  the extent could have a material effect, since it can be called for
  an extent which was partially written.

With this change the submission of discards is optimised since discards
are now not being created for extents which are known to not have been
touched on disk.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

[PROBLEM]
qgroup create/remove code is currently returning EINVAL when the user
tries to create a qgroup on a subvolume without quota enabled. EINVAL is
already being used for too many error scenarios so that is hard to
depict what is the problem.

[FIX]
Currently scrub and balance code return -ENOTCONN when the user tries to
cancel/pause and no scrub or balance is currently running for the
desired subvolume. Do the same here by returning -ENOTCONN  when a user
tries to create/delete/assing/list a qgroup on a subvolume without quota
enabled.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Remove some variables that are set only to be checked later, and never
used.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Merge btrfs_sysfs_add_fsid() and btrfs_sysfs_add_devices_kobj() functions
as these two are small and they are called one after the other.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs_sysfs_add_device() creates the directory
/sys/fs/btrfs/UUID/devices but its function name is misleading. Rename
it to btrfs_sysfs_add_devices_kobj() instead. No functional changes.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Commit 24bd69cb ("Btrfs: sysfs: add support to add parent for fsid")
added parent argument in preparation to show the seed fsid under the
sprout fsid as in the patch [1] in the mailing list.

 [1] Btrfs: sysfs: support seed devices in the sysfs layout

But later this idea was superseded by another idea to rename the fsid as
in the commit f93c3997 ("btrfs: factor out sysfs code for updating
sprout fsid").

So we don't need parent argument anymore.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The struct member btrfs_device::device_dir_kobj holds the kobj of the
sysfs directory /sys/fs/btrfs/UUID/devices, so rename it from
device_dir_kobj to devices_kobj. No functional changes.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Make the number of copies explicit even for entries that use the default
0 value for consistency.
Signed-off-by: David Sterba <dsterba@suse.com>

The table is already used for ncopies, replace open coding of stripes
with the raid_attr value.
Signed-off-by: David Sterba <dsterba@suse.com>

When using the NO_HOLES feature, if we punch a hole into a file and then
fsync it, there are cases where a subsequent fsync will miss the fact that
a hole was punched, resulting in the holes not existing after replaying
the log tree.

Essentially these cases all imply that, tree-log.c:copy_items(), is not
invoked for the leafs that delimit holes, because nothing changed those
leafs in the current transaction. And it's precisely copy_items() where
we currenly detect and log holes, which works as long as the holes are
between file extent items in the input leaf or between the beginning of
input leaf and the previous leaf or between the last item in the leaf
and the next leaf.

First example where we miss a hole:

  *) The extent items of the inode span multiple leafs;

  *) The punched hole covers a range that affects only the extent items of
     the first leaf;

  *) The fsync operation is done in full mode (BTRFS_INODE_NEEDS_FULL_SYNC
     is set in the inode's runtime flags).

  That results in the hole not existing after replaying the log tree.

  For example, if the fs/subvolume tree has the following layout for a
  particular inode:

      Leaf N, generation 10:

      [ ... INODE_ITEM INODE_REF EXTENT_ITEM (0 64K) EXTENT_ITEM (64K 128K) ]

      Leaf N + 1, generation 10:

      [ EXTENT_ITEM (128K 64K) ... ]

  If at transaction 11 we punch a hole coverting the range [0, 128K[, we end
  up dropping the two extent items from leaf N, but we don't touch the other
  leaf, so we end up in the following state:

      Leaf N, generation 11:

      [ ... INODE_ITEM INODE_REF ]

      Leaf N + 1, generation 10:

      [ EXTENT_ITEM (128K 64K) ... ]

  A full fsync after punching the hole will only process leaf N because it
  was modified in the current transaction, but not leaf N + 1, since it
  was not modified in the current transaction (generation 10 and not 11).
  As a result the fsync will not log any holes, because it didn't process
  any leaf with extent items.

Second example where we will miss a hole:

  *) An inode as its items spanning 5 (or more) leafs;

  *) A hole is punched and it covers only the extents items of the 3rd
     leaf. This resulsts in deleting the entire leaf and not touching any
     of the other leafs.

  So the only leaf that is modified in the current transaction, when
  punching the hole, is the first leaf, which contains the inode item.
  During the full fsync, the only leaf that is passed to copy_items()
  is that first leaf, and that's not enough for the hole detection
  code in copy_items() to determine there's a hole between the last
  file extent item in the 2nd leaf and the first file extent item in
  the 3rd leaf (which was the 4th leaf before punching the hole).

Fix this by scanning all leafs and punch holes as necessary when doing a
full fsync (less common than a non-full fsync) when the NO_HOLES feature
is enabled. The lack of explicit file extent items to mark holes makes it
necessary to scan existing extents to determine if holes exist.

A test case for fstests follows soon.

Fixes: 16e7549f ("Btrfs: incompatible format change to remove hole extents")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Pull RISC-V fixes from Paul Walmsley:
 "Three fixes for RISC-V:

   - Don't free and reuse memory containing the code that CPUs parked at
     boot reside in.

   - Fix rv64 build problems for ubsan and some modules by adding
     logical and arithmetic shift helpers for 128-bit values. These are
     from libgcc and are similar to what's present for ARM64.

   - Fix vDSO builds to clean up their own temporary files"

* tag 'riscv/for-v5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Less inefficient gcc tishift helpers (and export their symbols)
  riscv: delete temporary files
  riscv: make sure the cores stay looping in .Lsecondary_park

Pull networking fixes from David Miller:

 1) Fix non-blocking connect() in x25, from Martin Schiller.

 2) Fix spurious decryption errors in kTLS, from Jakub Kicinski.

 3) Netfilter use-after-free in mtype_destroy(), from Cong Wang.

 4) Limit size of TSO packets properly in lan78xx driver, from Eric
    Dumazet.

 5) r8152 probe needs an endpoint sanity check, from Johan Hovold.

 6) Prevent looping in tcp_bpf_unhash() during sockmap/tls free, from
    John Fastabend.

 7) hns3 needs short frames padded on transmit, from Yunsheng Lin.

 8) Fix netfilter ICMP header corruption, from Eyal Birger.

 9) Fix soft lockup when low on memory in hns3, from Yonglong Liu.

10) Fix NTUPLE firmware command failures in bnxt_en, from Michael Chan.

11) Fix memory leak in act_ctinfo, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits)
  cxgb4: reject overlapped queues in TC-MQPRIO offload
  cxgb4: fix Tx multi channel port rate limit
  net: sched: act_ctinfo: fix memory leak
  bnxt_en: Do not treat DSN (Digital Serial Number) read failure as fatal.
  bnxt_en: Fix ipv6 RFS filter matching logic.
  bnxt_en: Fix NTUPLE firmware command failures.
  net: systemport: Fixed queue mapping in internal ring map
  net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec
  net: dsa: sja1105: Don't error out on disabled ports with no phy-mode
  net: phy: dp83867: Set FORCE_LINK_GOOD to default after reset
  net: hns: fix soft lockup when there is not enough memory
  net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key()
  net/sched: act_ife: initalize ife->metalist earlier
  netfilter: nat: fix ICMP header corruption on ICMP errors
  net: wan: lapbether.c: Use built-in RCU list checking
  netfilter: nf_tables: fix flowtable list del corruption
  netfilter: nf_tables: fix memory leak in nf_tables_parse_netdev_hooks()
  netfilter: nf_tables: remove WARN and add NLA_STRING upper limits
  netfilter: nft_tunnel: ERSPAN_VERSION must not be null
  netfilter: nft_tunnel: fix null-attribute check
  ...

Pull i2c fixes from Wolfram Sang:
 "Two runtime PM fixes and one leak fix"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: iop3xx: Fix memory leak in probe error path
  i2c: tegra: Properly disable runtime PM on driver's probe error
  i2c: tegra: Fix suspending in active runtime PM state

A queue can't belong to multiple traffic classes. So, reject
any such configuration that results in overlapped queues for a
traffic class.

Fixes: b1396c2b ("cxgb4: parse and configure TC-MQPRIO offload")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

T6 can support 2 egress traffic management channels per port to
double the total number of traffic classes that can be configured.
In this configuration, if the class belongs to the other channel,
then all the queues must be bound again explicitly to the new class,
for the rate limit parameters on the other channel to take effect.

So, always explicitly bind all queues to the port rate limit traffic
class, regardless of the traffic management channel that it belongs
to. Also, only bind queues to port rate limit traffic class, if all
the queues don't already belong to an existing different traffic
class.

Fixes: 4ec4762d ("cxgb4: add TC-MATCHALL classifier egress offload")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement a cleanup method to properly free ci->params

BUG: memory leak
unreferenced object 0xffff88811746e2c0 (size 64):
  comm "syz-executor617", pid 7106, jiffies 4294943055 (age 14.250s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    c0 34 60 84 ff ff ff ff 00 00 00 00 00 00 00 00  .4`.............
  backtrace:
    [<0000000015aa236f>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline]
    [<0000000015aa236f>] slab_post_alloc_hook mm/slab.h:586 [inline]
    [<0000000015aa236f>] slab_alloc mm/slab.c:3320 [inline]
    [<0000000015aa236f>] kmem_cache_alloc_trace+0x145/0x2c0 mm/slab.c:3549
    [<000000002c946bd1>] kmalloc include/linux/slab.h:556 [inline]
    [<000000002c946bd1>] kzalloc include/linux/slab.h:670 [inline]
    [<000000002c946bd1>] tcf_ctinfo_init+0x21a/0x530 net/sched/act_ctinfo.c:236
    [<0000000086952cca>] tcf_action_init_1+0x400/0x5b0 net/sched/act_api.c:944
    [<000000005ab29bf8>] tcf_action_init+0x135/0x1c0 net/sched/act_api.c:1000
    [<00000000392f56f9>] tcf_action_add+0x9a/0x200 net/sched/act_api.c:1410
    [<0000000088f3c5dd>] tc_ctl_action+0x14d/0x1bb net/sched/act_api.c:1465
    [<000000006b39d986>] rtnetlink_rcv_msg+0x178/0x4b0 net/core/rtnetlink.c:5424
    [<00000000fd6ecace>] netlink_rcv_skb+0x61/0x170 net/netlink/af_netlink.c:2477
    [<0000000047493d02>] rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5442
    [<00000000bdcf8286>] netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
    [<00000000bdcf8286>] netlink_unicast+0x223/0x310 net/netlink/af_netlink.c:1328
    [<00000000fc5b92d9>] netlink_sendmsg+0x2c0/0x570 net/netlink/af_netlink.c:1917
    [<00000000da84d076>] sock_sendmsg_nosec net/socket.c:639 [inline]
    [<00000000da84d076>] sock_sendmsg+0x54/0x70 net/socket.c:659
    [<0000000042fb2eee>] ____sys_sendmsg+0x2d0/0x300 net/socket.c:2330
    [<000000008f23f67e>] ___sys_sendmsg+0x8a/0xd0 net/socket.c:2384
    [<00000000d838e4f6>] __sys_sendmsg+0x80/0xf0 net/socket.c:2417
    [<00000000289a9cb1>] __do_sys_sendmsg net/socket.c:2426 [inline]
    [<00000000289a9cb1>] __se_sys_sendmsg net/socket.c:2424 [inline]
    [<00000000289a9cb1>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2424

Fixes: 24ec483c ("net: sched: Introduce act_ctinfo action")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Kevin 'ldir' Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Kevin 'ldir' Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

The existing __lshrti3 was really inefficient, and the other two helpers
are also needed to compile some modules.

Add the missing versions, and export all of the symbols like arm64
already does.

This code is based on the assembly generated by libgcc builds.

This fixes a build break triggered by ubsan:

riscv64-unknown-linux-gnu-ld: lib/ubsan.o: in function `.L2':
ubsan.c:(.text.unlikely+0x38): undefined reference to `__ashlti3'
riscv64-unknown-linux-gnu-ld: ubsan.c:(.text.unlikely+0x42): undefined reference to `__ashrti3'
Signed-off-by: Olof Johansson <olof@lixom.net>
[paul.walmsley@sifive.com: use SYM_FUNC_{START,END} instead of
 ENTRY/ENDPROC; note libgcc origin]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>

Pull MTD fixes from Miquel Raynal:
 "Raw NAND:
   - GPMI: Fix the suspend/resume

  SPI-NOR:
   - Fix quad enable on Spansion like flashes
   - Fix selection of 4-byte addressing opcodes on Spansion"

* tag 'mtd/fixes-for-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: rawnand: gpmi: Restore nfc timing setup after suspend/resume
  mtd: rawnand: gpmi: Fix suspend/resume problem
  mtd: spi-nor: Fix quad enable for Spansion like flashes
  mtd: spi-nor: Fix selection of 4-byte addressing opcodes on Spansion

Pull drm fixes from Dave Airlie:
 "Back from LCA2020, fixes wasn't too busy last week, seems to have
  quieten down appropriately, some amdgpu, i915, then a core mst fix and
  one fix for virtio-gpu and one for rockchip:

  core mst:
   - serialize down messages and clear timeslots are on unplug

  amdgpu:
   - Update golden settings for renoir
   - eDP fix

  i915:
   - uAPI fix: Remove dash and colon from PMU names to comply with
     tools/perf
   - Fix for include file that was indirectly included
   - Two fixes to make sure VMA are marked active for error capture

  virtio:
   - maintain obj reservation lock when submitting cmds

  rockchip:
   - increase link rate var size to accommodate rates"

* tag 'drm-fixes-2020-01-19' of git://anongit.freedesktop.org/drm/drm:
  drm/amd/display: Reorder detect_edp_sink_caps before link settings read.
  drm/amdgpu: update goldensetting for renoir
  drm/dp_mst: Have DP_Tx send one msg at a time
  drm/dp_mst: clear time slots for ports invalid
  drm/i915/pmu: Do not use colons or dashes in PMU names
  drm/rockchip: fix integer type used for storing dp data rate
  drm/i915/gt: Mark ring->vma as active while pinned
  drm/i915/gt: Mark context->state vma as active while pinned
  drm/i915/gt: Skip trying to unbind in restore_ggtt_mappings
  drm/i915: Add missing include file <linux/math64.h>
  drm/virtio: add missing virtio_gpu_array_lock_resv call

Temporary files used in the VDSO build process linger on even after make
mrproper: vdso-dummy.o.tmp, vdso.so.dbg.tmp.

Delete them once they're no longer needed.
Signed-off-by: Ilie Halip <ilie.halip@gmail.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>

Pull x86 fixes from Ingo Molnar:
 "Misc fixes:

   - a resctrl fix for uninitialized objects found by debugobjects

   - a resctrl memory leak fix

   - fix the unintended re-enabling of the of SME and SEV CPU flags if
     memory encryption was disabled at bootup via the MSR space"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/CPU/AMD: Ensure clearing of SME/SEV features is maintained
  x86/resctrl: Fix potential memory leak
  x86/resctrl: Fix an imbalance in domain_remove_cpu()

Pull timer fixes from Ingo Molnar:
 "Three fixes: fix link failure on Alpha, fix a Sparse warning and
  annotate/robustify a lockless access in the NOHZ code"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick/sched: Annotate lockless access to last_jiffies_update
  lib/vdso: Make __cvdso_clock_getres() static
  time/posix-stubs: Provide compat itimer supoprt for alpha

Pull cpu/SMT fix from Ingo Molnar:
 "Fix a build bug on CONFIG_HOTPLUG_SMT=y && !CONFIG_SYSFS kernels"

* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpu/SMT: Fix x86 link error without CONFIG_SYSFS

Pull x86 RAS fix from Ingo Molnar:
 "Fix a thermal throttling race that can result in easy to trigger boot
  crashes on certain Ice Lake platforms"

* 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce/therm_throt: Do not access uninitialized therm_work

Pull perf fixes from Ingo Molnar:
 "Tooling fixes, three Intel uncore driver fixes, plus an AUX events fix
  uncovered by the perf fuzzer"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/uncore: Remove PCIe3 unit for SNR
  perf/x86/intel/uncore: Fix missing marker for snr_uncore_imc_freerunning_events
  perf/x86/intel/uncore: Add PCI ID of IMC for Xeon E3 V5 Family
  perf: Correctly handle failed perf_get_aux_event()
  perf hists: Fix variable name's inconsistency in hists__for_each() macro
  perf map: Set kmap->kmaps backpointer for main kernel map chunks
  perf report: Fix incorrectly added dimensions as switch perf data file
  tools lib traceevent: Fix memory leakage in filter_event

Pull locking fixes from Ingo Molnar:
 "Three fixes:

    - Fix an rwsem spin-on-owner crash, introduced in v5.4

    - Fix a lockdep bug when running out of stack_trace entries,
      introduced in v5.4

    - Docbook fix"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rwsem: Fix kernel crash when spinning on RWSEM_OWNER_UNKNOWN
  futex: Fix kernel-doc notation warning
  locking/lockdep: Fix buffer overrun problem in stack_trace[]

Pull irq fix from Ingo Molnar:
 "Fix a recent regression in the Ingenic SoCs irqchip driver that floods
  the syslog"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/ingenic: Get rid of the legacy IRQ domain

Pull EFI fixes from Ingo Molnar:
 "Three EFI fixes:

   - Fix a slow-boot-scrolling regression but making sure we use WC for
     EFI earlycon framebuffer mappings on x86

   - Fix a mixed EFI mode boot crash

   - Disable paging explicitly before entering startup_32() in mixed
     mode bootup"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/efistub: Disable paging at mixed mode entry
  efi/libstub/random: Initialize pointer variables to zero for mixed mode
  efi/earlycon: Fix write-combine mapping on x86

Pull rseq fixes from Ingo Molnar:
 "Two rseq bugfixes:

   - CLONE_VM !CLONE_THREAD didn't work properly, the kernel would end
     up corrupting the TLS of the parent. Technically a change in the
     ABI but the previous behavior couldn't resonably have been relied
     on by applications so this looks like a valid exception to the ABI
     rule.

   - Make the RSEQ_FLAG_UNREGISTER ABI behavior consistent with the
     handling of other flags. This is not thought to impact any
     applications either"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rseq: Unregister rseq for clone CLONE_VM
  rseq: Reject unknown flags on rseq unregister

Pull thread fixes from Christian Brauner:
 "Here is an urgent fix for ptrace_may_access() permission checking.

  Commit 69f594a3 ("ptrace: do not audit capability check when
  outputing /proc/pid/stat") introduced the ability to opt out of audit
  messages for accesses to various proc files since they are not
  violations of policy.

  While doing so it switched the check from ns_capable() to
  has_ns_capability{_noaudit}(). That means it switched from checking
  the subjective credentials (ktask->cred) of the task to using the
  objective credentials (ktask->real_cred). This is appears to be wrong.
  ptrace_has_cap() is currently only used in ptrace_may_access() And is
  used to check whether the calling task (subject) has the
  CAP_SYS_PTRACE capability in the provided user namespace to operate on
  the target task (object). According to the cred.h comments this means
  the subjective credentials of the calling task need to be used.

  With this fix we switch ptrace_has_cap() to use security_capable() and
  thus back to using the subjective credentials.

  As one example where this might be particularly problematic, Jann
  pointed out that in combination with the upcoming IORING_OP_OPENAT{2}
  feature, this bug might allow unprivileged users to bypass the
  capability checks while asynchronously opening files like /proc/*/mem,
  because the capability checks for this would be performed against
  kernel credentials.

  To illustrate on the former point about this being exploitable: When
  io_uring creates a new context it records the subjective credentials
  of the caller. Later on, when it starts to do work it creates a kernel
  thread and registers a callback. The callback runs with kernel creds
  for ktask->real_cred and ktask->cred.

  To prevent this from becoming a full-blown 0-day io_uring will call
  override_cred() and override ktask->cred with the subjective
  credentials of the creator of the io_uring instance. With
  ptrace_has_cap() currently looking at ktask->real_cred this override
  will be ineffective and the caller will be able to open arbitray proc
  files as mentioned above.

  Luckily, this is currently not exploitable but would be so once
  IORING_OP_OPENAT{2} land in v5.6. Let's fix it now.

  To minimize potential regressions I successfully ran the criu
  testsuite. criu makes heavy use of ptrace() and extensively hits
  ptrace_may_access() codepaths and has a good change of detecting any
  regressions.

  Additionally, I succesfully ran the ptrace and seccomp kernel tests"

* tag 'for-linus-2020-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  ptrace: reintroduce usage of subjective credentials in ptrace_has_cap()

Pull s390 fixes from Vasily Gorbik:

 - Fix printing misleading Secure-IPL enabled message when it is not.

 - Fix a race condition between host ap bus and guest ap bus doing
   device reset in crypto code.

 - Fix sanity check in CCA cipher key function (CCA AES cipher key
   support), which fails otherwise.

* tag 's390-5.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/setup: Fix secure ipl message
  s390/zcrypt: move ap device reset from bus to driver code
  s390/zcrypt: Fix CCA cipher key gen with clear key value function

Pull SCSI fixes from James Bottomley:
 "Three fixes in drivers with no impact to core code.

  The mptfusion fix is enormous because the driver API had to be
  rethreaded to pass down the necessary iocp pointer, but once that's
  done a significant chunk of code is deleted.

  The other two patches are small"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: mptfusion: Fix double fetch bug in ioctl
  scsi: storvsc: Correctly set number of hardware queues for IDE disk
  scsi: fnic: fix invalid stack access

Pull char/misc fixes from Greg KH:
 "Here are some small fixes for 5.5-rc7

  Included here are:

   -  two lkdtm fixes

   -  coresight build fix

   -  Documentation update for the hw process document

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  Documentation/process: Add Amazon contact for embargoed hardware issues
  lkdtm/bugs: fix build error in lkdtm_UNSET_SMEP
  lkdtm/bugs: Make double-fault test always available
  coresight: etm4x: Fix unused function warning

Pull staging and IIO driver fixes from Greg KH:
 "Here are some small staging and iio driver fixes for 5.5-rc7

  All of them are for some small reported issues. Nothing major, full
  details in the shortlog.

  All have been in linux-next with no reported issues"

* tag 'staging-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: comedi: ni_routes: allow partial routing information
  staging: comedi: ni_routes: fix null dereference in ni_find_route_source()
  iio: light: vcnl4000: Fix scale for vcnl4040
  iio: buffer: align the size of scan bytes to size of the largest element
  iio: chemical: pms7003: fix unmet triggered buffer dependency
  iio: imu: st_lsm6dsx: Fix selection of ST_LSM6DS3_ID
  iio: adc: ad7124: Fix DT channel configuration

Pull USB driver fixes from Greg KH:
 "Here are some small USB driver and core fixes for 5.5-rc7

  There's one fix for hub wakeup issues and a number of small usb-serial
  driver fixes and device id updates.

  The hub fix has been in linux-next for a while with no reported
  issues, and the usb-serial ones have all passed 0-day with no
  problems"

* tag 'usb-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: serial: quatech2: handle unbound ports
  USB: serial: keyspan: handle unbound ports
  USB: serial: io_edgeport: add missing active-port sanity check
  USB: serial: io_edgeport: handle unbound ports on URB completion
  USB: serial: ch341: handle unbound port at reset_resume
  USB: serial: suppress driver bind attributes
  USB: serial: option: add support for Quectel RM500Q in QDL mode
  usb: core: hub: Improved device recognition on remote wakeup
  USB: serial: opticon: fix control-message timeouts
  USB: serial: option: Add support for Quectel RM500Q
  USB: serial: simple: Add Motorola Solutions TETRA MTP3xxx and MTP85xx

Michael Chan says:

====================
bnxt_en: Bug fixes.

3 small bug fix patches.  The 1st two are aRFS fixes and the last one
fixes a fatal driver load failure on some kernels without PCIe
extended config space support enabled.

Please also queue these for -stable.  Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

DSN read can fail, for example on a kdump kernel without PCIe extended
config space support.  If DSN read fails, don't set the
BNXT_FLAG_DSN_VALID flag and continue loading.  Check the flag
to see if the stored DSN is valid before using it.  Only VF reps
creation should fail without valid DSN.

Fixes: 03213a99 ("bnxt: move bp->switch_id initialization to PF probe")
Reported-by: Marc Smith <msmith626@gmail.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix bnxt_fltr_match() to match ipv6 source and destination addresses.
The function currently only checks ipv4 addresses and will not work
corrently on ipv6 filters.

Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The NTUPLE related firmware commands are sent to the wrong firmware
channel, causing all these commands to fail on new firmware that
supports the new firmware channel.  Fix it by excluding the 3
NTUPLE firmware commands from the list for the new firmware channel.

Fixes: 760b6d33 ("bnxt_en: Add support for 2nd firmware message channel.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>