- 26 Oct, 2013 40 commits
-
-
Dan Carpenter authored
commit 58f09e00 upstream. The arg64 struct has a hole after ->buf_size which isn't cleared. Or if any of the calls to copy_from_user() fail then that would cause an information leak as well. This was assigned CVE-2013-2147. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Mike Miller <mike.miller@hp.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Dan Carpenter authored
commit 627aad1c upstream. The pciinfo struct has a two byte hole after ->dev_fn so stack information could be leaked to the user. This was assigned CVE-2013-2147. Signed-off-by:
-
Sasha Levin authored
commit 46a7c17d upstream. iscsi_if_send_reply() may return -ESRCH if there were no targets to send data to. Currently we're ignoring this value and looping in attempt to do it over and over, which will usually lead in a hung task like this one: [ 4920.817298] INFO: task trinity:9074 blocked for more than 120 seconds. [ 4920.818527] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 4920.819982] trinity D 0000000000000000 5504 9074 2756 0x00000004 [ 4920.825374] ffff880003961a98 0000000000000086 ffff8800001aa000 ffff8800001aa000 [ 4920.826791] 00000000001d4340 ffff880003961fd8 ffff880003960000 00000000001d4340 [ 4920.828241] 00000000001d4340 00000000001d4340 ffff880003961fd8 00000000001d4340 [ 4920.833231] [ 4920.833519] Call Trace: [ 4920.834010] [<ffffffff826363fa>] schedule+0x3a/0x50 [ 4920.834953] [<ffffffff82634ac9>] __mutex_lock_common+0x209/0x5b0 [ 4920.836226] [<ffffffff81af805d>] ? iscsi_if_rx+0x2d/0x990 [ 4920.837281] [<ffffffff81053943>] ? sched_clock+0x13/0x20 [ 4920.838305] [<ffffffff81af805d>] ? iscsi_if_rx+0x2d/0x990 [ 4920.839336] [<ffffffff82634eb0>] mutex_lock_nested+0x40/0x50 [ 4920.840423] [<ffffffff81af805d>] iscsi_if_rx+0x2d/0x990 [ 4920.841434] [<ffffffff810dffed>] ? sub_preempt_count+0x9d/0xd0 [ 4920.842548] [<ffffffff82637bb0>] ? _raw_read_unlock+0x30/0x60 [ 4920.843666] [<ffffffff821f71de>] netlink_unicast+0x1ae/0x1f0 [ 4920.844751] [<ffffffff821f7997>] netlink_sendmsg+0x227/0x350 [ 4920.845850] [<ffffffff821857bd>] ? sock_update_netprioidx+0xdd/0x1b0 [ 4920.847060] [<ffffffff82185732>] ? sock_update_netprioidx+0x52/0x1b0 [ 4920.848276] [<ffffffff8217f226>] sock_aio_write+0x166/0x180 [ 4920.849348] [<ffffffff810dfe41>] ? get_parent_ip+0x11/0x50 [ 4920.850428] [<ffffffff811d0d9a>] do_sync_write+0xda/0x120 [ 4920.851465] [<ffffffff810dffed>] ? sub_preempt_count+0x9d/0xd0 [ 4920.852579] [<ffffffff810dfe41>] ? get_parent_ip+0x11/0x50 [ 4920.853608] [<ffffffff81791887>] ? security_file_permission+0x27/0xb0 [ 4920.854821] [<ffffffff811d0f4c>] vfs_write+0x16c/0x180 [ 4920.855781] [<ffffffff811d104f>] sys_write+0x4f/0xa0 [ 4920.856798] [<ffffffff82638e79>] system_call_fastpath+0x16/0x1b [ 4920.877487] 1 lock held by trinity/9074: [ 4920.878239] #0: (rx_queue_mutex){+.+...}, at: [<ffffffff81af805d>] iscsi_if_rx+0x2d/0x990 [ 4920.880005] Kernel panic - not syncing: hung_task: blocked tasks Signed-off-by:
Sasha Levin <levinsasha928@gmail.com> Acked-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
Ben Hutchings authored
This reverts commit de77b795, which was commit f6e80abe upstream. This fix was only appropriate for Linux 3.7 onward, and introduced a regression when applied to earlier versions. Signed-off-by:
-
Jan Kara authored
commit 17b7f7cf upstream. Refuse RW mount of isofs filesystem. So far we just silently changed it to RO mount but when the media is writeable, block layer won't notice this change and thus will think device is used RW and will block eject button of the drive. That is unexpected by users because for non-writeable media eject button works just fine. Userspace mount(8) command handles this just fine and retries mounting with MS_RDONLY set so userspace shouldn't see any regression. Plus any tool mounting isofs is likely confronted with the case of read-only media where block layer already refuses to mount the filesystem without MS_RDONLY set so our behavior shouldn't be anything new for it. Reported-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Vasily Titskiy authored
commit 9e0bf92c upstream. The DuoSense touchscreen device causes a 10 second timeout. This fix removes the delay. Signed-off-by:
Vasily Titskiy <qehgt0@gmail.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Stefan Kriwanek authored
commit 06bb5219 upstream. Some devices of the "Speedlink VAD Cezanne" model need more aggressive fixing than already done. I made sure through testing that this patch would not interfere with the proper working of a device that is bug-free. (The driver drops EV_REL events with abs(val) >= 256, which are not achievable even on the highest laser resolution hardware setting.) Signed-off-by:
Stefan Kriwanek <mail@stefankriwanek.de> Signed-off-by:
-
Lino Sanfilippo authored
commit 03a1cec1 upstream. Boyd Yang reported a problem for the case that multiple threads of the same thread group are waiting for a reponse for a permission event. In this case it is possible that some of the threads are never woken up, even if the response for the event has been received (see http://marc.info/?l=linux-kernel&m=131822913806350&w=2). The reason is that we are currently merging permission events if they belong to the same thread group. But we are not prepared to wake up more than one waiter for each event. We do wait_event(group->fanotify_data.access_waitq, event->response || atomic_read(&group->fanotify_data.bypass_perm)); and after that event->response = 0; which is the reason that even if we woke up all waiters for the same event some of them may see event->response being already set 0 again, then go back to sleep and block forever. With this patch we avoid that more than one thread is waiting for a response by not merging permission events for the same thread group any more. Reported-by:
Boyd Yang <boyd.yang@gmail.com> Signed-off-by:
Lino Sanfilippo <LinoSanfilipp@gmx.de> Signed-off-by:
Eric Paris <eparis@redhat.com> Signed-off-by:
-
Andi Kleen authored
commit 89365e6c upstream. Need to check for /dev/zero. Most likely more strings are missing too. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1366848182-30449-1-git-send-email-andi@firstfloor.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Peter Zijlstra authored
commit 95cf59ea upstream. Jiri reported that he could trigger the WARN_ON_ONCE() in perf_cgroup_switch() using sw-events. This is because sw-events share a cpuctx with multiple PMUs. Use the ->unique_pmu pointer to limit the pmu iteration to unique cpuctx instances. Reported-and-Tested-by:
Jiri Olsa <jolsa@redhat.com> Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-so7wi2zf3jjzrwcutm2mkz0j@git.kernel.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Peter Zijlstra authored
commit 3f1f3320 upstream. Stephane thought the perf_cpu_context::active_pmu name confusing and suggested using 'unique_pmu' instead. This pointer is a pointer to a 'random' pmu sharing the cpuctx instance, therefore limiting a for_each_pmu loop to those where cpuctx->unique_pmu matches the pmu we get a loop over unique cpuctx instances. Suggested-by:
Stephane Eranian <eranian@google.com> Signed-off-by:
-
Li Zefan authored
commit f169007b upstream. If we pass fd of memory.usage_in_bytes of cgroup A to cgroup.event_control of cgroup B, then we won't get memory usage notification from A but B! What's worse, if A and B are in different mount hierarchy, we'll end up accessing NULL pointer! Disallow this kind of invalid usage. Signed-off-by:
Li Zefan <lizefan@huawei.com> Acked-by:
Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Ben Hutchings authored
This bug fix is only for stable branches older than 3.10. The bug was fixed upstream by commit 2768935a ('sfc: reuse pages to avoid DMA mapping/unmapping costs'), but that change is totally unsuitable for stable. Commit b590ace0 ('sfc: Fix efx_rx_buf_offset() in the presence of swiotlb') added an explicit page_offset member to struct efx_rx_buffer, which must be set consistently with the u.page and dma_addr fields. However, it failed to add the necessary assignment in efx_resurrect_rx_buffer(). It also did not correct the calculation of efx_rx_buffer::dma_addr in efx_resurrect_rx_buffer(), which assumes that DMA-mapping a page will result in a page-aligned DMA address (exactly what swiotlb violates). Add the assignment of efx_rx_buffer::page_offset and change the calculation of dma_addr to make use of it. Signed-off-by:
Ben Hutchings <bhutchings@solarflare.com>
-
Jason Wang authored
commit ece793fc upstream. We try to linearize part of the skb when the number of iov is greater than MAX_SKB_FRAGS. This is not enough since each single vector may occupy more than one pages, so zerocopy_sg_fromiovec() may still fail and may break the guest network. Solve this problem by calculate the pages needed for iov before trying to do zerocopy and switch to use copy instead of zerocopy if it needs more than MAX_SKB_FRAGS. This is done through introducing a new helper to count the pages for iov, and call uarg->callback() manually when switching from zerocopy to copy to notify vhost. We can do further optimization on top. This bug were introduced from b92946e2 (macvtap: zerocopy: validate vectors before building skb). Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> [bwh: Backported to 3.2: callback only takes one argument] Signed-off-by:
-
Ben Hutchings authored
This reverts commit 9e443904, which was commit 57ab0485 upstream. Taking the semaphore here leads to sleeping in atomic context. This was fixed in mainline commit a0c516cb ("zram: don't grab mutex in zram_slot_free_noity") but that is too difficult to backport. Signed-off-by:
-
Chen Gang authored
commit 5676005a upstream. need set '\0' for 'local_buffer'. SPLPAR_MAXLENGTH is 1026, RTAS_DATA_BUF_SIZE is 4096. so the contents of rtas_data_buf may truncated in memcpy. if contents are really truncated. the splpar_strlen is more than 1026. the next while loop checking will not find the end of buffer. that will cause memory access violation. Signed-off-by:
Chen Gang <gang.chen@asianux.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Greg Ungerer authored
commit f84f52a5 upstream. There is a lot of years of collected cruft in the m68knommu linker script. Clean it all up and use the well defined linker script support macros. Support is maintained for building both ROM/FLASH based and RAM based setups. No major changes to section layouts, though the rodata section is now lumped in with the read/write data section. Signed-off-by:
Greg Ungerer <gerg@uclinux.org> Signed-off-by:
-
Greg Ungerer authored
commit ed865e31 upstream. Use the non-MMU linker script for ColdFire builds when we are building for MMU enabled. The image layout is correct for loading on existing ColdFire dev boards. The only addition required to the current non-MMU linker script is to add support for the fixup section. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
Matt Waddel <mwaddel@yahoo.com> Acked-by:
Kurt Mahan <kmahan@xmission.com> Signed-off-by:
-
Greg Ungerer authored
commit 40c1b9cf upstream. The merge of m68knommu left the linker scripts a little disorganized. Some consistent naming and squashing two of scripts that just include others can simplify things a lot. So merge the two simple including scripts, and rename the nommu script to be consistent with the existing m68k linker scripts. Signed-off-by:
-
Julius Werner authored
commit 481f2d4f upstream. The USB hub driver's event handler contains a check to catch SuperSpeed devices that transitioned into the SS.Inactive state and tries to fix them with a reset. It decides whether to do a plain hub port reset or call the usb_reset_device() function based on whether there was a device attached to the port. However, there are device/hub combinations (found with a JetFlash Transcend mass storage stick (8564:1000) on the root hub of an Intel LynxPoint PCH) which can transition to the SS.Inactive state on disconnect (and stay there long enough for the host to notice). In this case, above-mentioned reset check will call usb_reset_device() on the stale device data structure. The kernel will send pointless LPM control messages to the no longer connected device address and can even cause several 5 second khubd stalls on some (buggy?) host controllers, before finally accepting the device's fate amongst a flurry of error messages. This patch makes the choice of reset dependent on the port status that has just been read from the hub in addition to the existence of an in-kernel data structure for the device, and only proceeds with the more extensive reset if both are valid. Signed-off-by:
Julius Werner <jwerner@chromium.org> Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by:
-
Oleg Nesterov authored
commit 776164c1 upstream. debugfs_remove_recursive() is wrong, 1. it wrongly assumes that !list_empty(d_subdirs) means that this dir should be removed. This is not that bad by itself, but: 2. if d_subdirs does not becomes empty after __debugfs_remove() it gives up and silently fails, it doesn't even try to remove other entries. However ->d_subdirs can be non-empty because it still has the already deleted !debugfs_positive() entries. 3. simple_release_fs() is called even if __debugfs_remove() fails. Suppose we have dir1/ dir2/ file2 file1 and someone opens dir1/dir2/file2. Now, debugfs_remove_recursive(dir1/dir2) succeeds, and dir1/dir2 goes away. But debugfs_remove_recursive(dir1) silently fails and doesn't remove this directory. Because it tries to delete (the already deleted) dir1/dir2/file2 again and then fails due to "Avoid infinite loop" logic. Test-case: #!/bin/sh cd /sys/kernel/debug/tracing echo 'p:probe/sigprocmask sigprocmask' >> kprobe_events sleep 1000 < events/probe/sigprocmask/id & echo -n >| kprobe_events [ -d events/probe ] && echo "ERR!! failed to rm probe" And after that it is not possible to create another probe entry. With this patch debugfs_remove_recursive() skips !debugfs_positive() files although this is not strictly needed. The most important change is that it does not try to make ->d_subdirs empty, it simply scans the whole list(s) recursively and removes as much as possible. Link: http://lkml.kernel.org/r/20130726151256.GC19472@redhat.comAcked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Salman Qazi authored
commit 9c5da09d upstream. An rmdir pushes css's ref count to zero. However, if the associated directory is open at the time, the dentry ref count is non-zero. If the fd for this directory is then passed into perf_event_open, it does a css_get(). This bounces the ref count back up from zero. This is a problem by itself. But what makes it turn into a crash is the fact that we end up doing an extra dput, since we perform a dput when css_put sees the ref count go down to zero. css_tryget() does not fall into that trap. So, we use that instead. Reproduction test-case for the bug: #include <unistd.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <linux/unistd.h> #include <linux/perf_event.h> #include <string.h> #include <errno.h> #include <stdio.h> #define PERF_FLAG_PID_CGROUP (1U << 2) int perf_event_open(struct perf_event_attr *hw_event_uptr, pid_t pid, int cpu, int group_fd, unsigned long flags) { return syscall(__NR_perf_event_open,hw_event_uptr, pid, cpu, group_fd, flags); } /* * Directly poke at the perf_event bug, since it's proving hard to repro * depending on where in the kernel tree. what moved? */ int main(int argc, char **argv) { int fd; struct perf_event_attr attr; memset(&attr, 0, sizeof(attr)); attr.exclude_kernel = 1; attr.size = sizeof(attr); mkdir("/dev/cgroup/perf_event/blah", 0777); fd = open("/dev/cgroup/perf_event/blah", O_RDONLY); perror("open"); rmdir("/dev/cgroup/perf_event/blah"); sleep(2); perf_event_open(&attr, fd, 0, -1, PERF_FLAG_PID_CGROUP); perror("perf_event_open"); close(fd); return 0; } Signed-off-by:
Salman Qazi <sqazi@google.com> Signed-off-by:
-
Daniel Santos authored
commit 65478428 upstream. Prior to this patch the following code breaks: /** * multiline_example - this breaks kernel-doc */ #define multiline_example( \ myparam) Producing this error: Error(somefile.h:983): cannot understand prototype: 'multiline_example( \ ' This patch fixes the issue by appending all lines ending in a blackslash (optionally followed by whitespace), removing the backslash and any whitespace after it prior to appending (just like the C pre-processor would). This fixes a break in kerel-doc introduced by the additions to rbtree.h. Signed-off-by:
Daniel Santos <daniel.santos@pobox.com> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Michal Marek <mmarek@suse.cz> Signed-off-by:
-
Kirill Tkhai authored
[ Upstream commit 7a3b0f89 ] Pass 1 in %o1 to indicate that syscall_trace accounts exit. Signed-off-by:
Kirill Tkhai <tkhai@yandex.ru> CC: David Miller <davem@davemloft.net> Signed-off-by:
-
Kirill Tkhai authored
[ Upstream commit ab2abda6 ] (From v1 to v2: changed comment) On the way linux_sparc_syscall32->linux_syscall_trace32->goto 2f, register %o5 doesn't clear its second 32-bit. Fix that. Signed-off-by:
-
David S. Miller authored
[ Upstream commit 63d49966 ] Reported-by:
-
Kirill Tkhai authored
[ Upstream commit 61d9b935 ] The functions __down_read __down_read_trylock __down_write __down_write_trylock __up_read __up_write __downgrade_write are implemented inline, so remove corresponding EXPORT_SYMBOLs (They lead to compile errors on RT kernel). Signed-off-by:
-
Kirill Tkhai authored
[ Upstream commit 1c2696cd ] 1)Use kvmap_itlb_longpath instead of kvmap_dtlb_longpath. 2)Handle page #0 only, don't handle page #1: bleu -> blu (KERNBASE is 0x400000, so #1 does not exist too. But everything is possible in the future. Fix to not to have problems later.) 3)Remove unused kvmap_itlb_nonlinear. Signed-off-by:
-
David S. Miller authored
[ Upstream commit 21af8107 ] Meelis Roos reports a crash in esp_free_lun_tag() in the presense of a disk which has died. The issue is that when we issue an autosense command, we do so by hijacking the original command that caused the check-condition. When we do so we clear out the ent->tag[] array when we issue it via find_and_prep_issuable_command(). This is so that the autosense command is forced to be issued non-tagged. That is problematic, because it is the value of ent->tag[] which determines whether we issued the original scsi command as tagged vs. non-tagged (see esp_alloc_lun_tag()). And that, in turn, is what trips up the sanity checks in esp_free_lun_tag(). That function needs the original ->tag[] values in order to free up the tag slot properly. Fix this by remembering the original command's tag values, and having esp_alloc_lun_tag() and esp_free_lun_tag() use them. Reported-by:
Meelis Roos <mroos@linux.ee> Tested-by:
-
Ricardo Ribalda authored
[ Upstream commit 7167cf0e ] The dma descriptors indexes are only initialized on the probe function. If a packet is on the buffer when temac_stop is called, the dma descriptors indexes can be left on a incorrect state where no other package can be sent. So an interface could be left in an usable state after ifdow/ifup. This patch makes sure that the descriptors indexes are in a proper status when the device is open. Signed-off-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by:
-
Salam Noureddine authored
[ Upstream commit 9260d3e1 ] It is possible for the timer handlers to run after the call to ipv6_mc_down so use in6_dev_put instead of __in6_dev_put in the handler function in order to do proper cleanup when the refcnt reaches 0. Otherwise, the refcnt can reach zero without the inet6_dev being destroyed and we end up leaking a reference to the net_device and see messages like the following, unregister_netdevice: waiting for eth0 to become free. Usage count = 1 Tested on linux-3.4.43. Signed-off-by:
Salam Noureddine <noureddine@aristanetworks.com> Signed-off-by:
-
Salam Noureddine authored
[ Upstream commit e2401654 ] It is possible for the timer handlers to run after the call to ip_mc_down so use in_dev_put instead of __in_dev_put in the handler function in order to do proper cleanup when the refcnt reaches 0. Otherwise, the refcnt can reach zero without the in_device being destroyed and we end up leaking a reference to the net_device and see messages like the following, unregister_netdevice: waiting for eth0 to become free. Usage count = 1 Tested on linux-3.4.43. Signed-off-by:
-
Neil Horman authored
[ Upstream commit 5a0068de ] Recently grabbed this report: https://bugzilla.redhat.com/show_bug.cgi?id=1005567 Of an issue in which the bonding driver, with an attached vlan encountered the following errors when bond0 was taken down and back up: dummy1: promiscuity touches roof, set promiscuity failed. promiscuity feature of device might be broken. The error occurs because, during __bond_release_one, if we release our last slave, we take on a random mac address and issue a NETDEV_CHANGEADDR notification. With an attached vlan, the vlan may see that the vlan and bond mac address were in sync, but no longer are. This triggers a call to dev_uc_add and dev_set_rx_mode, which enables IFF_PROMISC on the bond device. Then, when we complete __bond_release_one, we use the current state of the bond flags to determine if we should decrement the promiscuity of the releasing slave. But since the bond changed promiscuity state during the release operation, we incorrectly decrement the slave promisc count when it wasn't in promiscuous mode to begin with, causing the above error Fix is pretty simple, just cache the bonding flags at the start of the function and use those when determining the need to set promiscuity. This is also needed for the ALLMULTI flag CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Mark Wu <wudxw@linux.vnet.ibm.com> CC: "David S. Miller" <davem@davemloft.net> Reported-by:
Mark Wu <wudxw@linux.vnet.ibm.com> Signed-off-by:
-
Peter Korsgaard authored
[ Upstream commit bf0ea638 ] Pass-all-multicast is controlled by bit 3 in RX control, not bit 2 (pass undersized frames). Reported-by:
Joseph Chang <joseph_chang@davicom.com.tw> Signed-off-by:
Peter Korsgaard <peter@korsgaard.com> Signed-off-by:
-
Roger Luethi authored
[ Upstream commit 207070f5 ] Outgoing packets sent by via-rhine have their VLAN PCP field off by one (when hardware acceleration is enabled). The TX descriptor expects only VID and PCP (without a CFI/DEI bit). Peter Boström noticed and reported the bug. Signed-off-by:
Roger Luethi <rl@hellgate.ch> Cc: Peter Boström <peter.bostrom@netrounds.com> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit 2811ebac ] In the following scenario the socket is corked: If the first UDP packet is larger then the mtu we try to append it to the write queue via ip6_ufo_append_data. A following packet, which is smaller than the mtu would be appended to the already queued up gso-skb via plain ip6_append_data. This causes random memory corruptions. In ip6_ufo_append_data we also have to be careful to not queue up the same skb multiple times. So setup the gso frame only when no first skb is available. This also fixes a shortcoming where we add the current packet's length to cork->length but return early because of a packet > mtu with dontfrag set (instead of sutracting it again). Found with trinity. Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Ansis Atteka authored
[ Upstream commit 703133de ] If local fragmentation is allowed, then ip_select_ident() and ip_select_ident_more() need to generate unique IDs to ensure correct defragmentation on the peer. For example, if IPsec (tunnel mode) has to encrypt large skbs that have local_df bit set, then all IP fragments that belonged to different ESP datagrams would have used the same identificator. If one of these IP fragments would get lost or reordered, then peer could possibly stitch together wrong IP fragments that did not belong to the same datagram. This would lead to a packet loss or data corruption. Signed-off-by:
Ansis Atteka <aatteka@nicira.com> Signed-off-by:
-
Chris Healy authored
[ Upstream commit 9a062013 ] This changes the message_age_timer calculation to use the BPDU's max age as opposed to the local bridge's max age. This is in accordance with section 8.6.2.3.2 Step 2 of the 802.1D-1998 sprecification. With the current implementation, when running with very large bridge diameters, convergance will not always occur even if a root bridge is configured to have a longer max age. Tested successfully on bridge diameters of ~200. Signed-off-by:
Chris Healy <cphealy@gmail.com> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 95ee6208 ] Alan Chester reported an issue with IPv6 on SCTP that IPsec traffic is not being encrypted, whereas on IPv4 it is. Setting up an AH + ESP transport does not seem to have the desired effect: SCTP + IPv4: 22:14:20.809645 IP (tos 0x2,ECT(0), ttl 64, id 0, offset 0, flags [DF], proto AH (51), length 116) 192.168.0.2 > 192.168.0.5: AH(spi=0x00000042,sumlen=16,seq=0x1): ESP(spi=0x00000044,seq=0x1), length 72 22:14:20.813270 IP (tos 0x2,ECT(0), ttl 64, id 0, offset 0, flags [DF], proto AH (51), length 340) 192.168.0.5 > 192.168.0.2: AH(spi=0x00000043,sumlen=16,seq=0x1): SCTP + IPv6: 22:31:19.215029 IP6 (class 0x02, hlim 64, next-header SCTP (132) payload length: 364) fe80::222:15ff:fe87:7fc.3333 > fe80::92e6:baff:fe0d:5a54.36767: sctp 1) [INIT ACK] [init tag: 747759530] [rwnd: 62464] [OS: 10] [MIS: 10] Moreover, Alan says: This problem was seen with both Racoon and Racoon2. Other people have seen this with OpenSwan. When IPsec is configured to encrypt all upper layer protocols the SCTP connection does not initialize. After using Wireshark to follow packets, this is because the SCTP packet leaves Box A unencrypted and Box B believes all upper layer protocols are to be encrypted so it drops this packet, causing the SCTP connection to fail to initialize. When IPsec is configured to encrypt just SCTP, the SCTP packets are observed unencrypted. In fact, using `socat sctp6-listen:3333 -` on one end and transferring "plaintext" string on the other end, results in cleartext on the wire where SCTP eventually does not report any errors, thus in the latter case that Alan reports, the non-paranoid user might think he's communicating over an encrypted transport on SCTP although he's not (tcpdump ... -X): ... 0x0030: 5d70 8e1a 0003 001a 177d eb6c 0000 0000 ]p.......}.l.... 0x0040: 0000 0000 706c 6169 6e74 6578 740a 0000 ....plaintext... Only in /proc/net/xfrm_stat we can see XfrmInTmplMismatch increasing on the receiver side. Initial follow-up analysis from Alan's bug report was done by Alexey Dobriyan. Also thanks to Vlad Yasevich for feedback on this. SCTP has its own implementation of sctp_v6_xmit() not calling inet6_csk_xmit(). This has the implication that it probably never really got updated along with changes in inet6_csk_xmit() and therefore does not seem to invoke xfrm handlers. SCTP's IPv4 xmit however, properly calls ip_queue_xmit() to do the work. Since a call to inet6_csk_xmit() would solve this problem, but result in unecessary route lookups, let us just use the cached flowi6 instead that we got through sctp_v6_get_dst(). Since all SCTP packets are being sent through sctp_packet_transmit(), we do the route lookup / flow caching in sctp_transport_route(), hold it in tp->dst and skb_dst_set() right after that. If we would alter fl6->daddr in sctp_v6_xmit() to np->opt->srcrt, we possibly could run into the same effect of not having xfrm layer pick it up, hence, use fl6_update_dst() in sctp_v6_get_dst() instead to get the correct source routed dst entry, which we assign to the skb. Also source address routing example from 62503411 ("sctp: fix sctp to work with ipv6 source address routing") still works with this patch! Nevertheless, in RFC5095 it is actually 'recommended' to not use that anyway due to traffic amplification [1]. So it seems we're not supposed to do that anyway in sctp_v6_xmit(). Moreover, if we overwrite the flow destination here, the lower IPv6 layer will be unable to put the correct destination address into IP header, as routing header is added in ipv6_push_nfrag_opts() but then probably with wrong final destination. Things aside, result of this patch is that we do not have any XfrmInTmplMismatch increase plus on the wire with this patch it now looks like: SCTP + IPv6: 08:17:47.074080 IP6 2620:52:0:102f:7a2b:cbff:fe27:1b0a > 2620:52:0:102f:213:72ff:fe32:7eba: AH(spi=0x00005fb4,seq=0x1): ESP(spi=0x00005fb5,seq=0x1), length 72 08:17:47.074264 IP6 2620:52:0:102f:213:72ff:fe32:7eba > 2620:52:0:102f:7a2b:cbff:fe27:1b0a: AH(spi=0x00003d54,seq=0x1): ESP(spi=0x00003d55,seq=0x1), length 296 This fixes Kernel Bugzilla 24412. This security issue seems to be present since 2.6.18 kernels. Lets just hope some big passive adversary in the wild didn't have its fun with that. lksctp-tools IPv6 regression test suite passes as well with this patch. [1] http://www.secdev.org/conf/IPv6_RH_security-csw07.pdfReported-by:
Alan Chester <alan.chester@tekelec.com> Reported-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit d0fe8c88 ] I've been hitting a NULL ptr deref while using netconsole because the np->dev check and the pointer manipulation in netpoll_cleanup are done without rtnl and the following sequence happens when having a netconsole over a vlan and we remove the vlan while disabling the netconsole: CPU 1 CPU2 removes vlan and calls the notifier enters store_enabled(), calls netdev_cleanup which checks np->dev and then waits for rtnl executes the netconsole netdev release notifier making np->dev == NULL and releases rtnl continues to dereference a member of np->dev which at this point is == NULL Signed-off-by:
Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by:
-
