This patch update the CQ structure fields to support the feature
added in new silicons and also dump these fields in debugfs.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Link: https://lore.kernel.org/r/20231130060703.16769-1-gakula@marvell.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Physical Layer Collision Avoidance messages are correctly documented but
were left-out of the global list of ethnl messages, add them to the
list.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://lore.kernel.org/r/20231130191400.817948-1-maxime.chevallier@bootlin.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use DO_ONCE_LITE_IF() and __cold attribute to put tcp_gro_dev_warn()
out of line.

This also allows the message to be printed again after a
"echo 1 > /sys/kernel/debug/clear_warn_once"

Also add a READ_ONCE() when reading device mtu, as it could
be changed concurrently.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231130184135.4130860-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The netlink-raw schema was not updated when bitfield32 was added
to the genetlink-legacy schema. It is needed for rtnetlink families.

s8 and s16 were also missing.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231130214959.27377-2-donald.hunter@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Set backpressure watermark for hardware RX queues. Backpressure
gets triggered when the available buffers of a hardware RX queue
falls below the set watermark. This backpressure will propagate
to packet processing pipeline in the OCTEON card, so that the host
receives fewer packets and prevents packet dropping at host.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Set the error code if octep_ctrl_net_get_mtu() fails.  Currently the code
returns success.

Fixes: 0a5f8534 ("octeon_ep: get max rx packet length from firmware")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Sathesh B Edara <sedara@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pedro Tammela says:

====================
selftests: tc-testing: more tdc updates

Follow-up on a feedback from Jakub and random cleanups from related
net/sched patches
====================

Link: https://lore.kernel.org/r/20231129222424.910148-1-pctammela@mojatatu.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Remove this generic file and move the tests to their appropriate files
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20231129222424.910148-5-pctammela@mojatatu.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

All tests in this file pertain to flower, so name it appropriately
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20231129222424.910148-4-pctammela@mojatatu.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Patchwork CI didn't like the extra './', so remove it.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20231129222424.910148-3-pctammela@mojatatu.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tests using DEV2 should not be run in a dedicated net namespace,
and in parallel, as this device cannot be shared.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20231129222424.910148-2-pctammela@mojatatu.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

To increase the chances of people finding the rendered docs
add a link to specs.rst and index.rst.

Add a label in the generated index.rst and while at it adjust
the title a little bit.
Reviewed-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231129041427.2763074-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Shinas Rasheed says:

====================
support OCTEON CN98 devices

Implement device unload control net API required for CN98
devices and add support in driver for the same.

V1: https://lore.kernel.org/all/20231127162135.2529363-1-srasheed@marvell.com/
====================

Link: https://lore.kernel.org/r/20231129045348.2538843-1-srasheed@marvell.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add PCI Endpoint NIC support for Octeon CN98 devices.
CN98 devices are part of Octeon 9 family products with
similar PCI NIC characteristics to CN93, already supported
driver.

Add CN98 card to the device id table, as well
as support differences in the register fields and
certain usage scenarios such as unload.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Link: https://lore.kernel.org/r/20231129045348.2538843-3-srasheed@marvell.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Device unload control net function should inform firmware
of driver unload to let it take necessary actions to cleanup.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Link: https://lore.kernel.org/r/20231129045348.2538843-2-srasheed@marvell.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

BYTES_PER_KBIT is defined in units.h, use that definition.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231128174813.394462-1-andriy.shevchenko@linux.intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Currently the phy reset sequence is as shown below for a
devicetree described mdio phy on boot:

1. Assert the phy_device's reset as part of registering
2. Deassert the phy_device's reset as part of registering
3. Deassert the phy_device's reset as part of phy_probe
4. Deassert the phy_device's reset as part of phy_hw_init

The extra two deasserts include waiting the deassert delay afterwards,
which is adding unnecessary delay.

This applies to both possible types of resets (reset controller
reference and a reset gpio) that can be used.

Here's some snipped tracing output using the following command line
params "trace_event=gpio:* trace_options=stacktrace" illustrating
the reset handling and where its coming from:

    /* Assert */
       systemd-udevd-283     [002] .....     6.780434: gpio_value: 544 set 0
       systemd-udevd-283     [002] .....     6.783849: <stack trace>
     => gpiod_set_raw_value_commit
     => gpiod_set_value_nocheck
     => gpiod_set_value_cansleep
     => mdio_device_reset
     => mdiobus_register_device
     => phy_device_register
     => fwnode_mdiobus_phy_device_register
     => fwnode_mdiobus_register_phy
     => __of_mdiobus_register
     => stmmac_mdio_register
     => stmmac_dvr_probe
     => stmmac_pltfr_probe
     => devm_stmmac_pltfr_probe
     => qcom_ethqos_probe
     => platform_probe

    /* Deassert */
       systemd-udevd-283     [002] .....     6.802480: gpio_value: 544 set 1
       systemd-udevd-283     [002] .....     6.805886: <stack trace>
     => gpiod_set_raw_value_commit
     => gpiod_set_value_nocheck
     => gpiod_set_value_cansleep
     => mdio_device_reset
     => phy_device_register
     => fwnode_mdiobus_phy_device_register
     => fwnode_mdiobus_register_phy
     => __of_mdiobus_register
     => stmmac_mdio_register
     => stmmac_dvr_probe
     => stmmac_pltfr_probe
     => devm_stmmac_pltfr_probe
     => qcom_ethqos_probe
     => platform_probe

    /* Deassert */
       systemd-udevd-283     [002] .....     6.882601: gpio_value: 544 set 1
       systemd-udevd-283     [002] .....     6.886014: <stack trace>
     => gpiod_set_raw_value_commit
     => gpiod_set_value_nocheck
     => gpiod_set_value_cansleep
     => mdio_device_reset
     => phy_probe
     => really_probe
     => __driver_probe_device
     => driver_probe_device
     => __device_attach_driver
     => bus_for_each_drv
     => __device_attach
     => device_initial_probe
     => bus_probe_device
     => device_add
     => phy_device_register
     => fwnode_mdiobus_phy_device_register
     => fwnode_mdiobus_register_phy
     => __of_mdiobus_register
     => stmmac_mdio_register
     => stmmac_dvr_probe
     => stmmac_pltfr_probe
     => devm_stmmac_pltfr_probe
     => qcom_ethqos_probe
     => platform_probe

    /* Deassert */
      NetworkManager-477     [000] .....     7.023144: gpio_value: 544 set 1
      NetworkManager-477     [000] .....     7.026596: <stack trace>
     => gpiod_set_raw_value_commit
     => gpiod_set_value_nocheck
     => gpiod_set_value_cansleep
     => mdio_device_reset
     => phy_init_hw
     => phy_attach_direct
     => phylink_fwnode_phy_connect
     => __stmmac_open
     => stmmac_open

There's a lot of paths where the device is getting its reset
asserted and deasserted. Let's track the state and only actually
do the assert/deassert when it changes.
Reported-by: Sagar Cheluvegowda <quic_scheluve@quicinc.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20231127-net-phy-reset-once-v2-1-448e8658779e@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf-next 2023-11-30

We've added 30 non-merge commits during the last 7 day(s) which contain
a total of 58 files changed, 1598 insertions(+), 154 deletions(-).

The main changes are:

1) Add initial TX metadata implementation for AF_XDP with support in mlx5
   and stmmac drivers. Two types of offloads are supported right now, that
   is, TX timestamp and TX checksum offload, from Stanislav Fomichev with
   stmmac implementation from Song Yoong Siang.

2) Change BPF verifier logic to validate global subprograms lazily instead
   of unconditionally before the main program, so they can be guarded using
   BPF CO-RE techniques, from Andrii Nakryiko.

3) Add BPF link_info support for uprobe multi link along with bpftool
   integration for the latter, from Jiri Olsa.

4) Use pkg-config in BPF selftests to determine ld flags which is
   in particular needed for linking statically, from Akihiko Odaki.

5) Fix a few BPF selftest failures to adapt to the upcoming LLVM18,
   from Yonghong Song.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (30 commits)
  bpf/tests: Remove duplicate JSGT tests
  selftests/bpf: Add TX side to xdp_hw_metadata
  selftests/bpf: Convert xdp_hw_metadata to XDP_USE_NEED_WAKEUP
  selftests/bpf: Add TX side to xdp_metadata
  selftests/bpf: Add csum helpers
  selftests/xsk: Support tx_metadata_len
  xsk: Add option to calculate TX checksum in SW
  xsk: Validate xsk_tx_metadata flags
  xsk: Document tx_metadata_len layout
  net: stmmac: Add Tx HWTS support to XDP ZC
  net/mlx5e: Implement AF_XDP TX timestamp and checksum offload
  tools: ynl: Print xsk-features from the sample
  xsk: Add TX timestamp and TX checksum offload support
  xsk: Support tx_metadata_len
  selftests/bpf: Use pkg-config for libelf
  selftests/bpf: Override PKG_CONFIG for static builds
  selftests/bpf: Choose pkg-config for the target
  bpftool: Add support to display uprobe_multi links
  selftests/bpf: Add link_info test for uprobe_multi link
  selftests/bpf: Use bpf_link__destroy in fill_link_info tests
  ...
====================

Conflicts:

Documentation/netlink/specs/netdev.yaml:
  839ff60d ("net: page_pool: add nlspec for basic access to page pools")
  48eb03dd ("xsk: Add TX timestamp and TX checksum offload support")
https://lore.kernel.org/all/20231201094705.1ee3cab8@canb.auug.org.au/

While at it also regen, tree is dirty after:
  48eb03dd ("xsk: Add TX timestamp and TX checksum offload support")
looks like code wasn't re-rendered after "render-max" was removed.

Link: https://lore.kernel.org/r/20231130145708.32573-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Cross-merge networking fixes after downstream PR.

No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Paolo Abeni:
 "Including fixes from bpf and wifi.

  Current release - regressions:

   - neighbour: fix __randomize_layout crash in struct neighbour

   - r8169: fix deadlock on RTL8125 in jumbo mtu mode

  Previous releases - regressions:

   - wifi:
       - mac80211: fix warning at station removal time
       - cfg80211: fix CQM for non-range use

   - tools: ynl-gen: fix unexpected response handling

   - octeontx2-af: fix possible buffer overflow

   - dpaa2: recycle the RX buffer only after all processing done

   - rswitch: fix missing dev_kfree_skb_any() in error path

  Previous releases - always broken:

   - ipv4: fix uaf issue when receiving igmp query packet

   - wifi: mac80211: fix debugfs deadlock at device removal time

   - bpf:
       - sockmap: af_unix stream sockets need to hold ref for pair sock
       - netdevsim: don't accept device bound programs

   - selftests: fix a char signedness issue

   - dsa: mv88e6xxx: fix marvell 6350 probe crash

   - octeontx2-pf: restore TC ingress police rules when interface is up

   - wangxun: fix memory leak on msix entry

   - ravb: keep reverse order of operations in ravb_remove()"

* tag 'net-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits)
  net: ravb: Keep reverse order of operations in ravb_remove()
  net: ravb: Stop DMA in case of failures on ravb_open()
  net: ravb: Start TX queues after HW initialization succeeded
  net: ravb: Make write access to CXR35 first before accessing other EMAC registers
  net: ravb: Use pm_runtime_resume_and_get()
  net: ravb: Check return value of reset_control_deassert()
  net: libwx: fix memory leak on msix entry
  ice: Fix VF Reset paths when interface in a failed over aggregate
  bpf, sockmap: Add af_unix test with both sockets in map
  bpf, sockmap: af_unix stream sockets need to hold ref for pair sock
  tools: ynl-gen: always construct struct ynl_req_state
  ethtool: don't propagate EOPNOTSUPP from dumps
  ravb: Fix races between ravb_tx_timeout_work() and net related ops
  r8169: prevent potential deadlock in rtl8169_close
  r8169: fix deadlock on RTL8125 in jumbo mtu mode
  neighbour: Fix __randomize_layout crash in struct neighbour
  octeontx2-pf: Restore TC ingress police rules when interface is up
  octeontx2-pf: Fix adding mbox work queue entry when num_vfs > 64
  net: stmmac: xgmac: Disable FPE MMC interrupts
  octeontx2-af: Fix possible buffer overflow
  ...

Pull pmdomain fix from Ulf Hansson:

 - Avoid polling for the scmi_perf_domain on arm

* tag 'pmdomain-v6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
  pmdomain: arm: Avoid polling for scmi_perf_domain

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Fix CQE error recovery path

  MMC host:
   - cqhci: Fix CQE error recovery path
   - sdhci-pci-gli: Fix initialization of LPM
   - sdhci-sprd: Fix enabling/disabling of the vqmmc regulator"

* tag 'mmc-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-sprd: Fix vqmmc not shutting down after the card was pulled
  mmc: sdhci-pci-gli: Disable LPM during initialization
  mmc: cqhci: Fix task clearing in CQE error recovery
  mmc: cqhci: Warn of halt or task clear failure
  mmc: block: Retry commands in CQE error recovery
  mmc: block: Be sure to wait while busy in CQE error recovery
  mmc: cqhci: Increase recovery halt timeout
  mmc: block: Do not lose cache flush during CQE error recovery

Pull LED fix from Lee Jones:

 - Remove duplicate sysfs entry 'color' from LEDs class

* tag 'leds-fixes-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds:
  leds: class: Don't expose color sysfs entry

Pull EFI fix from Ard Biesheuvel:

 - Fix for EFI unaccepted memory handling

* tag 'efi-urgent-for-v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi/unaccepted: Fix off-by-one when checking for overlapping ranges

syzbot was able to trigger a crash [1] in page_pool_unlist()

page_pool_list() only inserts a page pool into a netdev page pool list
if a netdev was set in params.

Even if the kzalloc() call in page_pool_create happens to initialize
pool->user.list, I chose to be more explicit in page_pool_list()
adding one INIT_HLIST_NODE().

We could test in page_pool_unlist() if netdev was set,
but since netdev can be changed to lo, it seems more robust to
check if pool->user.list is hashed  before calling hlist_del().

[1]

Illegal XDP return value 4294946546 on prog  (id 2) dev N/A, expect packet loss!
general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 0 PID: 5064 Comm: syz-executor391 Not tainted 6.7.0-rc2-syzkaller-00533-ga3799729 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023
RIP: 0010:__hlist_del include/linux/list.h:988 [inline]
RIP: 0010:hlist_del include/linux/list.h:1002 [inline]
RIP: 0010:page_pool_unlist+0xd1/0x170 net/core/page_pool_user.c:342
Code: df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 90 00 00 00 4c 8b a3 f0 06 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 e2 48 c1 ea 03 <80> 3c 02 00 75 68 48 85 ed 49 89 2c 24 74 24 e8 1b ca 07 f9 48 8d
RSP: 0018:ffffc900039ff768 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: ffff88814ae02000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffff88814ae026f0
RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff1d57fdc
R10: ffffffff8eabfee3 R11: ffffffff8aa0008b R12: 0000000000000000
R13: ffff88814ae02000 R14: dffffc0000000000 R15: 0000000000000001
FS:  000055555717a380(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000002555398 CR3: 0000000025044000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 __page_pool_destroy net/core/page_pool.c:851 [inline]
 page_pool_release+0x507/0x6b0 net/core/page_pool.c:891
 page_pool_destroy+0x1ac/0x4c0 net/core/page_pool.c:956
 xdp_test_run_teardown net/bpf/test_run.c:216 [inline]
 bpf_test_run_xdp_live+0x1578/0x1af0 net/bpf/test_run.c:388
 bpf_prog_test_run_xdp+0x827/0x1530 net/bpf/test_run.c:1254
 bpf_prog_test_run kernel/bpf/syscall.c:4041 [inline]
 __sys_bpf+0x11bf/0x4920 kernel/bpf/syscall.c:5402
 __do_sys_bpf kernel/bpf/syscall.c:5488 [inline]
 __se_sys_bpf kernel/bpf/syscall.c:5486 [inline]
 __x64_sys_bpf+0x78/0xc0 kernel/bpf/syscall.c:5486

Fixes: 083772c9 ("net: page_pool: record pools per netdev")
Reported-and-tested-by: syzbot+f9f8efb58a4db2ca98d0@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20231130092259.3797753-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Uwe Kleine-König says:

====================
net: ethernet: Convert to platform remove callback returning void

in (implicit) v1 of this series
(https://lore.kernel.org/netdev/20231117091655.872426-1-u.kleine-koenig@pengutronix.de)
I tried to address the resource leaks in the three cpsw drivers. However
this is hard to get right without being able to test the changes. So
here comes a series that just converts all drivers below
drivers/net/ethernet to use .remove_new() and adds a comment about the
potential leaks for someone else to fix the problem.

See commit 5c5a7680 ("platform: Provide a remove callback that
returns no value") for an extended explanation and the eventual goal.
The TL;DR; is to prevent bugs like the three noticed here.

Note this series results in no change of behaviour apart from improving
the error message for the three cpsw drivers from

	remove callback returned a non-zero value. This will be ignored.

to

	Failed to resume device (-ESOMETHING)
====================

Link: https://lore.kernel.org/r/20231128173823.867512-1-u.kleine-koenig@pengutronix.deSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Replace the error path returning a non-zero value by an error message
and a comment that there is more to do. With that this patch results in
no change of behaviour in this driver apart from improving the error
message.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Replace the error path returning a non-zero value by an error message
and a comment that there is more to do. With that this patch results in
no change of behaviour in this driver apart from improving the error
message.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Replace the error path returning a non-zero value by an error message
and a comment that there is more to do. With that this patch results in
no change of behaviour in this driver apart from improving the error
message.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Jiri Pirko says:

====================
devlink: warn about existing entities during reload-reinit

Recently there has been a couple of attempts from drivers to block
devlink reload in certain situations. Turned out, the drivers do not
properly tear down ports and related netdevs during reload.

To address this, add couple of checks to be done during devlink reload
reinit action. Also, extend documentation to be more explicit.
====================

Link: https://lore.kernel.org/r/20231128115255.773377-1-jiri@resnulli.usSigned-off-by: Paolo Abeni <pabeni@redhat.com>

During reload-reinit, all entities except for params, resources, regions
and health reporter should be removed and re-added. Add a warning to
be triggered in case the driver behaves differently.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Be more explicit about devlink entities that may stay and that have to
be removed during reload reinit action.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

It seems unnecessary that JSGT is tested twice (one before JSGE and one
after JSGE) since others are tested only once. Remove the duplicate JSGT
tests.

Fixes: 0bbaa02b ("bpf/tests: Add tests to check source register zero-extension")
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Link: https://lore.kernel.org/bpf/20231130034018.2144963-1-yujie.liu@intel.com

Claudiu Beznea says:

====================
net: ravb: Fixes for the ravb driver

This series adds some fixes for ravb driver. Patches in this series
were initilly part of series at [1].

Changes in v2:
- in description of patch 1/6 documented the addition of
  out_free_netdev goto label
- collected tags
- s/out_runtime_disable/out_rpm_disable in patch 2/6
- fixed typos in description of patch 6/6

Changes since [1]:
- addressed review comments
- added patch 6/6

[1] https://lore.kernel.org/all/20231120084606.4083194-1-claudiu.beznea.uj@bp.renesas.com/
====================

Link: https://lore.kernel.org/r/20231128080439.852467-1-claudiu.beznea.uj@bp.renesas.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

On RZ/G3S SMARC Carrier II board having RGMII connections b/w Ethernet
MACs and PHYs it has been discovered that doing unbind/bind for ravb
driver in a loop leads to wrong speed and duplex for Ethernet links and
broken connectivity (the connectivity cannot be restored even with
bringing interface down/up). Before doing unbind/bind the Ethernet
interfaces were configured though systemd. The sh instructions used to
do unbind/bind were:

$ cd /sys/bus/platform/drivers/ravb/
$ while :; do echo 11c30000.ethernet > unbind ; \
  echo 11c30000.ethernet > bind; done

It has been discovered that there is a race b/w IOCTLs initialized by
systemd at the response of success binding and the
"ravb_write(ndev, CCC_OPC_RESET, CCC)" call in ravb_remove() as
follows:

1/ as a result of bind success the user space open/configures the
   interfaces tough an IOCTL; the following stack trace has been
   identified on RZ/G3S:

Call trace:
dump_backtrace+0x9c/0x100
show_stack+0x20/0x38
dump_stack_lvl+0x48/0x60
dump_stack+0x18/0x28
ravb_open+0x70/0xa58
__dev_open+0xf4/0x1e8
__dev_change_flags+0x198/0x218
dev_change_flags+0x2c/0x80
devinet_ioctl+0x640/0x708
inet_ioctl+0x1e4/0x200
sock_do_ioctl+0x50/0x108
sock_ioctl+0x240/0x358
__arm64_sys_ioctl+0xb0/0x100
invoke_syscall+0x50/0x128
el0_svc_common.constprop.0+0xc8/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x34/0xb8
el0t_64_sync_handler+0xc0/0xc8
el0t_64_sync+0x190/0x198

2/ this call may execute concurrently with ravb_remove() as the
   unbind/bind operation was executed in a loop
3/ if the operation mode is changed to RESET (through
   ravb_write(ndev, CCC_OPC_RESET, CCC) call in ravb_remove())
   while the above ravb_open() is in progress it may lead to MAC
   (or PHY, or MAC-PHY connection, the right point hasn't been identified
   at the moment) to be broken, thus the Ethernet connectivity fails to
   restore.

The simple fix for this is to move ravb_write(ndev, CCC_OPC_RESET, CCC))
after unregister_netdev() to avoid resetting the controller while the
netdev interface is still registered.

To avoid future issues in ravb_remove(), the patch follows the proper order
of operations in ravb_remove(): reverse order compared with ravb_probe().
This avoids described races as the IOCTLs as well as unregister_netdev()
(called now at the beginning of ravb_remove()) calls rtnl_lock() before
continuing and IOCTLs check (though devinet_ioctl()) if device is still
registered just after taking the lock:

int devinet_ioctl(struct net *net, unsigned int cmd, struct ifreq *ifr)
{
	// ...

        rtnl_lock();

        ret = -ENODEV;
        dev = __dev_get_by_name(net, ifr->ifr_name);
        if (!dev)
                goto done;

	// ...
done:
        rtnl_unlock();
out:
        return ret;
}

Fixes: c156633f ("Renesas Ethernet AVB driver proper")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

In case ravb_phy_start() returns with error the settings applied in
ravb_dmac_init() are not reverted (e.g. config mode). For this call
ravb_stop_dma() on failure path of ravb_open().

Fixes: a0d2f206 ("Renesas Ethernet AVB PTP clock driver")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

ravb_phy_start() may fail. If that happens, the TX queues will remain
started. Thus, move the netif_tx_start_all_queues() after PHY is
successfully initialized.

Fixes: c156633f ("Renesas Ethernet AVB driver proper")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Hardware manual of RZ/G3S (and RZ/G2L) specifies the following on the
description of CXR35 register (chapter "PHY interface select register
(CXR35)"): "After release reset, make write-access to this register before
making write-access to other registers (except MDIOMOD). Even if not need
to change the value of this register, make write-access to this register
at least one time. Because RGMII/MII MODE is recognized by accessing this
register".

The setup procedure for EMAC module (chapter "Setup procedure" of RZ/G3S,
RZ/G2L manuals) specifies the E-MAC.CXR35 register is the first EMAC
register that is to be configured.

Note [A] from chapter "PHY interface select register (CXR35)" specifies
the following:
[A] The case which CXR35 SEL_XMII is used for the selection of RGMII/MII
in APB Clock 100 MHz.
(1) To use RGMII interface, Set ‘H’03E8_0000’ to this register.
(2) To use MII interface, Set ‘H’03E8_0002’ to this register.

Take into account these indication.

Fixes: 1089877a ("ravb: Add RZ/G2L MII interface support")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

pm_runtime_get_sync() may return an error. In case it returns with an error
dev->power.usage_count needs to be decremented. pm_runtime_resume_and_get()
takes care of this. Thus use it.

Fixes: c156633f ("Renesas Ethernet AVB driver proper")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>