- 23 Sep, 2022 31 commits
-
-
Zhengchao Shao authored
simplify code logic in hinic_ndo_set_vf_trust() and hinic_ndo_set_vf_spoofchk(). Signed-off-by:
Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Zhengchao Shao authored
The macro HINIC_WAIT_SRIOV_CFG_TIMEOUT is defined twice, remove one. Signed-off-by:
-
Zhengchao Shao authored
remove unused macro. Signed-off-by:
-
Zhengchao Shao authored
hinic_hwdev_max_num_qpas() and hinic_msix_attr_get() are no longer called, remove them. Also the macro HINIC_MSIX_ATTR_GET is also not called, remove it. Signed-off-by:
-
Zhengchao Shao authored
Functions are called only in one file, change their type to static. Signed-off-by:
-
Zhengchao Shao authored
The type of cmdq_free_page() hinic_set_pf_action() and link_status_event_handler() are void, modify the comments. Signed-off-by:
-
Jakub Kicinski authored
Zhengchao Shao says: ==================== refactor duplicate codes in the qdisc class walk function The walk implementation of most qdisc class modules is basically the same. That is, the values of count and skip are checked first. If count is greater than or equal to skip, the registered fn function is executed. Otherwise, increase the value of count. So the code can be refactored. The walk function is invoked during dump. Therefore, test cases related to the tdc filter need to be added. ==================== Link: https://lore.kernel.org/r/20220921024040.385296-1-shaozhengchao@huawei.comSigned-off-by:
-
Zhengchao Shao authored
Test 290a: Show RED class Signed-off-by:
Victor Nogueira <victor@mojatatu.com> Tested-by:
-
Zhengchao Shao authored
Test 2410: Show prio class Signed-off-by:
-
Zhengchao Shao authored
Test 1023: Show mq class Signed-off-by:
-
Zhengchao Shao authored
Test 0521: Show ingress class Signed-off-by:
-
Zhengchao Shao authored
Test 0582: Create QFQ with default setting Test c9a3: Create QFQ with class weight setting Test 8452: Create QFQ with class maxpkt setting Test d920: Create QFQ with multiple class setting Test 0548: Delete QFQ with handle Test 5901: Show QFQ class Signed-off-by:
-
Zhengchao Shao authored
Test cb28: Create NETEM with default setting Test a089: Create NETEM with limit flag Test 3449: Create NETEM with delay time Test 3782: Create NETEM with distribution and corrupt flag Test 2b82: Create NETEM with distribution and duplicate flag Test a932: Create NETEM with distribution and loss flag Test e01a: Create NETEM with distribution and loss state flag Test ba29: Create NETEM with loss gemodel flag Test 0492: Create NETEM with reorder flag Test 7862: Create NETEM with rate limit Test 7235: Create NETEM with multiple slot rate Test 5439: Create NETEM with multiple slot setting Test 5029: Change NETEM with loss state Test 3785: Replace NETEM with delay time Test 4502: Delete NETEM with handle Test 0785: Show NETEM class Signed-off-by:
-
Zhengchao Shao authored
Test 20ba: Add multiq Qdisc to multi-queue device (8 queues) Test 4301: List multiq Class Test 7832: Delete nonexistent multiq Qdisc Test 2891: Delete multiq Qdisc twice Test 1329: Add multiq Qdisc to single-queue device Signed-off-by:
-
Zhengchao Shao authored
Test 9903: Add mqprio Qdisc to multi-queue device (8 queues) Test 453a: Delete nonexistent mqprio Qdisc Test 5292: Delete mqprio Qdisc twice Test 45a9: Add mqprio Qdisc to single-queue device Test 2ba9: Show mqprio class Signed-off-by:
-
Zhengchao Shao authored
Test 0904: Create HTB with default setting Test 3906: Create HTB with default-N setting Test 8492: Create HTB with r2q setting Test 9502: Create HTB with direct_qlen setting Test b924: Create HTB with class rate and burst setting Test 4359: Create HTB with class mpu setting Test 9048: Create HTB with class prio setting Test 4994: Create HTB with class ceil setting Test 9523: Create HTB with class cburst setting Test 5353: Create HTB with class mtu setting Test 346a: Create HTB with class quantum setting Test 303a: Delete HTB with handle Signed-off-by:
-
Zhengchao Shao authored
Test 3254: Create HFSC with default setting Test 0289: Create HFSC with class sc and ul rate setting Test 846a: Create HFSC with class sc umax and dmax setting Test 5413: Create HFSC with class rt and ls rate setting Test 9312: Create HFSC with class rt umax and dmax setting Test 6931: Delete HFSC with handle Test 8436: Show HFSC class Signed-off-by:
-
Zhengchao Shao authored
Test 4957: Create FQ_CODEL with default setting Test 7621: Create FQ_CODEL with limit setting Test 6871: Create FQ_CODEL with memory_limit setting Test 5636: Create FQ_CODEL with target setting Test 630a: Create FQ_CODEL with interval setting Test 4324: Create FQ_CODEL with quantum setting Test b190: Create FQ_CODEL with noecn flag Test 5381: Create FQ_CODEL with ce_threshold setting Test c9d2: Create FQ_CODEL with drop_batch setting Test 523b: Create FQ_CODEL with multiple setting Test 9283: Replace FQ_CODEL with noecn setting Test 3459: Change FQ_CODEL with limit setting Test 0128: Delete FQ_CODEL with handle Test 0435: Show FQ_CODEL class Signed-off-by:
-
Zhengchao Shao authored
Test 6345: Create DSMARK with default setting Test 3462: Create DSMARK with default_index setting Test ca95: Create DSMARK with set_tc_index flag Test a950: Create DSMARK with multiple setting Test 4092: Delete DSMARK with handle Test 5930: Show DSMARK class Signed-off-by:
-
Zhengchao Shao authored
Test 0385: Create DRR with default setting Test 2375: Delete DRR with handle Test 3092: Show DRR class Signed-off-by:
-
Zhengchao Shao authored
Test 1820: Create CBS with default setting Test 1532: Create CBS with hicredit setting Test 2078: Create CBS with locredit setting Test 9271: Create CBS with sendslope setting Test 0482: Create CBS with idleslope setting Test e8f3: Create CBS with multiple setting Test 23c9: Replace CBS with sendslope setting Test a07a: Change CBS with idleslope setting Test 43b3: Delete CBS with handle Test 9472: Show CBS class Signed-off-by:
-
Zhengchao Shao authored
Test 3460: Create CBQ with default setting Test 0592: Create CBQ with mpu Test 4684: Create CBQ with valid cell num Test 4345: Create CBQ with invalid cell num Test 4525: Create CBQ with valid ewma Test 6784: Create CBQ with invalid ewma Test 5468: Delete CBQ with handle Test 492a: Show CBQ class Signed-off-by:
-
Zhengchao Shao authored
Test 1212: Create CAKE with default setting Test 3281: Create CAKE with bandwidth limit Test c940: Create CAKE with autorate-ingress flag Test 2310: Create CAKE with rtt time Test 2385: Create CAKE with besteffort flag Test a032: Create CAKE with diffserv8 flag Test 2349: Create CAKE with diffserv4 flag Test 8472: Create CAKE with flowblind flag Test 2341: Create CAKE with dsthost and nat flag Test 5134: Create CAKE with wash flag Test 2302: Create CAKE with flowblind and no-split-gso flag Test 0768: Create CAKE with dual-srchost and ack-filter flag Test 0238: Create CAKE with dual-dsthost and ack-filter-aggressive flag Test 6572: Create CAKE with memlimit and ptm flag Test 2436: Create CAKE with fwmark and atm flag Test 3984: Create CAKE with overhead and mpu Test 5421: Create CAKE with conservative and ingress flag Test 6854: Delete CAKE with conservative and ingress flag Test 2342: Replace CAKE with mpu Test 2313: Change CAKE with mpu Test 4365: Show CAKE class Signed-off-by:
Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by:
-
Zhengchao Shao authored
use tc_qdisc_stats_dump() in qdisc. Signed-off-by:
-
Zhengchao Shao authored
The walk implementation of most qdisc class modules is basically the same. That is, the values of count and skip are checked first. If count is greater than or equal to skip, the registered fn function is executed. Otherwise, increase the value of count. So we can reconstruct them. Signed-off-by:
-
Vladimir Oltean authored
The 3 functions that want access to the taprio_list: taprio_dev_notifier(), taprio_destroy() and taprio_init() are all called with the rtnl_mutex held, therefore implicitly serialized with respect to each other. A spin lock serves no purpose. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by:
Vinicius Costa Gomes <vinicius.gomes@intel.com> Link: https://lore.kernel.org/r/20220921095632.1379251-1-vladimir.oltean@nxp.comSigned-off-by:
-
Jakub Kicinski authored
Gal Pressman says: ==================== Support 256 bit TLS keys with device offload This series adds support for 256 bit TLS keys with device offload, and a cleanup patch to remove repeating code: - Patches #1-2 add cipher sizes descriptors which allow reducing the amount of code duplications. - Patch #3 allows 256 bit keys to be TX offloaded in the tls module (RX already supported). - Patch #4 adds 256 bit keys support to the mlx5 driver. ==================== Link: https://lore.kernel.org/r/20220920130150.3546-1-gal@nvidia.comSigned-off-by:
-
Gal Pressman authored
Add support for 256 bit TLS keys using device offload. Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
Gal Pressman <gal@nvidia.com> Signed-off-by:
-
Gal Pressman authored
Add the missing clause for 256 bit keys in tls_set_device_offload(), and the needed adjustments in tls_device_fallback.c. Reviewed-by:
-
Gal Pressman authored
Use the newly introduced cipher sizes structs instead of the repeated switch cases churn. Reviewed-by:
-
Tariq Toukan authored
Introduce cipher sizes descriptor. It helps reducing the amount of code duplications and repeated switch/cases that assigns the proper sizes according to the cipher type. Signed-off-by:
-
- 22 Sep, 2022 9 commits
-
-
Vadim Fedorenko authored
Any change to the hardware timestamps configuration triggers nic restart, which breaks transmition and reception of network packets for a while. But there is no need to fully restart the device because while configuring hardware timestamps. The code for changing configuration runs after all of the initialisation, when the NIC is actually up and running. This patch changes the code that ioctl will only update configuration registers and will not trigger carrier status change, but in case of timestamps for all rx packetes it fallbacks to close()/open() sequnce because of synchronization issues in the hardware. Tested on BCM57504. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by:
Vadim Fedorenko <vfedorenko@novek.ru> Reviewed-by:
Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20220922191038.29921-1-vfedorenko@novek.ruSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
drivers/net/ethernet/freescale/fec.h 7b15515f ("Revert "fec: Restart PPS after link state change"") 40c79ce1 ("net: fec: add stop mode support for imx8 platform") https://lore.kernel.org/all/20220921105337.62b41047@canb.auug.org.au/ drivers/pinctrl/pinctrl-ocelot.c c297561b ("pinctrl: ocelot: Fix interrupt controller") 181f604b ("pinctrl: ocelot: add ability to be used in a non-mmio configuration") https://lore.kernel.org/all/20220921110032.7cd28114@canb.auug.org.au/ tools/testing/selftests/drivers/net/bonding/Makefile bbb774d9 ("net: Add tests for bonding and team address list management") 152e8ec7 ("selftests/bonding: add a test for bonding lladdr target") https://lore.kernel.org/all/20220921110437.5b7dbd82@canb.auug.org.au/ drivers/net/can/usb/gs_usb.c 5440428b ("can: gs_usb: gs_can_open(): fix race dev->can.state condition") 45dfa45f ("can: gs_usb: add RX and TX hardware timestamp support") https://lore.kernel.org/all/84f45a7d-92b6-4dc5-d7a1-072152fab6ff@tessares.net/Signed-off-by:
-
Horatiu Vultur authored
Inside the function lan8814_config_intr, there are double spaces when assigning the return value of phy_write to err. Suggested-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220921065444.637067-1-horatiu.vultur@microchip.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from wifi, netfilter and can. A handful of awaited fixes here - revert of the FEC changes, bluetooth fix, fixes for iwlwifi spew. We added a warning in PHY/MDIO code which is triggering on a couple of platforms in a false-positive-ish way. If we can't iron that out over the week we'll drop it and re-add for 6.1. I've added a new "follow up fixes" section for fixes to fixes in 6.0-rcs but it may actually give the false impression that those are problematic or that more testing time would have caught them. So likely a one time thing. Follow up fixes: - nf_tables_addchain: fix nft_counters_enabled underflow - ebtables: fix memory leak when blob is malformed - nf_ct_ftp: fix deadlock when nat rewrite is needed Current release - regressions: - Revert "fec: Restart PPS after link state change" and the related "net: fec: Use a spinlock to guard `fep->ptp_clk_on`" - Bluetooth: fix HCIGETDEVINFO regression - wifi: mt76: fix 5 GHz connection regression on mt76x0/mt76x2 - mptcp: fix fwd memory accounting on coalesce - rwlock removal fall out: - ipmr: always call ip{,6}_mr_forward() from RCU read-side critical section - ipv6: fix crash when IPv6 is administratively disabled - tcp: read multiple skbs in tcp_read_skb() - mdio_bus_phy_resume state warning fallout: - eth: ravb: fix PHY state warning splat during system resume - eth: sh_eth: fix PHY state warning splat during system resume Current release - new code bugs: - wifi: iwlwifi: don't spam logs with NSS>2 messages - eth: mtk_eth_soc: enable XDP support just for MT7986 SoC Previous releases - regressions: - bonding: fix NULL deref in bond_rr_gen_slave_id - wifi: iwlwifi: mark IWLMEI as broken Previous releases - always broken: - nf_conntrack helpers: - irc: tighten matching on DCC message - sip: fix ct_sip_walk_headers - osf: fix possible bogus match in nf_osf_find() - ipvlan: fix out-of-bound bugs caused by unset skb->mac_header - core: fix flow symmetric hash - bonding, team: unsync device addresses on ndo_stop - phy: micrel: fix shared interrupt on LAN8814" * tag 'net-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits) selftests: forwarding: add shebang for sch_red.sh bnxt: prevent skb UAF after handing over to PTP worker net: marvell: Fix refcounting bugs in prestera_port_sfp_bind() net: sched: fix possible refcount leak in tc_new_tfilter() net: sunhme: Fix packet reception for len < RX_COPY_THRESHOLD udp: Use WARN_ON_ONCE() in udp_read_skb() selftests: bonding: cause oops in bond_rr_gen_slave_id bonding: fix NULL deref in bond_rr_gen_slave_id net: phy: micrel: fix shared interrupt on LAN8814 net/smc: Stop the CLC flow if no link to map buffers on ice: Fix ice_xdp_xmit() when XDP TX queue number is not sufficient net: atlantic: fix potential memory leak in aq_ndev_close() can: gs_usb: gs_usb_set_phys_id(): return with error if identify is not supported can: gs_usb: gs_can_open(): fix race dev->can.state condition can: flexcan: flexcan_mailbox_read() fix return value for drop = true net: sh_eth: Fix PHY state warning splat during system resume net: ravb: Fix PHY state warning splat during system resume netfilter: nf_ct_ftp: fix deadlock when nat rewrite is needed netfilter: ebtables: fix memory leak when blob is malformed netfilter: nf_tables: fix percpu memory leak at nf_tables_addchain() ... -
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efiLinus Torvalds authored
Pull EFI fixes from Ard Biesheuvel: - Use the right variable to check for shim insecure mode - Wipe setup_data field when booting via EFI - Add missing error check to efibc driver * tag 'efi-urgent-for-v6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi: libstub: check Shim mode using MokSBStateRT efi: x86: Wipe setup_data on pure EFI boot efi: efibc: Guard against allocation failure
-
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linuxLinus Torvalds authored
Pull gpio fixes from Bartosz Golaszewski: - fix a NULL-pointer dereference at driver unbind and a potential resource leak in error path in gpio-mockup - make the irqchip immutable in gpio-ftgpio010 - fix dereferencing a potentially uninitialized variable in gpio-tqmx86 - fix interrupt registering in gpiolib's character device code * tag 'gpio-fixes-for-v6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpiolib: cdev: Set lineevent_state::irq after IRQ register successfully gpio: tqmx86: fix uninitialized variable girq gpio: ftgpio010: Make irqchip immutable gpio: mockup: Fix potential resource leakage when register a chip gpio: mockup: fix NULL pointer dereference when removing debugfs
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v6.0-2022-09-21' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix polling of system-wide events related to mixing per-cpu and per-thread events. - Do not check if /proc/modules is unchanged when copying /proc/kcore, that doesn't get in the way of post processing analysis. - Include program header in ELF files generated for JIT files, so that they can be opened by tools using elfutils libraries. - Enter namespaces when synthesizing build-ids. - Fix some bugs related to a recent cpu_map overhaul where we should be using an index and not the cpu number. - Fix BPF program ELF section name, using the naming expected by libbpf when using BPF counters in 'perf stat'. - Add a new test for perf stat cgroup BPF counter. - Adjust check on 'perf test wp' for older kernels, where the PERF_EVENT_IOC_MODIFY_ATTRIBUTES ioctl isn't supported. - Sync x86 cpufeatures with the kernel sources, no changes in tooling. * tag 'perf-tools-fixes-for-v6.0-2022-09-21' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf tools: Honor namespace when synthesizing build-ids tools headers cpufeatures: Sync with the kernel sources perf kcore_copy: Do not check /proc/modules is unchanged libperf evlist: Fix polling of system-wide events perf record: Fix cpu mask bit setting for mixed mmaps perf test: Skip wp modify test on old kernels perf jit: Include program header in ELF files perf test: Add a new test for perf stat cgroup BPF counter perf stat: Use evsel->core.cpus to iterate cpus in BPF cgroup counters perf stat: Fix cpu map index in bperf cgroup code perf stat: Fix BPF program section name
-
Hangbin Liu authored
RHEL/Fedora RPM build checks are stricter, and complain when executable files don't have a shebang line, e.g. *** WARNING: ./kselftests/net/forwarding/sch_red.sh is executable but has no shebang, removing executable bit Fix it by adding shebang line. Fixes: 6cf0291f ("selftests: forwarding: Add a RED test for SW datapath") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Reviewed-by:
Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/20220922024453.437757-1-liuhangbin@gmail.comSigned-off-by:
-
Jakub Kicinski authored
When reading the timestamp is required bnxt_tx_int() hands over the ownership of the completed skb to the PTP worker. The skb should not be used afterwards, as the worker may run before the rest of our code and free the skb, leading to a use-after-free. Since dev_kfree_skb_any() accepts NULL make the loss of ownership more obvious and set skb to NULL. Fixes: 83bb623c ("bnxt_en: Transmit and retrieve packet timestamps") Reviewed-by:
Andy Gospodarek <gospo@broadcom.com> Reviewed-by:
-
