Merge tag 'sunxi-defconfig-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/defconfig

Pull "Allwinner defconfig changes for 4.11" from Maxime Ripard:

A single patch to enable the thermal DT support in sunxi_defconfig

* tag 'sunxi-defconfig-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  ARM: sunxi: Add CONFIG_THERMAL_OF

Enable the NAND framework and the Denali NAND controller driver.
This NAND controller is used on UniPhier SoCs.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Enable the block layer support for MTD devices.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'imx-defconfig-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig

i.MX defconfig updates for 4.11:
 - Select wireless extensions option for imx_v6_v7_defconfig, so that
   wireless works out of box with userspace tools such as 'iwconfig'.
 - Enable EXT4 filesystem support for vf610m4_defconfig.

* tag 'imx-defconfig-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: vf610m4: defconfig: enable EXT4 filesystem
  ARM: imx_v6_v7_defconfig: Select wireless extensions option
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'stm32-defconfig-for-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/defconfig

STM32 defconfig updates for v4.11, round 1.

Highlights:
----------
 - Enable ADC
 - Enable RTC

* tag 'stm32-defconfig-for-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
  ARM: configs: stm32: Add RTC support in STM32 defconfig
  ARM: configs: stm32: enable ADC driver
Signed-off-by: Olof Johansson <olof@lixom.net>

ARM64: hisilicon: defconfig updates for 4.11

- Enable ARM_SMMU_V3 in the arm64 defconfig
- Enable NUMA and NUMA_BALANCING in the arm64 defconfig

* tag 'hisi-defconfig-for-4.11' of git://github.com/hisilicon/linux-hisi:
  arm64: defconfig: Enable NUMA and NUMA_BALANCING
  arm64: defconfig: enable SMMUv3 config
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v4.11/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig

Few omap2plus_defconfig changes for v4.11 merge window:

- Switch to use LIS3LV02DL IIO driver instead of the
  LIS3LC02D misc driver
- Set CONFIG_SERIAL_8250_RUNTIME_UARTS=6 to avoid runtime
  warnings on omap5 and dra7
- Enable ksz9021 phy and m41t80 rtc as they are used at
  least on phyCORE-AM335x

* tag 'omap-for-v4.11/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: omap2plus_defconfig: Enable support for RTC M41T80
  ARM: omap2plus_defconfig: Enable support for micrell phys
  ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6
  ARM: defconfig: omap2plus: switch LIS3LV02DL driver
Signed-off-by: Olof Johansson <olof@lixom.net>

Import a minimal defconfig for tango4 boards.
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'davinci-for-v4.11/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/defconfig

Enable config options for DaVinci
VPIF, LCDC, PWM, Pull up/down pinconf
driver and IIO in davinci_all_defconfig

* tag 'davinci-for-v4.11/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci_all_defconfig: enable iio
  ARM: davinci_all_defconfig: Enable PWM modules
  ARM: davinci_all_defconfig: enable DA8xx pinconf
  ARM: davinci_all_defconfig: enable pwm-beeper
  ARM: davinci_all_defconfig: enable dumb vga-dac drm bridge
  ARM: davinci_all_defconfig: enable video capture as modules
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'qcom-defconfig-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/defconfig

Qualcomm ARM Based defconfig Updates for v4.11

* Enable APQ8060 Dragonboard related devices
* Enable AHCI, PCIE, USB, thermal sensors, and ATL1C related configs
* Enable RPM/RPM-SMD clocks

* tag 'qcom-defconfig-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  ARM: defconfig: qcom: add APQ8060 DragonBoard devices
  ARM: qcom_defconfig: enable thermal sensors
  ARM: qcom_defconfig: add ahci configs
  ARM: qcom_defconfig: add pcie and atl1c ethernet configs
  ARM: qcom_defconfig: add usb related configs
  ARM: qcom_defconfig: Enable RPM/RPM-SMD clocks
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'keystone_config_for_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/defconfig

ARM: Keystone config support for 4.11

 - Enable Reset controller and on chip MSM RAM support.

* tag 'keystone_config_for_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  ARM: Keystone: Enable ARCH_HAS_RESET_CONTROLLER
  ARM: configs: keystone: Enable Generic on-chip SRAM driver
Signed-off-by: Olof Johansson <olof@lixom.net>

The phyCORE-AM335x SoM has a RV4162 RTC populated which is supported
by the M41T80 driver. Enabled it so make the RTC support on the SoM
available.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The phyCORE-AM335x SoM with PCM-953 carrierboard has a
KSZ9021 phy mounted. To add support for this we need to enable
the micrell phy driver in the config.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Enable EXT4_FS to have rootfs in EXT[2-4].

Other changes are result of savedefconfig keeping minimal config (even
without enabling EXT4_FS, these would be present).
Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

We have more than four uarts on some SoCs and that can cause
noise with errors while booting.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Since much more arm64 SoCs with numa nodes, it's better to enable
NUMA and NUMA_BALANCING to improve the performance on test.

Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

This enables the iio subsystem. This will be used by LEGO MINDSTORMS EV3,
which has an ADS7957 chip.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

The Keystone 2 family of SoCs will use various Reset Controller
drivers for managing the resets of remote processor devices like
DSPs on the SoC, so select the ARCH_HAS_RESET_CONTROLLER option
by default to enable the Reset framework.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>

Merge tag 'aspeed-4.11-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into next/defconfig

Aspeed defconfig updates for 4.11

Just the one commit that updates our defconfigs with network (ftgmac100
and ncsi), bt ipmi, gpio and ncsi.

* tag 'aspeed-4.11-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
  ARM: configs: Update Aspeed with new drivers
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'at91-ab-4.11-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/defconfig

defconfig for 4.11:

 - Add driver support for the Axentia TSE-850

* tag 'at91-ab-4.11-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  ARM: sama5_defconfig: add support for the Axentia TSE-850 board
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'samsung-defconfig-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/defconfig

Samsung defconfig update for v4.11:
1. Cleanup from old MACHs in s5pv210.
2. Enable IP_MULTICAST for libnss-mdns.

* tag 'samsung-defconfig-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: exynos_defconfig: Enable IP multicast
  ARM: s5pv210_defconfig: Remove old MACHs
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'socfpga_defconfig_updates_for_v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/defconfig

SoCFPGA defconfig updates for v4.11
- enables Marvell PHY support
- enable MTD(I2C EEPROM), and NAND support
- enable SPI, RTC and LED support
- enables OF CONFIGFS to support DTS overlays
- enables more FS options
- enables A10 hwmon support

* tag 'socfpga_defconfig_updates_for_v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  ARM: socfpga_defconfig: update defconfig for SoCFPGA
Signed-off-by: Olof Johansson <olof@lixom.net>

This patch adds STM32 RTC support in stm32_defconfig file.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>

This default-enables the devices found on the APQ8060 DragonBoard
in the qcom_defconfig:

- EBI2 bus
- SMSC911x ethernet
- LEDs class and PM8058 LEDs driver, trigger and heartbeat
  trigger (so we get heartbeat on the board by default)
- IIO framework, including the HRTimer trigger, KXSD9
  accelerometer, MPU3050 gyroscope, AK8975 magnetometer and
  BMP085 pressure sensor
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

This patch enables thermal sensors and QFPROM support for qcom platforms.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

This patch enables configs required to get SATA functionality working on
IFC6410 board.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

IFC6410 board has PCIE based ATL1C ethernet controller, so enable related configs.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

Enable support for clocks, controlled by the RPM processor on
Qualcomm platforms.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

The Axentia TSE-850 is a SAMA5D3-based device designed to generate
FM subcarrier signals.
Signed-off-by: Peter Rosin <peda@axentia.se>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

We have upstream support for ftgmac100 ethernet with NCSI, GPIO, pinmux,
and IPMI BT. Enable these for both g4 and g5 platforms.
Signed-off-by: Joel Stanley <joel@jms.id.au>

This enables PWM and the TI ECAP and EHRWPM modules. These are used on LEGO
MINDSTORMS EV3.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

This enables the DA8xx pinconf driver by default. It is needed by LEGO
MINDSTORMS EV3.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

Merge tag 'renesas-defconfig-for-v4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig

Renesas ARM Based SoC Defconfig Updates for v4.11

Enable:
* Recently added Enable r8a774[35] SoCs
* CMA for DMA to allow use of VIN with large frame sizes
* CONFIG_VIDEO_ADV7604 to allow use of HDMI input

* tag 'renesas-defconfig-for-v4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: multi_v7_defconfig: Enable r8a774[35] SoCs
  ARM: shmobile: defconfig: Enable r8a774[35] SoCs
  ARM: shmobile: defconfig: Enable CMA for DMA
  ARM: shmobile: defconfig: Enable CONFIG_VIDEO_ADV7604
Signed-off-by: Olof Johansson <olof@lixom.net>

The PXA defconfig compiles the legacy MPU3050 driver as a module,
but the device does not appear in device trees nor board files, so
remove this from the defconfig assuming it was a mistake to add it
in the first place.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

The Tegra is currently configured to use the old input driver for the
MPU-3050. Switch to the new IIO driver.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

The multi_v7 config enable the MPU3050 gyro input driver, but
there is now a dedicated IIO gyro driver for the same component,
which is the right subsystem to handle this. Replace it in the
defconfig. As we want the full IIO featureset and as other v7
systems will likely enjoy using IIO for their sensor work (such
as the Android-to-IIO userspace HAL), we take this opportunity to
turn on the standard sensor HRtimer triggering.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

This patch enables the Qualcomm RPM based Clock Controller present on
A-family boards.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

ADC driver depends on REGULATOR and IIO that are not yet selected.
Current hardware boards (like stm32f429i-eval) is using fixed
regulators.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>