Use devm_kzalloc(), devm_request_mem_region() ande devm_ioremap()
to simplify the code.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Convert omap_wdt to new watchdog core. On OMAP boards, there are usually
multiple watchdogs. Since the new watchdog core supports multiple
watchdogs, all watchdog drivers used on OMAP should be converted.

The legacy watchdog device node is still created, so this should not
break existing users.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Tested-by: Jarkko Nikula <jarkko.nikula@jollamobile.com>
Tested-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Convert clk_enable/clk_disable to clk_prepare_enable/clk_disable_unprepare
calls as required by common clock framework.
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

With device tree support in place, we should not use IMX_HAVE_PLATFORM_IMX2_WDT
as a dependency for selecting the imx2_wdt driver.

Use ARCH_MXC symbol instead, so that the driver can be even selected by a device-tree
only SoC, such as i.MX6.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

We do a setup_timer at init stage of the module, but we didn't
de-activate the time using del_timer.
Signed-off-by: devendra.aaru <devendra.aaru@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Changing the version of the driver for all the latest patches being applied
for kdump fixes.
Signed-off-by: Thomas Mingarelli <thomas.mingarelli@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Convert the twl4030_wdt watchdog driver to watchdog core.

While at there use devm_kzalloc and set the default timeout in order to be
able test this driver with a simple shell script.
Signed-off-by: Jarkko Nikula <jarkko.nikula@jollamobile.com>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

As a first step towards migrating davinci platforms to use common clock
framework, replace all instances of clk_enable() with clk_prepare_enable()
and clk_disable() with clk_disable_unprepare(). Until the platform is
switched to use the CONFIG_HAVE_CLK_PREPARE Kconfig variable, this just
adds a might_sleep() call and would work without any issues.

This will make it easy later to switch to common clk based implementation
of clk driver from DaVinci specific driver.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Clk_prepare_enable and clk_disable_unprepare combine clk_prepare and
clk_enable, and clk_disable and clk_unprepare.  They make the code more
concise, and ensure that clk_unprepare is called when clk_enable fails.

A simplified version of the semantic patch that introduces calls to these
functions is as follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e;
@@

- clk_prepare(e);
- clk_enable(e);
+ clk_prepare_enable(e);

@@
expression e;
@@

- clk_disable(e);
- clk_unprepare(e);
+ clk_disable_unprepare(e);
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

This makes the code a bit smaller by getting rid of
some boilerplate code.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Pull Xtensa patchset from Chris Zankel:
 "This contains support of device trees, many fixes, and code clean-ups"

* tag 'xtensa-20121218' of git://github.com/czankel/xtensa-linux: (33 commits)
  xtensa: don't try to build DTB when OF is disabled
  xtensa: set the correct ethernet address for xtfpga
  xtensa: clean up files to make them code-style compliant
  xtensa: provide endianness macro for sparse
  xtensa: fix RASID SR initialization
  xtensa: initialize CPENABLE SR when core has one
  xtensa: reset all timers on initialization
  Use for_each_compatible_node() macro.
  xtensa: add XTFPGA DTS
  xtensa: add support for the XTFPGA boards
  xtensa: add device trees support
  xtensa: add IRQ domains support
  xtensa: add U-Boot image support (uImage).
  xtensa: clean up boot make rules
  xtensa: fix mb and wmb definitions
  xtensa: add s32c1i-based spinlock implementations
  xtensa: add s32c1i-based bitops implementations
  xtensa: add s32c1i-based atomic ops implementations
  xtensa: add s32c1i sanity check
  xtensa: add trap_set_handler function
  ...

Pull one final 386 removal patch from Peter Anvin.

IRQ 13 FPU error handling is gone.  That was not one of the proudest
moments in PC history.

* 'x86/nuke386' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, 386 removal: Remove support for IRQ 13 FPU error reporting

Pull small x86 fixes from Peter Anvin:
 "A collection of very small fixes, mostly pure documentation."

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, doc: Document that bootloader ID 4 is used also by iPXE
  x86, doc: Add a formal bootloader ID for kexec-tools
  x86, 8042: Enable A20 using KBC to fix S3 resume on some MSI laptops

Pull MTD updates from David Woodhouse:
 - Various cleanups especially in NAND tests
 - Add support for NAND flash on BCMA bus
 - DT support for sh_flctl and denali NAND drivers
 - Kill obsolete/superceded drivers (fortunet, nomadik_nand)
 - Fix JFFS2 locking bug in ENOMEM failure path
 - New SPI flash chips, as usual
 - Support writing in 'reliable mode' for DiskOnChip G4
 - Debugfs support in nandsim

* tag 'for-linus-20121219' of git://git.infradead.org/linux-mtd: (96 commits)
  mtd: nand: typo in nand_id_has_period() comments
  mtd: nand/gpio: use io{read,write}*_rep accessors
  mtd: block2mtd: throttle writes by calling balance_dirty_pages_ratelimited.
  mtd: nand: gpmi: reset BCH earlier, too, to avoid NAND startup problems
  mtd: nand/docg4: fix and improve read of factory bbt
  mtd: nand/docg4: reserve bb marker area in ecclayout
  mtd: nand/docg4: add support for writing in reliable mode
  mtd: mxc_nand: reorder part_probes to let cmdline override other sources
  mtd: mxc_nand: fix unbalanced clk_disable() in error path
  mtd: nandsim: Introduce debugfs infrastructure
  mtd: physmap_of: error checking to prevent a NULL pointer dereference
  mtg: docg3: potential divide by zero in doc_write_oob()
  mtd: bcm47xxnflash: writing support
  mtd: tests/read: initialize buffer for whole next page
  mtd: at91: atmel_nand: return bit flips for the PMECC read_page()
  mtd: fix recovery after failed write-buffer operation in cfi_cmdset_0002.c
  mtd: nand: onfi need to be probed in 8 bits mode
  mtd: nand: add NAND_BUSWIDTH_AUTO to autodetect bus width
  mtd: nand: print flash size during detection
  mted: nand_wait_ready timeout fix
  ...

Commit 8d451690 ("watchdog: Fix CPU hotplug regression") causes an
oops or hard lockup when doing

 echo 0 > /proc/sys/kernel/nmi_watchdog
 echo 1 > /proc/sys/kernel/nmi_watchdog

and the kernel is booted with nmi_watchdog=1 (default)

Running laptop-mode-tools and disconnecting/connecting AC power will
cause this to trigger, making it a common failure scenario on laptops.

Instead of bailing out of watchdog_disable() when !watchdog_enabled we
can initialize the hrtimer regardless of watchdog_enabled status.  This
makes it safe to call watchdog_disable() in the nmi_watchdog=0 case,
without the negative effect on the enabled => disabled => enabled case.

All these tests pass with this patch:
- nmi_watchdog=1
  echo 0 > /proc/sys/kernel/nmi_watchdog
  echo 1 > /proc/sys/kernel/nmi_watchdog

- nmi_watchdog=0
  echo 0 > /sys/devices/system/cpu/cpu1/online

- nmi_watchdog=0
  echo mem > /sys/power/state

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=51661

Cc: <stable@vger.kernel.org> # v3.7
Cc: Norbert Warmuth <nwarmuth@t-online.de>
Cc: Joseph Salisbury <joseph.salisbury@canonical.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull pwm changes from Thierry Reding:
 "A new driver has been added for the SPEAr platform and the
  TWL4030/6030 driver has been replaced by two drivers that control the
  regular PWMs and the PWM driven LEDs provided by the chips.

  The vt8500, tiecap, tiehrpwm, i.MX, LPC32xx and Samsung drivers have
  all been improved and the device tree bindings now support the PWM
  signal polarity."

Fix up trivial conflicts due to __devinit/exit removal.

* tag 'for-3.8-rc1' of git://gitorious.org/linux-pwm/linux-pwm: (21 commits)
  pwm: samsung: add missing s3c->pwm_id assignment
  pwm: lpc32xx: Set the chip base for dynamic allocation
  pwm: lpc32xx: Properly disable the clock on device removal
  pwm: lpc32xx: Fix the PWM polarity
  pwm: i.MX: eliminate build warning
  pwm: Export of_pwm_xlate_with_flags()
  pwm: Remove pwm-twl6030 driver
  pwm: New driver to support PWM driven LEDs on TWL4030/6030 series of PMICs
  pwm: New driver to support PWMs on TWL4030/6030 series of PMICs
  pwm: pwm-tiehrpwm: pinctrl support
  pwm: tiehrpwm: Add device-tree binding
  pwm: pwm-tiehrpwm: Adding TBCLK gating support.
  pwm: pwm-tiecap: pinctrl support
  pwm: tiecap: Add device-tree binding
  pwm: Add TI PWM subsystem driver
  pwm: Device tree support for PWM polarity
  pwm: vt8500: Ensure PWM clock is enabled during pwm_config
  pwm: vt8500: Fix build error
  pwm: spear: Staticize spear_pwm_config()
  pwm: Add SPEAr PWM chip driver support
  ...

Pull battery update, part 2, from Anton Vorontsov:
 "These are left overs that I didn't have time to review/apply before
  the merge window opened.  I didn't want to "spoil" the first pull
  request with these late patches, so they were not included:

   - A small patch for the RX51 OMAP board (Nokia N900 phone), the patch
     creates a battery monitor device instance, so that it can be
     probed.  It was acked by the OMAP maintainer;

   - A couple of late bug fixes for the charger-manager: corrects corner
     cases for the battery full handling."

* tag 'for-v3.8-part2' of git://git.infradead.org/battery-2.6:
  charger-manager: Fix bug when check dropped voltage after fullbatt event
  charger-manager: Fix bug related to checking fully charged state of battery
  ARM: OMAP: rx51: Register platform device for rx51_battery

Pull module update from Rusty Russell:
 "Nothing all that exciting; a new module-from-fd syscall for those who
  want to verify the source of the module (ChromeOS) and/or use standard
  IMA on it or other security hooks."

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  MODSIGN: Fix kbuild output when using default extra_certificates
  MODSIGN: Avoid using .incbin in C source
  modules: don't hand 0 to vmalloc.
  module: Remove a extra null character at the top of module->strtab.
  ASN.1: Use the ASN1_LONG_TAG and ASN1_INDEFINITE_LENGTH constants
  ASN.1: Define indefinite length marker constant
  moduleparam: use __UNIQUE_ID()
  __UNIQUE_ID()
  MODSIGN: Add modules_sign make target
  powerpc: add finit_module syscall.
  ima: support new kernel module syscall
  add finit_module syscall to asm-generic
  ARM: add finit_module syscall to ARM
  security: introduce kernel_module_from_file hook
  module: add flags arg to sys_finit_module()
  module: add syscall to load module from fd

Pull preparatory gcc intrisics bswap patch from David Woodhouse:
 "This single patch is effectively a no-op for now.  It enables
  architectures to opt in to using GCC's __builtin_bswapXX() intrinsics
  for byteswapping, and if we merge this now then the architecture
  maintainers can enable it for their arch during the next cycle without
  dependency issues.

  It's worth making it a par-arch opt-in, because although in *theory*
  the compiler should never do worse than hand-coded assembler (and of
  course it also ought to do a lot better on platforms like Atom and
  PowerPC which have load-and-swap or store-and-swap instructions), that
  isn't always the case.  See

     http://gcc.gnu.org/bugzilla/show_bug.cgi?id=46453

  for example."

* tag 'byteswap-for-linus-20121219' of git://git.infradead.org/users/dwmw2/byteswap:
  byteorder: allow arch to opt to use GCC intrinsics for byteswapping

Commit 8dd2cb7e ("block: discard granularity might not be power of
2") changed a couple of 'binary and' operations into modulus operations.
Which turned the harmless case of a zero discard_granularity into a
possible divide-by-zero.

The code also had a much more subtle bug: it was doing the modulus of a
value in bytes using 'sector_t'.  That was always conceptually wrong,
but didn't actually matter back when the code assumed a power-of-two
granularity: we only looked at the low bits anyway.

But with potentially arbitrary sector numbers, using a 'sector_t' to
express bytes is very very wrong: depending on configuration it limits
the starting offset of the device to just 32 bits, and any overflow
would result in a wrong value if the modulus wasn't a power-of-two.

So re-write the code to not only protect against the divide-by-zero, but
to do the starting sector arithmetic in sectors, and using the proper
types.

[ For any mathematicians out there: it also looks monumentally stupid to
  do the 'modulo granularity' operation *twice*, never mind having a "+
  granularity" in the second modulus op.

  But that's the easiest way to avoid negative values or overflow, and
  it is how the original code was done. ]
Reported-by: Ingo Molnar <mingo@kernel.org>
Reported-by: Doug Anderson <dianders@chromium.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Shaohua Li <shli@fusionio.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

The last byte of the mac address is determined by a DIP switch, so
update the OF property with that address.
Signed-off-by: Chris Zankel <chris@zankel.net>

Remove heading and trailing spaces, trim trailing lines, and wrap lines
that are longer than 80 characters.
Signed-off-by: Chris Zankel <chris@zankel.net>

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

set_rasid_register accepts new RASID SR value, but ASID_USER_FIRST is
ASID value for the ring 1; RASID value is made by ASID_INSERT macro.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

XCHAL_CP_NUM is defined in variant/tie.h and it is not included by
head.S, leaving CPENABLE register uninitialised. XCHAL_HAVE_CP is
defined in variant/core.h to 1 when core has CPENABLE SR.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

There are XCHAL_NUM_TIMERS, reset them all.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

Add common XTFPGA parts as *.dtsi (base board, flash) and DTS for LX60
and for ML605.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

The Avnet LX60/LX110/LX200 board is an FPGA board that can be configured with
an Xtensa processor and an OpenCores Ethernet device.
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

Device trees allow specification of hardware topology and device
parameters at runtime instead of hard-coding them in platform setup
code. This allows running single binary kernel on a range of compatible
boards.

New boot parameters tag BP_TAG_FDT is allocated and a pointer to flat
device tree is passed in it.

Note that current interrupt mapping scheme uses single cell for
interrupt identification. That means that IRQ numbers used in DTS must
be CPU internal IRQ numbers, not external. It is possible to extend
interrupt identification to two cells, and use second cell to tell
external IRQ numbers form internal. That would allow to use single DTS
on multiple boards with different mapping of external IRQ numbers.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

IRQ domains provide a mechanism for conversion of linux IRQ numbers to
hardware IRQ numbers and vice versus. It is used by OpenFirmware for
linking device tree objects to their respective interrupt controllers.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

- remove duplicate rules for binary and packed image
- use predefined macros for ld/objcopy/gzip
- remove build-id section from bootable elf image
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

Define mb and wmb as memw to force memory barrier.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

Add a brief sanity test of S32C1I functionality.  This instruction
is needed by the kernel and userland as part of the base ABI
(including GCC atomic builtins, certain threading packages, future
atomic support in the C++ standard, etc).  However, correct operation
of this instruction requires some cooperation by hardware external to
the processor (such as bus bridge, bus fabric, or memory controller).
Minimally exercising this mechanism and reporting explicit status
early in the boot process is helpful to chip vendors using the Linux
kernel as a benchmark of correctness of hardware.

As it turns out, S32C1I is not exercised by the kernel and by uClibc
based userland as of early June 2008.  This is expected to change
soon as both incorporate more recent open source developments.
Signed-off-by: Marc Gauthier <marc@tensilica.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>