- 17 Jun, 2017 40 commits
-
-
Ville Syrjälä authored
commit 8f4d3809 upstream. The scanline counter is bonkers on VLV/CHV DSI. The scanline counter increment is not lined up with the start of vblank like it is on every other platform and output type. This causes problems for both the vblank timestamping and atomic update vblank evasion. On my FFRD8 machine at least, the scanline counter increment happens about 1/3 of a scanline ahead of the start of vblank (which is where all register latching happens still). That means we can't trust the scanline counter to tell us whether we're in vblank or not while we're on that particular line. In order to keep vblank timestamping in working condition when called from the vblank irq, we'll leave scanline_offset at one, which means that the entire line containing the start of vblank is considered to be inside the vblank. For the vblank evasion we'll need to consider that entire line to be bad, since we can't tell whether the registers already got latched or not. And we can't actually use the start of vblank interrupt to get us past that line as the interrupt would fire too soon, and then we'd up waiting for the next start of vblank instead. One way around that would using the frame start interrupt instead since that wouldn't fire until the next scanline, but that would require some bigger changes in the interrupt code. So for simplicity we'll just poll until we get past the bad line. v2: Adjust the comments a bit Cc: Jonas Aaberg <cja@gmx.net> Tested-by:
Jonas Aaberg <cja@gmx.net> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99086Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161215174734.28779-1-ville.syrjala@linux.intel.comTested-by:
Mika Kahola <mika.kahola@intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christian Borntraeger authored
commit c0e7bb38 upstream. For most cases a protection exception in the host (e.g. copy on write or dirty tracking) on the sie instruction will indicate an instruction length of 4. Turns out that there are some corner cases (e.g. runtime instrumentation) where this is not necessarily true and the ILC is unpredictable. Let's replace our 4 byte rewind_pad with 3 byte nops to prepare for all possible ILCs. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Max Filippov authored
commit e5c86679 upstream. Linux IRQ #0 is reserved for error reporting and may not be used. Increase NR_IRQS for one additional slot and increase irq_domain_add_legacy parameter first_irq value to 1, so that linux IRQ #0 is not associated with hardware IRQ #0 in legacy IRQ domains. Introduce macro XTENSA_PIC_LINUX_IRQ for static translation of xtensa PIC hardware IRQ # to linux IRQ #. Use this macro in XTFPGA platform data definitions. This fixes inability to use hardware IRQ #0 in configurations that don't use device tree and allows for non-identity mapping between linux IRQ # and hardware IRQ #. Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Ram Amrani authored
[ Upstream commit 59e8970b ] Return the maximum supported amount of inline data, not the qp's current configured inline data size, when filling out the results of a query qp call. Signed-off-by:
Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by:
Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
-
Ram Amrani authored
[ Upstream commit c78c3149 ] It is normal to flush CQEs if the QP is in error state. Hence there's no use in printing a message per CQE to dmesg. Signed-off-by:
-
Ram Amrani authored
[ Upstream commit 933e6dca ] Fail QP state transition from error to reset if SQ/RQ are not empty and still in the process of flushing out the queued work entries. Signed-off-by:
-
Ram Amrani authored
[ Upstream commit 9c1e0228 ] Free the PD if no internal resources were available. Move userspace code under the relevant 'if'. Signed-off-by:
Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by:
-
Ram Amrani authored
[ Upstream commit f449c7a2 ] Relying on qede to trigger qedr on startup is problematic. When probing both if qedr loads slowly then qede can assume qedr is missing and not trigger it. This patch adds a triggering from qedr and protects against a race via an atomic bit. Signed-off-by:
-
Liping Zhang authored
[ Upstream commit 5ce6b04c ] First, log prefix will be truncated to NF_LOG_PREFIXLEN-1, i.e. 127, at nf_log_packet(), so the extra part is useless. Second, after adding a log rule with a very very long prefix, we will fail to dump the nft rules after this _special_ one, but acctually, they do exist. For example: # name_65000=$(printf "%0.sQ" {1..65000}) # nft add rule filter output log prefix "$name_65000" # nft add rule filter output counter # nft add rule filter output counter # nft list chain filter output table ip filter { chain output { type filter hook output priority 0; policy accept; } } So now, restrict the log prefix length to NF_LOG_PREFIXLEN-1. Fixes: 96518518 ("netfilter: add nftables") Signed-off-by:
Liping Zhang <zlpnobody@gmail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Pablo Neira Ayuso authored
[ Upstream commit 35d0ac90 ] If the element exists and no NLM_F_EXCL is specified, do not bump set->nelems, otherwise we leak one set element slot. This problem amplifies if the set is full since the abort path always decrements the counter for the -ENFILE case too, giving one spare extra slot. Fix this by moving set->nelems update to nft_add_set_elem() after successful element insertion. Moreover, remove the element if the set is full so there is no need to rely on the abort path to undo things anymore. Fixes: c016c7e4 ("netfilter: nf_tables: honor NLM_F_EXCL flag in set element insertion") Signed-off-by:
-
Parthasarathy Bhuvaragan authored
[ Upstream commit 93f955aa ] We trigger a soft lockup as we grab nametbl_lock twice if the node has a pending node up/down or link up/down event while: - we process an incoming named message in tipc_named_rcv() and perform an tipc_update_nametbl(). - we have pending backlog items in the name distributor queue during a nametable update using tipc_nametbl_publish() or tipc_nametbl_withdraw(). The following are the call chain associated: tipc_named_rcv() Grabs nametbl_lock tipc_update_nametbl() (publish/withdraw) tipc_node_subscribe()/unsubscribe() tipc_node_write_unlock() << lockup occurs if an outstanding node/link event exits, as we grabs nametbl_lock again >> tipc_nametbl_withdraw() Grab nametbl_lock tipc_named_process_backlog() tipc_update_nametbl() << rest as above >> The function tipc_node_write_unlock(), in addition to releasing the lock processes the outstanding node/link up/down events. To do this, we need to grab the nametbl_lock again leading to the lockup. In this commit we fix the soft lockup by introducing a fast variant of node_unlock(), where we just release the lock. We adapt the node_subscribe()/node_unsubscribe() to use the fast variants. Reported-and-Tested-by:
John Thompson <thompa.atl@gmail.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Acked-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Parthasarathy Bhuvaragan authored
[ Upstream commit d094c4d5 ] Until now, the subscribers keep track of the subscriptions using reference count at subscriber level. At subscription cancel or subscriber delete, we delete the subscription only if the timer was pending for the subscription. This approach is incorrect as: 1. del_timer() is not SMP safe, if on CPU0 the check for pending timer returns true but CPU1 might schedule the timer callback thereby deleting the subscription. Thus when CPU0 is scheduled, it deletes an invalid subscription. 2. We export tipc_subscrp_report_overlap(), which accesses the subscription pointer multiple times. Meanwhile the subscription timer can expire thereby freeing the subscription and we might continue to access the subscription pointer leading to memory violations. In this commit, we introduce subscription refcount to avoid deleting an invalid subscription. Reported-and-Tested-by:
-
Parthasarathy Bhuvaragan authored
[ Upstream commit fc0adfc8 ] Until now, the generic server framework maintains the connection id's per subscriber in server's conn_idr. At tipc_close_conn, we remove the connection id from the server list, but the connection is valid until we call the refcount cleanup. Hence we have a window where the server allocates the same connection to an new subscriber leading to inconsistent reference count. We have another refcount warning we grab the refcount in tipc_conn_lookup() for connections with flag with CF_CONNECTED not set. This usually occurs at shutdown when the we stop the topology server and withdraw TIPC_CFG_SRV publication thereby triggering a withdraw message to subscribers. In this commit, we: 1. remove the connection from the server list at recount cleanup. 2. grab the refcount for a connection only if CF_CONNECTED is set. Tested-by:
-
Parthasarathy Bhuvaragan authored
[ Upstream commit 4c887aa6 ] In tipc_conn_sendmsg(), we first queue the request to the outqueue followed by the connection state check. If the connection is not connected, we should not queue this message. In this commit, we reject the messages if the connection state is not CF_CONNECTED. Acked-by:
-
Vineet Gupta authored
[ Upstream commit 78f824d4 ] This is needed on HS38 cores, for setting up IO-Coherency aperture properly The polling could perturb the caches and coherecy fabric which could be wrong in the small window when Master is setting up IOC aperture etc in arc_cache_init() We do it only for ARCv2 based builds to not affect EZChip ARCompact based platform. Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Vineet Gupta authored
[ Upstream commit bf02454a ] For run-on-reset SMP configs, non master cores call a routine which waits until Master gives it a "go" signal (currently using a shared mem flag). The same routine then jumps off the well known entry point of all non Master cores i.e. @first_lines_of_secondary This patch moves out the last part into one single place in early boot code. This is better in terms of absraction (the wait API only waits) and returns, leaving out the "jump off to" part. In actual implementation this requires some restructuring of the early boot code as well as Master now jumps to BSS setup explicitly, vs. falling thru into it before. Technically this patch doesn't cause any functional change, it just moves the ugly #ifdef'ry from assembly code to "C" Signed-off-by:
-
Stefan Hajnoczi authored
[ Upstream commit 0516ffd8 ] Propagate the error when vhost_vq_init_access() fails and set vq->private_data to NULL. Signed-off-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Don Zickus authored
[ Upstream commit b94f5118 ] On an overloaded system, it is possible that a change in the watchdog threshold can be delayed long enough to trigger a false positive. This can easily be achieved by having a cpu spinning indefinitely on a task, while another cpu updates watchdog threshold. What happens is while trying to park the watchdog threads, the hrtimers on the other cpus trigger and reprogram themselves with the new slower watchdog threshold. Meanwhile, the nmi watchdog is still programmed with the old faster threshold. Because the one cpu is blocked, it prevents the thread parking on the other cpus from completing, which is needed to shutdown the nmi watchdog and reprogram it correctly. As a result, a false positive from the nmi watchdog is reported. Fix this by setting a park_in_progress flag to block all lockups until the parking is complete. Fix provided by Ulrich Obergfell. [akpm@linux-foundation.org: s/park_in_progress/watchdog_park_in_progress/] Link: http://lkml.kernel.org/r/1481041033-192236-1-git-send-email-dzickus@redhat.comSigned-off-by:
Don Zickus <dzickus@redhat.com> Reviewed-by:
Aaron Tomlin <atomlin@redhat.com> Cc: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Babu Moger authored
[ Upstream commit 249e52e3 ] Patch series "Clean up watchdog handlers", v2. This is an attempt to cleanup watchdog handlers. Right now, kernel/watchdog.c implements both softlockup and hardlockup detectors. Softlockup code is generic. Hardlockup code is arch specific. Some architectures don't use hardlockup detectors. They use their own watchdog detectors. To make both these combination work, we have numerous #ifdefs in kernel/watchdog.c. We are trying here to make these handlers independent of each other. Also provide an interface for architectures to implement their own handlers. watchdog_nmi_enable and watchdog_nmi_disable will be defined as weak such that architectures can override its definitions. Thanks to Don Zickus for his suggestions. Here are our previous discussions http://www.spinics.net/lists/sparclinux/msg16543.html http://www.spinics.net/lists/sparclinux/msg16441.html This patch (of 3): Move shared macros and definitions to nmi.h so that watchdog.c, new file watchdog_hld.c or any other architecture specific handler can use those definitions. Link: http://lkml.kernel.org/r/1478034826-43888-2-git-send-email-babu.moger@oracle.comSigned-off-by:
Babu Moger <babu.moger@oracle.com> Acked-by:
-
Babu Moger authored
[ Upstream commit 73ce0511 ] Separate hardlockup code from watchdog.c and move it to watchdog_hld.c. It is mostly straight forward. Remove everything inside CONFIG_HARDLOCKUP_DETECTORS. This code will go to file watchdog_hld.c. Also update the makefile accordigly. Link: http://lkml.kernel.org/r/1478034826-43888-3-git-send-email-babu.moger@oracle.comSigned-off-by:
-
Andrea Arcangeli authored
[ Upstream commit 15a77c6f ] With >=32 CPUs the userfaultfd selftest triggered a graceful but unexpected SIGBUS because VM_FAULT_RETRY was returned by handle_userfault() despite the UFFDIO_COPY wasn't completed. This seems caused by rwsem waking the thread blocked in handle_userfault() and we can't run up_read() before the wait_event sequence is complete. Keeping the wait_even sequence identical to the first one, would require running userfaultfd_must_wait() again to know if the loop should be repeated, and it would also require retaking the rwsem and revalidating the whole vma status. It seems simpler to wait the targeted wakeup so that if false wakeups materialize we still wait for our specific wakeup event, unless of course there are signals or the uffd was released. Debug code collecting the stack trace of the wakeup showed this: $ ./userfaultfd 100 99999 nr_pages: 25600, nr_pages_per_cpu: 800 bounces: 99998, mode: racing ver poll, userfaults: 32 35 90 232 30 138 69 82 34 30 139 40 40 31 20 19 43 13 15 28 27 38 21 43 56 22 1 17 31 8 4 2 bounces: 99997, mode: rnd ver poll, Bus error (core dumped) save_stack_trace+0x2b/0x50 try_to_wake_up+0x2a6/0x580 wake_up_q+0x32/0x70 rwsem_wake+0xe0/0x120 call_rwsem_wake+0x1b/0x30 up_write+0x3b/0x40 vm_mmap_pgoff+0x9c/0xc0 SyS_mmap_pgoff+0x1a9/0x240 SyS_mmap+0x22/0x30 entry_SYSCALL_64_fastpath+0x1f/0xbd 0xffffffffffffffff FAULT_FLAG_ALLOW_RETRY missing 70 CPU: 24 PID: 1054 Comm: userfaultfd Tainted: G W 4.8.0+ #30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0xb8/0x112 handle_userfault+0x572/0x650 handle_mm_fault+0x12cb/0x1520 __do_page_fault+0x175/0x500 trace_do_page_fault+0x61/0x270 do_async_page_fault+0x19/0x90 async_page_fault+0x25/0x30 This always happens when the main userfault selftest thread is running clone() while glibc runs either mprotect or mmap (both taking mmap_sem down_write()) to allocate the thread stack of the background threads, while locking/userfault threads already run at full throttle and are susceptible to false wakeups that may cause handle_userfault() to return before than expected (which results in graceful SIGBUS at the next attempt). This was reproduced only with >=32 CPUs because the loop to start the thread where clone() is too quick with fewer CPUs, while with 32 CPUs there's already significant activity on ~32 locking and userfault threads when the last background threads are started with clone(). This >=32 CPUs SMP race condition is likely reproducible only with the selftest because of the much heavier userfault load it generates if compared to real apps. We'll have to allow "one more" VM_FAULT_RETRY for the WP support and a patch floating around that provides it also hidden this problem but in reality only is successfully at hiding the problem. False wakeups could still happen again the second time handle_userfault() is invoked, even if it's a so rare race condition that getting false wakeups twice in a row is impossible to reproduce. This full fix is needed for correctness, the only alternative would be to allow VM_FAULT_RETRY to be returned infinitely. With this fix the WP support can stick to a strict "one more" VM_FAULT_RETRY logic (no need of returning it infinite times to avoid the SIGBUS). Link: http://lkml.kernel.org/r/20170111005535.13832-2-aarcange@redhat.comSigned-off-by:
Andrea Arcangeli <aarcange@redhat.com> Reported-by:
Shubham Kumar Sharma <shubham.kumar.sharma@oracle.com> Tested-by:
Mike Kravetz <mike.kravetz@oracle.com> Acked-by:
Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Michael Rapoport <RAPOPORT@il.ibm.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Pavel Emelyanov <xemul@parallels.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 3ba4bcee ] We have seen proc_pid_readdir() invocations holding cpu for more than 50 ms. Add a cond_resched() to be gentle with other tasks. [akpm@linux-foundation.org: coding style fix] Link: http://lkml.kernel.org/r/1484238380.15816.42.camel@edumazet-glaptop3.roam.corp.google.comSigned-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Sudip Mukherjee authored
[ Upstream commit 4180c4c1 ] Some more atomic64 operations were missing and as a result frv allmodconfig was failing. Add the missing operations. Link: http://lkml.kernel.org/r/1485193844-12850-1-git-send-email-sudip.mukherjee@codethink.co.ukSigned-off-by:
Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Cc: David Howells <dhowells@redhat.com> Signed-off-by:
-
Sudip Mukherjee authored
[ Upstream commit 545d58f6 ] The build of frv allmodconfig was failing with the error: lib/atomic64_test.c:209:9: error: implicit declaration of function 'atomic64_add_unless' All the atomic64 operations were defined in frv, but atomic64_add_unless() was not done. Implement atomic64_add_unless() as done in other arches. Link: http://lkml.kernel.org/r/1484781236-6698-1-git-send-email-sudipm.mukherjee@gmail.comSigned-off-by:
-
Coly Li authored
[ Upstream commit f598f82e ] Commit 8a59f5d2 ("fs/romfs: return f_fsid for statfs(2)") generates a 64bit id from sb->s_bdev->bd_dev. This is only correct when romfs is defined with CONFIG_ROMFS_ON_BLOCK. If romfs is only defined with CONFIG_ROMFS_ON_MTD, sb->s_bdev is NULL, referencing sb->s_bdev->bd_dev will triger an oops. Richard Weinberger points out that when CONFIG_ROMFS_BACKED_BY_BOTH=y, both CONFIG_ROMFS_ON_BLOCK and CONFIG_ROMFS_ON_MTD are defined. Therefore when calling huge_encode_dev() to generate a 64bit id, I use the follow order to choose parameter, - CONFIG_ROMFS_ON_BLOCK defined use sb->s_bdev->bd_dev - CONFIG_ROMFS_ON_BLOCK undefined and CONFIG_ROMFS_ON_MTD defined use sb->s_dev when, - both CONFIG_ROMFS_ON_BLOCK and CONFIG_ROMFS_ON_MTD undefined leave id as 0 When CONFIG_ROMFS_ON_MTD is defined and sb->s_mtd is not NULL, sb->s_dev is set to a device ID generated by MTD_BLOCK_MAJOR and mtd index, otherwise sb->s_dev is 0. This is a try-best effort to generate a uniq file system ID, if all the above conditions are not meet, f_fsid of this romfs instance will be 0. Generally only one romfs can be built on single MTD block device, this method is enough to identify multiple romfs instances in a computer. Link: http://lkml.kernel.org/r/1482928596-115155-1-git-send-email-colyli@suse.deSigned-off-by:
Coly Li <colyli@suse.de> Reported-by:
Nong Li <nongli1031@gmail.com> Tested-by:
-
Randy Dunlap authored
[ Upstream commit 3705ccfd ] When CONFIG_FPU is not enabled on arch/mn10300, <asm/switch_to.h> causes a build error with a call to fpu_save(): kernel/built-in.o: In function `.L410': core.c:(.sched.text+0x28a): undefined reference to `fpu_save' Fix this by including <asm/fpu.h> in <asm/switch_to.h> so that an empty static inline fpu_save() is defined. Link: http://lkml.kernel.org/r/dc421c4f-4842-4429-1b99-92865c2f24b6@infradead.orgSigned-off-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
kbuild test robot <fengguang.wu@intel.com> Reviewed-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit 3ba7b779 ] While testing musb host mode cable plugging on a BeagleBone, I came across this error: Unhandled fault: external abort on non-linefetch (0x1008) at 0xd1dcfc60 ... [<bf668390>] (musb_default_readb [musb_hdrc]) from [<bf668578>] (musb_irq_work+0x1c/0x180 [musb_hdrc]) [<bf668578>] (musb_irq_work [musb_hdrc]) from [<c0156554>] (process_one_work+0x2b4/0x808) [<c0156554>] (process_one_work) from [<c015767c>] (worker_thread+0x3c/0x550) [<c015767c>] (worker_thread) from [<c015d568>] (kthread+0x104/0x148) [<c015d568>] (kthread) from [<c01078d0>] (ret_from_fork+0x14/0x24) Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit 6f29a130 ] sctp_addr_id2transport is a function for sockopt to look up assoc by address. As the address is from userspace, it can be a v4-mapped v6 address. But in sctp protocol stack, it always handles a v4-mapped v6 address as a v4 address. So it's necessary to convert it to a v4 address before looking up assoc by address. This patch is to fix it by calling sctp_verify_addr in which it can do this conversion before calling sctp_endpoint_lookup_assoc, just like what sctp_sendmsg and __sctp_connect do for the address from users. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit 5207f399 ] Now sctp gso puts segments into skb's frag_list, then processes these segments in skb_segment. But skb_segment handles them only when gs is enabled, as it's in the same branch with skb's frags. Although almost all the NICs support sg other than some old ones, but since commit 1e16aa3d ("net: gso: use feature flag argument in all protocol gso handlers"), features &= skb->dev->hw_enc_features, and xfrm_output_gso call skb_segment with features = 0, which means sctp gso would call skb_segment with sg = 0, and skb_segment would not work as expected. This patch is to fix it by setting features param with NETIF_F_SG when calling skb_segment so that it can go the right branch to process the skb's frag_list. Signed-off-by:
-
Michael Chan authored
[ Upstream commit 90c694bb ] bnxt_get_port_module_status() calls bnxt_update_link() which expects RTNL to be held. In bnxt_sp_task() that does not hold RTNL, we need to call it with a prior call to bnxt_rtnl_lock_sp() and the call needs to be moved to the end of bnxt_sp_task(). Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Michael Chan authored
[ Upstream commit 0eaa24b9 ] bnxt_update_link() is called from multiple code paths. Most callers, such as open, ethtool, already hold RTNL. Only the caller bnxt_sp_task() does not. So it is a bug to take RTNL inside bnxt_update_link(). Fix it by removing the RTNL inside bnxt_update_link(). The function now expects the caller to always hold RTNL. In bnxt_sp_task(), call bnxt_rtnl_lock_sp() before calling bnxt_update_link(). We also need to move the call to the end of bnxt_sp_task() since it will be clearing the BNXT_STATE_IN_SP_TASK bit. Signed-off-by:
-
Michael Chan authored
[ Upstream commit 286ef9d6 ] On some dual port NICs, the speed setting on one port can affect the available speed on the other port. Add logic to detect these changes and adjust the advertised speed settings when necessary. Signed-off-by:
-
Michael Chan authored
[ Upstream commit a551ee94 ] In bnxt_sp_task(), we set a bit BNXT_STATE_IN_SP_TASK so that bnxt_close() will synchronize and wait for bnxt_sp_task() to finish. Some functions in bnxt_sp_task() require us to clear BNXT_STATE_IN_SP_TASK and then acquire rtnl_lock() to prevent race conditions. There are some bugs related to this logic. This patch refactors the code to have common bnxt_rtnl_lock_sp() and bnxt_rtnl_unlock_sp() to handle the RTNL and the clearing/setting of the bit. Multiple functions will need the same logic. We also need to move bnxt_reset() to the end of bnxt_sp_task(). Functions that clear BNXT_STATE_IN_SP_TASK must be the last functions to be called in bnxt_sp_task(). The common scheme will handle the condition properly. Signed-off-by:
-
John Crispin authored
[ Upstream commit 8b901f6b ] When the binding was defined, I was not aware that mt2701 was an earlier version of the SoC. For sake of consistency, the ethernet driver should use mt2701 inside the compat string as this is the earliest SoC with the ethernet core. The ethernet driver is currently of no real use until we finish and upstream the DSA driver. There are no users of this binding yet. It should be safe to fix this now before it is too late and we need to provide backward compatibility for the mt7623-eth compat string. Reported-by:
Sean Wang <sean.wang@mediatek.com> Signed-off-by:
John Crispin <john@phrozen.org> Signed-off-by:
-
hayeswang authored
[ Upstream commit de9bf29d ] Stop the tx when the napi is disabled to prevent napi_schedule() is called. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
hayeswang authored
[ Upstream commit 2c561b2b ] The rtl8152_post_reset() should sumbit rx urb and interrupt transfer, otherwise the rx wouldn't work and the linking change couldn't be detected. Signed-off-by:
-
hayeswang authored
[ Upstream commit 248b213a ] Re-schedule napi after napi_complete() for tx, if it is necessay. In r8152_poll(), if the tx is completed after tx_bottom() and before napi_complete(), the scheduling of napi would be lost. Then, no one handles the next tx until the next napi_schedule() is called. Signed-off-by:
-
hayeswang authored
[ Upstream commit 7489bdad ] Schedule the napi after napi_enable() for rx, if it is necessary. If the rx is completed when napi is disabled, the sheduling of napi would be lost. Then, no one handles the rx packet until next napi is scheduled. Signed-off-by:
-
hayeswang authored
[ Upstream commit 26afec39 ] Adjust the setting of the flag of SELECTIVE_SUSPEND to prevent start_xmit() from calling napi_schedule() directly during runtime suspend. After calling napi_disable() or clearing the flag of WORK_ENABLE, scheduling the napi is useless. Signed-off-by:
-
Parav Pandit authored
[ Upstream commit 748ff840 ] This patch performs dma sync operations on nvme_command and nvme_completion. nvme_command is synced (a) on receiving of the recv queue completion for cpu access. (b) before posting recv wqe back to rdma adapter for device access. nvme_completion is synced (a) on receiving of the recv queue completion of associated nvme_command for cpu access. (b) before posting send wqe to rdma adapter for device access. This patch is generated for git://git.infradead.org/nvme-fabrics.git Branch: nvmf-4.10 Signed-off-by:
Parav Pandit <parav@mellanox.com> Reviewed-by:
Max Gurtovoy <maxg@mellanox.com> Signed-off-by:
-
