- 24 May, 2015 32 commits
-
-
Don Zickus authored
This patch is an attempt to help hide the channel info behind accessory functions. I was trying to keep visorchannel as private as possible. The only function missing that seemed to be needed for now was the ability to set the clientpartition. So I expose that here. Signed-off-by:
Don Zickus <dzickus@redhat.com> Signed-off-by:
Benjamin Romer <benjamin.romer@unisys.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Don Zickus authored
If we are going to remove the bus_info structs than we need a way to find the devices when the *_create/destroy cmds are sent over the vmchannel. This function crudely impements what pci has. It takes a bus_no and dev_no and finds the matching 'struct visor_device'. This function can/should be optimzed later once we get our heads wrapped around its needs. For now, I am using dev_no=0 to mean the visorbus itself. The function is limited to chipset.c only because it is only needed to do the lookups upon receiving a vmchannel command. Future patches will make sure the resulting 'struct visor_device' is used every where else. Also allow visorbus_type to be more visible for use. Signed-off-by:
-
Don Zickus authored
The visorbus driver has three _info structs lying around (device, bus, channel) that store subsets of info from the bigger structs. Having these structs around make resource handling very difficult and more complicated than it needs to be. Use the device infrastructure and instead pass 'struct visor_device' all over the place. In order to do that 'struct visor_device' needs to get smarter. This patch adds the pieces to prep for it. The new elements will be used in later patches. Signed-off-by:
-
Don Zickus authored
Properly hook into the struct device groups element. This allows the core infrastructure to manage the files instead of the bus layer. And makes the code easier to read. I didn't clean up the _show functions just modified them a bit to handle the different args for now and to prevent a build warning. Signed-off-by:
-
Don Zickus authored
Remove stale code. Signed-off-by:
-
Don Zickus authored
Simplify things by moving the version file handling into the core. Signed-off-by:
-
Don Zickus authored
Mimicing what other drivers do, this seems appropriate. Yeah, it is a bus, but it is a bus _device_. This makes things work better and smoother. Now the sysfs looks like [root@dhcp-17-174 visorbus]# ls -l /sys/bus/visorbus/devices/ total 0 lrwxrwxrwx. 1 root root 0 Apr 17 16:09 vbus1:dev2 -> ../../../devices/visorbus1/vbus1:dev2 lrwxrwxrwx. 1 root root 0 Apr 17 16:09 visorbus1 -> ../../../devices/visorbus1 Which looks correct. All the attributes are still correct too, based on my very minimal testing of 'ls -lR'. :-) Signed-off-by:
-
Don Zickus authored
This patch moves the attributes to underneath the bus device correctly. This will help remove a bunch of cruft from the code and let the kernel infrastructure manage the sysfs files instead of the driver. After the move remove all the leftover code. Signed-off-by:
-
Don Zickus authored
Handling the sysfs attributes become easier to deal with when you can just run container_of(dev) to get devdata. Signed-off-by:
-
Don Zickus authored
Now that the header file movement is complete, remove the temporary ccflags include Signed-off-by:
-
David Kershner authored
remove uisqueue.h, uisthread.h, and uisutils.h replace HOSTADDRESS with u64 remove "uisutils.h" from header list in visorchipset.c Signed-off-by:
David Kershner <david.kershner@unisys.com> Signed-off-by:
-
David Kershner authored
Signed-off-by:
-
David Kershner authored
Makefiles still had common-spar listed in ccflags. This gets rid of them. Signed-off-by:
-
David Kershner authored
Move last three files out of common-spar iochannel.h --> include (will be used by visorhba and visornic) version.h --> moved to include controlvmcompletionstatus.h --> moved to visorbus, part of controlvmchannel.h Signed-off-by:
-
David Kershner authored
Diagchannel needs to go to standard include. Signed-off-by:
-
David Kershner authored
Move vbuschannel.h into visorbus. Signed-off-by:
-
David Kershner authored
Channel.h is used by all channels, it needs to be in include. Controlvm Channel is only used by visorbus, it needs to just be there. Signed-off-by:
-
David Kershner authored
Controlframework was only needed by controlvmchannel, move the structures into that header file. Signed-off-by:
-
David Kershner authored
Move hypervisor calls into visorbus and move vbusdeviceinfo.h into visorbus. Drivers will call into that to update clientInfo field. Signed-off-by:
-
Don Zickus authored
To prep for the moving of include files, temporarily add the visorbus/ as a ccflags -I. Once the header files are all transitioned, we can remove this. Signed-off-by:
-
Jes Sorensen authored
This preps for the possible build breakage in the next few patches. Signed-off-by:
Jes Sorensen <Jes.Sorensen@redhat.com> [updated changelog to reflect new patch order; instead of 'fixes' the patch 'prevents' - dcz] Signed-off-by:
-
David Kershner authored
Get rid of common-spar/include/diagnostics/appos_subsystems.h. No one is using it. Signed-off-by:
-
Jes Sorensen authored
Signed-off-by:
-
Jes Sorensen authored
Signed-off-by:
-
Jes Sorensen authored
Signed-off-by:
-
Jes Sorensen authored
Signed-off-by:
-
Shailendra Verma authored
Fix to avoid possible memory leak if the ion device registration get failed.Free the allocated device creation memory before return in case the ion device registration get failed. Signed-off-by:
Shailendra Verma <shailendra.capricorn@gmail.com> Signed-off-by:
-
Jagan Teki authored
This patch adds more help description on android Kconfig for - lowmemory killer - Timed gpio (same for timed output) Signed-off-by:
Jagan Teki <jteki@openedev.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Brian Swetland <swetland@google.com> Signed-off-by:
-
Amaury Denoyelle authored
This patch reformat multi-line comments which are not properly written according to the kernel coding style in cb_pcidas64.c Signed-off-by:
Amaury Denoyelle <amaury.denoyelle@gmail.com> Reviewed-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Amaury Denoyelle authored
This patch fixes coding style errors reported by checkpatch.pl for cb_pcidas64.c, about too long source code lines. Signed-off-by:
-
Colin Cronin authored
Fixed a spelling error in a comment. Signed-off-by:
Colin Cronin <colinpatrickcronin@gmail.com> Signed-off-by:
-
Greg Kroah-Hartman authored
Merge tag 'iio-for-v4.2b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of new driver, functionality and cleanups for IIO in the 4.2 cycle. Core functionality * i and q modifiers from quadrature channels. * IIO_CHAN_INFO_OVERSAMPLING_RATIO added. * High pass filter attributes added to mirror the existing low pass filter ones. Core cleanups * Make IIO tools building more cross compiler friendly. * Substantial rework of the function __iio_update_buffers to greatly simplify a hideously evolved function. New drivers and support * ACPI0008 ambient light sensor driver. This one has been around a long time to will be good to finally get it into mainline. * Berlin SOC ADC support. * BMC150 magnetometer. The accelerometer in the same package has been supported for quite some time, so good to have this half as well. * m62332 DAC driver * MEMSIC MMC35420 magnetometer. * ROHM BH1710 and similar ambient light sensors. * Sensortek STK3310 light sensor. * Sensortek STK8312 accelerometer. * Sensortek STK8BA50 accelerometer. * ti-adc128s052 gains support form the adc122s021 2 channel ADC. Driver cleanups and functionality. * Allow various drivers to compile with !GPIOLIB if COMPILE_TEST enabled. * bmc150 - decouple trigger from buffer to allow other triggers to be used. * bmg160 - decouple trigger from buffer to allow other triggers to be used. Fix a trivial unused field. * Constify a load of platform_device_id structures. * inv_mpu6050 - device tree bindings. * hid-sensors - fix a memory leak during probe if certain errors occur. * ltr501 - illuminance channel derived (in an non obvious fashion) from the intensity channels. * ltr501 - fix a boundary check on the proximity threshold. * mlx90614 - drop a pointless return. * mma8452 - Debugfs register access and fix a bug that had no effect (by coincidence) * ti_am335x_adc - add device tree bindings for sample-delay, open-delay and averaging. The ideal settings for these tend to be board design specific.
-
- 23 May, 2015 8 commits
-
-
Tiberiu Breana authored
Minimal implementation of an IIO driver for the Sensortek STK8BA50 3-axis accelerometer. Datasheet: http://szgsensor.com/uploads/soft/141229/STK8BA50%D2%E5%BC%CE.pdf Includes: - ACPI support; - read_raw for x,y,z axes; - reading and setting the scale (range) parameter. - power management Signed-off-by:
Tiberiu Breana <tiberiu.a.breana@intel.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Lars-Peter Clausen authored
Currently when something goes wrong at some step when disabling the buffers we immediately abort. This has the effect that the enable/disable calls are no longer balanced. So make sure that even if one step in the disable sequence fails the other steps are still executed. The other issue is that when either enable or disable fails buffers that were active at that time stay active while the device itself is disabled. This leaves things in a inconsistent state and can cause unbalanced enable/disable calls. Furthermore when enable fails we restore the old scan mask, but still keeps things disabled. Given that verification of the configuration was performed earlier and it is valid at the point where we try to enable/disable the most likely reason of failure is a communication failure with the device or maybe a out-of-memory situation. There is not really a good recovery strategy in such a case, so it makes sense to leave the device disabled, but we should still leave it in a consistent state. What the patch does if disable/enable fails is to deactivate all buffers and make sure that the device will be in the same state as if all buffers had been manually disabled. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Lars-Peter Clausen authored
__iio_update_buffers is already a rather large function with many different error paths and it is going to get even larger. This patch factors out the device enable and device disable paths into separate helper functions. The patch also re-implements iio_disable_all_buffers() using the new iio_disable_buffers() function removing a fair bit of redundant code. Signed-off-by:
-
Lars-Peter Clausen authored
Currently __iio_update_buffers() verifies whether the new configuration will work in the middle of the update sequence. This means if the new configuration is invalid we need to rollback the changes already made. This patch moves the validation of the new configuration at the beginning of __iio_update_buffers() and will not start to make any changes if the new configuration is invalid. Signed-off-by:
-
Urs Fässler authored
Signed-off-by:
Urs Fässler <urs.fassler@bytesatwork.ch> Signed-off-by:
-
Lars-Peter Clausen authored
I/Q modifiers can be used to denote signals which are represented by a in-phase and a quadrature component. The ABI documentation describes the I and Q modifiers for current and voltage channels for now as those will be the most likely users. Signed-off-by:
-
Antoine Tenart authored
Following the addition of a Berlin ADC driver, this patch adds the corresponding bindings documentation. Signed-off-by:
Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by:
-
Antoine Tenart authored
This patch adds the support of the Berlin ADC, available on Berlin SoCs. This ADC has 8 channels available, with one connected to a temperature sensor. The particularity here, is that the temperature sensor connected to the ADC has its own registers, and both the ADC and the temperature sensor must be configured when using it. Signed-off-by:
-
