- 14 Nov, 2014 18 commits
-
-
Antti Palosaari authored
It is not ready enough to be released on mainline. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Antti Palosaari authored
Convert driver to I2C RegMap API. That offers unified register access routines, register value caching and more. We need 3 register maps, one for each register page, as chips has 3 I2C address. Signed-off-by:
-
Antti Palosaari authored
Driver was using DVB proprietary binding model. As it is I2C device, we could change it to normal kernel I2C driver. Signed-off-by:
-
Antti Palosaari authored
Separate IF and BW based registers. Add support for DVB-T and DVB-T2 6MHz channel bandwidth. Signed-off-by:
-
Antti Palosaari authored
Implement DVB-T mode. Signed-off-by:
-
Antti Palosaari authored
Add support for DVB-T2. Signed-off-by:
-
Antti Palosaari authored
Only DVB-C is implemented. Signed-off-by:
-
Antti Palosaari authored
Add mn88472 driver from staging. DVB-T/T2/C demodulator driver. Signed-off-by:
-
Antti Palosaari authored
Add TODO for mainlining. Signed-off-by:
-
Antti Palosaari authored
It is not ready enough to be released on mainline. Signed-off-by:
-
Antti Palosaari authored
Implement initial support for DVB-T and DVB-T2 modes. Now driver has basic support for all the modes, DVB-C/T/T2. Signed-off-by:
-
Antti Palosaari authored
Convert driver to I2C RegMap API. Signed-off-by:
-
Antti Palosaari authored
It uses I2C bus so better to implement it as a standard I2C driver model. It was using proprietary DVB binding. Signed-off-by:
-
Antti Palosaari authored
Rename state to dev. Signed-off-by:
-
Antti Palosaari authored
Original plan was to implement driver as one file per used demod standard (mn88472_c.c, mn88472_t.c and mn88472_t2.c). However, that plan was a mistake as driver code differences are so small between different standards. Due to that rename this file and implement all the needed functionality to that file. Signed-off-by:
-
Antti Palosaari authored
400ms delay seems to be enough in order to gain DVB-C lock. Signed-off-by:
-
Antti Palosaari authored
Wrong symbol name causes demod attach failure. Reported-by:
Benjamin Larsson <benjamin@southpole.se> Signed-off-by:
-
Antti Palosaari authored
Only DVB-C mode is supported, DVB-T and DVB-T2 are not supported. Very much feature reduced version, no signal statistics nor normal chip configuration options. Signed-off-by:
-
- 11 Nov, 2014 20 commits
-
-
nibble.max authored
It is wrong that sp2 device uses the i2c adapter from m88ds3103 return. sp2 device sits on the same i2c bus with m88ds3103, not behind m88ds3103. Signed-off-by:
Nibble Max <nibble.max@gmail.com> Reviewed-by:
-
nibble.max authored
1> When m88ds3103 works in serial ts mode, its serial ts clock is equal to ts master clock and the clock divider is bypassed. 2> The serial ts clock is configed by the bridge driver just like parallel ts clock. Signed-off-by:
-
nibble.max authored
DVBSky S952 dvb-s/s2 dual PCIe card: 1>dvb frontend: M88TS2022(tuner),M88DS3103(demod) 2>PCIe bridge: CX23885(port b: parallel mode, port c: serial mode) 3>rc: cx23885 integrated. Signed-off-by:
Olli Salonen <olli.salonen@iki.fi> Signed-off-by:
-
nibble.max authored
DVBSky S950 dvb-s/s2 PCIe card: 1>dvb frontend: M88TS2022(tuner),M88DS3103(demod) 2>PCIe bridge: cx23885 3>rc: cx23885 integrated. Signed-off-by:
-
Hans Verkuil authored
Fix many sparse warnings: drivers/media/pci/saa7164/saa7164-core.c:97:18: warning: cast removes address space of expression drivers/media/pci/saa7164/saa7164-core.c:122:31: warning: cast removes address space of expression drivers/media/pci/saa7164/saa7164-core.c:122:31: warning: incorrect type in initializer (different address spaces) drivers/media/pci/saa7164/saa7164-core.c:122:31: expected unsigned char [noderef] [usertype] <asn:2>*bufcpu drivers/media/pci/saa7164/saa7164-core.c:122:31: got unsigned char [usertype] *<noident> drivers/media/pci/saa7164/saa7164-core.c:282:44: warning: cast removes address space of expression drivers/media/pci/saa7164/saa7164-core.c:286:38: warning: cast removes address space of expression drivers/media/pci/saa7164/saa7164-core.c:286:35: warning: incorrect type in assignment (different address spaces) drivers/media/pci/saa7164/saa7164-core.c:286:35: expected unsigned char [noderef] [usertype] <asn:2>*p drivers/media/pci/saa7164/saa7164-core.c:286:35: got unsigned char [usertype] *<noident> drivers/media/pci/saa7164/saa7164-core.c:352:44: warning: cast removes address space of expression drivers/media/pci/saa7164/saa7164-core.c:527:53: warning: cast removes address space of expression drivers/media/pci/saa7164/saa7164-core.c:129:30: warning: dereference of noderef expression drivers/media/pci/saa7164/saa7164-core.c:133:38: warning: dereference of noderef expression drivers/media/pci/saa7164/saa7164-core.c:133:72: warning: dereference of noderef expression drivers/media/pci/saa7164/saa7164-core.c:134:35: warning: dereference of noderef expression drivers/media/pci/saa7164/saa7164-core.c:287:61: warning: dereference of noderef expression drivers/media/pci/saa7164/saa7164-core.c:288:65: warning: dereference of noderef expression drivers/media/pci/saa7164/saa7164-core.c:289:65: warning: dereference of noderef expression drivers/media/pci/saa7164/saa7164-core.c:290:65: warning: dereference of noderef expression drivers/media/pci/saa7164/saa7164-core.c:291:65: warning: dereference of noderef expression drivers/media/pci/saa7164/saa7164-core.c:292:65: warning: dereference of noderef expression drivers/media/pci/saa7164/saa7164-core.c:293:65: warning: dereference of noderef expression drivers/media/pci/saa7164/saa7164-core.c:294:65: warning: dereference of noderef expression drivers/media/pci/saa7164/saa7164-fw.c:548:52: warning: incorrect type in argument 5 (different address spaces) drivers/media/pci/saa7164/saa7164-fw.c:548:52: expected unsigned char [usertype] *dst drivers/media/pci/saa7164/saa7164-fw.c:548:52: got unsigned char [noderef] [usertype] <asn:2>* drivers/media/pci/saa7164/saa7164-fw.c:579:44: warning: incorrect type in argument 5 (different address spaces) drivers/media/pci/saa7164/saa7164-fw.c:579:44: expected unsigned char [usertype] *dst drivers/media/pci/saa7164/saa7164-fw.c:579:44: got unsigned char [noderef] [usertype] <asn:2>* drivers/media/pci/saa7164/saa7164-fw.c:597:44: warning: incorrect type in argument 5 (different address spaces) drivers/media/pci/saa7164/saa7164-fw.c:597:44: expected unsigned char [usertype] *dst drivers/media/pci/saa7164/saa7164-fw.c:597:44: got unsigned char [noderef] [usertype] <asn:2>* drivers/media/pci/saa7164/saa7164-bus.c:36:36: warning: cast removes address space of expression drivers/media/pci/saa7164/saa7164-bus.c:41:36: warning: cast removes address space of expression drivers/media/pci/saa7164/saa7164-bus.c:151:19: warning: incorrect type in assignment (different base types) drivers/media/pci/saa7164/saa7164-bus.c:151:19: expected unsigned short [unsigned] [usertype] size drivers/media/pci/saa7164/saa7164-bus.c:151:19: got restricted __le16 [usertype] <noident> drivers/media/pci/saa7164/saa7164-bus.c:152:22: warning: incorrect type in assignment (different base types) drivers/media/pci/saa7164/saa7164-bus.c:152:22: expected unsigned int [unsigned] [usertype] command drivers/media/pci/saa7164/saa7164-bus.c:152:22: got restricted __le32 [usertype] <noident> drivers/media/pci/saa7164/saa7164-bus.c:153:30: warning: incorrect type in assignment (different base types) drivers/media/pci/saa7164/saa7164-bus.c:153:30: expected unsigned short [unsigned] [usertype] controlselector drivers/media/pci/saa7164/saa7164-bus.c:153:30: got restricted __le16 [usertype] <noident> drivers/media/pci/saa7164/saa7164-bus.c:172:20: warning: cast to restricted __le32 drivers/media/pci/saa7164/saa7164-bus.c:173:20: warning: cast to restricted __le32 drivers/media/pci/saa7164/saa7164-bus.c:206:28: warning: cast to restricted __le32 drivers/media/pci/saa7164/saa7164-bus.c:287:9: warning: incorrect type in argument 1 (different base types) drivers/media/pci/saa7164/saa7164-bus.c:287:9: expected unsigned int [unsigned] val drivers/media/pci/saa7164/saa7164-bus.c:287:9: got restricted __le32 [usertype] <noident> drivers/media/pci/saa7164/saa7164-bus.c:339:20: warning: cast to restricted __le32 drivers/media/pci/saa7164/saa7164-bus.c:340:20: warning: cast to restricted __le32 drivers/media/pci/saa7164/saa7164-bus.c:463:9: warning: incorrect type in argument 1 (different base types) drivers/media/pci/saa7164/saa7164-bus.c:463:9: expected unsigned int [unsigned] val drivers/media/pci/saa7164/saa7164-bus.c:463:9: got restricted __le32 [usertype] <noident> drivers/media/pci/saa7164/saa7164-bus.c:466:21: warning: cast to restricted __le16 drivers/media/pci/saa7164/saa7164-bus.c:467:24: warning: cast to restricted __le32 drivers/media/pci/saa7164/saa7164-bus.c:468:32: warning: cast to restricted __le16 drivers/media/pci/saa7164/saa7164-buffer.c:122:18: warning: incorrect type in assignment (different address spaces) drivers/media/pci/saa7164/saa7164-buffer.c:122:18: expected unsigned long long [noderef] [usertype] <asn:2>*cpu drivers/media/pci/saa7164/saa7164-buffer.c:122:18: got void * drivers/media/pci/saa7164/saa7164-buffer.c:127:21: warning: incorrect type in assignment (different address spaces) drivers/media/pci/saa7164/saa7164-buffer.c:127:21: expected unsigned long long [noderef] [usertype] <asn:2>*pt_cpu drivers/media/pci/saa7164/saa7164-buffer.c:127:21: got void * drivers/media/pci/saa7164/saa7164-buffer.c:134:20: warning: cast removes address space of expression drivers/media/pci/saa7164/saa7164-buffer.c:156:63: warning: incorrect type in argument 3 (different address spaces) drivers/media/pci/saa7164/saa7164-buffer.c:156:63: expected void *vaddr drivers/media/pci/saa7164/saa7164-buffer.c:156:63: got unsigned long long [noderef] [usertype] <asn:2>*cpu drivers/media/pci/saa7164/saa7164-buffer.c:179:57: warning: incorrect type in argument 3 (different address spaces) drivers/media/pci/saa7164/saa7164-buffer.c:179:57: expected void *vaddr drivers/media/pci/saa7164/saa7164-buffer.c:179:57: got unsigned long long [noderef] [usertype] <asn:2>*cpu drivers/media/pci/saa7164/saa7164-buffer.c:180:56: warning: incorrect type in argument 3 (different address spaces) drivers/media/pci/saa7164/saa7164-buffer.c:180:56: expected void *vaddr drivers/media/pci/saa7164/saa7164-buffer.c:180:56: got unsigned long long [noderef] [usertype] <asn:2>*pt_cpu drivers/media/pci/saa7164/saa7164-buffer.c:84:17: warning: dereference of noderef expression drivers/media/pci/saa7164/saa7164-buffer.c:147:31: warning: dereference of noderef expression drivers/media/pci/saa7164/saa7164-buffer.c:148:17: warning: dereference of noderef expression Most are caused by pointers marked as __iomem when they aren't or not marked as __iomem when they should. Also note that readl/writel already do endian conversion, so there is no need to do it again. saa7164_bus_set/get were a bit tricky: you have to make sure the msg endian conversion is done at the right time, and that the code isn't using fields that are still little endian instead of cpu-endianness. The approach chosen is to convert just before writing to the ring buffer and to convert it back right after reading from the ring buffer. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Cc: Steven Toth <stoth@kernellabs.com> Signed-off-by:
-
Hans Verkuil authored
In order to have v4l2-compliance tool pass the G/S_EDID some modifications where needed in the driver. In particular, the edid.reserved zone must be blanked. Based on a patch from Jean-Michel Hautbois <jean-michel.hautbois@vodalys.com>, but reworked it a bit. It should use 'data' (which depends on edid.present) instead of edid.blocks as the check whether edid data is present. Signed-off-by:
-
Hans Verkuil authored
This fixes the v4l2-compliance failures. Signed-off-by:
-
Hans Verkuil authored
Make this pass the v4l2-compliance test. Signed-off-by:
-
Sudip Mukherjee authored
we are getting struct clk using clk_get before calling clk_prepare_enable. but if clk_prepare_enable fails, then we are jumping to fail_mutex_unlock where we are just unlocking the mutex, but we are not freeing the clock source. this patch just adds a call to clk_put before jumping to fail_mutex_unlock. Signed-off-by:
Sudip Mukherjee <sudip@vectorindia.org> Acked-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Hans Verkuil authored
Add array controls to test support for such controls. There is one array with just one element, one 8x16 matrix control and one 4 dimensional 2x3x4x5 control. This makes it possible to experiment with such controls without requiring hard-to-get hardware. Signed-off-by:
-
sensoray-dev authored
qlock spinlock controls access to buf_list and sequence. qlock spinlock should not be locked during a copy to video buffers, an operation that may sleep. Signed-off-by:
Dean Anderson <linux-dev@sensoray.com> Signed-off-by:
-
Andrey Utkin authored
It makes no sense to block the SOLO_IRQ_ENCODER interrupt from being sent while processing an earlier interrupt. New interrupts will just kick the thread again once it is done processing. Signed-off-by:
Andrey Utkin <andrey.krieger.utkin@gmail.com> [hans.verkuil@cisco.com: fix commit description] Signed-off-by:
-
Andrey Utkin authored
Before, it was called from individual encoder (de)init procedures, which lead to spare threads running (which were actually lost, leaked). The current fix uses trivial approach, and the downside is that the processing thread is working always, even when there's no consumer. Signed-off-by:
-
Andrey Utkin authored
Fixes this warning: [ 956.730136] ------------[ cut here ]------------ [ 956.730143] WARNING: CPU: 1 PID: 10134 at lib/dma-debug.c:963 dma_debug_device_change+0x191/0x1f0() [ 956.730146] pci 0000:07:05.0: DMA-API: device driver has pending DMA allocations while released from device [count=8] One of leaked entries details: [device address=0x00000000d3d57000] [size=512 bytes] [mapped with DMA_BIDIRECTIONAL] [mapped as coherent] [ 956.730147] Modules linked in: solo6x10(-) videobuf2_dma_contig videobuf2_dma_sg videobuf2_memops videobuf2_core ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat videobuf_vmalloc videobuf_core v4l2_common videodev rt2800usb rt2800lib rt2x00usb rt2x00lib mac80211 cfg80211 crc_ccitt usbkbd hid_a4tech hid_generic usbhid snd_hda_codec_hdmi snd_hda_codec_via snd_hda_codec_generic snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_pcm x86_pkg_temp_thermal snd_timer snd soundcore [ 956.730172] CPU: 1 PID: 10134 Comm: rmmod Not tainted 3.18.0-rc1-next-20141023-zver-dirty #24 [ 956.730173] Hardware name: System manufacturer System Product Name/P8H77-V, BIOS 0501 02/28/2012 [ 956.730175] 0000000000000009 ffff8801df9e3c58 ffffffff817ffe6b 0000000000000001 [ 956.730177] ffff8801df9e3ca8 ffff8801df9e3c98 ffffffff81091ec7 0000000000000046 [ 956.730180] ffff880215457e90 0000000000000008 ffffffff81cbb10f ffff880215570098 [ 956.730183] Call Trace: [ 956.730188] [<ffffffff817ffe6b>] dump_stack+0x4f/0x7c [ 956.730192] [<ffffffff81091ec7>] warn_slowpath_common+0x87/0xb0 [ 956.730194] [<ffffffff81091f91>] warn_slowpath_fmt+0x41/0x50 [ 956.730197] [<ffffffff81412558>] ? dma_debug_device_change+0xb8/0x1f0 [ 956.730199] [<ffffffff81412631>] dma_debug_device_change+0x191/0x1f0 [ 956.730203] [<ffffffff810b14ad>] notifier_call_chain+0x4d/0x70 [ 956.730205] [<ffffffff810b15f9>] __blocking_notifier_call_chain+0x59/0x80 [ 956.730207] [<ffffffff810b1631>] blocking_notifier_call_chain+0x11/0x20 [ 956.730211] [<ffffffff815873af>] __device_release_driver+0xcf/0xf0 [ 956.730213] [<ffffffff81587ee8>] driver_detach+0xc8/0xd0 [ 956.730215] [<ffffffff81587147>] bus_remove_driver+0x57/0xd0 [ 956.730218] [<ffffffff815887e9>] driver_unregister+0x29/0x60 [ 956.730221] [<ffffffff81420131>] pci_unregister_driver+0x21/0x90 [ 956.730225] [<ffffffffa03219d7>] solo_pci_driver_exit+0x10/0x12 [solo6x10] [ 956.730228] [<ffffffff81112ee0>] SyS_delete_module+0x170/0x1f0 [ 956.730232] [<ffffffff813eb76e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 956.730234] [<ffffffff8180abd2>] system_call_fastpath+0x12/0x17 [ 956.730235] ---[ end trace e730af02713a6c53 ]--- [ 956.730237] Mapped at: [ 956.730238] [<ffffffff8141186c>] debug_dma_alloc_coherent+0x3c/0xb0 [ 956.730240] [<ffffffffa03203f6>] solo_enc_v4l2_init+0x706/0xba0 [solo6x10] [ 956.730243] [<ffffffffa03165b3>] solo_pci_probe+0x503/0x700 [solo6x10] [ 956.730245] [<ffffffff81420459>] local_pci_probe+0x49/0xa0 [ 956.730248] [<ffffffff814207a1>] pci_device_probe+0xd1/0x120 Signed-off-by:
-
Andrey Utkin authored
This fixes warning from drivers/media/v4l2-core/videobuf2-core.c, WARN_ON(atomic_read(&q->owned_by_drv_count)). Signed-off-by:
-
Joe Perches authored
Precedence of & and >> is not the same and is not left to right. shift has higher precedence and should be done after the mask. This use has a mask then shift which is not the normal style. Move the shift before the mask to match nearly all the other uses in kernel. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Prabhakar Lad authored
this patch adds support for vidioc_create_bufs. Along side remove unneeded member numbuffers. Signed-off-by:
-
Jose Alberto Reguero authored
This patch move the loop_thru configuration to the attach function, because with dual tuners until loop_tru configuration the other tuner don't work. Signed-off-by:
Jose Alberto Reguero <jareguero@telefonica.net> Reviewed-by:
-
Jose Alberto Reguero authored
This patch move the soft reset to the attach function because with dual tuners, when one tuner do reset, the other one is perturbed, and the stream has errors. Signed-off-by:
-
Mauro Carvalho Chehab authored
Needed due to some important regression fixes at RC core. * commit 'v3.18-rc4': (587 commits) Linux 3.18-rc4 ARM: dts: zynq: Enable PL clocks for Parallella tiny: rename ENABLE_DEV_COREDUMP to ALLOW_DEV_COREDUMP tiny: reverse logic for DISABLE_DEV_COREDUMP i2c: core: Dispose OF IRQ mapping at client removal time i2c: at91: don't account as iowait i2c: remove FSF address USB: Update default usb-storage delay_use value in kernel-parameters.txt sysfs: driver core: Fix glue dir race condition by gdp_mutex MIPS: Fix build with binutils 2.24.51+ xfs: track bulkstat progress by agino xfs: bulkstat error handling is broken xfs: bulkstat main loop logic is a mess xfs: bulkstat chunk-formatter has issues xfs: bulkstat chunk formatting cursor is broken xfs: bulkstat btree walk doesn't terminate mm: Fix comment before truncate_setsize() USB: cdc-acm: add quirk for control-line state requests tty: Fix pty master poll() after slave closes v2 MIPS: R3000: Fix debug output for Virtual page number ... Conflicts: drivers/media/rc/rc-main.c
-
- 09 Nov, 2014 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Catalin Marinas: - enable bpf syscall for compat - cpu_suspend fix when checking the idle state type - defconfig update * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: defconfig: update defconfig for 3.18 arm64: compat: Enable bpf syscall arm64: psci: fix cpu_suspend to check idle state type for index
-
