- 01 Dec, 2022 40 commits
-
-
Lorenzo Bianconi authored
Enable RX Wireless Ethernet Dispatch available on MT7986 Soc in oreder to offlad traffic received by WLAN NIC and forwarded to LAN/WAN one. Tested-by:
Daniel Golle <daniel@makrotopia.org> Co-developed-by:
Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
Felix Fietkau <nbd@nbd.name>
-
Sujuan Chen authored
This is a preliminary patch to introduce WED RX support for mt7915. Tested-by:
-
Sujuan Chen authored
This is a preliminary patch to introduce WED RX support for mt7915. Tested-by:
-
Lorenzo Bianconi authored
Introduce the capability to allocate WED RX buffers in mt76_dma_wed_setup routine. Tested-by:
-
Lorenzo Bianconi authored
Introduce the capability to refill WED RX buffers in mt76_dma_rx_fill utility routine. Tested-by:
-
Lorenzo Bianconi authored
Introduce the capability to configure RX WED in mt76_dma_{add,get}_buf utility routines. Tested-by: -
Sujuan Chen authored
This is a preliminary patch to introduce WED RX support for mt7915. Tested-by:
-
YN Chen authored
We should update CLC config before SAR set to synchronize all related settings. Fixes: 23bdc5d8 ("wifi: mt76: mt7921: introduce Country Location Control support") Signed-off-by:
YN Chen <YN.Chen@mediatek.com> Signed-off-by:
Deren Wu <deren.wu@mediatek.com> Signed-off-by:
-
Shayne Chen authored
Introduce is_mt7996() helper for new chipset. This is a preliminary patch to support mt7996 driver. Signed-off-by:
Shayne Chen <shayne.chen@mediatek.com> Signed-off-by:
-
Shayne Chen authored
Add starec tags which will be used in new chipset. This is a preliminary patch to add mt7996 chipset support. Signed-off-by:
-
Shayne Chen authored
Add bss info tags which will be used in new chipset. This is a preliminary patch to add mt7996 chipset support. Signed-off-by:
-
Shayne Chen authored
Add event IDs and related bit fields for unified event support. This is a preliminary patch to add mt7996 chipset support. Signed-off-by:
Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by:
Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by:
-
Shayne Chen authored
Add more unified command IDs which will be used in new chipset. This is the preliminary patch for mt7996 support. Signed-off-by:
-
Shayne Chen authored
Rename nrow_bw160 and ncol_bw160 since channel width 320 MHz will share the same field. This is a preliminary patch to add mt7996 chipset support. Signed-off-by:
MeiChia Chiu <meichia.chiu@mediatek.com> Signed-off-by:
-
Shayne Chen authored
For connac3 generation, max_ampdu_len should be filled in struct sta_rec_phy. This is a preliminary patch to add mt7996 chipset support. Signed-off-by:
-
Shayne Chen authored
Rework some macros for connac3 unified command. This is a preliminary patch to add mt7996 chipset support. Signed-off-by:
-
Sean Wang authored
The firmware can have the capability to manage the channel context scheduling on multiple roles running on the device including Station, AP and P2P GC/GO mode (will be extended based on the future patchset) to help users sharing the network with others on a single device. The firmware is able to support the channel chanctx up to 2 interface simultaneously running on the different channels. Another thing to be noted is that before the driver is going sent out the management frames, the driver has to get the privilege from the firmware to occupy the current channel context until the frame handshake is completed and then get the privilege back to the firmware. Co-developed-by:
Sean Wang <sean.wang@mediatek.com> Signed-off-by:
-
Sean Wang authored
Introduce remain_on_channel support. Additionally, we add mt7921_check_offload_capability to disable .remain_on_channel and .cancel_remain_on_channel and related configuration because those operations would rely on the fundamental MCU commands that will be only supported with newer firmware. Co-developed-by:
-
Sean Wang authored
The current hw scan cannot accept multiple hw scan requests at a time, we return the proper error code when the hw scan is still undergoing. Signed-off-by:
-
Sean Wang authored
The firmware would be in charge of braking and continuing the traffic while the channel contexts are switching between different BSS and HW SCAN in the background. Signed-off-by:
-
Quan Zhou authored
Add unified ROC cmd/event which is only supported by the newer fw. Co-developed-by:
Kaikai Hu <kaikai.hu@mediatek.com> Signed-off-by:
Quan Zhou <quan.zhou@mediatek.com> Signed-off-by:
-
Sean Wang authored
Add a chanctx parameter to mt76_connac_mcu_uni_add_bss signature to allow the firmware binds the BSS into the specific channel context. Signed-off-by:
-
Sean Wang authored
add mt76_connac_mcu_uni_set_chctx to set up the channel context per BSS in the firmware Signed-off-by:
-
Lorenzo Bianconi authored
Fix the following NULL pointer dereference avoiding to run mt76u_status_worker thread if the device is not running yet. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 PID: 98 Comm: kworker/u2:2 Not tainted 5.14.0+ #78 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: mt76 mt76u_tx_status_data RIP: 0010:mt76x02_mac_fill_tx_status.isra.0+0x82c/0x9e0 Code: c5 48 b8 00 00 00 00 00 fc ff df 80 3c 02 00 0f 85 94 01 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 34 24 4c 89 f2 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 89 01 00 00 41 8b 16 41 0f b7 RSP: 0018:ffffc900005af988 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffffc900005afae8 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff832fc661 RDI: ffffc900005afc2a RBP: ffffc900005afae0 R08: 0000000000000001 R09: fffff520000b5f3c R10: 0000000000000003 R11: fffff520000b5f3b R12: ffff88810b6132d8 R13: 000000000000ffff R14: 0000000000000000 R15: ffffc900005afc28 FS: 0000000000000000(0000) GS:ffff88811aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa0eda6a000 CR3: 0000000118f17000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: mt76x02_send_tx_status+0x1d2/0xeb0 mt76x02_tx_status_data+0x8e/0xd0 mt76u_tx_status_data+0xe1/0x240 process_one_work+0x92b/0x1460 worker_thread+0x95/0xe00 kthread+0x3a1/0x480 ret_from_fork+0x1f/0x30 Modules linked in: --[ end trace 8df5d20fc5040f65 ]-- RIP: 0010:mt76x02_mac_fill_tx_status.isra.0+0x82c/0x9e0 Code: c5 48 b8 00 00 00 00 00 fc ff df 80 3c 02 00 0f 85 94 01 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 34 24 4c 89 f2 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 89 01 00 00 41 8b 16 41 0f b7 RSP: 0018:ffffc900005af988 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffffc900005afae8 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff832fc661 RDI: ffffc900005afc2a RBP: ffffc900005afae0 R08: 0000000000000001 R09: fffff520000b5f3c R10: 0000000000000003 R11: fffff520000b5f3b R12: ffff88810b6132d8 R13: 000000000000ffff R14: 0000000000000000 R15: ffffc900005afc28 FS: 0000000000000000(0000) GS:ffff88811aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa0eda6a000 CR3: 0000000118f17000 CR4: 0000000000750ef0 PKRU: 55555554 Moreover move stat_work schedule out of the for loop. Reported-by:
Dokyung Song <dokyungs@yonsei.ac.kr> Co-developed-by:
-
Evelyn Tsai authored
The hardware reports the number of transmitting antennas not the actual number of spatial streams Co-developed-by:
Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by:
-
Nicolas Cavallari authored
The hardware simply does not support this in DBDC mode. Remove it from the HE capabilities. Signed-off-by:
Nicolas Cavallari <nicolas.cavallari@green-communications.fr> Signed-off-by:
-
Nicolas Cavallari authored
Do not hardcode beamformee 4 space-time streams support, because DBDC can only support up to 2. Fixes: 00b2e16e ("mt76: mt7915: add TxBF capabilities") Signed-off-by:
-
Nicolas Cavallari authored
mt7915 does not have a per-band number of chains unlike the other chips, it only has a total number of chains. Yet the current code would consider the total number as a per-band number. For example, it would report that a 2x2 + 2x2 DBDC card have 4 chains on each band and set chainmask to 0b1111 for the first interface and 0b11110000 for the second. Fixes: 99ad32a4 ("mt76: mt7915: add support for MT7986") Co-developed-by:
-
Ryder Lee authored
Host triggered and catastrophic event triggered firmware core dumping for basic firmware issues triage, including state reporting, task/irq info, function calltrace and MCU memory dump. Signed-off-by:
Ryder Lee <ryder.lee@mediatek.com> Signed-off-by:
-
Ryder Lee authored
Trigger firmware crash and enable full system recovery through debugfs. This also renames knob "fw_ser" to a clear-cut name "sys_recovery". Signed-off-by:
-
Bo Jiao authored
Add mt7915_reset() and refactor mt7915_mac_reset_work() to support full system recovery. Co-developed-by:
-
Bo Jiao authored
Reuse mt7915_dma_disable() to reduce duplicated code. This is a preliminary patch to enable full system reset. Co-developed-by:
-
Lorenzo Bianconi authored
Move aggregation stats array per-phy instead of share it between multiple interfaces. This is a preliminary patch to add mt7996 driver support. Signed-off-by:
-
Lorenzo Bianconi authored
This is a preliminary patch to move aggr_stats array in mt76_phy structure. Signed-off-by:
-
Lorenzo Bianconi authored
Similar to mt7915, fix stats clash between bins [4-7] in 802.11 tx aggregation histogram. Fixes: 163f4d22 ("mt76: mt7921: add MAC support") Signed-off-by:
-
Lorenzo Bianconi authored
Fix stats clash between bins [4-7] in 802.11 tx aggregation histogram. Fixes: e57b7901 ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets") Signed-off-by:
-
Ryder Lee authored
This adds selectable RTC/CTS enablement for each interface. Signed-off-by:
-
Ryder Lee authored
This adds selectable RTC/CTS enablement for each interface. Signed-off-by:
-
Ming Yen Hsieh authored
Due to information missing, the firmware may be fail on bandwidth related settings in mt7921/mt7922. Add new cmd STA_REC_HE_V2 to apply additional capabilities in 6GHz band. Tested-by:
Ben Greear <greearb@candelatech.com> Co-developed-by:
Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by:
-
Ryder Lee authored
This reports signal strength of ACK packets from the peer as measured at each interface. Tested-by:
Shurong Wen <shurong.wen@mediatek.com> Signed-off-by:
-
