- 16 May, 2012 40 commits
-
-
David Spinadel authored
iwl_fill_probe_request has used to add a wildcard ssid IE to any probe request template, now it's disabled and it will send wildcard ssid only for full scan. Instead, the highest priority ssid is set to the template. Due to adding high priority SSID to the template, it reduce IE len, but since we had only 260 bytes for IEs before changing allocation size to be dynamic, now we should have a bit more room for IEs. Signed-off-by:
David Spinadel <david.spinadel@intel.com> Reviewed-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
David Spinadel authored
Allocate scan command with dynamic size based on uCode capability and num of channels. This isn't an important fix as the previous allocation was always too large as it added the scan command size but later subtracted it (which meant it was supposed to be part of the max scan size.) Signed-off-by:
-
Johannes Berg authored
There are four instances in nl80211 of getting the channel type from the attribute and validating it, refactor those. Signed-off-by:
-
Johannes Berg authored
It should return bool, not int. The function even does return true/false. Signed-off-by:
-
Johannes Berg authored
We don't really want/need to maintain the old station flags API any more, so refuse changes to new (not yet defined) flags from the old flags API. Signed-off-by:
-
Samuel Ortiz authored
After testing our stack with large SNEP messages, we realized the fragments were arriving in reversed order. Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
-
Samuel Ortiz authored
The netlink commands and attributes, along with the socket structure definitions need to be exported. Signed-off-by:
-
Arik Nemtsov authored
Update the location of the network header when adding encryption specific headers to a skb. This allows low-level drivers to use the (now correct) location of the network header. Signed-off-by:
Arik Nemtsov <arik@wizery.com> Signed-off-by:
-
Johannes Berg authored
Add a flag for the HT format (mixed vs. greenfield) to allow drivers to report that on receive. Not all drivers will do that though, so allow drivers to set which radiotap MCS details they report. Signed-off-by:
-
Zero.Lin authored
Signed-off-by:
Zero.Lin <Zero.Lin@mediatek.com> Acked-by:
Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by:
-
Hauke Mehrtens authored
The 0x4322 ID is found on the BCM4322 used on some SoCs like the Linksys WRT610N V1 connected to a BCM4705. The 43222 (0xa8d6) ID is found on the BCM43222 used on some other SoCs like the D-Link DSL-2760U connected to a BCM63xx. Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
Janusz.Dziedzic@tieto.com authored
Add IV-room in skb also for TKIP and WEP. Extend patch: "mac80211: support adding IV-room in the skb for CCMP keys" Signed-off-by:
Janusz Dziedzic <janusz.dziedzic@tieto.com> Acked-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Avinash Patil authored
Delete custom IEs set by start_ap cfg80211 handler when stop_ap handler is called for AP interface. IE index required for deletion is stored in mwifiex_private structure. Signed-off-by:
Avinash Patil <patila@marvell.com> Signed-off-by:
Kiran Divekar <dkiran@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
-
Avinash Patil authored
This patch adds logic for setting tail beacon IE, probe response IE and assoc response IE from cfg80211_ap_settings parameter of start_ap handler into FW. RSN IE is also retrieved from tail IE buffer and sent to firmware. Signed-off-by:
-
Avinash Patil authored
1. support for setting custom IE from application hostapd etc. Custom IE addition using auto-indexing and Custom IE deletion using static indices (which are allocated during IE addition and stored in driver) are supported. 2. Separate file for handling IE related execution. Signed-off-by:
-
Avinash Patil authored
This patch takes into account AP config_type (bss config/custom ie config) while preparing AP sys_configure command buffer. Signed-off-by:
-
Avinash Patil authored
1. Support for parsing security related parameters from cfg80211_ap_settings in start_ap cfg80211 handler 2. Conversion of these security information into FW understandle TLVs and setting into FW thru sys_config command 3. key management is done on host. This ensures that FW forwards EAPOL key packets to host instead of processing on its own. Signed-off-by:
-
Avinash Patil authored
Added logic to handle AP event that are generated by the firmware. As MLME/SME is implemented in the firmware, events such as station association and deauthentication, must be sent to userspace (hostapd) for creating and deleting station database. Signed-off-by:
Yogesh Powar <yogeshp@marvell.com> Signed-off-by:
-
Avinash Patil authored
1. add start AP and stop AP handlers 2. support for parsing ssid, beacon period, DTIM period from beacon_parameters structure and setting it to FW. Signed-off-by:
-
Avinash Patil authored
Add support for setting fragmentation threshold, RTS threshold and retry limit. Since wiphy parameters are properties of physical device, appropriate function to set phy parameters is invoked depending upon bss_type(STA or AP) for each virtual interface. Signed-off-by:
-
Avinash Patil authored
mlan0: managed or ibss The iftype can be changed from STATION to ADHOC, and vice versa. uap0: AP only The iftype cannot be changed. Signed-off-by:
-
Avinash Patil authored
While in AP mode, we should stop BSS in deauthentication handler. Signed-off-by:
-
Avinash Patil authored
1. support for AP sys_config command and added parsing of channel information. 2. support for setting AP channel from cfg80211 set_channel handler Signed-off-by:
-
Avinash Patil authored
1. separate file for preparing uAP command buffer 2. definition of bss_start and bss_stop commands being sent to firmware Signed-off-by:
-
Avinash Patil authored
Modify key related cfg80211 handlers to copy peer mac address for pairwise keys. If peer mac address is not present or group keys, it will be sent as broadcast mac address. This would be required since hostapd downloads per peer PTK. Signed-off-by:
-
Avinash Patil authored
Since wiphy structure is per adapter we would save adapter, instead of mwifiex private pointer, in wiphy_priv. Also move country_info from mwifiex_private to mwifiex_adapter as making it part of mwifiex_adapter looks logical. Signed-off-by:
-
Avinash Patil authored
mwifiex supports STA and AP interfaces which use same phy. Indicate this to cfg80211. Signed-off-by:
-
Avinash Patil authored
1. wiphy structure is per device; hence moved it to mwifiex_adapter mwifiex_register_cfg80211 takes mwifiex_adapter as parameter. This function only registers wiphy with cfg80211. 2. Creation of interfaces is moved to cfg80211 add_virtual_interface handler. 3. Create 2 interfaces by default: station and AP Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
-
Avinash Patil authored
Commands like IBSS coalescing status, power save, 11D should be handled only when bss_type is STA. Signed-off-by:
-
Avinash Patil authored
Reserve space for one more priv structure. This will be used by AP interface. Signed-off-by:
-
Bjorn Helgaas authored
Use pci_is_pcie() instead of looking at obsolete is_pcie field in struct pci_dev. CC: Stefano Brivio <stefano.brivio@polimi.it> CC: b43-dev@lists.infradead.org CC: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by:
-
Johannes Berg authored
cfg80211_calculate_bitrate() doesn't work for MCS rates 32 or higher, and it has always returned 0 in that case. Warn if it ever really happens. Signed-off-by:
-
Johannes Berg authored
cfg80211_calculate_bitrate() is defined in the external header file cfg80211.h now, so no need to keep it in the internal one as well. Signed-off-by:
-
Cristian Chilipirea authored
Fixed some checkpatch warnings. Signed-off-by:
Cristian Chilipirea <cristian.chilipirea@gmail.com> Signed-off-by:
-
Johannes Berg authored
In commit 12d3952f ("mac80211: optimize aggregation session timeout handling") two bugs were introduced: 1) RCU usage was completely broken since no locks are held 2) the timer must not rearm when agg session is stopping Reported-and-tested-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by:
-
Johannes Berg authored
My queue management rework broke drivers that don't have multiple AC queues and register a single queue only, causing a warning: WARNING: at net/mac80211/iface.c:162 ieee80211_check_queues This was due to filling the queues wrongly and then noticing the error when checking later. Reported-and-Tested-by:
-
Nathan Hintz authored
Adds a missing read to flush the previous write (per the Broadcom SDK). Signed-off-by:
Nathan Hintz <nlhintz@hotmail.com> Signed-off-by:
-
Nathan Hintz authored
Add missing __devexit attribute to bcma_host_pci_remove. Signed-off-by:
-
Nathan Hintz authored
Modify ioremap_nocache calls to reflect the number of bytes read/written. Signed-off-by:
-
Nathan Hintz authored
PCI Memory Resource start address and size are variable, dependent on the H/W configuration. Modify the computation of io_map_base to use the computed values. Signed-off-by:
-
