- 18 May, 2010 40 commits
-
-
Mauro Carvalho Chehab authored
To save power soc-camera powers subdevices down, when they are not in use, if this is supported by the platform. However, the V4L standard dictates, that video nodes shall preserve configuration between uses. This requires runtime power management, which is implemented by this patch. It allows subdevice drivers to specify their runtime power-management methods, by assigning a type to the video device. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Márton Németh authored
V4L/DVB: The first two parameters of soc_camera_limit_side() are usually pointers to struct v4l2_rect elements. They are signed, so adjust the prototype accordingly This will remove the following sparse warning (see "make C=1"): * incorrect type in argument 1 (different signedness) expected unsigned int *start got signed int *<noident> as well as a couple more signedness mismatches. Signed-off-by:Márton Németh <nm127@freemail.hu> Signed-off-by:
-
Stefan Ringel authored
Reading from zl10353 with tm6000 has a bug. For example: regs w/o patch with patch 0x06 0x00 0x7f 0x07 0x33 0x30 0x08 0x00 0x00 0x09 0x58 0x50 0x0f 0x31 0x28 0x10 0x00 0x84 This patch provides the workaround for the bug [mchehab@redhat.com: Fix merge conflict and add a comment at the workaround] Signed-off-by:
Stefan Ringel <stefan.ringel@arcor.de> Signed-off-by:
-
Stefan Ringel authored
Split the i2c send and receive functions on separate functions [mchehab@redhat.com: CodingStyle and fix the logic for more than 2 read values] Signed-off-by:
-
Dmitri Belimov authored
Fix some messages for add information about TM6010 Signed-off-by:
Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by:
-
Stefan Ringel authored
The i2c addr on I2C core is specified on 7-bit format, but tm6000 expects it on 8-bit format. Signed-off-by:
-
Stefan Ringel authored
"hack" module were a temporary file with some zl10353 magic. This is not needed anymore. Just remove it. [mchehab@redhat.com: CodingStyle fixes] Signed-off-by:
-
Stefan Ringel authored
Signed-off-by:
-
Stefan Ringel authored
Signed-off-by:
-
Stefan Ringel authored
Signed-off-by:
-
Stefan Ringel authored
Signed-off-by:
-
Stefan Ringel authored
[mchehab@redhat.com: Fix CodingStyle] Signed-off-by:
-
Stefan Ringel authored
Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Udev calls an utility when it senses a v4l device. So, register needs to be delayed, otherwise it may cause block conditions. Signed-off-by: -
Julia Lawall authored
Test the just-allocated value for NULL rather than some other value. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,y; statement S; @@ x = \(kmalloc\|kcalloc\|kzalloc\)(...); ( if ((x) == NULL) S | if ( - y + x == NULL) S ) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Acked-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
-
Randy Dunlap authored
(1) tm6000 uses usb_*() interfaces, so it should depend on USB. drivers/built-in.o: In function `tm6000_usb_disconnect': tm6000-cards.c:(.text+0x4abb44): undefined reference to `usb_put_dev' drivers/built-in.o: In function `tm6000_usb_probe': tm6000-cards.c:(.text+0x4ac923): undefined reference to `usb_get_dev' tm6000-cards.c:(.text+0x4ac93c): undefined reference to `usb_set_interface' drivers/built-in.o: In function `tm6000_read_write_usb': (.text+0x4ad274): undefined reference to `usb_control_msg' drivers/built-in.o: In function `tm6000_uninit_isoc': tm6000-video.c:(.text+0x4b00d5): undefined reference to `usb_kill_urb' tm6000-video.c:(.text+0x4b00e4): undefined reference to `usb_unlink_urb' tm6000-video.c:(.text+0x4b013c): undefined reference to `usb_buffer_free' tm6000-video.c:(.text+0x4b014b): undefined reference to `usb_free_urb' drivers/built-in.o: In function `tm6000_prepare_isoc': tm6000-video.c:(.text+0x4b0773): undefined reference to `usb_alloc_urb' tm6000-video.c:(.text+0x4b0835): undefined reference to `usb_buffer_alloc' drivers/built-in.o: In function `tm6000_irq_callback': tm6000-video.c:(.text+0x4b1ad3): undefined reference to `usb_submit_urb' drivers/built-in.o: In function `tm6000_module_init': tm6000-cards.c:(.init.text+0x24499): undefined reference to `usb_register_driver' drivers/built-in.o: In function `tm6000_module_exit': tm6000-cards.c:(.exit.text+0x5cb0): undefined reference to `usb_deregister' (2) tm6000-alsa uses interfaces from tm6000-core, so when they are both built as modules, the core interfaces need to be exported. ERROR: "tm6000_set_reg" [drivers/staging/tm6000/tm6000-alsa.ko] undefined! ERROR: "tm6000_get_reg" [drivers/staging/tm6000/tm6000-alsa.ko] undefined! Cc: linux-next@vger.kernel.org, LKML <linux-kernel@vger.kernel.org>, linux-media@vger.kernel.org Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Michel Ludwig <michel.ludwig@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Stefan Ringel authored
Fix several parameter sets, in order to make dvb work Signed-off-by:
-
Stefan Ringel authored
Signed-off-by:
-
Stefan Ringel authored
Signed-off-by:
-
Stefan Ringel authored
Signed-off-by:
-
Stefan Ringel authored
Signed-off-by:
-
Stefan Ringel authored
After sending an i2c command, tm6010 needs a reset, in order to properly work. While here, add the missing I2C_CLASS_TV_DIGITAL i2c class. Signed-off-by:
-
Stefan Ringel authored
Signed-off-by:
-
Stefan Ringel authored
After successfully running tm6000_init_dev, due to a lack of a return(), the driver runs the error code, unregistering the device. Signed-off-by:
-
Mauro Carvalho Chehab authored
[mchehab@redhat.com: moved the defines for the two beholder boards to a separate commit ] Signed-off-by:
-
Mauro Carvalho Chehab authored
The missing of those board definitions break compilation Signed-off-by: -
Stefan Ringel authored
The init sequence requires extra initialization for tm6010 in digital mode. Signed-off-by:
-
Stefan Ringel authored
The name of xc5000.h include file were wrong Signed-off-by:
-
Devin Heitmueller authored
Fix a regression in the firmware loading time where it went from 1080 ms to 4700 ms. This was noticed when the em28xx based HVR-950 took noticably longer to load the driver. Regression introduced in hg 12824. The developer added an msleep() call with an argument based on a newly introduced xc3028_ctrl field, which is left initialized to zero for pretty much every board that is currently supported. Signed-off-by:
Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
-
Laurent Pinchart authored
Now that the video_device registration is tested using video_is_registered(), drivers don't need to initialize the video_device::minor field to -1 anymore. Remove those unneeded assignments. [mchehab.redhat.com: apply just the tm6000 changes on a separate patch] Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Instead of using the minor number in kernel log messages, use the device node name as returned by the video_device_node_name() function. This makes debug, informational and error messages easier to understand for end users. [mchehab.redhat.com: apply just the tm6000 changes on a separate patch] Signed-off-by:
-
Dmitri Belimov authored
Add new TV cards of Beholder for autodetect. With my best regards, Dmitry. Signed-off-by:
-
Mauro Carvalho Chehab authored
Such code has no space upstream and prevents tm6000 from compiling. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Onr warning is left, since it is there for a purpose: tm6000-core.c:218: warning: ISO C90 forbids mixed declarations and code It indicates a place where a temporary hack were added. Tests are needed to be sure that we can remove it. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by:
-
