drivers/gpu/drm/drm_syncobj.c:202:4-14: ERROR: function drm_syncobj_find_signal_pt_for_point called on line 390 inside lock on line 389 but uses GFP_KERNEL

  Find functions that refer to GFP_KERNEL but are called with locks held.

Generated by: scripts/coccinelle/locks/call_kern.cocci

v2:
syncobj->timeline still needs protect.

v3:
use a global signaled fence instead of re-allocation.

v4:
Don't need moving lock.
Don't expose func.

v5:
rename func and directly return.

Tested by: syncobj_wait and ./deqp-vk -n dEQP-VK.*semaphore* with
lock debug kernel options enabled.
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: Christian König <easy2remember.chk@googlemail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
CC: Julia Lawall <julia.lawall@lip6.fr>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/258623/

Add the device tree bindings for Truly NT35597 panel driver. This panel
driver supports both single DSI and dual DSI.

However, this patch series supports only dual DSI.

Changes in v10:
  - Remove active high in the documentation for mode gpio
  - Fix commmit text detail about the board and also
    fix a typo
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1538787139-28122-2-git-send-email-abhinavk@codeaurora.org

Add support for Truly NT35597 panel driver used in MSM reference
platforms. This panel driver supports both single DSI and dual
DSI modes.

However, this patch series adds support only for dual DSI mode.

Changes in v10:
- None
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1538787139-28122-1-git-send-email-abhinavk@codeaurora.org

The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().

The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.

drm_fbdev_generic_setup() handles mode_config.num_connector being zero.
In that case it retries fbdev setup on the next .output_poll_changed.

Cc: Yannick Fertre <yannick.fertre@st.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Yannick Fertré <yannick.fertre@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-15-noralf@tronnes.org

The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().

The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.

Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-6-noralf@tronnes.org

A while back we removed it, yet that lead to regressions. At some later
point, I've attempted to remove it again without fully grasping the
unique (pun intended) situation that virtio is in.

Add a bulky comment to document why the call should stay as-is, for the
next person who's around.

As a Tl;Dr: virtio sits on top of struct virtio_device, which confuses
dev_is_pci(), wrong info gets sent to userspace and X doesn't start.
Driver needs to explicitly call drm_dev_set_unique() to keep it working.

v2: Fix handful of typos (Laszlo)

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181024144252.16518-1-emil.l.velikov@gmail.com

Previous commit removed the only reason why we were allowing NULL as
a parent device. With that resolved, we can enforce nobody else does
that mistake.

With that we can drop the ugly drm_dev_set_unique workaround.

v2: rebase, silence checkpatch "== NULL" warning

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Deepak Sharma <deepak.sharma@amd.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023163550.15211-2-emil.l.velikov@gmail.com

Modify vgem_init to take platform dev as parent in drm_dev_init.
This will make drm device available at "/sys/devices/platform/vgem"
in x86 chromebook.

v2: rebase, address checkpatch typo and line over 80 characters

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Deepak Sharma <deepak.sharma@amd.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023163550.15211-1-emil.l.velikov@gmail.com

Set shared_max to the number of shared fences right before we release
the lock.

This way every attempt to add a shared fence without previously
reserving a slot will cause an error.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Junwei Zhang <Jerry.Zhang@amd.com>
Link: https://patchwork.kernel.org/patch/10626147/

Let's support simultaneous submissions to multiple engines.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.kernel.org/patch/10626149/

No need for that any more. Just replace the list when there isn't enough
room any more for the additional fence.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.kernel.org/patch/10626143/

Fixes the following warnings:
../drivers/gpu/drm/drm_connector.c:305: warning: Excess function parameter 'dev' description in 'drm_connector_attach_edid_property'
../drivers/gpu/drm/drm_connector.c:306: warning: Excess function parameter 'dev' description in 'drm_connector_attach_edid_property'
../drivers/gpu/drm/drm_connector.c:305: warning: Excess function parameter 'dev' description in 'drm_connector_attach_edid_property'
../drivers/gpu/drm/drm_connector.c:305: warning: Excess function parameter 'dev' description in 'drm_connector_attach_edid_property'
../drivers/gpu/drm/drm_connector.c:305: warning: Excess function parameter 'dev' description in 'drm_connector_attach_edid_property'

Fixes: 6b7e2d5c ("drm: add drm_connector_attach_edid_property()")
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181024182442.206411-1-sean@poorly.run

There's no reason to track the atomic state three times. Unfortunately,
this is currently what we're doing, and even worse is that there is only
one actually correct state pointer: the one in mst_state->base.state.
mgr->state never seems to be used, along with the one in
mst_state->state.

This confused me for over 4 hours until I realized there was no magic
behind these pointers. So, let's save everyone else from the trouble.

Signed-off-by: Lyude Paul <lyude@redhat.com>.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023231251.16883-3-lyude@redhat.com

Because we have drm_dp_atomic_find_vcpi_slots(), which actually takes
care to update the atomic state of the MST topology, prints valuable
debugging output, and actually takes references to the ports it's
checking! This explains some incorrect usage I've been seeing across the
tree...
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023231251.16883-2-lyude@redhat.com

4.19 is out, Lyude asked for a backmerge, and it's been a while. All
very good reasons on their own :-)
Signed-off-by: Sean Paul <seanpaul@chromium.org>

When vc4_plane_state is duplicated ->is_yuv is left assigned to its
previous value, and we never set it back to false when switching to
a non-YUV format.

Fix that by setting ->is_yuv to false in the 'num_planes == 1' branch
of the vc4_plane_setup_clipping_and_scaling() function.

Fixes: fc04023f ("drm/vc4: Add support for YUV planes.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181009132446.21960-1-boris.brezillon@bootlin.com

X/Y positioning of T-format buffers is quite tricky and the current
implementation was failing to position a plane using this format
correctly when the CRTC X, Y or both X and Y offsets were negative.
It was also failing when the SRC X/Y offsets were != 0.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180803092231.26446-5-boris.brezillon@bootlin.com

The offset adjustment depends on the framebuffer modified, so let's
just move this operation in the DRM_FORMAT_MOD_LINEAR case inside
vc4_plane_mode_set().

This we'll be able to fix offset calculation for
DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED and DRM_FORMAT_MOD_BROADCOM_SANDXXX.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180803092231.26446-4-boris.brezillon@bootlin.com

drm_atomic_helper_check_plane_state() takes care of checking the
scaling capabilities and calculating the clipped X/Y offsets for us.

Rely on this function instead of open-coding the logic.

Incidentally, it seems to fix a problem we had with negative X/Y
positioning of YUV planes.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180803092231.26446-3-boris.brezillon@bootlin.com

This is needed to support X/Y negative placement of planes using
T-format buffers.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180803092231.26446-2-boris.brezillon@bootlin.com

Y_OFFSET field starts at bit 8 not 7.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180803092231.26446-1-boris.brezillon@bootlin.com

The Samsung S6D16D0 is a simple comman mode only DSI display
that is used on the ST-Ericsson Ux500 reference design
TVK1281618 user interface board (UIB).

Cc: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023074630.29186-2-linus.walleij@linaro.org

This adds the device tree bindings for the Samsung S6D16D0
panel. This is a command mode only panel using DSI.

Cc: devicetree@vger.kernel.org
Cc: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023074630.29186-1-linus.walleij@linaro.org

The DSI devices have a maximum operating frequency specified
in their data sheet per the MIPI specification, and DSI hosts
that can scale their frequency need this information to set
their clock dividers right.

As current panel drivers often lack this information, specify
that setting it to zero will make the DSI host use some
reasonable default.
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023072422.25754-1-linus.walleij@linaro.org

We recently bikeshedded this to a different flavour, but forgot to
update the recommendations.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181019084311.23836-1-daniel.vetter@ffwll.ch

Shuts up warning noise.
Reviewed-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-22-daniel.vetter@ffwll.ch

Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR because its
better to have inlined function rather than code-opened implementation.
Signed-off-by: Mamta Shukla <mamtashukla555@gmail.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181018204815.GA23390@armorer

Replace dma_alloc_coherent + memset with dma_zalloc_coherent.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023040222.GA1540@jordon-HP-15-Notebook-PC

UDL doesn't support vblank functionality so we don't need to
initialize vblank here (we are able to send page flip
completion events even without vblank initialization)

Moreover current drm_vblank_init call with num_crtcs > 0 causes
sending DRM_EVENT_FLIP_COMPLETE event with zero timestamp every
time. This breaks userspace apps (for example weston) which
relies on timestamp value.

Cc: stable@vger.kernel.org
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180928144126.21598-1-Eugeniy.Paltsev@synopsys.com

convert drm_atomic_helper_suspend/resume() to use
drm_mode_config_helper_suspend/resume().

remove suspend_state field from the rcar_du_device
structure as it is no more required.

With this conversion, also drm_fbdev_cma_set_suspend_unlocked()
will left with no consumer. So this function can be removed.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180918163903.GA11172@jordon-HP-15-Notebook-PC

v2:
add a mutex between sync_cb execution and free.
v3:
clearly separating the roles for pt_lock and cb_mutex (Chris)
v4:
the cb_mutex should be taken outside of the pt_lock around
this if() block. (Chris)
v5:
fix a corner case
v6:
tidy drm_syncobj_fence_get_or_add_callback up. (Chris)

Tested by syncobj_basic and syncobj_wait of igt.
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Christian König <christian.koenig@amd.com>
Cc: intel-gfx@lists.freedesktop.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.kernel.org/patch/10652893/

If failed to find the deivice owning the boot framebuffer,
try to use the first VGA device instead of the last one.

Usually the 1st device is integrated GPU who owns the boot framebuffer.
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1535739600-8842-2-git-send-email-aaron.ma@canonical.com

EFI GOP uses 64-bit frame buffer address when some BIOS
disabled CSM support. vgaarb only stores lfb_base,
this will lead boot framebuffer to wrong device.

Add ext_lfb_base support to use 64-bit fb address.
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1535739600-8842-1-git-send-email-aaron.ma@canonical.com

The idea is to split test implementations in different compilation
units, but have one single place where we define the list of tests,
in this case(drm_modeset_selftests.h).
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181019105752.17741-9-alexandru-cosmin.gheorghe@arm.com

In-line member documentation seems to be desired way of documenting
structure members.

This change had been suggested by Daniel Vetter here:
https://lists.freedesktop.org/archives/dri-devel/2018-October/192176.htmlSigned-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181019105752.17741-2-alexandru-cosmin.gheorghe@arm.com

VESA eDP 1.4 specification has separate fields defined in
EDP_DPCD_REV for eDP 1.4a and 1.4b eDP revisions.
This patch defines those. Found this when one of my eDP panels
advertises eDP 1.4a (04h) in the EDP_DPCD_REV DPCD field.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181009002351.23085-1-manasi.d.navare@intel.com

Merge tag 'drm-intel-next-fixes-2018-10-18' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Fix GPU hang on MacBook2,1 when booting in EFI mode (Bugzilla #105637)
- Fix garbled console on Y tiled BIOS framebuffer configs (Bugzilla #108264)
- Fix black screen on certain eDP panels eg. Dell XPS 9350 (Bugzilla #107489 and #105338)
- MST fixes that Rodrigo dropped from drm-intel-fixes and bunch of Icelake fixes
- Then assorted proactive code fixes caught by CI or developers
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181018165725.GA2281@jlahtine-desk.ger.corp.intel.com

The DMA API does its own zone decisions based on the coherent_dma_mask.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181013151707.32210-7-hch@lst.de

Wait until the next vblank to be sure that crtc has been disabled.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181012094639.1585-1-benjamin.gaignard@linaro.org

This patch is for VK_KHR_timeline_semaphore extension, semaphore is called syncobj in kernel side:
This extension introduces a new type of syncobj that has an integer payload
identifying a point in a timeline. Such timeline syncobjs support the
following operations:
   * CPU query - A host operation that allows querying the payload of the
     timeline syncobj.
   * CPU wait - A host operation that allows a blocking wait for a
     timeline syncobj to reach a specified value.
   * Device wait - A device operation that allows waiting for a
     timeline syncobj to reach a specified value.
   * Device signal - A device operation that allows advancing the
     timeline syncobj to a specified value.

v1:
Since it's a timeline, that means the front time point(PT) always is signaled before the late PT.
a. signal PT design:
Signal PT fence N depends on PT[N-1] fence and signal opertion fence, when PT[N] fence is signaled,
the timeline will increase to value of PT[N].
b. wait PT design:
Wait PT fence is signaled by reaching timeline point value, when timeline is increasing, will compare
wait PTs value with new timeline value, if PT value is lower than timeline value, then wait PT will be
signaled, otherwise keep in list. syncobj wait operation can wait on any point of timeline,
so need a RB tree to order them. And wait PT could ahead of signal PT, we need a sumission fence to
perform that.

v2:
1. remove unused DRM_SYNCOBJ_CREATE_TYPE_NORMAL. (Christian)
2. move unexposed denitions to .c file. (Daniel Vetter)
3. split up the change to drm_syncobj_find_fence() in a separate patch. (Christian)
4. split up the change to drm_syncobj_replace_fence() in a separate patch.
5. drop the submission_fence implementation and instead use wait_event() for that. (Christian)
6. WARN_ON(point != 0) for NORMAL type syncobj case. (Daniel Vetter)

v3:
1. replace normal syncobj with timeline implemenation. (Vetter and Christian)
    a. normal syncobj signal op will create a signal PT to tail of signal pt list.
    b. normal syncobj wait op will create a wait pt with last signal point, and this wait PT is only signaled by related signal point PT.
2. many bug fix and clean up
3. stub fence moving is moved to other patch.

v4：
1. fix RB tree loop with while(node=rb_first(...)). (Christian)
2. fix syncobj lifecycle. (Christian)
3. only enable_signaling when there is wait_pt. (Christian)
4. fix timeline path issues.
5. write a timeline test in libdrm

v5: (Christian)
1. semaphore is called syncobj in kernel side.
2. don't need 'timeline' characters in some function name.
3. keep syncobj cb.

v6: (Christian)
1. merge syncobj_timeline to syncobj structure.
2. simplify some check sentences.
3. some misc change.
4. fix CTS failed issue.

v7: (Christian)
1. error handling when creating signal pt.
2. remove timeline naming in func.
3. export flags in find_fence.
4. allow reset timeline.

v8:
1. use wait_event_interruptible without timeout
2. rename _TYPE_INDIVIDUAL to _TYPE_BINARY

v9:
1. rename signal_pt->base to signal_pt->fence_array to avoid misleading
2. improve kerneldoc

individual syncobj is tested by ./deqp-vk -n dEQP-VK*semaphore*
timeline syncobj is tested by ./amdgpu_test -s 9
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Cc: Christian Konig <christian.koenig@amd.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Rakos <Daniel.Rakos@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/257258/