- 23 Jun, 2020 5 commits
-
-
Fred Oh authored
When removing the machine driver, the rt5682 jack handler will oops if jack detection is not disabled. The jack can be disabled in the dai link's exit(). This is symmetrical change as jack is enabled in init(). Signed-off-by:
Fred Oh <fred.oh@linux.intel.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20200622154241.29053-6-pierre-louis.bossart@linux.intel.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Fred Oh authored
Move disabling jack from platform driver's remove() to dai link's exit(). This is symmetrical change as jack is enabled in init(). Signed-off-by:
-
Pierre-Louis Bossart authored
The gpiod handling is inspired from the bdw-rt5677 code. Apply same fix to avoid reference count issue while removing modules for consistency. Suggested-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Curtis Malainey <curtis@malainey.com> Link: https://lore.kernel.org/r/20200622154241.29053-4-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
The mainline code currently prevents modules from being removed. The BE dailink .init() function calls devm_gpiod_get() using the codec component device as argument. When the machine driver is removed, the references to the gpiod are not released, and it's not possible to remove the codec driver module - which is the only entity which could free the gpiod. This conceptual deadlock can be avoided by invoking gpiod_get() in the .init() callback, and calling gpiod_put() in the exit() callback. Tested on SAMUS Chromebook with SOF driver. Suggested-by:
-
Pierre-Louis Bossart authored
Some machine drivers allocate or request resources with snd_soc_link_init() phase of the card probe. These resources need to be properly released when removing a card, and this patch suggests a dual exit() callback. The exit() is invoked in soc_remove_pcm_runtime(), which is not completely symmetric with the init() invoked in soc_init_pcm_runtime(). Alternate solutions were considered, e.g. adding a .remove() callback for the platform driver, but that's not symmetrical at all and would be difficult to handle if there are more than one dailink implementing an .init(). We looked also into using .remove_dai_link() callback, but that would also be imbalanced. Note that because of the error handling in snd_soc_bind_card(), which jumps to probe_end, there is no way to guarantee the exit() is invoked with resources allocated in the init(). Prior to releasing those resources, implementations of the exit() callback shall check the resources are valid. Suggested-by:
-
- 22 Jun, 2020 18 commits
-
-
Mark Brown authored
Merge series "ASoC: merge snd_soc_component_read() and snd_soc_component_read32()" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: Hi Mark Because we can use "read" function which is using "regmap" or "driver", current ALSA SoC drivers are using both snd_soc_component_read() // for regmap snd_soc_component_read32() // for driver callback These are similar but needs different parameter. This patch aggressively merge snd_soc_component_read() and _read32(), and makes snd_soc_component_read/write() as generally style. New read doesn't return error if it failed, thus, it can't keep compatibility, but assuming it is not a big problem. Because 1) it will indicate error message, 2) it can do nothing anyway if it fails "read". [02/16] patch is not directly connected to read function merging, but need to be apply after [01/16]. Kuninori Morimoto (16): ASoC: soc-component: merge snd_soc_component_read() and snd_soc_component_read32() ASoC: soc-component: use io_mutex correctly ASoC: pxa: rename to snd_soc_component_read() ASoC: atmel: rename to snd_soc_component_read() ASoC: codecs: rename to snd_soc_component_read() ASoC: codecs: wcd*: rename to snd_soc_component_read() ASoC: codecs: tlv*: rename to snd_soc_component_read() ASoC: codecs: max*: rename to snd_soc_component_read() ASoC: codecs: msm*: rename to snd_soc_component_read() ASoC: codecs: alc*: rename to snd_soc_component_read() ASoC: codecs: wm*: rename to snd_soc_component_read() ASoC: codecs: rt*: rename to snd_soc_component_read() ASoC: codecs: da*: rename to snd_soc_component_read() ASoC: codecs: cs*: rename to snd_soc_component_read() ASoC: codecs: ak*: rename to snd_soc_component_read() ASoC: remove snd_soc_component_read32() include/sound/soc-component.h | 4 +- sound/soc/atmel/atmel-pdmic.c | 4 +- sound/soc/codecs/88pm860x-codec.c | 14 ++--- sound/soc/codecs/ab8500-codec.c | 8 +-- sound/soc/codecs/ad1980.c | 4 +- sound/soc/codecs/ak4458.c | 2 +- sound/soc/codecs/ak4535.c | 4 +- sound/soc/codecs/ak4613.c | 4 +- sound/soc/codecs/ak4671.c | 8 +-- sound/soc/codecs/alc5623.c | 6 +- sound/soc/codecs/alc5632.c | 6 +- sound/soc/codecs/arizona.c | 18 +++--- sound/soc/codecs/cs4270.c | 10 +-- sound/soc/codecs/cs42l42.c | 2 +- sound/soc/codecs/cs42l51.c | 8 +-- sound/soc/codecs/cs42l73.c | 4 +- sound/soc/codecs/cs47l35.c | 10 +-- sound/soc/codecs/cs47l85.c | 10 +-- sound/soc/codecs/da7210.c | 24 ++++---- sound/soc/codecs/da7213.c | 24 ++++---- sound/soc/codecs/da7218.c | 34 +++++------ sound/soc/codecs/da7219-aad.c | 16 ++--- sound/soc/codecs/da7219.c | 20 +++--- sound/soc/codecs/da732x.c | 18 +++--- sound/soc/codecs/da9055.c | 14 ++--- sound/soc/codecs/inno_rk3036.c | 6 +- sound/soc/codecs/madera.c | 49 +++------------ sound/soc/codecs/max98088.c | 12 ++-- sound/soc/codecs/max98090.c | 20 +++--- sound/soc/codecs/max98095.c | 16 ++--- sound/soc/codecs/max9850.c | 2 +- sound/soc/codecs/msm8916-wcd-analog.c | 14 ++--- sound/soc/codecs/msm8916-wcd-digital.c | 16 ++--- sound/soc/codecs/nau8822.c | 6 +- sound/soc/codecs/rt1305.c | 2 +- sound/soc/codecs/rt298.c | 2 +- sound/soc/codecs/rt5616.c | 2 +- sound/soc/codecs/rt5631.c | 32 +++++----- sound/soc/codecs/rt5640.c | 10 +-- sound/soc/codecs/rt5645.c | 16 ++--- sound/soc/codecs/rt5651.c | 6 +- sound/soc/codecs/rt5659.c | 14 ++--- sound/soc/codecs/rt5660.c | 2 +- sound/soc/codecs/rt5663.c | 34 +++++------ sound/soc/codecs/rt5665.c | 16 ++--- sound/soc/codecs/rt5668.c | 16 ++--- sound/soc/codecs/rt5670.c | 18 +++--- sound/soc/codecs/rt5682-i2c.c | 2 +- sound/soc/codecs/rt5682.c | 19 +++--- sound/soc/codecs/sgtl5000.c | 16 ++--- sound/soc/codecs/sta32x.c | 4 +- sound/soc/codecs/tas2552.c | 4 +- sound/soc/codecs/tas5720.c | 4 +- sound/soc/codecs/tda7419.c | 9 +-- sound/soc/codecs/tlv320aic23.c | 14 ++--- sound/soc/codecs/tlv320aic26.c | 4 +- sound/soc/codecs/tlv320aic32x4.c | 16 ++--- sound/soc/codecs/tlv320aic3x.c | 14 ++--- sound/soc/codecs/tscs42xx.c | 4 +- sound/soc/codecs/tscs454.c | 24 ++------ sound/soc/codecs/wcd-clsh-v2.c | 2 +- sound/soc/codecs/wcd9335.c | 48 +++++++-------- sound/soc/codecs/wcd934x.c | 52 ++++++++-------- sound/soc/codecs/wm2200.c | 4 +- sound/soc/codecs/wm5100.c | 18 +++--- sound/soc/codecs/wm5110.c | 6 +- sound/soc/codecs/wm8350.c | 32 +++++----- sound/soc/codecs/wm8400.c | 50 +++++++-------- sound/soc/codecs/wm8510.c | 28 ++++----- sound/soc/codecs/wm8523.c | 6 +- sound/soc/codecs/wm8580.c | 12 ++-- sound/soc/codecs/wm8711.c | 8 +-- sound/soc/codecs/wm8728.c | 10 +-- sound/soc/codecs/wm8731.c | 6 +- sound/soc/codecs/wm8750.c | 8 +-- sound/soc/codecs/wm8753.c | 42 ++++++------- sound/soc/codecs/wm8770.c | 2 +- sound/soc/codecs/wm8776.c | 2 +- sound/soc/codecs/wm8804.c | 2 +- sound/soc/codecs/wm8900.c | 22 +++---- sound/soc/codecs/wm8903.c | 20 +++--- sound/soc/codecs/wm8904.c | 16 ++--- sound/soc/codecs/wm8940.c | 32 +++++----- sound/soc/codecs/wm8955.c | 2 +- sound/soc/codecs/wm8958-dsp2.c | 18 +++--- sound/soc/codecs/wm8960.c | 20 +++--- sound/soc/codecs/wm8961.c | 58 +++++++++--------- sound/soc/codecs/wm8962.c | 31 +++++----- sound/soc/codecs/wm8971.c | 8 +-- sound/soc/codecs/wm8974.c | 24 ++++---- sound/soc/codecs/wm8978.c | 12 ++-- sound/soc/codecs/wm8983.c | 8 +-- sound/soc/codecs/wm8985.c | 8 +-- sound/soc/codecs/wm8988.c | 12 ++-- sound/soc/codecs/wm8990.c | 18 +++--- sound/soc/codecs/wm8991.c | 38 ++++++------ sound/soc/codecs/wm8993.c | 28 ++++----- sound/soc/codecs/wm8994.c | 60 +++++++++--------- sound/soc/codecs/wm8995.c | 16 ++--- sound/soc/codecs/wm8996.c | 30 ++++----- sound/soc/codecs/wm8998.c | 8 +-- sound/soc/codecs/wm9081.c | 36 +++++------ sound/soc/codecs/wm9090.c | 4 +- sound/soc/codecs/wm9713.c | 2 +- sound/soc/codecs/wm_hubs.c | 30 ++++----- sound/soc/fsl/fsl_audmix.c | 10 +-- sound/soc/fsl/fsl_easrc.c | 5 +- sound/soc/meson/aiu-encoder-i2s.c | 3 +- sound/soc/meson/aiu-fifo-i2s.c | 3 +- sound/soc/meson/aiu-fifo.c | 3 +- sound/soc/pxa/mioa701_wm9713.c | 8 +-- sound/soc/soc-ac97.c | 7 +-- sound/soc/soc-component.c | 84 ++++++++++++++------------ sound/soc/soc-dapm.c | 31 ++++------ sound/soc/soc-ops.c | 43 +++---------- 115 files changed, 854 insertions(+), 963 deletions(-) -- 2.25.1
-
Vlad Karpovich authored
Exposed additional mixer controls to select calibration or diagnostic firmware. 'Calibration' --> chip-dsp<id>-spk-cali.wmfw (.bin) 'Diagnostic' --> chip-dsp<id>-spk-diag.wmfw (.bin) Signed-off-by:
Vlad Karpovich <Vlad.Karpovich@cirrus.com> Signed-off-by:
David Rhodes <david.rhodes@cirrus.com> Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20200619212651.2739-1-david.rhodes@cirrus.comSigned-off-by:
-
Kuninori Morimoto authored
No driver is using snd_soc_component_read32() anymore. This patch removes it. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/877dw74mbv.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
We need to use snd_soc_component_read() instead of snd_soc_component_read32() This patch renames _read32() to _read() Signed-off-by:
-
Kuninori Morimoto authored
We need to use snd_soc_component_read() instead of snd_soc_component_read32() This patch renames _read32() to _read() Signed-off-by:
-
Kuninori Morimoto authored
We need to use snd_soc_component_read() instead of snd_soc_component_read32() This patch renames _read32() to _read() Signed-off-by:
Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Link: https://lore.kernel.org/r/87bllj4mc8.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
We need to use snd_soc_component_read() instead of snd_soc_component_read32() This patch renames _read32() to _read() Signed-off-by:
-
Kuninori Morimoto authored
We need to use snd_soc_component_read() instead of snd_soc_component_read32() This patch renames _read32() to _read() Signed-off-by:
-
Kuninori Morimoto authored
We need to use snd_soc_component_read() instead of snd_soc_component_read32() This patch renames _read32() to _read() Signed-off-by:
-
Kuninori Morimoto authored
We need to use snd_soc_component_read() instead of snd_soc_component_read32() This patch renames _read32() to _read() Signed-off-by:
-
Kuninori Morimoto authored
We need to use snd_soc_component_read() instead of snd_soc_component_read32() This patch renames _read32() to _read() Signed-off-by:
-
Kuninori Morimoto authored
We need to use snd_soc_component_read() instead of snd_soc_component_read32() This patch renames _read32() to _read() Signed-off-by:
-
Kuninori Morimoto authored
We need to use snd_soc_component_read() instead of snd_soc_component_read32() This patch renames _read32() to _read() Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/87lfkn4mdy.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
We need to use snd_soc_component_read() instead of snd_soc_component_read32() This patch renames _read32() to _read() Signed-off-by:
-
Kuninori Morimoto authored
We need to use snd_soc_component_read() instead of snd_soc_component_read32() This patch renames _read32() to _read() Signed-off-by:
-
Kuninori Morimoto authored
We need to use snd_soc_component_read() instead of snd_soc_component_read32() This patch renames _read32() to _read() Signed-off-by:
-
Kuninori Morimoto authored
component has io_mutex, but it had been used at snd_soc_component_update_bits_legacy() only which does read and write. static int snd_soc_component_update_bits_legacy(...) { ... => mutex_lock(&component->io_mutex); ... old = snd_soc_component_read(...); ... ret = snd_soc_component_write(...); ... => mutex_unlock(&component->io_mutex); ... } It is pointless if it is not used with both read and write functions. This patch uses io_mutex correctly with read/write. Here, xxx_no_lock() is local functions. static int snd_soc_component_read(...) { ... => mutex_lock(&component->io_mutex); val = soc_component_read_no_lock(...); => mutex_unlock(&component->io_mutex); ... } static int snd_soc_component_write(...) { ... => mutex_lock(&component->io_mutex); ret = soc_component_write_no_lock(...); => mutex_unlock(&component->io_mutex); ... } static int snd_soc_component_update_bits_legacy(...) { ... => mutex_lock(&component->io_mutex); ... old = soc_component_read_no_lock(...); ... ret = soc_component_write_no_lock(...); ... => mutex_unlock(&component->io_mutex); ... } Signed-off-by: -
Kuninori Morimoto authored
We had read/write function for Codec, Platform, etc, but these has been merged into snd_soc_component_read/write(). Internally, it is using regmap or driver function. In read case, each styles are like below regmap ret = regmap_read(..., reg, &val); driver function val = xxx->read(..., reg); Because of this kind of different style, to keep same read style, when we merged each read function into snd_soc_component_read(), we created snd_soc_component_read32(), like below. commit 738b49ef ("ASoC: add snd_soc_component_read32") (1) val = snd_soc_component_read32(component, reg); (2) ret = snd_soc_component_read(component, reg, &val); Many drivers are using snd_soc_component_read32(), and some drivers are using snd_soc_component_read() today. In generally, we don't check read function successes, because, we will have many other issues at initial timing if read function didn't work. Now we can use soc_component_err() when error case. This means, it is easy to notice if error occurred. This patch aggressively merge snd_soc_component_read() and _read32(), and makes snd_soc_component_read/write() as generally style. This patch do 1) merge snd_soc_component_read() and snd_soc_component_read32() 2) it uses soc_component_err() when error case (easy to notice) 3) keeps read32 for now by #define 4) update snd_soc_component_read() for all drivers Because _read() user drivers are not too many, this patch changes all user drivers. Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/87sgev4mfl.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
- 19 Jun, 2020 2 commits
-
-
John Stultz authored
CROS_EC isn't strictly required for audio to work on other SDM845 platforms (like the Dragonboard 845c). So lets remove the dependency and select the related CROS_EC options via imply. Signed-off-by:
John Stultz <john.stultz@linaro.org> Reviewed-by:
-
Shengjiu Wang authored
Add pm runtime support and move clock handling there. Close the clocks at suspend to reduce the power consumption. fsl_spdif_suspend is replaced by pm_runtime_force_suspend. fsl_spdif_resume is replaced by pm_runtime_force_resume. Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Link: https://lore.kernel.org/r/579c0d71e976f34f23f40daa9f1aa06c4baca2f1.1592552389.git.shengjiu.wang@nxp.comSigned-off-by:
-
- 18 Jun, 2020 1 commit
-
-
Ravulapati Vishnu vardhan rao authored
In trigger we already get the selected instance details from runtime->private_data.So, removing the local initialization which may corrupt the instance selected details and this leads to corrupt data. Signed-off-by:
Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com> Link: https://lore.kernel.org/r/20200618072624.27047-1-Vishnuvardhanrao.Ravulapati@amd.comSigned-off-by:
-
- 17 Jun, 2020 9 commits
-
-
Pierre-Louis Bossart authored
Blindly adding an sof- prefix to the card name is not user friendly and causes UCM issues with a driver name truncated to 16 characters. Simplify to use "sof-bdw <codec_name>" pattern for all Broadwell machine drivers. The sof- prefix is added by the core. A generic "SOF" driver name is used, and UCMv2 will detect the configuration for this driver by testing the card name. Legacy uses are unmodified. Suggested-by:
Jaroslav Kysela <perex@perex.cz> Signed-off-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20200617165616.18511-4-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
Blindly adding an sof- prefix to the card name is not user friendly and causes UCM issues with a driver name truncated to 16 characters. Simplify to use "sof-bytcht <codec_name>" pattern for all cht* machine drivers. The sof- prefix is added by the core. A generic "SOF" driver name is used, and UCMv2 will detect the configuration for this driver by testing the card name. Legacy uses are unmodified. Suggested-by:
-
Pierre-Louis Bossart authored
Blindly adding an sof- prefix to the card name is not user friendly and causes UCM issues with a driver name truncated to 16 characters. Simplify to use "sof-bytcht <codec_name>" pattern for all byt* machine drivers. The sof- prefix is added by the core. A generic "SOF" driver name is used, and UCMv2 will detect the configuration for this driver by testing the card name. Legacy uses are unmodified. Suggested-by:
-
Jerome Brunet authored
When axg card driver support is enabled, lets enable the related internal DAC glue by default. Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20200617155047.1187256-1-jbrunet@baylibre.comSigned-off-by:
-
Shengjiu Wang authored
The one difference on imx6sx platform is that the root clock is shared with ASRC module, so we add a new flags "shared_root_clock" which means the root clock is not independent, then we will not do the clk_set_rate and clk_round_rate to avoid impact ASRC module usage. As add a new flags, we include the soc specific data struct. Signed-off-by:
-
Shengjiu Wang authored
Add new compatible string "fsl,imx6sx-spdif" in the binding document. And add compatible string "fsl,vf610-spdif" which was missed before. Signed-off-by:
-
Shengjiu Wang authored
The MQS codec isn't an i2c device, so use of_find_device_by_node to get platform device pointer. Because MQS only support playback, then add a new audio map. And there maybe "model" property or no "audio-routing" property in devicetree, so add some enhancement for these two property. Signed-off-by:
-
Shengjiu Wang authored
Add compatible string "fsl,imx-audio-mqs" for MQS, and move "audio-routing" property to be optional for MQS doesn't need such property. Signed-off-by:
-
Qiushi Wu authored
Calling pm_runtime_get_sync increments the counter even in case of failure, causing incorrect ref count if pm_runtime_put is not called in error handling paths. Call pm_runtime_put if pm_runtime_get_sync fails. Signed-off-by:
Qiushi Wu <wu000273@umn.edu> Reviewed-by:
Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20200613204422.24484-1-wu000273@umn.eduSigned-off-by:
-
- 16 Jun, 2020 1 commit
-
-
Jack Yu authored
Flush DAC data before playback. Signed-off-by:
Jack Yu <jack.yu@realtek.com> Link: https://lore.kernel.org/r/20200616023644.4523-1-jack.yu@realtek.comSigned-off-by:
-
- 15 Jun, 2020 4 commits
-
-
Mark Brown authored
Fix several warnings with "make W=1" Shengjiu Wang (3): ASoC: fsl_easrc: Fix -Wmissing-prototypes warning ASoC: fsl_easrc: Fix -Wunused-but-set-variable ASoC: fsl_easrc: Fix "Function parameter not described" warnings sound/soc/fsl/fsl_easrc.c | 42 +++++++++++++++++---------------------- 1 file changed, 18 insertions(+), 24 deletions(-) -- 2.21.0
-
Mark Brown authored
Merge series "ASoC: Intel: Add KeemBay ASoC platform driver" from Sia Jee Heng <jee.heng.sia@intel.com>: The below series of patches support the KeemBay ASoC platform driver. The platform driver initialize the i2s to capture and playback the pcm data on the ARM. The i2s is running in polling mode. There is no DSP in the KeemBay SoC. Users are rely on the Gstreamer plugin to perform Audio preprocessing. Audio graph card is used to connect the platform driver with the tlv320aic3204 codec. Change History: v5: - Remove OF dependency from Kconfig as OF is shifted to audio graph card. v4: - Reduce if-otology at the tx/rx function. - Fix indentation. - specify .rate directly v3: - Adjusted header format. - Use Audio graph card instead of custom sound card. - Use if-else instead of conditional operator. - Enabled .set_fmt to configure master clock. v2: - Corrected I2S naming for DT binding. v1: - Initial version. Sia Jee Heng (3): ASoC: Intel: Add KeemBay platform driver ASoC: Intel: Add makefiles and kconfig changes for KeemBay dt-bindings: sound: Add documentation for KeemBay i2s .../bindings/sound/intel,keembay-i2s.yaml | 68 +++ sound/soc/intel/Kconfig | 7 + sound/soc/intel/Makefile | 1 + sound/soc/intel/keembay/Makefile | 4 + sound/soc/intel/keembay/kmb_platform.c | 654 +++++++++++++++++++++ sound/soc/intel/keembay/kmb_platform.h | 145 +++++ 6 files changed, 879 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml create mode 100644 sound/soc/intel/keembay/Makefile create mode 100644 sound/soc/intel/keembay/kmb_platform.c create mode 100644 sound/soc/intel/keembay/kmb_platform.h -- 1.9.1
-
Mark Brown authored
Merge series "ASoC: improve core dmesg logs and verbosity" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Try to both reduce useless verbosity and keep useful error reports. Pierre-Louis Bossart (3): ASoC: soc-core: reduce verbosity of BE override message ASoC: soc-pcm: improve error messages in soc_pcm_new() ASoC: soc-pcm/compress: reduce verbosity on mapping ok messages sound/soc/soc-compress.c | 4 ++-- sound/soc/soc-core.c | 4 ++-- sound/soc/soc-pcm.c | 13 +++++++------ 3 files changed, 11 insertions(+), 10 deletions(-) -- 2.20.1
-
Mark Brown authored
Commit 1a0f2433 ("ASoC: max98357a: Add ACPI HID MAX98360A") supports MAX98360A in ACPI world. This series supports MAX98360A in OF world. Tzung-Bi Shih (2): ASoC: max98357a: add compatible string for MAX98360A ASoC: dt-bindings: add compatible string for MAX98360A .../devicetree/bindings/sound/max98357a.txt | 12 +++++++++--- sound/soc/codecs/max98357a.c | 1 + 2 files changed, 10 insertions(+), 3 deletions(-) -- 2.27.0.278.ge193c7cf3a9-goog
-
