- 04 Mar, 2015 5 commits
-
-
Eric W. Biederman authored
For MPLS I am building the code so that either the neighbour mac address can be specified or we can have a next hop in ipv4 or ipv6. The kind of next hop we have is indicated by the neighbour table pointer. A neighbour table pointer of NULL is a link layer address. A non-NULL neighbour table pointer indicates which neighbour table and thus which address family the next hop address is in that we need to look up. The code either sends a packet directly or looks up the appropriate neighbour table entry and sends the packet. Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric W. Biederman authored
While looking at the mpls code I found myself writing yet another version of neigh_lookup_noref. We currently have __ipv4_lookup_noref and __ipv6_lookup_noref. So to make my work a little easier and to make it a smidge easier to verify/maintain the mpls code in the future I stopped and wrote ___neigh_lookup_noref. Then I rewote __ipv4_lookup_noref and __ipv6_lookup_noref in terms of this new function. I tested my new version by verifying that the same code is generated in ip_finish_output2 and ip6_finish_output2 where these functions are inlined. To get to ___neigh_lookup_noref I added a new neighbour cache table function key_eq. So that the static size of the key would be available. I also added __neigh_lookup_noref for people who want to to lookup a neighbour table entry quickly but don't know which neibhgour table they are going to look up. Signed-off-by:
-
Johannes Berg authored
When the STP timer fires, it can call br_ifinfo_notify(), which in turn ends up in the new br_get_link_af_size(). This function is annotated to be using RTNL locking, which clearly isn't the case here, and thus lockdep warns: =============================== [ INFO: suspicious RCU usage. ] 3.19.0+ #569 Not tainted ------------------------------- net/bridge/br_private.h:204 suspicious rcu_dereference_protected() usage! Fix this by doing RCU locking here. Fixes: b7853d73 ("bridge: add vlan info to bridge setlink and dellink notification messages") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Acked-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Conflicts: drivers/net/ethernet/rocker/rocker.c The rocker commit was two overlapping changes, one to rename the ->vport member to ->pport, and another making the bitmask expression use '1ULL' instead of plain '1'. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-nextDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-03-03 This series contains updates to fm10k, i40e and i40evf. Matthew updates the fm10k driver by cleaning up code comments and whitespace issues. Also modifies the tunnel length header check, to make it more robust by calculating the inner L4 header length based on whether it is TCP or UDP. Implemented ndo_features_check() that allows drivers to report their offload capabilities per-skb. Neerav updates the i40e driver to skip over priority tagging if DCB is not enabled. Fixes an issue where the driver is not flushing out the DCBNL app table for applications that are not present in the local DCBX application configuration TLVs. Fixed i40e where, in the case of MFP mode, the driver was returning the incorrect number of traffic classes for partitions that are not enabled for iSCSI. Even though the driver was not configuring these traffic classes in the transmit scheduler for the NIC partitions, it does use this map to setup the queue mappings. Shannon updates i40e/i40evf to include the firmware build number in the formatted firmware version string. Akeem adds a safety net (by adding a 'default' case) for the possible unmatched switch calls. Mitch updates i40e to not automatically disable PF loopback at runtime, now that we have the functionality to enable and disable PF loopback. This fix cleans up a bogus error message when removing the PF module with VFs enabled. Adds a extra check to make sure that the indirection table pointer is valid before dereferencing it. Anjali enables i40e to enable more than the max RSS qps when running in a single TC mode for the main VSI. It is possible to enable as many as num_online_cpus(). Adds a firmware check to ensure that DCB is disabled for firmware versions older than 4.33. Updates i40e/i40evf to add missing packet types for VXLAN offload. Updated i40e to be able to handle varying RSS table size for each VSI, since all VSI's do not have the same RSS table size. v2: Dropped previous patch #9 "i40e/i40evf: Add capability to gather VEB per TC stats" since the stats should be in ethtool and not debugfs. ==================== Signed-off-by:
-
- 03 Mar, 2015 35 commits
-
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull nfsd fixes from Bruce Fields: "Three miscellaneous bugfixes, most importantly the clp->cl_revoked bug, which we've seen several reports of people hitting" * 'for-4.0' of git://linux-nfs.org/~bfields/linux: sunrpc: integer underflow in rsc_parse() nfsd: fix clp->cl_revoked list deletion causing softlock in nfsd svcrpc: fix memory leak in gssp_accept_sec_context_upcall
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) If an IPVS tunnel is created with a mixed-family destination address, it cannot be removed. Fix from Alexey Andriyanov. 2) Fix module refcount underflow in netfilter's nft_compat, from Pablo Neira Ayuso. 3) Generic statistics infrastructure can reference variables sitting on a released function stack, therefore use dynamic allocation always. Fix from Ignacy Gawędzki. 4) skb_copy_bits() return value test is inverted in ip_check_defrag(). 5) Fix network namespace exit in openvswitch, we have to release all of the per-net vports. From Pravin B Shelar. 6) Fix signedness bug in CAIF's cfpkt_iterate(), from Dan Carpenter. 7) Fix rhashtable grow/shrink behavior, only expand during inserts and shrink during deletes. From Daniel Borkmann. 8) Netdevice names with semicolons should never be allowed, because they serve as a separator. From Matthew Thode. 9) Use {,__}set_current_state() where appropriate, from Fabian Frederick. 10) Revert byte queue limits support in r8169 driver, it's causing regressions we can't figure out. 11) tcp_should_expand_sndbuf() erroneously uses tp->packets_out to measure packets in flight, properly use tcp_packets_in_flight() instead. From Neal Cardwell. 12) Fix accidental removal of support for bluetooth in CSR based Intel wireless cards. From Marcel Holtmann. 13) We accidently added a behavioral change between native and compat tasks, wrt testing the MSG_CMSG_COMPAT bit. Just ignore it if the user happened to set it in a native binary as that was always the behavior we had. From Catalin Marinas. 14) Check genlmsg_unicast() return valud in hwsim netlink tx frame handling, from Bob Copeland. 15) Fix stale ->radar_required setting in mac80211 that can prevent starting new scans, from Eliad Peller. 16) Fix memory leak in nl80211 monitor, from Johannes Berg. 17) Fix race in TX index handling in xen-netback, from David Vrabel. 18) Don't enable interrupts in amx-xgbe driver until all software et al. state is ready for the interrupt handler to run. From Thomas Lendacky. 19) Add missing netlink_ns_capable() checks to rtnl_newlink(), from Eric W Biederman. 20) The amount of header space needed in macvtap was not calculated properly, fix it otherwise we splat past the beginning of the packet. From Eric Dumazet. 21) Fix bcmgenet TCP TX perf regression, from Jaedon Shin. 22) Don't raw initialize or mod timers, use setup_timer() and mod_timer() instead. From Vaishali Thakkar. 23) Fix software maintained statistics in bcmgenet and systemport drivers, from Florian Fainelli. 24) DMA descriptor updates in sh_eth need proper memory barriers, from Ben Hutchings. 25) Don't do UDP Fragmentation Offload on RAW sockets, from Michal Kubecek. 26) Openvswitch's non-masked set actions aren't constructed properly into netlink messages, fix from Joe Stringer. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits) openvswitch: Fix serialization of non-masked set actions. gianfar: Reduce logging noise seen due to phy polling if link is down ibmveth: Add function to enable live MAC address changes net: bridge: add compile-time assert for cb struct size udp: only allow UFO for packets from SOCK_DGRAM sockets sh_eth: Really fix padding of short frames on TX Revert "sh_eth: Enable Rx descriptor word 0 shift for r8a7790" sh_eth: Fix RX recovery on R-Car in case of RX ring underrun sh_eth: Ensure proper ordering of descriptor active bit write/read net/mlx4_en: Disbale GRO for incoming loopback/selftest packets net/mlx4_core: Fix wrong mask and error flow for the update-qp command net: systemport: fix software maintained statistics net: bcmgenet: fix software maintained statistics rxrpc: don't multiply with HZ twice rxrpc: terminate retrans loop when sending of skb fails net/hsr: Fix NULL pointer dereference and refcnt bugs when deleting a HSR interface. net: pasemi: Use setup_timer and mod_timer net: stmmac: Use setup_timer and mod_timer net: 8390: axnet_cs: Use setup_timer and mod_timer net: 8390: pcnet_cs: Use setup_timer and mod_timer ... -
Joe Perches authored
Use the built-in function instead of memset. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
Use the built-in function instead of memset. Signed-off-by:
-
Joe Perches authored
Use the built-in function instead of memset. Signed-off-by:
-
Joe Perches authored
Use the built-in function instead of memset. Signed-off-by:
-
Joe Perches authored
Use the built-in function instead of memset. Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Joe Perches authored
Use the built-in function instead of memset. Signed-off-by:
-
Joe Perches authored
Use the built-in function instead of memset. Signed-off-by:
-
Joe Perches authored
Use the built-in function instead of memset. Signed-off-by:
-
Joe Perches authored
Use the built-in function instead of memset. Signed-off-by:
Ian Campbell <ian.campbell@citrix.com> Acked-by:
Wei Liu <wei.liu2@citrix.com> Signed-off-by:
-
Joe Perches authored
Use the built-in function instead of memset. Miscellanea: Add #include <linux/etherdevice.h> Signed-off-by:
-
Joe Perches authored
Use the built-in function instead of memset. Miscellanea: Add #include <linux/etherdevice.h> where appropriate Use ETH_ALEN instead of 6 Signed-off-by:
-
Joe Perches authored
Use the built-in function instead of memset. Signed-off-by:
-
Joe Perches authored
Use the built-in function instead of memset. Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Greg Rose authored
Module dependencies are broken in the case where CONFIG_I40E=y and CONFIG_CONFIGFS_FS=m. This fixes the broken dependency. Signed-off-by:
Greg Rose <gregory.v.rose@intel.com> Signed-off-by:
-
Eric W. Biederman authored
Before the ax25 stack calls dev_queue_xmit it always calls ax25_type_trans which sets skb->protocol to ETH_P_AX25. Which means that by looking at the protocol type it is possible to detect IP packets that have not been munged by the ax25 stack in ndo_start_xmit and call a function to munge them. Rename ax25_neigh_xmit to ax25_ip_xmit and tweak the return type and value to be appropriate for an ndo_start_xmit function. Update all of the ax25 devices to test the protocol type for ETH_P_IP and return ax25_ip_xmit as the first thing they do. This preserves the existing semantics of IP packet processing, but the timing will be a little different as the IP packets now pass through the qdisc layer before reaching the ax25 ip packet processing. Remove the now unnecessary ax25 neighbour table operations. Signed-off-by:
-
Joe Stringer authored
Set actions consist of a regular OVS_KEY_ATTR_* attribute nested inside of a OVS_ACTION_ATTR_SET action attribute. When converting masked actions back to regular set actions, the inner attribute length was not changed, ie, double the length being serialized. This patch fixes the bug. Fixes: 83d2b9ba ("net: openvswitch: Support masked set actions.") Signed-off-by:
Joe Stringer <joestringer@nicira.com> Acked-by:
Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by:
-
Guenter Roeck authored
Commit 6ce29b0e ("gianfar: Avoid unnecessary reg accesses in adjust_link()") eliminates unnecessary calls to adjust_link for phy devices which don't support interrupts and need polling. As part of that work, the 'new_state' local flag, which was used to reduce logging noise on the console, was eliminated. Unfortunately, that means that a 'Link is Down' log message will now be issued continuously if a link is configured as UP, the link state is down, and the associated phy requires polling. This occurs because priv->oldduplex is -1 in this case, which always differs from phydev->duplex. In addition, phydev->speed may also differ from priv->oldspeed. gfar_update_link_state() is therefore called each time a phy is polled, even if the link state did not change. Cc: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by:
-
Thomas Falcon authored
Add a function that will enable changing the MAC address of an ibmveth interface while it is still running. Signed-off-by:
Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Reviewed-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
Fabian Frederick authored
WAIT_FOR_DEMON code is directly undefined at the beginning of signaling.c since initial git version and thus never compiled. This also removes buggy current->state direct access. Suggested-by:
Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by:
Fabian Frederick <fabf@skynet.be> Signed-off-by:
-
Florian Westphal authored
make build fail if structure no longer fits into ->cb storage. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Linus Torvalds authored
-
Daniel Vetter authored
This is a tricky story of the new atomic state handling and the legacy code fighting over each another. The bug at hand is an underrun of the framebuffer reference with subsequent hilarity caused by the load detect code. Which is peculiar since the the exact same code works fine as the implementation of the legacy setcrtc ioctl. Let's look at the ingredients: - Currently our code is a crazy mix of legacy modeset interfaces to set the parameters and half-baked atomic state tracking underneath. While this transition is going we're using the transitional plane helpers to update the atomic side (drm_plane_helper_disable/update and friends), i.e. plane->state->fb. Since the state structure owns the fb those functions take care of that themselves. The legacy state (specifically crtc->primary->fb) is still managed by the old code (and mostly by the drm core), with the fb reference counting done by callers (core drm for the ioctl or the i915 load detect code). The relevant commit is commit ea2c67bb Author: Matt Roper <matthew.d.roper@intel.com> Date: Tue Dec 23 10:41:52 2014 -0800 drm/i915: Move to atomic plane helpers (v9) - drm_plane_helper_disable has special code to handle multiple calls in a row - it checks plane->crtc == NULL and bails out. This is to match the proper atomic implementation which needs the crtc to get at the implied locking context atomic updates always need. See commit acf24a39 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Jul 29 15:33:05 2014 +0200 drm/plane-helper: transitional atomic plane helpers - The universal plane code split out the implicit primary plane from the CRTC into it's own full-blown drm_plane object. As part of that the setcrtc ioctl (which updated both the crtc mode and primary plane) learned to set crtc->primary->crtc on modeset to make sure the plane->crtc assignments statate up to date in commit e13161af Author: Matt Roper <matthew.d.roper@intel.com> Date: Tue Apr 1 15:22:38 2014 -0700 drm: Add drm_crtc_init_with_planes() (v2) Unfortunately we've forgotten to update the load detect code. Which wasn't a problem since the load detect modeset is temporary and always undone before we drop the locks. - Finally there is a organically grown history (i.e. don't ask) around who sets the legacy plane->fb for the various driver entry points. Originally updating that was the drivers duty, but for almost all places we've moved that (plus updating the refcounts) into the core. Again the exception is the load detect code. Taking all together the following happens: - The load detect code doesn't set crtc->primary->crtc. This is only really an issue on crtcs never before used or when userspace explicitly disabled the primary plane. - The plane helper glue code short-circuits because of that and leaves a non-NULL fb behind in plane->state->fb and plane->fb. The state fb isn't a real problem (it's properly refcounted on its own), it's just the canary. - Load detect code drops the reference for that fb, but doesn't set plane->fb = NULL. This is ok since it's still living in that old world where drivers had to clear the pointer but the core/callers handled the refcounting. - On the next modeset the drm core notices plane->fb and takes care of refcounting it properly by doing another unref. This drops the refcount to zero, leaving state->plane now pointing at freed memory. - intel_plane_duplicate_state still assume it owns a reference to that very state->fb and bad things start to happen. Fix this all by applying the same duct-tape as for the legacy setcrtc ioctl code and set crtc->primary->crtc properly. Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: Rob Clark <robdclark@gmail.com> Cc: Paulo Zanoni <przanoni@gmail.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Matt Roper <matthew.d.roper@intel.com> Reported-and-tested-by:
Linus Torvalds <torvalds@linux-foundation.org> Reported-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Signed-off-by:
-
Sravanthi Tangeda authored
Bump i40e to 1.2.10 and i40evf to 1.2.4 Change-ID: I48aa64df05fcc8356e7026f3a9e69ecf78d0c785 Signed-off-by:
Sravanthi Tangeda <sravanthi.tangeda@intel.com> Signed-off-by:
-
Neerav Parikh authored
In case of MFP mode the driver was returning incorrect number of TCs for partitions that are not enabled for iSCSI. Though the driver does not configure these TCs in the Tx scheduler for the NIC partitions; it does use this map to setup the queue mappings. This patch fixes this and keeps all the NIC partitions to the default PF TC i.e. TC0. Change-ID: Iede214c907e7bac1356e999049b9f642759512b3 Signed-off-by:
Neerav Parikh <neerav.parikh@intel.com> Signed-off-by:
-
Neerav Parikh authored
Allow DCBNL operations in MFP mode to allow query of port DCB settings via all the PFs and register iSCSI APP on iSCSI enabled PF. Change-ID: I34cc39b4665d0a631847d4079350d3814f02381e Signed-off-by:
-
Mitch Williams authored
Add an extra check to make sure that the indirection table pointer is valid before dereferencing it. Change-ID: I698adbf3daff03081d01f489dc95a9f1ad8b12f1 Reported-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Signed-off-by:
-
Anjali Singhai Jain authored
With changes to default number of queue pairs that the interface comes up with from 1 per online CPU to 1 per lan_msix, we need to make sure we recalculate rss_size. We will now recalculate rss_size based on number of queues enabled in the VSI. Without this fix if the max_lan_msix < num_online_cpu we will be coming up with fewer queues but will be populating rss_size based on num_online_cpus. This will result in packets getting silently dropped because RSS LUT has queues that are not enabled. Change-ID: Ifac8796ce1be1758bb0c34f38dbf4a3a76621e76 Signed-off-by:
Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by:
-
Anjali Singhai Jain authored
Since all VSIs don't have the same RSS table size, have one for each VSI instead of having a single define for RSS table size Change-ID: Ic2c7c66e4a389d4b6c8841a707510a9735041f02 Signed-off-by:
-
Anjali Singhai Jain authored
We were missing a few packet types for VXLAN offload. This patch fixes that. Change-ID: I4b23aa0b08e40ed49d0df6c49a5ed9f2009b44ce Signed-off-by:
-
Neerav Parikh authored
This patch fixes an issue where the driver is not flushing out the DCBNL app table for applications that are not present in the local DCBX application configuration TLVs. Change-ID: I1f1ee04c81c145071b2ab15657546eb10b81fadb Signed-off-by:
-
Anjali Singhai Jain authored
For FW < 4.33 DCB should be disabled. Also Autoneg workaround to avoid Rx stall is still needed for FW < 4.33. Change-ID: Iff36ad86be2f597e7701096014d6d094332a9a21 Signed-off-by:
-
Anjali Singhai Jain authored
When running in a single TC mode the HW can be configured to enable more than max RSS qps for the Main VSI. This patch makes it possible to enable as many as num_online_cpus(). ethtool -L can still be used to reconfigure number of qps to a smaller value. Change-ID: I3e2df085276982603d86dfd79477c0ada8d30b8f Signed-off-by:
Shannon Nelson <shannon.nelson@intel.com> Signed-off-by:
-
Mitch Williams authored
Since we now have functionality to enable and disable PF loopback at runtime, don't try to do it automatically. Removing this call also gets rid of a bogus error message when removing the PF module with VFs enabled. Change-ID: Ic38652d8a3b9498d96113bfaa5ea7bad050862e9 Signed-off-by:
-
