- 11 Sep, 2018 12 commits
-
-
Mark Bloch authored
We support only a single action type per flow rule, in case the user passes the same type of flow actions fail the flow creation. Signed-off-by:
Mark Bloch <markb@mellanox.com> Reviewed-by:
Yishai Hadas <yishaih@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Mark Bloch authored
Make the parsing of flow actions more generic so it could be used by mlx5 raw create flow. Signed-off-by:
-
Mark Bloch authored
Use ib_set_flow() when initializing flow related resources. Signed-off-by:
-
Guy Levi authored
Methods sometimes need to get a flexible set of IDRs and not a strict set as can be achieved today by the conventional IDR attribute. Add a new IDRS_ARRAY attribute to the generic uverbs ioctl layer. IDRS_ARRAY points to array of idrs of the same object type and same access rights, only write and read are supported. Signed-off-by:
Guy Levi <guyle@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>`` Signed-off-by:
-
Mark Bloch authored
Any matching rules will be mutated based on the packet reformat context which is attached to that given flow rule. Signed-off-by:
-
Mark Bloch authored
A L3_TUNNEL_TO_L2 decap flow action requires to enable the encap bit on the flow table, enable it if supported. This will allow to attach those flow actions to NIC RX steering. We don't enable if running on a representor. Signed-off-by:
-
Mark Bloch authored
Any matching packet will be stripped of it's VXLAN tunnel, only the inner L2 onward is left. The user will receive the decapsulated packet. Signed-off-by:
-
Mark Bloch authored
If NIC RX flow tables support decap operation, enable it on creation, This allows to perform decapsulation of tunnelled packets by steering rules. If NIC TX flow tables support reformat operation, enable it on creation. We don't enable those capabilities on representors as the E-Switch should handle packet modification (can be configured via TC) and as current hardware can't handle both FDB and NIC flow tables with decap/packet reformat support. Signed-off-by:
-
Mark Bloch authored
When creating a flow steering rule, allow the user to attach a modify header action. Signed-off-by:
-
Mark Bloch authored
Just like ingress steering, allow a user to create steering rules that match egress vport traffic. We expose the same number of priorities as the bypass (NIC RX) steering. Signed-off-by:
-
Chuck Lever authored
Add helpful warning for RDMA consumer implementers. Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
-
Chuck Lever authored
Code audit suggests that the RDMA CM event handler callback function is _always_ invoked in a context that is safe to block. That's important for consumer implementers to know, so document that in the comment before rdma_create_id (where the handler function is set up by the consumer). Signed-off-by:
-
- 06 Sep, 2018 13 commits
-
-
Parav Pandit authored
Even though device->ifindex is assigned before adding the device in the list which is read by netlink flow, it is better to assign rdma device index before publishing the device in the system to users and clients. Signed-off-by:
Parav Pandit <parav@mellanox.com> Reviewed-by:
Daniel Jurgens <danielj@mellanox.com> Signed-off-by:
-
Parav Pandit authored
During register_device() init sequence is, (a) register with rdma cgroup followed by (b) register with sysfs Therefore, unregister_device() sequence should follow the reverse order. Signed-off-by:
-
Leon Romanovsky authored
Lockdep engine handles correctly downgrade of locks and it simply incorrect to disable lockdep checks prior to calling mmu_notifier. Remove lockdep_off and ensure locks correctness. Signed-off-by:
-
Parav Pandit authored
Even though device registration/unregistration and client registration/unregistration is not a performance path, define the client_data_lock as rwlock for code clarity. Signed-off-by:
-
Parav Pandit authored
add_client_context(), ib_unregister_device() and ib_unregister_client() are designed to call from blocking context. There is no need to save and restore last interrupt state when called from such blocking context. Even though this is not a performance path, using the right spin lock API is desired for code clarity. To avoid checkpatch warning while removing flags, sizeof() is used. Signed-off-by:
-
Parav Pandit authored
While unregistering a device, remove the context elements from the list to not have any stale entries. With that any errors/bugs can be checked when device is freed. Signed-off-by:
-
Parav Pandit authored
While traversing client_data_list in following conditions, linked list is only read, no elements of the list are removed. Therefore, use list_for_each_entry(), instead of list_for_each_safe(). Signed-off-by:
-
Parav Pandit authored
While unregistering a client, only context removal should be protected with lock. There is no need to protect a freeing of such context which is already removed from the list. Signed-off-by:
-
Parav Pandit authored
Currently rdma_addr_cancel() is an async operation, which notifies that cancel is done by executing the callback function given during rdma_resolve_ip(). If resolve_ip request is already completed than callback is not executed. Instead, now rdma_resolve_addr() and rdma_addr_cancel() simplified in following ways. 1. rdma_addr_cancel() now a synchronous method. If request was pending, after it is cancelled, no callback is notified. 2. rdma_resolve_addr() and respective addr_handler() callback doesn't need to hold reference to cm_id. Signed-off-by:
-
Parav Pandit authored
While registering a mad agent, a user space can trigger various errors and flood the logs. Therefore, decrease verbosity and rate limit such error messages. While we are at it, use __func__ to print function name. Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
-
Muhammad Sammar authored
It is illegal to change MTU to a value lower than the minimum MTU stated in ethernet spec. In addition to that we need to add 4 bytes for encapsulation header (IPOIB_ENCAP_LEN). Before "ifconfig ib0 mtu 0" command, succeeds while it obviously shouldn't. Signed-off-by:
Muhammad Sammar <muhammads@mellanox.com> Reviewed-by:
Feras Daoud <ferasda@mellanox.com> Signed-off-by:
-
Parav Pandit authored
mdev->state device state is not protected by the QP for which WRs are being processed. Therefore, there is no need to hold spin lock while checking mdev state. Given that device fatal error is unlikely situation, wrap the condition check with unlikely(). Additionally, kernel QP1 is also a kernel ULP for which soft CQEs needs to be generated. Therefore, check for device fatal error before processing QP1 work requests. Fixes: 89ea94a7 ("IB/mlx5: Reset flow support for IB kernel ULPs") Signed-off-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
-
Parav Pandit authored
When requested QP type is not supported for a {device, port}, return the error right away before validating all parameters during mad agent registration time. Signed-off-by:
-
- 05 Sep, 2018 15 commits
-
-
Jason Gunthorpe authored
For dependencies, branch based on rdma.git 'for-rc' of https://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git/ Pull 'uverbs_dev_cleanups' from Leon Romanovsky: ==================== Reuse the char device code interfaces to simplify ib_uverbs_device creation and destruction. As part of this series, we are sending fix to cleanup path, which was discovered during internal review, The fix definitely can go to -rc, but it means that this series will be dependent on rdma-rc. ==================== * branch 'uverbs_dev_cleanups': RDMA/uverbs: Use device.groups to initialize device attributes RDMA/uverbs: Use cdev_device_add() instead of cdev_add() RDMA/core: Depend on device_add() to add device attributes RDMA/uverbs: Fix error cleanup path of ib_uverbs_add_one() Resolved conflict in ib_device_unregister_sysfs() Signed-off-by:
-
Parav Pandit authored
Instead of explicitly adding device attribute files and handling such error conditions, depend on device core layer to create device attributes files based group pointer NULL terminated array. Signed-off-by:
-
Parav Pandit authored
Instead of doing two step process to add char device and create underlying device, use cdev_device_add() which does both. Currently a kobject per uverbs_device is created to keep reference to its holding ib_uverbs_device in addition to its underlying device 'dev'. Instead just use uverbs_device->dev to keep a reference to. With this change there is single reference tracker for ib_uverbs_device structure. This allows for subsequent patch to registers group attribute as well using single API cdev_device_add(). Signed-off-by:
-
Parav Pandit authored
Instead of adding/removing device attribute files, depend on device_add() which considers adding these device files based on NULL terminated attributes group array. Signed-off-by:
-
Parav Pandit authored
If ib_uverbs_create_uapi() fails, dev_num should be freed from the bitmap. Fixes: 7d96c9b1 ("IB/uverbs: Have the core code create the uverbs_root_spec") Signed-off-by:
-
Somnath Kotur authored
1. DMA-able memory allocated for Shadow QP was not being freed. 2. bnxt_qplib_alloc_qp_hdr_buf() had a bug wherein the SQ pointer was erroneously pointing to the RQ. But since the corresponding free_qp_hdr_buf() was correct, memory being free was less than what was allocated. Fixes: 1ac5a404 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Signed-off-by:
Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by:
-
Parav Pandit authored
Reuse existing get_device() API to do it symmetric to already used put_device() in commit 924b8900 ("RDMA/core: Replace open-coded variant of put_device") Signed-off-by:
-
Leon Romanovsky authored
The "closing" variable is used as boolean and set to "true" in one place, update the declaration of that variable and their other assignment to proper type. Fixes: e951747a ("IB/uverbs: Rework the locking for cleaning up the ucontext") Signed-off-by:
-
Leon Romanovsky authored
The pci-core and net-core logic ensure that parameters provided to nes_probe() and nes_netdev_open() are valid, hence the assert print are not possible. Cc: Faisal Latif <faisal.latif@intel.com> Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/infiniband/hw/qedr/verbs.c: In function 'qedr_create_srq': drivers/infiniband/hw/qedr/verbs.c:1450:24: warning: variable 'ctx' set but not used [-Wunused-but-set-variable] Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Rahul Verma <rahul.verma@cavium.com> Signed-off-by:
-
Igor Stoppa authored
WARN_ON() already contains an unlikely(), so it's not necessary to wrap it into another. Signed-off-by:
Igor Stoppa <igor.stoppa@huawei.com> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Jack Morgenstein authored
The upstream kernel commit cited below modified the workqueue in the new CQ API to be bound to a specific CPU (instead of being unbound). This caused ALL users of the new CQ API to use the same bound WQ. Specifically, MAD handling was severely delayed when the CPU bound to the WQ was busy handling (higher priority) interrupts. This caused a delay in the MAD "heartbeat" response handling, which resulted in ports being incorrectly classified as "down". To fix this, add a new "unbound" WQ type to the new CQ API, so that users have the option to choose either a bound WQ or an unbound WQ. For MADs, choose the new "unbound" WQ. Fixes: b7363e67 ("IB/device: Convert ib-comp-wq to be CPU-bound") Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Sagi Grimberg <sagi@grimberg.m> Signed-off-by:
-
Joe Perches authored
Consistently use the "QPLIB: " prefix for dev_<level> logging. Miscellanea: o Add missing newlines to avoid possible message interleaving o Coalesce consecutive dev_<level> uses that emit a message header to avoid < 80 column lengths and mistakenly output on multiple lines o Reflow modified lines to use 80 columns where appropriate o Consistently use "%s: " where __func__ is output o QPLIB: is now always output immediately after the dev_<level> header Signed-off-by:
Joe Perches <joe@perches.com> Acked-by:
Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by:
-
Aaron Knister authored
Inside of start_xmit() the call to check if the connection is up and the queueing of the packets for later transmission is not atomic which leaves a window where cm_rep_handler can run, set the connection up, dequeue pending packets and leave the subsequently queued packets by start_xmit() sitting on neigh->queue until they're dropped when the connection is torn down. This only applies to connected mode. These dropped packets can really upset TCP, for example, and cause multi-minute delays in transmission for open connections. Here's the code in start_xmit where we check to see if the connection is up: if (ipoib_cm_get(neigh)) { if (ipoib_cm_up(neigh)) { ipoib_cm_send(dev, skb, ipoib_cm_get(neigh)); goto unref; } } The race occurs if cm_rep_handler execution occurs after the above connection check (specifically if it gets to the point where it acquires priv->lock to dequeue pending skb's) but before the below code snippet in start_xmit where packets are queued. if (skb_queue_len(&neigh->queue) < IPOIB_MAX_PATH_REC_QUEUE) { push_pseudo_header(skb, phdr->hwaddr); spin_lock_irqsave(&priv->lock, flags); __skb_queue_tail(&neigh->queue, skb); spin_unlock_irqrestore(&priv->lock, flags); } else { ++dev->stats.tx_dropped; dev_kfree_skb_any(skb); } The patch acquires the netif tx lock in cm_rep_handler for the section where it sets the connection up and dequeues and retransmits deferred skb's. Fixes: 839fcaba ("IPoIB: Connected mode experimental support") Cc: stable@vger.kernel.org Signed-off-by:Aaron Knister <aaron.s.knister@nasa.gov> Tested-by:
Ira Weiny <ira.weiny@intel.com> Reviewed-by:
-
Jason Gunthorpe authored
For dependencies, branch based on 'mellanox/mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux.git Pull Flow actions to mutate packets from Leon Romanovsky: ==================== This series exposes the ability to create flow actions which can mutate packet headers. We do that by exposing two new verbs: * modify header - can change existing packet headers. packet * reformat - can encapsulate or decapsulate a packet. Once created a flow action must be attached to a steering rule for it to take effect. The first 10 patches refactor mlx5_core code, rename internal structures to better reflect their operation and export needed functions so the RDMA side can allocate the action. The last 5 patches expose via the IOCTL infrastructure mlx5_ib methods which do the actual allocation of resources and return an handle to the user. A user of this API is expected to know how to work with the device's spec as the input to those function is HW depended. An example usage of the modify header action is routing, A user can create an action which edits the L2 header and decrease the TTL. An example usage of the packet reformat action is VXLAN encap/decap which is done by the HW. ==================== * branch 'mlx5-flow-mutate': RDMA/mlx5: Extend packet reformat verbs RDMA/mlx5: Add new flow action verb - packet reformat RDMA/uverbs: Add generic function to fill in flow action object RDMA/mlx5: Add a new flow action verb - modify header RDMA/uverbs: Add UVERBS_ATTR_CONST_IN to the specs language net/mlx5: Export packet reformat alloc/dealloc functions net/mlx5: Pass a namespace for packet reformat ID allocation net/mlx5: Expose new packet reformat capabilities {net, RDMA}/mlx5: Rename encap to reformat packet net/mlx5: Move header encap type to IFC header file net/mlx5: Break encap/decap into two separated flow table creation flags net/mlx5: Add support for more namespaces when allocating modify header net/mlx5: Export modify header alloc/dealloc functions net/mlx5: Add proper NIC TX steering flow tables support net/mlx5: Cleanup flow namespace getter switch logic Signed-off-by:
-
