- 05 Aug, 2015 26 commits
-
-
Dexuan Cui authored
By default lsvmbus lists all the devices in the VMBus. With -v or -vv, more information is printed, including the VMBus Rel_ID, class ID, device ID and which channel is bound to which virtual processor, etc. Signed-off-by:
Dexuan Cui <decui@microsoft.com> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dexuan Cui authored
This is useful to analyze performance issue. Signed-off-by:
-
K. Y. Srinivasan authored
The current Hyper-V clock source is based on the per-partition reference counter and this counter is being accessed via s synthetic MSR - HV_X64_MSR_TIME_REF_COUNT. Hyper-V has a more efficient way of computing the per-partition reference counter value that does not involve reading a synthetic MSR. We implement a time source based on this mechanism. Tested-by:
Vivek Yadav <vyadav@microsoft.com> Signed-off-by:
-
Viresh Kumar authored
Migrate hv driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: devel@linuxdriverproject.org Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
-
Christopher Oo authored
Fixes a bug where previously hv_ringbuffer_read would pass in the old number of bytes available to read instead of the expected old read index when calculating when to signal to the host that the ringbuffer is empty. Since the previous write size is already saved, also changes the hv_need_to_signal_on_read to use the previously read value rather than recalculating it. Signed-off-by:
Christopher Oo <t-chriso@microsoft.com> Signed-off-by:
-
Dexuan Cui authored
Keep track of CPU affiliations of sub-channels within the scope of the primary channel. This will allow us to better distribute the load amongst available CPUs. Signed-off-by:
-
K. Y. Srinivasan authored
The current code tracks the assigned CPUs within a NUMA node in the context of the primary channel. So, if we have a VM with a single NUMA node with 8 VCPUs, we may end up unevenly distributing the channel load. Fix the issue by tracking affiliations globally. Signed-off-by:
-
Jake Oshins authored
This patch deletes the logic from hyperv_fb which picked a range of MMIO space for the frame buffer and adds new logic to hv_vmbus which picks ranges for child drivers. The new logic isn't quite the same as the old, as it considers more possible ranges. Signed-off-by:
Jake Oshins <jakeo@microsoft.com> Signed-off-by:
-
Jake Oshins authored
This patch changes the logic in hv_vmbus to record all of the ranges in the VM's firmware (BIOS or UEFI) that offer regions of memory-mapped I/O space for use by paravirtual front-end drivers. The old logic just found one range above 4GB and called it good. This logic will find any ranges above 1MB. It would have been possible with this patch to just use existing resource allocation functions, rather than keep track of the entire set of Hyper-V related MMIO regions in VMBus. This strategy, however, is not sufficient when the resource allocator needs to be aware of the constraints of a Hyper-V virtual machine, which is what happens in the next patch in the series. So this first patch exists to show the first steps in reworking the MMIO allocation paths for Hyper-V front-end drivers. Signed-off-by:
-
Greg Kroah-Hartman authored
With well over 200+ users of this api, there are a mere 12 users that actually checked the return value of this function. And all of them really didn't do anything with that information as the system or module was shutting down no matter what. So stop pretending like it matters, and just return void from misc_deregister(). If something goes wrong in the call, you will get a WARNING splat in the syslog so you know how to fix up your driver. Other than that, there's nothing that can go wrong. Cc: Alasdair Kergon <agk@redhat.com> Cc: Neil Brown <neilb@suse.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Christine Caulfield <ccaulfie@redhat.com> Cc: David Teigland <teigland@redhat.com> Cc: Mark Fasheh <mfasheh@suse.com> Acked-by:
Joel Becker <jlbec@evilplan.org> Acked-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by:
Alessandro Zummo <a.zummo@towertech.it> Acked-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
K. Y. Srinivasan authored
We cycle through all the "high performance" channels to distribute load across the available CPUs. Process the NetworkDirect as a high performance device. Signed-off-by:
-
Denis V. Lunev authored
Hypervisor Top Level Functional Specification v3.1/4.0 notes that cpuid (0x40000003) EDX's 10th bit should be used to check that Hyper-V guest crash MSR's functionality available. This patch should fix this recognition. Currently the code checks EAX register instead of EDX. Signed-off-by:
Andrey Smetanin <asmetanin@virtuozzo.com> Signed-off-by:
Denis V. Lunev <den@openvz.org> Signed-off-by:
-
Vitaly Kuznetsov authored
Pre-Win2012R2 hosts don't properly handle CHANNELMSG_UNLOAD and wait_for_completion() hangs. Avoid sending such request on old hosts. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
-
Nik Nyby authored
This fixes a typo: base_flag_bumber to base_flag_number Signed-off-by:
Nik Nyby <nikolas@gnu.org> Signed-off-by:
-
Dan Carpenter authored
We don't catch this allocation failure because there is a typo and we check the wrong variable. Fixes: 14b50f80 ('Drivers: hv: util: introduce hv_utils_transport abstraction') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
K. Y. Srinivasan authored
The guest may have to send a completion packet back to the host. To support this usage, permit sending a packet without a payload - we would be only sending the descriptor in this case. Signed-off-by:
-
Alex Ng authored
Support Win10 protocol for Dynamic Memory. Thia patch allows guests on Win10 hosts to hot-add memory even when dynamic memory is not enabled on the guest. Signed-off-by:
Alex Ng <alexng@microsoft.com> Signed-off-by:
-
Vitaly Kuznetsov authored
struct hv_start_fcopy is too big to be on stack on i386, the following warning is reported: >> drivers/hv/hv_fcopy.c:159:1: warning: the frame size of 1088 bytes is larger than 1024 bytes [-Wframe-larger-than=] Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
-
Vitaly Kuznetsov authored
kzalloc() return value check was accidentally lost in 11bc3a5f: "Drivers: hv: kvp: convert to hv_utils_transport" commit. We don't need to reset kvp_transaction.state here as we have the kvp_timeout_func() timeout function and in case we're in OOM situation it is preferable to wait. Reported-by:
-
Vitaly Kuznetsov authored
current_pt_regs() sometimes returns regs of the userspace process and in case of a kernel crash this is not what we need to report. E.g. when we trigger crash with sysrq we see the following: ... RIP: 0010:[<ffffffff815b8696>] [<ffffffff815b8696>] sysrq_handle_crash+0x16/0x20 RSP: 0018:ffff8800db0a7d88 EFLAGS: 00010246 RAX: 000000000000000f RBX: ffffffff820a0660 RCX: 0000000000000000 ... at the same time current_pt_regs() give us: ip=7f899ea7e9e0, ax=ffffffffffffffda, bx=26c81a0, cx=7f899ea7e9e0, ... These registers come from the userspace process triggered the crash. As we don't even know which process it was this information is rather useless. When kernel crash happens through 'die' proper regs are being passed to all receivers on the die_chain (and panic_notifier_list is being notified with the string passed to panic() only). If panic() is called manually (e.g. on BUG()) we won't get 'die' notification so keep the 'panic' notification reporter as well but guard against double reporting. Signed-off-by:
-
Vitaly Kuznetsov authored
Full kernel hang is observed when kdump kernel starts after a crash. This hang happens in vmbus_negotiate_version() function on wait_for_completion() as Hyper-V host (Win2012R2 in my testing) never responds to CHANNELMSG_INITIATE_CONTACT as it thinks the connection is already established. We need to perform some mandatory minimalistic cleanup before we start new kernel. Reported-by:
-
Vitaly Kuznetsov authored
At the very late stage of kexec a driver (which are not being unloaded) can try to post a message or signal an event. This will crash the kernel as we already did hv_cleanup() and the hypercall page is NULL. Move all common (between 32 and 64 bit code) declarations to the beginning of the do_hypercall() function. Unfortunately we have to write the !hypercall_page check twice to not mix declarations and code. Signed-off-by:
-
Vitaly Kuznetsov authored
When general-purpose kexec (not kdump) is being performed in Hyper-V guest the newly booted kernel fails with an MCE error coming from the host. It is the same error which was fixed in the "Drivers: hv: vmbus: Implement the protocol for tearing down vmbus state" commit - monitor pages remain special and when they're being written to (as the new kernel doesn't know these pages are special) bad things happen. We need to perform some minimalistic cleanup before booting a new kernel on kexec. To do so we need to register a special machine_ops.shutdown handler to be executed before the native_machine_shutdown(). Registering a shutdown notification handler via the register_reboot_notifier() call is not sufficient as it happens to early for our purposes. machine_ops is not being exported to modules (and I don't think we want to export it) so let's do this in mshyperv.c The minimalistic cleanup consists of cleaning up clockevents, synic MSRs, guest os id MSR, and hypercall MSR. Kdump doesn't require all this stuff as it lives in a separate memory space. Signed-off-by:
-
Vitaly Kuznetsov authored
If some piece of code wants to check kexec_in_progress it has to be put in #ifdef CONFIG_KEXEC block to not break the build in !CONFIG_KEXEC case. Overcome this limitation by defining kexec_in_progress to false. Signed-off-by:
-
Vitaly Kuznetsov authored
We already have hv_synic_free() which frees all per-cpu pages for all CPUs, let's remove the hv_synic_free_cpu() call from hv_synic_cleanup() so it will be possible to do separate cleanup (writing to MSRs) and final freeing. This is going to be used to assist kexec. Signed-off-by:
-
Tomas Winkler authored
Remove bogus check on pm_runtime_active that prevented disconnection from a client in case the device was resuming from power gating but not yet active. Fix regression introduced by 18901357 mei: disconnect on connection request timeout Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
-
- 04 Aug, 2015 14 commits
-
-
Tomas Winkler authored
HBM 2.0 version for Sunrise point Skylake (PCH) based devices Signed-off-by:
-
Tomas Winkler authored
Add MEI devices ids for Intel Sunrisepoint Skylake (PCH) Signed-off-by:
-
Alexander Usyskin authored
A BIOS may put the device in d0i3 on platform initialization so it won’t consume power even if the driver is not present, in turn the driver has to wake up the devices on load in order to perform the initialization sequence and move it back to low power state on driver remove. Signed-off-by:
-
Alexander Usyskin authored
Move mei_me_hw_reset down in the source file to avoid forward declarations when introducing d0i3 flow in the next patch. Signed-off-by:
-
Alexander Usyskin authored
Rework mei power gating state machine to support entry and exit to and from D0i3 power state. The choice between legacy and D0i3 routines is conditioned on d0i3_supported flag. The patch introduces warning: drivers/misc/mei/hw-me.c:901:12: warning: ‘mei_me_d0i3_enter’ defined but not used [-Wunused-function] it will go away in consequent patch Signed-off-by:
-
Alexander Usyskin authored
Before adding support for D0i3 we need to reorganize the hbm pg handling Move HBM PG response code to dedicated functions in order to unclutter hbm command switch. Add check for the right system state before message processing and return -EPROTO in state mismatch case. Signed-off-by:
-
Alexander Usyskin authored
D0i3 adds additional interrupt reason bit, therefore we add a variable intr_source to save the interrupt causes for further dispatching. The interrupt cause is saved in the irq quick handler to achieve unified behavior for both MSI enabled and shared interrupt platforms. Signed-off-by:
-
Alexander Usyskin authored
Detect d0i3 low power state during hw configuration, the value is set in HFS_1 pci config reigister. Signed-off-by:
-
Tomas Winkler authored
Starting with Intel Sunrisepoint (Skylake PCH) the MEI device supports D0i3 low power state. Add D0i3 control registers. Signed-off-by:
-
Alexander Usyskin authored
The device can return error 5 (NOT_ALLOWED) on connection attempt. This error can happen if: 1. An another connection attempt is in progress 2. There is an attempt to connect a fixed (connectionless) client 3. The number of available connections is exceeded (new in HBM 2.0) We should not hit that error unless there is an internal book keeping hiccup except option (3), therefore we translate the error code to errno EBUSY; Signed-off-by:
-
Alexander Usyskin authored
Enable drivers on mei client bus to subscribe to asynchronous event notifications. Introduce events_mask to the existing callback infrastructure so it is possible to handle both RX and event notification. Signed-off-by:
-
Tomas Winkler authored
A process can be informed about client notification also via SIGIO with POLL_PRI event. Signed-off-by:
-
Tomas Winkler authored
Polling on priority events is translated on waiting for event notification. One need to enable notification prior for calling select or poll system call otherwise process will not wait. Signed-off-by:
-
Tomas Winkler authored
Add ioctl IOCTL_MEI_NOTIFY_SET for enabling and disabling async event notification. Add ioctl IOCTL_MEI_NOTIFY_GET for receiving and acking an event notification. Signed-off-by:
-
