- 30 Apr, 2015 40 commits
-
-
Geoff Levand authored
commit 286fb1cc upstream. Some of the macros defined in kvm_arm.h are useful in assembly files, but are not compatible with the assembler. Change any C language integer constant definitions using appended U, UL, or ULL to the UL() preprocessor macro. Also, add a preprocessor include of the asm/memory.h file which defines the UL() macro. Fixes build errors like these when using kvm_arm.h in assembly source files: Error: unexpected characters following instruction at operand 3 -- `and x0,x1,#((1U<<25)-1)' Acked-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Geoff Levand <geoff@infradead.org> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by:
Jiri Slaby <jslaby@suse.cz>
-
Steve Capper authored
commit 3d08c629 upstream. Commit: b8865767 ARM: KVM: user_mem_abort: support stage 2 MMIO page mapping introduced some code in user_mem_abort that failed to compile if STRICT_MM_TYPECHECKS was enabled. This patch fixes up the failing comparison. Signed-off-by:
Steve Capper <steve.capper@linaro.org> Reviewed-by:
Kim Phillips <kim.phillips@linaro.org> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
-
Christoffer Dall authored
commit c3058d5d upstream. When creating or moving a memslot, make sure the IPA space is within the addressable range of the guest. Otherwise, user space can create too large a memslot and KVM would try to access potentially unallocated page table entries when inserting entries in the Stage-2 page tables. Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Vladimir Murzin authored
commit 37a34ac1 upstream. On some platforms with no power management capabilities, the hotplug implementation is allowed to return from a smp_ops.cpu_die() call as a function return. Upon a CPU onlining event, the KVM CPU notifier tries to reinstall the hyp stub, which fails on platform where no reset took place following a hotplug event, with the message: CPU1: smp_ops.cpu_die() returned, trying to resuscitate CPU1: Booted secondary processor Kernel panic - not syncing: unexpected prefetch abort in Hyp mode at: 0x80409540 unexpected data abort in Hyp mode at: 0x80401fe8 unexpected HVC/SVC trap in Hyp mode at: 0x805c6170 since KVM code is trying to reinstall the stub on a system where it is already configured. To prevent this issue, this patch adds a check in the KVM hotplug notifier that detects if the HYP stub really needs re-installing when a CPU is onlined and skips the installation call if the stub is already in place, which means that the CPU has not been reset. Signed-off-by:
Vladimir Murzin <vladimir.murzin@arm.com> Acked-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by:
-
Joel Schopp authored
commit dbff124e upstream. The current aarch64 calculation for VTTBR_BADDR_MASK masks only 39 bits and not all the bits in the PA range. This is clearly a bug that manifests itself on systems that allocate memory in the higher address space range. [ Modified from Joel's original patch to be based on PHYS_MASK_SHIFT instead of a hard-coded value and to move the alignment check of the allocation to mmu.c. Also added a comment explaining why we hardcode the IPA range and changed the stage-2 pgd allocation to be based on the 40 bit IPA range instead of the maximum possible 48 bit PA range. - Christoffer ] Reviewed-by:
Joel Schopp <joel.schopp@amd.com> Signed-off-by:
-
Marc Zyngier authored
commit 71afaba4 upstream. As it stands, nothing prevents userspace from injecting an interrupt before the guest's GIC is actually initialized. This goes unnoticed so far (as everything is pretty much statically allocated), but ends up exploding in a spectacular way once we switch to a more dynamic allocation (the GIC data structure isn't there yet). The fix is to test for the "ready" flag in the VGIC distributor before trying to inject the interrupt. Note that in order to avoid breaking userspace, we have to ignore what is essentially an error. Signed-off-by:
-
Ard Biesheuvel authored
commit a7d079ce upstream. The ISS encoding for an exception from a Data Abort has a WnR bit[6] that indicates whether the Data Abort was caused by a read or a write instruction. While there are several fields in the encoding that are only valid if the ISV bit[24] is set, WnR is not one of them, so we can read it unconditionally. Instead of fixing both implementations of kvm_is_write_fault() in place, reimplement it just once using kvm_vcpu_dabt_iswrite(), which already does the right thing with respect to the WnR bit. Also fix up the callers to pass 'vcpu' Acked-by:
Laszlo Ersek <lersek@redhat.com> Acked-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
-
Christoffer Dall authored
commit 05e0127f upstream. The architecture specifies that when the processor wakes up from a WFE or WFI instruction, the instruction is considered complete, however we currrently return to EL1 (or EL0) at the WFI/WFE instruction itself. While most guests may not be affected by this because their local exception handler performs an exception returning setting the event bit or with an interrupt pending, some guests like UEFI will get wedged due this little mishap. Simply skip the instruction when we have completed the emulation. Cc: <stable@vger.kernel.org> Acked-by:
-
Pranavkumar Sawargaonkar authored
commit f6edbbf3 upstream. X-Gene u-boot runs in EL2 mode with MMU enabled hence we might have stale EL2 tlb enteris when we enable EL2 MMU on each host CPU. This can happen on any ARM/ARM64 board running bootloader in Hyp-mode (or EL2-mode) with MMU enabled. This patch ensures that we flush all Hyp-mode (or EL2-mode) TLBs on each host CPU before enabling Hyp-mode (or EL2-mode) MMU. Cc: <stable@vger.kernel.org> Tested-by:
Pranavkumar Sawargaonkar <pranavkumar@linaro.org> Signed-off-by:
Anup Patel <anup.patel@linaro.org> Signed-off-by:
-
Will Deacon authored
commit 1fa451bc upstream. vgic_ioaddr_overlap claims to return a bool, but in reality it returns an int. Shut sparse up by fixing the type signature. Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Will Deacon authored
commit 18d45766 upstream. is_valid_cache returns true if the specified cache is valid. Unfortunately, if the parameter passed it out of range, we return -ENOENT, which ends up as true leading to potential hilarity. This patch returns false on the failure path instead. Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Will Deacon authored
commit 4000be42 upstream. Running sparse results in a bunch of noisy address space mismatches thanks to the broken __percpu annotation on kvm_get_running_vcpus. This function returns a pcpu pointer to a pointer, not a pointer to a pcpu pointer. This patch fixes the annotation, which kills the warnings from sparse. Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Will Deacon authored
commit 6951e48b upstream. Sparse kicks up about a type mismatch for kvm_target_cpu: arch/arm64/kvm/guest.c:271:25: error: symbol 'kvm_target_cpu' redeclared with different type (originally declared at ./arch/arm64/include/asm/kvm_host.h:45) - different modifiers so fix this by adding the missing const attribute to the function declaration. Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Victor Kamensky authored
commit ba083d20 upstream. esr_el2 field of struct kvm_vcpu_fault_info has u32 type. It should be stored as word. Current code works in LE case because existing puts least significant word of x1 into esr_el2, and it puts most significant work of x1 into next field, which accidentally is OK because it is updated again by next instruction. But existing code breaks in BE case. Signed-off-by:
Victor Kamensky <victor.kamensky@linaro.org> Acked-by:
-
Li Liu authored
commit af92394e upstream. HSCTLR.EE is defined as bit[25] referring to arm manual DDI0606C.b(p1590). Reviewed-by:
Li Liu <john.liuli@huawei.com> Signed-off-by:
-
Alex Bennée authored
commit efd48cea upstream. I suspect this is a -ECUTPASTE fault from the initial implementation. If we don't declare the register ID to be KVM_REG_ARM64 the KVM_GET_ONE_REG implementation kvm_arm_get_reg() returns -EINVAL and hilarity ensues. The kvm/api.txt document describes all arm64 registers as starting with 0x60xx... (i.e KVM_REG_ARM64). Signed-off-by:
Alex Bennée <alex.bennee@linaro.org> Acked-by:
-
Kim Phillips authored
commit b8865767 upstream. A userspace process can map device MMIO memory via VFIO or /dev/mem, e.g., for platform device passthrough support in QEMU. During early development, we found the PAGE_S2 memory type being used for MMIO mappings. This patch corrects that by using the more strongly ordered memory type for device MMIO mappings: PAGE_S2_DEVICE. Signed-off-by:
-
Eric Auger authored
commit df6ce24f upstream. Currently when a KVM region is deleted or moved after KVM_SET_USER_MEMORY_REGION ioctl, the corresponding intermediate physical memory is not unmapped. This patch corrects this and unmaps the region's IPA range in kvm_arch_commit_memory_region using unmap_stage2_range. Signed-off-by:
Eric Auger <eric.auger@linaro.org> Signed-off-by:
-
Christoffer Dall authored
commit 4f853a71 upstream. unmap_range() was utterly broken, to quote Marc, and broke in all sorts of situations. It was also quite complicated to follow and didn't follow the usual scheme of having a separate iterating function for each level of page tables. Address this by refactoring the code and introduce a pgd_clear() function. Reviewed-by:
Jungseok Lee <jays.lee@samsung.com> Reviewed-by:
Mario Smarduch <m.smarduch@samsung.com> Acked-by:
-
Will Deacon authored
commit 63afbe7a upstream. If the physical address of GICV isn't page-aligned, then we end up creating a stage-2 mapping of the page containing it, which causes us to map neighbouring memory locations directly into the guest. As an example, consider a platform with GICV at physical 0x2c02f000 running a 64k-page host kernel. If qemu maps this into the guest at 0x80010000, then guest physical addresses 0x80010000 - 0x8001efff will map host physical region 0x2c020000 - 0x2c02efff. Accesses to these physical regions may cause UNPREDICTABLE behaviour, for example, on the Juno platform this will cause an SError exception to EL3, which brings down the entire physical CPU resulting in RCU stalls / HYP panics / host crashing / wasted weeks of debugging. SBSA recommends that systems alias the 4k GICV across the bounding 64k region, in which case GICV physical could be described as 0x2c020000 in the above scenario. This patch fixes the problem by failing the vgic probe if the physical base address or the size of GICV aren't page-aligned. Note that this generated a warning in dmesg about freeing enabled IRQs, so I had to move the IRQ enabling later in the probe. Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Joel Schopp <joel.schopp@amd.com> Cc: Don Dutile <ddutile@redhat.com> Acked-by:
Peter Maydell <peter.maydell@linaro.org> Acked-by:
-
Will Deacon authored
commit ee9e101c upstream. In order to ensure completion of inner-shareable maintenance instructions (cache and TLB) on AArch64, we can use the -ish suffix to the dsb instruction. This patch relaxes our dsb sy instructions to dsb ish where possible. Acked-by:
-
Haibin Wang authored
commit 30c21170 upstream. Currently below check in vgic_ioaddr_overlap will always succeed, because the vgic dist base and vgic cpu base are still kept UNDEF after initialization. The code as follows will be return forever. if (IS_VGIC_ADDR_UNDEF(dist) || IS_VGIC_ADDR_UNDEF(cpu)) return 0; So, before invoking the vgic_ioaddr_overlap, it needs to set the corresponding base address firstly. Signed-off-by:
Haibin Wang <wanghaibin.wang@huawei.com> Acked-by:
-
Andre Przywara authored
commit f2ae85b2 upstream. Since KVM internally represents the ICFGR registers by stuffing two of them into one word, the offset for accessing the internal representation and the one for the MMIO based access are different. So keep the original offset around, but adjust the internal array offset by one bit. Reported-by:
Andre Przywara <andre.przywara@arm.com> Signed-off-by:
-
Will Deacon authored
commit 4e4468fa upstream. KVM currently crashes and burns on big-endian hosts, so don't allow it to be selected until we've got that fixed. Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Marc Zyngier authored
commit 6cbde825 upstream. Add a stub for kvm_vgic_addr when compiling without CONFIG_KVM_ARM_VGIC. The usefulness of this configurarion is extremely doubtful, but let's fix it anyway (until we decide that we'll always support a VGIC). Reported-by:
Michele Paolino <m.paolino@virtualopensystems.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Marc Zyngier authored
commit 8034699a upstream. In order to be able to detect the point where the guest enables its MMU and caches, trap all the VM related system registers. Once we see the guest enabling both the MMU and the caches, we can go back to a saner mode of operation, which is to leave these registers in complete control of the guest. Signed-off-by:
-
Marc Zyngier authored
commit af20814e upstream. HCR.TVM traps (among other things) accesses to AMAIR0 and AMAIR1. In order to minimise the amount of surprise a guest could generate by trying to access these registers with caches off, add them to the list of registers we switch/handle. Signed-off-by:
-
Marc Zyngier authored
commit ac30a11e upstream. So far, KVM/ARM used a fixed HCR configuration per guest, except for the VI/VF/VA bits to control the interrupt in absence of VGIC. With the upcoming need to dynamically reconfigure trapping, it becomes necessary to allow the HCR to be changed on a per-vcpu basis. The fix here is to mimic what KVM/arm64 already does: a per vcpu HCR field, initialized at setup time. Signed-off-by:
-
Marc Zyngier authored
commit 547f7813 upstream. Commit 240e99cb (ARM: KVM: Fix 64-bit coprocessor handling) added an ordering dependency for the 64bit registers. The order described is: CRn, CRm, Op1, Op2, 64bit-first. Unfortunately, the implementation is: CRn, 64bit-first, CRm... Move the 64bit test to be last in order to match the documentation. Signed-off-by:
-
Marc Zyngier authored
commit 46c214dd upstream. Commit 240e99cb (ARM: KVM: Fix 64-bit coprocessor handling) changed the way we match the 64bit coprocessor access from user space, but didn't update the trap handler for the same set of registers. The effect is that a trapped 64bit access is never matched, leading to a fault being injected into the guest. This went unnoticed as we didn't really trap any 64bit register so far. Placing the CRm field of the access into the CRn field of the matching structure fixes the problem. Also update the debug feature to emit the expected string in case of failing match. Signed-off-by:
-
Marc Zyngier authored
commit 15979300 upstream. In order for a guest with caches disabled to observe data written contained in a given page, we need to make sure that page is committed to memory, and not just hanging in the cache (as guest accesses are completely bypassing the cache until it decides to enable it). For this purpose, hook into the coherent_cache_guest_page function and flush the region if the guest SCTLR register doesn't show the MMU and caches as being enabled. Signed-off-by:
-
Marc Zyngier authored
commit 9d218a1f upstream. When the guest runs with caches disabled (like in an early boot sequence, for example), all the writes are diectly going to RAM, bypassing the caches altogether. Once the MMU and caches are enabled, whatever sits in the cache becomes suddenly visible, which isn't what the guest expects. A way to avoid this potential disaster is to invalidate the cache when the MMU is being turned on. For this, we hook into the SCTLR_EL1 trapping code, and scan the stage-2 page tables, invalidating the pages/sections that have already been mapped in. Signed-off-by:
-
Marc Zyngier authored
commit a3c8bd31 upstream. The use of p*d_addr_end with stage-2 translation is slightly dodgy, as the IPA is 40bits, while all the p*d_addr_end helpers are taking an unsigned long (arm64 is fine with that as unligned long is 64bit). The fix is to introduce 64bit clean versions of the same helpers, and use them in the stage-2 page table code. Signed-off-by:
-
Marc Zyngier authored
commit 4d44923b upstream. In order to be able to detect the point where the guest enables its MMU and caches, trap all the VM related system registers. Once we see the guest enabling both the MMU and the caches, we can go back to a saner mode of operation, which is to leave these registers in complete control of the guest. Signed-off-by:
-
Marc Zyngier authored
commit 2072d29c upstream. The current handling of AArch32 trapping is slightly less than perfect, as it is not possible (from a handler point of view) to distinguish it from an AArch64 access, nor to tell a 32bit from a 64bit access either. Fix this by introducing two additional flags: - is_aarch32: true if the access was made in AArch32 mode - is_32bit: true if is_aarch32 == true and a MCR/MRC instruction was used to perform the access (as opposed to MCRR/MRRC). This allows a handler to cover all the possible conditions in which a system register gets trapped. Signed-off-by:
-
Marc Zyngier authored
commit 2d58b733 upstream. In order for the guest with caches off to observe data written contained in a given page, we need to make sure that page is committed to memory, and not just hanging in the cache (as guest accesses are completely bypassing the cache until it decides to enable it). For this purpose, hook into the coherent_icache_guest_page function and flush the region if the guest SCTLR_EL1 register doesn't show the MMU and caches as being enabled. The function also get renamed to coherent_cache_guest_page. Signed-off-by:
-
Marc Zyngier authored
commit b20c9f29 upstream. Commit 1fcf7ce0 (arm: kvm: implement CPU PM notifier) added support for CPU power-management, using a cpu_notifier to re-init KVM on a CPU that entered CPU idle. The code assumed that a CPU entering idle would actually be powered off, loosing its state entierely, and would then need to be reinitialized. It turns out that this is not always the case, and some HW performs CPU PM without actually killing the core. In this case, we try to reinitialize KVM while it is still live. It ends up badly, as reported by Andre Przywara (using a Calxeda Midway): [ 3.663897] Kernel panic - not syncing: unexpected prefetch abort in Hyp mode at: 0x685760 [ 3.663897] unexpected data abort in Hyp mode at: 0xc067d150 [ 3.663897] unexpected HVC/SVC trap in Hyp mode at: 0xc0901dd0 The trick here is to detect if we've been through a full re-init or not by looking at HVBAR (VBAR_EL2 on arm64). This involves implementing the backend for __hyp_get_vectors in the main KVM HYP code (rather small), and checking the return value against the default one when the CPU notifier is called on CPU_PM_EXIT. Reported-by:
Andre Przywara <osp@andrep.de> Tested-by:
-
Lorenzo Pieralisi authored
commit 1fcf7ce0 upstream. Upon CPU shutdown and consequent warm-reboot, the hypervisor CPU state must be re-initialized. This patch implements a CPU PM notifier that upon warm-boot calls a KVM hook to reinitialize properly the hypervisor state so that the CPU can be safely resumed. Acked-by:
-
Sachin Kamat authored
commit 61466710 upstream. trace.h was included twice. Remove duplicate inclusion. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
-
Christoffer Dall authored
commit 478a8237 upstream. The current KVM implementation of PSCI returns INVALID_PARAMETERS if the waitqueue for the corresponding CPU is not active. This does not seem correct, since KVM should not care what the specific thread is doing, for example, user space may not have called KVM_RUN on this VCPU yet or the thread may be busy looping to user space because it received a signal; this is really up to the user space implementation. Instead we should check specifically that the CPU is marked as being turned off, regardless of the VCPU thread state, and if it is, we shall simply clear the pause flag on the CPU and wake up the thread if it happens to be blocked for us. Further, the implementation seems to be racy when executing multiple VCPU threads. There really isn't a reasonable user space programming scheme to ensure all secondary CPUs have reached kvm_vcpu_first_run_init before turning on the boot CPU. Therefore, set the pause flag on the vcpu at VCPU init time (which can reasonably be expected to be completed for all CPUs by user space before running any VCPUs) and clear both this flag and the feature (in case the feature can somehow get set again in the future) and ping the waitqueue on turning on a VCPU using PSCI. Reported-by:
-
