There is not strict need to group a comment and a single statement in an
if block, as comments are stripped by the pre-processor.  However,
adding curly braces does make the code easier to read, and may avoid
mistakes when changing the code later.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

A device may have specific HW constraints that must be obeyed to, before
its corresponding PM domain (genpd) can be powered off - and vice verse at
power on. These constraints can't be managed through the regular runtime PM
based deployment for a device, because the access pattern for it, isn't
always request based. In other words, using the runtime PM callbacks to
deal with the constraints doesn't work for these cases.

For these reasons, let's instead add a PM domain power on/off notification
mechanism to genpd. To add/remove a notifier for a device, the device must
already have been attached to the genpd, which also means that it needs to
be a part of the PM domain topology.

To add/remove a notifier, let's introduce two genpd specific functions:
 - dev_pm_genpd_add|remove_notifier()

Note that, to further clarify when genpd power on/off notifiers may be
used, one can compare with the existing CPU_CLUSTER_PM_ENTER|EXIT
notifiers. In the long run, the genpd power on/off notifiers should be able
to replace them, but that requires additional genpd based platform support
for the current users.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull PNP updates from Rafael Wysocki:
 "These clean the PNP code somewhat:

   - Remove the now unused pnp_find_card() function (Christoph Hellwig)

   - Drop duplicate pci.h include from the quirks code and add an
     "internal.h" include to acpi_pnp.c to fix a compiler warning (Tian
     Tao)"

* tag 'pnp-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PNP: remove the now unused pnp_find_card() function
  PNP: ACPI: Fix missing-prototypes in acpi_pnp.c
  PNP: quirks: Fix duplicate included pci.h

Pull ACPI updates from Rafael Wysocki:
 "These add support for generic initiator-only proximity domains to the
  ACPI NUMA code and the architectures using it, clean up some
  non-ACPICA code referring to debug facilities from ACPICA, reduce the
  overhead related to accessing GPE registers, add a new DPTF (Dynamic
  Power and Thermal Framework) participant driver, update the ACPICA
  code in the kernel to upstream revision 20200925, add a new ACPI
  backlight whitelist entry, fix a few assorted issues and clean up some
  code.

  Specifics:

   - Add support for generic initiator-only proximity domains to the
     ACPI NUMA code and the architectures using it (Jonathan Cameron)

   - Clean up some non-ACPICA code referring to debug facilities from
     ACPICA that are not actually used in there (Hanjun Guo)

   - Add new DPTF driver for the PCH FIVR participant (Srinivas
     Pandruvada)

   - Reduce overhead related to accessing GPE registers in ACPICA and
     the OS interface layer and make it possible to access GPE registers
     using logical addresses if they are memory-mapped (Rafael Wysocki)

   - Update the ACPICA code in the kernel to upstream revision 20200925
     including changes as follows:
      + Add predefined names from the SMBus sepcification (Bob Moore)
      + Update acpi_help UUID list (Bob Moore)
      + Return exceptions for string-to-integer conversions in iASL (Bob
        Moore)
      + Add a new "ALL <NameSeg>" debugger command (Bob Moore)
      + Add support for 64 bit risc-v compilation (Colin Ian King)
      + Do assorted cleanups (Bob Moore, Colin Ian King, Randy Dunlap)

   - Add new ACPI backlight whitelist entry for HP 635 Notebook (Alex
     Hung)

   - Move TPS68470 OpRegion driver to drivers/acpi/pmic/ and split out
     Kconfig and Makefile specific for ACPI PMIC (Andy Shevchenko)

   - Clean up the ACPI SoC driver for AMD SoCs (Hanjun Guo)

   - Add missing config_item_put() to fix refcount leak (Hanjun Guo)

   - Drop lefrover field from struct acpi_memory_device (Hanjun Guo)

   - Make the ACPI extlog driver check for RDMSR failures (Ben
     Hutchings)

   - Fix handling of lid state changes in the ACPI button driver when
     input device is closed (Dmitry Torokhov)

   - Fix several assorted build issues (Barnabás Pőcze, John Garry,
     Nathan Chancellor, Tian Tao)

   - Drop unused inline functions and reduce code duplication by using
     kobj_to_dev() in the NFIT parsing code (YueHaibing, Wang Qing)

   - Serialize tools/power/acpi Makefile (Thomas Renninger)"

* tag 'acpi-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
  ACPICA: Update version to 20200925 Version 20200925
  ACPICA: Remove unnecessary semicolon
  ACPICA: Debugger: Add a new command: "ALL <NameSeg>"
  ACPICA: iASL: Return exceptions for string-to-integer conversions
  ACPICA: acpi_help: Update UUID list
  ACPICA: Add predefined names found in the SMBus sepcification
  ACPICA: Tree-wide: fix various typos and spelling mistakes
  ACPICA: Drop the repeated word "an" in a comment
  ACPICA: Add support for 64 bit risc-v compilation
  ACPI: button: fix handling lid state changes when input device closed
  tools/power/acpi: Serialize Makefile
  ACPI: scan: Replace ACPI_DEBUG_PRINT() with pr_debug()
  ACPI: memhotplug: Remove 'state' from struct acpi_memory_device
  ACPI / extlog: Check for RDMSR failure
  ACPI: Make acpi_evaluate_dsm() prototype consistent
  docs: mm: numaperf.rst Add brief description for access class 1.
  node: Add access1 class to represent CPU to memory characteristics
  ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3
  ACPI: Let ACPI know we support Generic Initiator Affinity Structures
  x86: Support Generic Initiator only proximity domains
  ...

Pull power management updates from Rafael Wysocki:
 "These rework the collection of cpufreq statistics to allow it to take
  place if fast frequency switching is enabled in the governor, rework
  the frequency invariance handling in the cpufreq core and drivers, add
  new hardware support to a couple of cpufreq drivers, fix a number of
  assorted issues and clean up the code all over.

  Specifics:

   - Rework cpufreq statistics collection to allow it to take place when
     fast frequency switching is enabled in the governor (Viresh Kumar).

   - Make the cpufreq core set the frequency scale on behalf of the
     driver and update several cpufreq drivers accordingly (Ionela
     Voinescu, Valentin Schneider).

   - Add new hardware support to the STI and qcom cpufreq drivers and
     improve them (Alain Volmat, Manivannan Sadhasivam).

   - Fix multiple assorted issues in cpufreq drivers (Jon Hunter,
     Krzysztof Kozlowski, Matthias Kaehlcke, Pali Rohár, Stephan
     Gerhold, Viresh Kumar).

   - Fix several assorted issues in the operating performance points
     (OPP) framework (Stephan Gerhold, Viresh Kumar).

   - Allow devfreq drivers to fetch devfreq instances by DT enumeration
     instead of using explicit phandles and modify the devfreq core code
     to support driver-specific devfreq DT bindings (Leonard Crestez,
     Chanwoo Choi).

   - Improve initial hardware resetting in the tegra30 devfreq driver
     and clean up the tegra cpuidle driver (Dmitry Osipenko).

   - Update the cpuidle core to collect state entry rejection statistics
     and expose them via sysfs (Lina Iyer).

   - Improve the ACPI _CST code handling diagnostics (Chen Yu).

   - Update the PSCI cpuidle driver to allow the PM domain
     initialization to occur in the OSI mode as well as in the PC mode
     (Ulf Hansson).

   - Rework the generic power domains (genpd) core code to allow domain
     power off transition to be aborted in the absence of the "power
     off" domain callback (Ulf Hansson).

   - Fix two suspend-to-idle issues in the ACPI EC driver (Rafael
     Wysocki).

   - Fix the handling of timer_expires in the PM-runtime framework on
     32-bit systems and the handling of device links in it (Grygorii
     Strashko, Xiang Chen).

   - Add IO requests batching support to the hibernate image saving and
     reading code and drop a bogus get_gendisk() from there (Xiaoyi
     Chen, Christoph Hellwig).

   - Allow PCIe ports to be put into the D3cold power state if they are
     power-manageable via ACPI (Lukas Wunner).

   - Add missing header file include to a power capping driver (Pujin
     Shi).

   - Clean up the qcom-cpr AVS driver a bit (Liu Shixin).

   - Kevin Hilman steps down as designated reviwer of adaptive voltage
     scaling (AVS) drivers (Kevin Hilman)"

* tag 'pm-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits)
  cpufreq: stats: Fix string format specifier mismatch
  arm: disable frequency invariance for CONFIG_BL_SWITCHER
  cpufreq,arm,arm64: restructure definitions of arch_set_freq_scale()
  cpufreq: stats: Add memory barrier to store_reset()
  cpufreq: schedutil: Simplify sugov_fast_switch()
  ACPI: EC: PM: Drop ec_no_wakeup check from acpi_ec_dispatch_gpe()
  ACPI: EC: PM: Flush EC work unconditionally after wakeup
  PCI/ACPI: Whitelist hotplug ports for D3 if power managed by ACPI
  PM: hibernate: remove the bogus call to get_gendisk() in software_resume()
  cpufreq: Move traces and update to policy->cur to cpufreq core
  cpufreq: stats: Enable stats for fast-switch as well
  cpufreq: stats: Mark few conditionals with unlikely()
  cpufreq: stats: Remove locking
  cpufreq: stats: Defer stats update to cpufreq_stats_record_transition()
  PM: domains: Allow to abort power off when no ->power_off() callback
  PM: domains: Rename power state enums for genpd
  PM / devfreq: tegra30: Improve initial hardware resetting
  PM / devfreq: event: Change prototype of devfreq_event_get_edev_by_phandle function
  PM / devfreq: Change prototype of devfreq_get_devfreq_by_phandle function
  PM / devfreq: Add devfreq_get_devfreq_by_node function
  ...

Merge tag 'platform-drivers-x86-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver updates from Hans de Goede:
 "Rather calm cycle for x86 platform drivers, all these have been in
  for-next for a couple of days with no bot complaints.

  Highlights:

   - PMC TigerLake fixes and new RocketLake support

   - various small fixes / updates in other drivers/tools"

* tag 'platform-drivers-x86-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  MAINTAINERS: update X86 PLATFORM DRIVERS entry with new kernel.org git repo
  platform/x86: mlx-platform: Add capability field to platform FAN description
  platform_data/mlxreg: Extend core platform structure
  platform_data/mlxreg: Update module license
  platform/x86: mlx-platform: Remove PSU EEPROM configuration
  MAINTAINERS: Update maintainers for pmc_core driver
  platform/x86: intel_pmc_core: fix: Replace dev_dbg macro with dev_info()
  platform/x86: intel_pmc_core: Add Intel RocketLake (RKL) support
  platform/x86: intel_pmc_core: Clean up: Remove the duplicate comments and reorganize
  platform/x86: intel_pmc_core: Fix the slp_s0 counter displayed value
  platform/x86: intel_pmc_core: Fix TigerLake power gating status map
  platform/x86: pmc_core: Use descriptive names for LPM registers
  tools/power/x86/intel-speed-select: Update version for v5.10
  tools/power/x86/intel-speed-select: Fix missing base-freq core IDs
  platform/x86: hp-wmi: add support for thermal policy

Pull xen updates from Juergen Gross:

 - two small cleanup patches

 - avoid error messages when initializing MCA banks in a Xen dom0

 - a small series for converting the Xen gntdev driver to use
   pin_user_pages*() instead of get_user_pages*()

 - intermediate fix for running as a Xen guest on Arm with KPTI enabled
   (the final solution will need new Xen functionality)

* tag 'for-linus-5.10b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  x86/xen: Fix typo in xen_pagetable_p2m_free()
  x86/xen: disable Firmware First mode for correctable memory errors
  xen/arm: do not setup the runstate info page if kpti is enabled
  xen: remove redundant initialization of variable ret
  xen/gntdev.c: Convert get_user_pages*() to pin_user_pages*()
  xen/gntdev.c: Mark pages as dirty

Pull Hyper-V updates from Wei Liu:

 - a series from Boqun Feng to support page size larger than 4K

 - a few miscellaneous clean-ups

* tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  hv: clocksource: Add notrace attribute to read_hv_sched_clock_*() functions
  x86/hyperv: Remove aliases with X64 in their name
  PCI: hv: Document missing hv_pci_protocol_negotiation() parameter
  scsi: storvsc: Support PAGE_SIZE larger than 4K
  Driver: hv: util: Use VMBUS_RING_SIZE() for ringbuffer sizes
  HID: hyperv: Use VMBUS_RING_SIZE() for ringbuffer sizes
  Input: hyperv-keyboard: Use VMBUS_RING_SIZE() for ringbuffer sizes
  hv_netvsc: Use HV_HYP_PAGE_SIZE for Hyper-V communication
  hv: hyperv.h: Introduce some hvpfn helper functions
  Drivers: hv: vmbus: Move virt_to_hvpfn() to hyperv header
  Drivers: hv: Use HV_HYP_PAGE in hv_synic_enable_regs()
  Drivers: hv: vmbus: Introduce types of GPADL
  Drivers: hv: vmbus: Move __vmbus_open()
  Drivers: hv: vmbus: Always use HV_HYP_PAGE_SIZE for gpadl
  drivers: hv: remove cast from hyperv_die_event

Pull x86 SEV-ES support from Borislav Petkov:
 "SEV-ES enhances the current guest memory encryption support called SEV
  by also encrypting the guest register state, making the registers
  inaccessible to the hypervisor by en-/decrypting them on world
  switches. Thus, it adds additional protection to Linux guests against
  exfiltration, control flow and rollback attacks.

  With SEV-ES, the guest is in full control of what registers the
  hypervisor can access. This is provided by a guest-host exchange
  mechanism based on a new exception vector called VMM Communication
  Exception (#VC), a new instruction called VMGEXIT and a shared
  Guest-Host Communication Block which is a decrypted page shared
  between the guest and the hypervisor.

  Intercepts to the hypervisor become #VC exceptions in an SEV-ES guest
  so in order for that exception mechanism to work, the early x86 init
  code needed to be made able to handle exceptions, which, in itself,
  brings a bunch of very nice cleanups and improvements to the early
  boot code like an early page fault handler, allowing for on-demand
  building of the identity mapping. With that, !KASLR configurations do
  not use the EFI page table anymore but switch to a kernel-controlled
  one.

  The main part of this series adds the support for that new exchange
  mechanism. The goal has been to keep this as much as possibly separate
  from the core x86 code by concentrating the machinery in two
  SEV-ES-specific files:

    arch/x86/kernel/sev-es-shared.c
    arch/x86/kernel/sev-es.c

  Other interaction with core x86 code has been kept at minimum and
  behind static keys to minimize the performance impact on !SEV-ES
  setups.

  Work by Joerg Roedel and Thomas Lendacky and others"

* tag 'x86_seves_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (73 commits)
  x86/sev-es: Use GHCB accessor for setting the MMIO scratch buffer
  x86/sev-es: Check required CPU features for SEV-ES
  x86/efi: Add GHCB mappings when SEV-ES is active
  x86/sev-es: Handle NMI State
  x86/sev-es: Support CPU offline/online
  x86/head/64: Don't call verify_cpu() on starting APs
  x86/smpboot: Load TSS and getcpu GDT entry before loading IDT
  x86/realmode: Setup AP jump table
  x86/realmode: Add SEV-ES specific trampoline entry point
  x86/vmware: Add VMware-specific handling for VMMCALL under SEV-ES
  x86/kvm: Add KVM-specific VMMCALL handling under SEV-ES
  x86/paravirt: Allow hypervisor-specific VMMCALL handling under SEV-ES
  x86/sev-es: Handle #DB Events
  x86/sev-es: Handle #AC Events
  x86/sev-es: Handle VMMCALL Events
  x86/sev-es: Handle MWAIT/MWAITX Events
  x86/sev-es: Handle MONITOR/MONITORX Events
  x86/sev-es: Handle INVD Events
  x86/sev-es: Handle RDPMC Events
  x86/sev-es: Handle RDTSC(P) Events
  ...

Pull objtool updates from Ingo Molnar:
 "Most of the changes are cleanups and reorganization to make the
  objtool code more arch-agnostic. This is in preparation for non-x86
  support.

  Other changes:

   - KASAN fixes

   - Handle unreachable trap after call to noreturn functions better

   - Ignore unreachable fake jumps

   - Misc smaller fixes & cleanups"

* tag 'objtool-core-2020-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
  perf build: Allow nested externs to enable BUILD_BUG() usage
  objtool: Allow nested externs to enable BUILD_BUG()
  objtool: Permit __kasan_check_{read,write} under UACCESS
  objtool: Ignore unreachable trap after call to noreturn functions
  objtool: Handle calling non-function symbols in other sections
  objtool: Ignore unreachable fake jumps
  objtool: Remove useless tests before save_reg()
  objtool: Decode unwind hint register depending on architecture
  objtool: Make unwind hint definitions available to other architectures
  objtool: Only include valid definitions depending on source file type
  objtool: Rename frame.h -> objtool.h
  objtool: Refactor jump table code to support other architectures
  objtool: Make relocation in alternative handling arch dependent
  objtool: Abstract alternative special case handling
  objtool: Move macros describing structures to arch-dependent code
  objtool: Make sync-check consider the target architecture
  objtool: Group headers to check in a single list
  objtool: Define 'struct orc_entry' only when needed
  objtool: Skip ORC entry creation for non-text sections
  objtool: Move ORC logic out of check()
  ...

Merge misc updates from Andrew Morton:
 "181 patches.

  Subsystems affected by this patch series: kbuild, scripts, ntfs,
  ocfs2, vfs, mm (slab, slub, kmemleak, dax, debug, pagecache, fadvise,
  gup, swap, memremap, memcg, selftests, pagemap, mincore, hmm, dma,
  memory-failure, vmallo and migration)"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (181 commits)
  mm/migrate: remove obsolete comment about device public
  mm/migrate: remove cpages-- in migrate_vma_finalize()
  mm, oom_adj: don't loop through tasks in __set_oom_adj when not necessary
  memblock: use separate iterators for memory and reserved regions
  memblock: implement for_each_reserved_mem_region() using __next_mem_region()
  memblock: remove unused memblock_mem_size()
  x86/setup: simplify reserve_crashkernel()
  x86/setup: simplify initrd relocation and reservation
  arch, drivers: replace for_each_membock() with for_each_mem_range()
  arch, mm: replace for_each_memblock() with for_each_mem_pfn_range()
  memblock: reduce number of parameters in for_each_mem_range()
  memblock: make memblock_debug and related functionality private
  memblock: make for_each_memblock_type() iterator private
  mircoblaze: drop unneeded NUMA and sparsemem initializations
  riscv: drop unneeded node initialization
  h8300, nds32, openrisc: simplify detection of memory extents
  arm64: numa: simplify dummy_numa_init()
  arm, xtensa: simplify initialization of high memory pages
  dma-contiguous: simplify cma_early_percent_memory()
  KVM: PPC: Book3S HV: simplify kvm_cma_reserve()
  ...

Device public memory never had an in tree consumer and was removed in
commit 25b2995a ("mm: remove MEMORY_DEVICE_PUBLIC support").  Delete
the obsolete comment.
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20200827190735.12752-2-rcampbell@nvidia.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The variable struct migrate_vma->cpages is only used in
migrate_vma_setup().  There is no need to decrement it in
migrate_vma_finalize() since it is never checked.
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20200827190735.12752-1-rcampbell@nvidia.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently __set_oom_adj loops through all processes in the system to keep
oom_score_adj and oom_score_adj_min in sync between processes sharing
their mm.  This is done for any task with more that one mm_users, which
includes processes with multiple threads (sharing mm and signals).
However for such processes the loop is unnecessary because their signal
structure is shared as well.

Android updates oom_score_adj whenever a tasks changes its role
(background/foreground/...) or binds to/unbinds from a service, making it
more/less important.  Such operation can happen frequently.  We noticed
that updates to oom_score_adj became more expensive and after further
investigation found out that the patch mentioned in "Fixes" introduced a
regression.  Using Pixel 4 with a typical Android workload, write time to
oom_score_adj increased from ~3.57us to ~362us.  Moreover this regression
linearly depends on the number of multi-threaded processes running on the
system.

Mark the mm with a new MMF_MULTIPROCESS flag bit when task is created with
(CLONE_VM && !CLONE_THREAD && !CLONE_VFORK).  Change __set_oom_adj to use
MMF_MULTIPROCESS instead of mm_users to decide whether oom_score_adj
update should be synchronized between multiple processes.  To prevent
races between clone() and __set_oom_adj(), when oom_score_adj of the
process being cloned might be modified from userspace, we use
oom_adj_mutex.  Its scope is changed to global.

The combination of (CLONE_VM && !CLONE_THREAD) is rarely used except for
the case of vfork().  To prevent performance regressions of vfork(), we
skip taking oom_adj_mutex and setting MMF_MULTIPROCESS when CLONE_VFORK is
specified.  Clearing the MMF_MULTIPROCESS flag (when the last process
sharing the mm exits) is left out of this patch to keep it simple and
because it is believed that this threading model is rare.  Should there
ever be a need for optimizing that case as well, it can be done by hooking
into the exit path, likely following the mm_update_next_owner pattern.

With the combination of (CLONE_VM && !CLONE_THREAD && !CLONE_VFORK) being
quite rare, the regression is gone after the change is applied.

[surenb@google.com: v3]
  Link: https://lkml.kernel.org/r/20200902012558.2335613-1-surenb@google.com

Fixes: 44a70ade ("mm, oom_adj: make sure processes sharing mm have same view of oom_score_adj")
Reported-by: Tim Murray <timmurray@google.com>
Suggested-by: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Cc: Christian Kellner <christian@kellner.me>
Cc: Adrian Reber <areber@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Alexey Gladkov <gladkov.alexey@gmail.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Bernd Edlinger <bernd.edlinger@hotmail.de>
Cc: John Johansen <john.johansen@canonical.com>
Cc: Yafang Shao <laoar.shao@gmail.com>
Link: https://lkml.kernel.org/r/20200824153036.3201505-1-surenb@google.comDebugged-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

for_each_memblock() is used to iterate over memblock.memory in a few
places that use data from memblock_region rather than the memory ranges.

Introduce separate for_each_mem_region() and
for_each_reserved_mem_region() to improve encapsulation of memblock
internals from its users.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Ingo Molnar <mingo@kernel.org>			[x86]
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>	[MIPS]
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>	[.clang-format]
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-18-rppt@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Iteration over memblock.reserved with for_each_reserved_mem_region() used
__next_reserved_mem_region() that implemented a subset of
__next_mem_region().

Use __for_each_mem_range() and, essentially, __next_mem_region() with
appropriate parameters to reduce code duplication.

While on it, rename for_each_reserved_mem_region() to
for_each_reserved_mem_range() for consistency.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>	[.clang-format]
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-17-rppt@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The only user of memblock_mem_size() was x86 setup code, it is gone now
and memblock_mem_size() funciton can be removed.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-16-rppt@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* Replace magic numbers with defines
* Replace memblock_find_in_range() + memblock_reserve() with
  memblock_phys_alloc_range()
* Stop checking for low memory size in reserve_crashkernel_low(). The
  allocation from limited range will anyway fail if there is no enough
  memory, so there is no need for extra traversal of memblock.memory
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-15-rppt@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently, initrd image is reserved very early during setup and then it
might be relocated and re-reserved after the initial physical memory
mapping is created.  The "late" reservation of memblock verifies that
mapped memory size exceeds the size of initrd, then checks whether the
relocation required and, if yes, relocates inirtd to a new memory
allocated from memblock and frees the old location.

The check for memory size is excessive as memblock allocation will anyway
fail if there is not enough memory.  Besides, there is no point to
allocate memory from memblock using memblock_find_in_range() +
memblock_reserve() when there exists memblock_phys_alloc_range() with
required functionality.

Remove the redundant check and simplify memblock allocation.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-14-rppt@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There are several occurrences of the following pattern:

	for_each_memblock(memory, reg) {
		start = __pfn_to_phys(memblock_region_memory_base_pfn(reg);
		end = __pfn_to_phys(memblock_region_memory_end_pfn(reg));

		/* do something with start and end */
	}

Using for_each_mem_range() iterator is more appropriate in such cases and
allows simpler and cleaner code.

[akpm@linux-foundation.org: fix arch/arm/mm/pmsa-v7.c build]
[rppt@linux.ibm.com: mips: fix cavium-octeon build caused by memblock refactoring]
  Link: http://lkml.kernel.org/r/20200827124549.GD167163@linux.ibm.comSigned-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-13-rppt@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There are several occurrences of the following pattern:

	for_each_memblock(memory, reg) {
		start_pfn = memblock_region_memory_base_pfn(reg);
		end_pfn = memblock_region_memory_end_pfn(reg);

		/* do something with start_pfn and end_pfn */
	}

Rather than iterate over all memblock.memory regions and each time query
for their start and end PFNs, use for_each_mem_pfn_range() iterator to get
simpler and clearer code.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>	[.clang-format]
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-12-rppt@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently for_each_mem_range() and for_each_mem_range_rev() iterators are
the most generic way to traverse memblock regions.  As such, they have 8
parameters and they are hardly convenient to users.  Most users choose to
utilize one of their wrappers and the only user that actually needs most
of the parameters is memblock itself.

To avoid yet another naming for memblock iterators, rename the existing
for_each_mem_range[_rev]() to __for_each_mem_range[_rev]() and add a new
for_each_mem_range[_rev]() wrappers with only index, start and end
parameters.

The new wrapper nicely fits into init_unavailable_mem() and will be used
in upcoming changes to simplify memblock traversals.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>	[MIPS]
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-11-rppt@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The only user of memblock_dbg() outside memblock was s390 setup code and
it is converted to use pr_debug() instead.  This allows to stop exposing
memblock_debug and memblock_dbg() to the rest of the kernel.

[akpm@linux-foundation.org: make memblock_dbg() safer and neater]
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-10-rppt@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

for_each_memblock_type() is not used outside mm/memblock.c, move it there
from include/linux/memblock.h
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-9-rppt@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

microblaze does not support neither NUMA not SPARSMEM, so there is no
point to call memblock_set_node() and
sparse_memory_present_with_active_regions() functions during microblaze
memory initialization.

Remove these calls and the surrounding code.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-8-rppt@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

RISC-V does not (yet) support NUMA and for UMA architectures node 0 is
used implicitly during early memory initialization.

There is no need to call memblock_set_node(), remove this call and the
surrounding code.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-7-rppt@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Instead of traversing memblock.memory regions to find memory_start and
memory_end, simply query memblock_{start,end}_of_DRAM().
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Stafford Horne <shorne@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-6-rppt@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dummy_numa_init() loops over memblock.memory and passes nid=0 to
numa_add_memblk() which essentially wraps memblock_set_node().  However,
memblock_set_node() can cope with entire memory span itself, so the loop
over memblock.memory regions is redundant.

Using a single call to memblock_set_node() rather than a loop also fixes
an issue with a buggy ACPI firmware in which the SRAT table covers some
but not all of the memory in the EFI memory map.

Jonathan Cameron says:

  This issue can be easily triggered by having an SRAT table which fails
  to cover all elements of the EFI memory map.

  This firmware error is detected and a warning printed. e.g.
  "NUMA: Warning: invalid memblk node 64 [mem 0x240000000-0x27fffffff]"
  At that point we fall back to dummy_numa_init().

  However, the failed ACPI init has left us with our memblocks all broken
  up as we split them when trying to assign them to NUMA nodes.

  We then iterate over the memblocks and add them to node 0.

  numa_add_memblk() calls memblock_set_node() which merges regions that
  were previously split up during the earlier attempt to add them to
  different nodes during parsing of SRAT.

  This means elements are moved in the memblock array and we can end up
  in a different memblock after the call to numa_add_memblk().
  Result is:

  Unable to handle kernel paging request at virtual address 0000000000003a40
  Mem abort info:
    ESR = 0x96000004
    EC = 0x25: DABT (current EL), IL = 32 bits
    SET = 0, FnV = 0
    EA = 0, S1PTW = 0
  Data abort info:
    ISV = 0, ISS = 0x00000004
    CM = 0, WnR = 0
  [0000000000003a40] user address but active_mm is swapper
  Internal error: Oops: 96000004 [#1] PREEMPT SMP

  ...

  Call trace:
    sparse_init_nid+0x5c/0x2b0
    sparse_init+0x138/0x170
    bootmem_init+0x80/0xe0
    setup_arch+0x2a0/0x5fc
    start_kernel+0x8c/0x648

Replace the loop with a single call to memblock_set_node() to the entire
memory.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-5-rppt@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

free_highpages() in both arm and xtensa essentially open-code
for_each_free_mem_range() loop to detect high memory pages that were not
reserved and that should be initialized and passed to the buddy allocator.

Replace open-coded implementation of for_each_free_mem_range() with usage
of memblock API to simplify the code.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Max Filippov <jcmvbkbc@gmail.com>	[xtensa]
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>	[xtensa]
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-4-rppt@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The memory size calculation in cma_early_percent_memory() traverses
memblock.memory rather than simply call memblock_phys_mem_size().  The
comment in that function suggests that at some point there should have
been call to memblock_analyze() before memblock_phys_mem_size() could be
used.  As of now, there is no memblock_analyze() at all and
memblock_phys_mem_size() can be used as soon as cold-plug memory is
registered with memblock.

Replace loop over memblock.memory with a call to memblock_phys_mem_size().
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-3-rppt@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "memblock: seasonal cleaning^w cleanup", v3.

These patches simplify several uses of memblock iterators and hide some of
the memblock implementation details from the rest of the system.

This patch (of 17):

The memory size calculation in kvm_cma_reserve() traverses memblock.memory
rather than simply call memblock_phys_mem_size().  The comment in that
function suggests that at some point there should have been call to
memblock_analyze() before memblock_phys_mem_size() could be used.  As of
now, there is no memblock_analyze() at all and memblock_phys_mem_size()
can be used as soon as cold-plug memory is registered with memblock.

Replace loop over memblock.memory with a call to memblock_phys_mem_size().
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Link: https://lkml.kernel.org/r/20200818151634.14343-1-rppt@kernel.org
Link: https://lkml.kernel.org/r/20200818151634.14343-2-rppt@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add else to split mutually exclusive case and avoid some unnecessary check.
It doesn't seem to change code generation (compiler is smart), but I think
it helps readability.

[akpm@linux-foundation.org: fix comment location]
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200924111641.28922-1-linmiaohe@huawei.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

No one use this macro anymore.

Also fix code style of policy_node().
Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200921021401.84508-1-richard.weiyang@linux.alibaba.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

It is not necessary to hold the lock of current when setting nodemask of
a new policy.
Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200921040416.86185-1-richard.weiyang@linux.alibaba.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch reduces the running time for compaction_test from about 27 sec,
to 3.3 sec, which is about an 8x speedup.

These numbers are for an Intel x86_64 system with 32 GB of DRAM.

The compaction_test.c program was spending most of its time doing mmap(),
1 MB at a time, on about 25 GB of memory.

Instead, do the mmaps 100 MB at a time.  (Going past 100 MB doesn't make
things go much faster, because other parts of the program are using the
remaining time.)
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Sri Jayaramappa <sjayaram@akamai.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Link: https://lkml.kernel.org/r/20201002080621.551044-2-jhubbard@nvidia.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The enum value 'COMPACT_INACTIVE' is never used so can be removed.
Signed-off-by: Mateusz Nosek <mateusznosek0@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200917110750.12015-1-mateusznosek0@gmail.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The same code can work both for 'zone->compact_considered > defer_limit'
and 'zone->compact_considered >= defer_limit'.  In the latter there is one
branch less which is more effective considering performance.
Signed-off-by: Mateusz Nosek <mateusznosek0@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Link: https://lkml.kernel.org/r/20200913190448.28649-1-mateusznosek0@gmail.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zhdr is already initialized in the front of the function, so remove
redundant initialization here.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Link: https://lkml.kernel.org/r/1600419885-191907-1-git-send-email-chenxiang66@hisilicon.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

alloc_slots() allocates memory for slots using kmem_cache_alloc(), then
memsets it.  We can just use kmem_cache_zalloc().
Signed-off-by: Hui Su <sh_def@163.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200926100834.GA184671@rlkSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fix comments for isolate_lru_page():
s/fundamentnal/fundamental
Signed-off-by: Hui Su <sh_def@163.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200927173923.GA8058@rlkSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>