Intentional changes:
- Use socat instead of netcat
- Use a temporary file instead of pipe, else packets do not match
  "-m string" rules, multiple writes to the pipe cause multiple packets,
  but this needs only one to work.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240418152744.15105-6-fw@strlen.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Also do shellcheck cleanups here, no functional changes intended.
When running tests via vng tool, the packetpath insertion test fails:
dd: failed to open '/dev/stdout': Device or resource busy

Just omit 'of=' and this will work as intended.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240418152744.15105-5-fw@strlen.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

use checktool helper where applicable.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240418152744.15105-4-fw@strlen.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

No functional change intended.  Disable frequent shellcheck warnings wrt.
"unreachable" code, those helpers get called indirectly from busywait helper.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240418152744.15105-3-fw@strlen.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

- switch to socat, like other tests
- use buswait helper to test once listener netns is ready
- do not generate multiple input test files, only generate
  one and use cleanup hook to remove it, like other temporary files.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240418152744.15105-2-fw@strlen.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Eric Dumazet says:

====================
neighbour: convert neigh_dump_info() to RCU

Remove RTNL requirement for "ip neighbour show" command.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

neigh_dump_table() is already relying on RCU protection.

pneigh_dump_table() is using its own protection (tbl->lock)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change neigh_dump_table() and pneigh_dump_table()
to either return 0 or -EMSGSIZE if not enough
space was available in the skb.

Then neigh_dump_info() can do the same.

This allows NLMSG_DONE to be appended to the current
skb at the end of a dump, saving a couple of recvmsg()
system calls.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order to remove RTNL protection from neightbl_dump_info()
and neigh_dump_info() later, we need to add
RCU protection to neigh_tables[].
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The kernel build bot identified the following mistake in the recently
merged 860a9bed ("net: dsa: xrs700x: provide own phylink MAC
operations") patch:

drivers/net/dsa/xrs700x/xrs700x.c:714:37: warning: 'xrs700x_phylink_mac_ops' defined but not used [-Wunused-const-variable=]
     714 | static const struct phylink_mac_ops xrs700x_phylink_mac_ops = {
         |                                     ^~~~~~~~~~~~~~~~~~~~~~~

Fix the omitted assignment of ds->phylink_mac_ops.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jason Xing says:

====================
locklessly protect left members in struct rps_dev_flow

From: Jason Xing <kernelxing@tencent.com>

Since Eric did a more complicated locklessly change to last_qtail
member[1] in struct rps_dev_flow, the left members are easier to change
as the same.

One thing important I would like to share by qooting Eric:
"rflow is located in rxqueue->rps_flow_table, it is thus private to current
thread. Only one cpu can service an RX queue at a time."
So we only pay attention to the reader in the rps_may_expire_flow() and
writer in the set_rps_cpu(). They are in the two different contexts.

[1]:
https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=3b4cf29bdab

v3
Link: https://lore.kernel.org/all/20240417062721.45652-1-kerneljasonxing@gmail.com/
1. adjust the protection in a right way (Eric)

v2
1. fix passing wrong type qtail.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This is the last member in struct rps_dev_flow which should be
protected locklessly. So finish it.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As we can see, rflow->filter can be written/read concurrently, so
lockless access is needed.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Removing one unnecessary reader protection and add another writer
protection to finish the locklessly proctection job.

Note: the removed READ_ONCE() is not needed because we only have to protect
the locklessly reader in the different context (rps_may_expire_flow()).
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
net_sched: first series for RTNL-less qdisc dumps

Medium term goal is to implement "tc qdisc show" without needing
to acquire RTNL.

This first series makes the requested changes in 14 qdisc.

Notes :

 - RTNL is still held in "tc qdisc show", more changes are needed.

 - Qdisc returning many attributes might want/need to provide
   a consistent set of attributes. If that is the case, their
   dump() method could acquire the qdisc spinlock, to pair the
   spinlock acquision in their change() method.

V2: Addressed Simon feedback (Thanks a lot Simon)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of relying on RTNL, skbprio_dump() can use READ_ONCE()
annotation, paired with WRITE_ONCE() one in skbprio_change().

Also add a READ_ONCE(sch->limit) in skbprio_enqueue().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of relying on RTNL, pie_dump() can use READ_ONCE()
annotations, paired with WRITE_ONCE() ones in pie_change().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of relying on RTNL, hhf_dump() can use READ_ONCE()
annotations, paired with WRITE_ONCE() ones in hhf_change().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of relying on RTNL, hfsc_dump_qdisc() can use READ_ONCE()
annotation, paired with WRITE_ONCE() one in hfsc_change_qdisc().

Use READ_ONCE(q->defcls) in hfsc_classify() to
no longer acquire qdisc lock from hfsc_change_qdisc().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of relying on RTNL, fq_pie_dump() can use READ_ONCE()
annotations, paired with WRITE_ONCE() ones in fq_pie_change().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of relying on RTNL, fq_codel_dump() can use READ_ONCE()
annotations, paired with WRITE_ONCE() ones in fq_codel_change().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of relying on RTNL, __fifo_dump() can use READ_ONCE()
annotations, paired with WRITE_ONCE() ones in __fifo_init().

Also add missing READ_ONCE(sh->limit) in bfifo_enqueue(),
pfifo_enqueue() and pfifo_tail_enqueue().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of relying on RTNL, ets_dump() can use READ_ONCE()
annotations, paired with WRITE_ONCE() ones in ets_change().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of relying on RTNL, codel_dump() can use READ_ONCE()
annotations.

There is no etf_change() yet, this patch imply aligns
this qdisc with others.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of relying on RTNL, codel_dump() can use READ_ONCE()
annotations, paired with WRITE_ONCE() ones in codel_change().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of relying on RTNL, choke_dump() can use READ_ONCE()
annotations, paired with WRITE_ONCE() ones in choke_change().

v2: added a WRITE_ONCE(p->Scell_log, Scell_log)
    per Simon feedback in V1
    Removed the READ_ONCE(q->limit) in choke_enqueue()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of relying on RTNL, cbs_dump() can use READ_ONCE()
annotations, paired with WRITE_ONCE() ones in cbs_change().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of relying on RTNL, cake_dump() can use READ_ONCE()
annotations, paired with WRITE_ONCE() ones in cake_change().

v2: addressed Simon feedback in V1: https://lore.kernel.org/netdev/20240417083549.GA3846178@kernel.org/Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Toke Høiland-Jørgensen <toke@toke.dk>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of relying on RTNL, fq_dump() can use READ_ONCE()
annotations, paired with WRITE_ONCE() in fq_change()

v2: Addressed Simon feedback in V1: https://lore.kernel.org/netdev/20240416181915.GT2320920@kernel.org/Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The qpl_cfg struct was used to make sure that no two different queues
are using QPL with the same qpl_id. We can remove that qpl_cfg struct
since now the qpl_ids map with the queues respectively as follows:
For tx queues: qpl_id = tx_qid
For rx queues: qpl_id = max_tx_queues + rx_qid

And when XDP is used, it will need the user to reduce the tx queues to
be at most half of the max_tx_queues. Then it will use the same number
of tx queues starting from the end of existing tx queues for XDP. So the
XDP queues will not exceed the max_tx_queues range and will not overlap
with the rx queues, where the qpl_ids will not have overlapping too.

Considering of that, we remove the qpl_cfg struct to get the qpl_id
directly based on the queue id. Unless we are erroneously allocating a
rx/tx queue that has already been allocated, we would never allocate
the qpl with the same qpl_id twice. In that case, it should fail much
earlier than the QPL assignment.
Suggested-by: Praveen Kaligineedi <pkaligineedi@google.com>
Signed-off-by: Ziwei Xiao <ziweixiao@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Shailend Chand <shailend@google.com>
Link: https://lore.kernel.org/r/20240417205757.778551-1-ziweixiao@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Kory Maincent says:

====================
net: Add support for Power over Ethernet (PoE)

This patch series aims at adding support for PoE (Power over Ethernet),
based on the already existing support for PoDL (Power over Data Line)
implementation. In addition, it adds support for two specific PoE
controller, the Microchip PD692x0 and the TI TPS23881.
====================

Link: https://lore.kernel.org/all/20240417-feature_poe-v9-0-242293fd1900@bootlin.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add a new driver for the TI TPS23881 I2C Power Sourcing Equipment
controller.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-14-242293fd1900@bootlin.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add the TPS23881 I2C Power Sourcing Equipment controller device tree
bindings documentation.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-13-242293fd1900@bootlin.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add a new driver for the PD692x0 I2C Power Sourcing Equipment controller.
This driver only support i2c communication for now.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-12-242293fd1900@bootlin.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add the PD692x0 I2C Power Sourcing Equipment controller device tree
bindings documentation.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-11-242293fd1900@bootlin.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Integrate the regulator framework to the PSE framework for enhanced
access to features such as voltage, power measurement, and limits, which
are akin to regulators. Additionally, PSE features like port priorities
could potentially enhance the regulator framework. Note that this
integration introduces some implementation complexity, including wrapper
callbacks, but the potential benefits make it worthwhile.

Regulator are using enable counter with specific behavior.
Two calls to regulator_disable will trigger kernel warnings.
If the counter exceeds one, regulator_disable call won't disable the
PSE PI. These behavior isn't suitable for PSE control.
Added a boolean 'enabled' state to prevent multiple calls to
regulator_enable/disable. These calls will only be called from PSE
framework as it won't have any regulator children, therefore no mutex are
needed to safeguards this boolean.

regulator_get needs the consumer device pointer. Use PSE as regulator
provider and consumer device until we have RJ45 ports represented in
the Kernel.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-10-242293fd1900@bootlin.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Implement setup_pi_matrix callback to configure the PSE PI matrix. This
functionality is invoked before registering the PSE and following the core
parsing of the pse_pis devicetree subnode.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-9-242293fd1900@bootlin.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

PSE PI setup may encompass multiple PSE controllers or auxiliary circuits
that collectively manage power delivery to one Ethernet port.
Such configurations might support a range of PoE standards and require
the capability to dynamically configure power delivery based on the
operational mode (e.g., PoE2 versus PoE4) or specific requirements of
connected devices. In these instances, a dedicated PSE PI node becomes
essential for accurately documenting the system architecture. This node
would serve to detail the interactions between different PSE controllers,
the support for various PoE modes, and any additional logic required to
coordinate power delivery across the network infrastructure.

The old usage of "#pse-cells" is unsuficient as it carries only the PSE PI
index information.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-8-242293fd1900@bootlin.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The Power Sourcing Equipment Power Interface (PSE PI) plays a pivotal role
in the architecture of Power over Ethernet (PoE) systems. It is essentially
a blueprint that outlines how one or multiple power sources are connected
to the eight-pin modular jack, commonly known as the Ethernet RJ45 port.
This connection scheme is crucial for enabling the delivery of power
alongside data over Ethernet cables.

This patch adds support for getting the PSE controller node through PSE PI
device subnode.

This supports adds a way to get the PSE PI id from the pse_pi devicetree
subnode of a PSE controller node simply by reading the reg property.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-7-242293fd1900@bootlin.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

As I add support for PoE in PSE networking subsystem it seems legitimate
to be added to the maintainers.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-6-242293fd1900@bootlin.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>