- 27 Feb, 2011 3 commits
-
-
Nils Faerber authored
The patch is against the 2.6.37 drivers/staging/samsung-laptop driver and implements some extra enhancements. It fixes an issue that the brightness would not change the level at once as well as and some other oddities. It was resolved by reallocated the SABI memory reagion using the "nocache" option. The patch also introduces a new set of supported netbook models, especially the NC10plus which was used for testing this patch. This new set of models also offer 9 instead of just 8 brightness levels so it also introduces an additional parameter for the models struct so that models can define their own brightness range. Signed-off-by:
Nils Faerber <nils.faerber@kernelconcepts.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Riccardo Magliocchetti authored
Signed-off-by:
Riccardo Magliocchetti <riccardo.magliocchetti@gmail.com> Signed-off-by:
-
Joe Perches authored
Change sabi_config to const. Reduces data, increases text ~200 bytes. $ size drivers/platform/x86/samsung-laptop.o* text data bss dec hex filename 6933 5084 1560 13577 3509 drivers/platform/x86/samsung-laptop.o.new 6765 5252 1560 13577 3509 drivers/platform/x86/samsung-laptop.o.old Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
- 25 Feb, 2011 6 commits
-
-
Greg Kroah-Hartman authored
Fixed up the printk stuff to use pr_XXX where applicable, and reversed the logic when testing for commands to complete properly. Signed-off-by: -
Greg Kroah-Hartman authored
When doing the conversion to the "support more than one model" the header address of the N128 was incorrectly copied. This fixes the driver to work properly now on this laptop model. Cc: Ingmar Steen <iksteen@gmail.com> Signed-off-by: -
Roman Grebennikov authored
Add Samsung NP-X120/X170 laptop DMI signature to samsung-laptop DMI table. Signed-off-by:
Roman Grebennikov <grebennikov.roman@gmail.com> Signed-off-by:
-
Greg Kroah-Hartman authored
Reported-by:
Piotr Mitas <yabolus@gmail.com> Signed-off-by:
-
Greg Kroah-Hartman authored
Reported-by:
Evgeny Bobkin <stwooe@mail.tu-berlin.de> Signed-off-by:
-
Richard Schütz authored
Add DMI data for Samsung N145P/N250P/N260P Signed-off-by:
Richard Schütz <r.schtz@t-online.de> Signed-off-by:
-
- 23 Feb, 2011 31 commits
-
-
Manohar Vanga authored
Fix loop condition in vme_register_bridge that results in an infinite loop in the event that device_register fails. Signed-off-by:
Manohar Vanga <manohar.vanga@cern.ch> Acked-by:
Martyn Welch <martyn.welch@ge.com> Acked-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Manohar Vanga authored
Removed some unreachable code from vme_register_bridge Signed-off-by:
-
Michael Hennerich authored
This driver allows any Blackfin system timer to be used as IIO trigger. It supports trigger rates from 0 to 100kHz in Hz resolution. Changes since V1: IIO: trigger: Apply review feedback Add comment explaining Blackfin hardware timer configurations Fix frequency_store, don't return -EINVAL for frequency set to 0 Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Acked-by:
Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by:
-
Michael Hennerich authored
Add support for the AD5543/AD5553 SPI 16-/14-Bit DACs Fix typo in kconfig description Changes since V1: reorder Kconfig help text Signed-off-by:
-
Michael Hennerich authored
This patch adds support for the: AD7606/AD7606-6/AD7606-4 8/6/4-Channel Data Acquisition system (DAS) with 16-Bit, Bipolar, Simultaneous Sampling ADC. Changes since V1: IIO: ADC: New driver for AD7606/AD7606-6/AD7606-4: Apply review feedback Rename sysfs node oversampling to oversampling_ratio. Kconfig: Add GPIOLIB dependency. Use range in mV to better match HWMON. Rename ad7606_check_oversampling. Fix various comments and style. Reorder is_visible cases. Use new gpio_request_one/array and friends. Drop check for SPI max_speed_hz. Changes since V2: IIO: ADC: New driver for AD7606/AD7606-6/AD7606-4: Apply review feedback Documentation: specify unit Avoid raise condition in ad7606_scan_direct() Check return value of bus ops read_block() Changes since V3: IIO: ADC: New driver for AD7606/AD7606-6/AD7606-4: Add missing include file Add linux/sched.h Changes since V4: IIO: ADC: New driver for AD7606/AD7606-6/AD7606-4: Fix kconfig declaration consistently use tristate to avoid configuration mismatches Signed-off-by:
-
Pavan Savoy authored
This is the bluetooth protocol driver for the TI WiLink7 chipsets. Texas Instrument's WiLink chipsets combine wireless technologies like BT, FM, GPS and WLAN onto a single chip. This Bluetooth driver works on top of the TI_ST shared transport line discipline driver which also allows other drivers like FM V4L2 and GPS character driver to make use of the same UART interface. Kconfig and Makefile modifications to enable the Bluetooth driver for Texas Instrument's WiLink 7 chipset. Signed-off-by:
Pavan Savoy <pavan_savoy@ti.com> Acked-by:
Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by:
-
Randy Dunlap authored
drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c:106: error: 'acpi_gbl_FADT' undeclared (first use in this function) Fixing that one gives: ERROR: "backlight_device_register" [drivers/staging/olpc_dcon/olpc-dcon.ko] undefined! ERROR: "registered_fb" [drivers/staging/olpc_dcon/olpc-dcon.ko] undefined! ERROR: "lock_fb_info" [drivers/staging/olpc_dcon/olpc-dcon.ko] undefined! ERROR: "backlight_device_unregister" [drivers/staging/olpc_dcon/olpc-dcon.ko] undefined! ERROR: "num_registered_fb" [drivers/staging/olpc_dcon/olpc-dcon.ko] undefined! ERROR: "fb_blank" [drivers/staging/olpc_dcon/olpc-dcon.ko] undefined! Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Chris Ball <cjb@laptop.org> Cc: Jon Nettleton <jon.nettleton@gmail.com> Acked-By:
Andres Salomon <dilinger@queued.net> Signed-off-by:
-
Christopher Brannon authored
The cur_item variable from keyhelp.c is an index into a table of messages. The following condition should always hold: MSG_FUNCNAMES_START + cur_item <= MSG_FUNCNAMES_END. The check in keyhelp.c was wrong. It allowed cur_item to be incremented to an out-of-bounds value. Signed-off-by:
Christopher Brannon <chris@the-brannons.com> Signed-off-by:
-
Marcin Slusarz authored
Commit 1bd751c1 ("Staging: et131x: Clean up rxdma_csr") changed csr from bitfield to u32, but failed to convert 2 uses of halt_status bit. It did: - if (csr.bits.halt_status != 1) + if ((csr & 0x00020000) != 1) which is wrong, because second version is always true. Fix it. This bug was found by coccinelle (http://coccinelle.lip6.fr/). Signed-off-by:
Marcin Slusarz <marcin.slusarz@gmail.com> Acked-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Aaro Koskinen authored
pSR and pCR fields can be deleted with no changes in the functionality. Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
-
Aaro Koskinen authored
Delete dead code for skipping the video memory sizing. Signed-off-by:
-
Javier Martinez Canillas authored
Due a cleanup in earlier patches, the function fbcon_XGI_sync now does nothing so it has to be removed. This patches removes the unused function. Signed-off-by:
Javier Martinez Canillas <martinez.javier@gmail.com> Acked-by:
-
Javier Martinez Canillas authored
xgifb framebuffer driver had an option to use an accelerator engine that never got used (XGIfb_accel was always 0). An earlier patchset removed the code relevant to the accelerator. Since this spinlock was used only for that code, it can be deleted as well. Signed-off-by:
-
Javier Martinez Canillas authored
xgifb framebuffer driver has an option to use an accelerator engine that never get used (XGIfb_accel is always 0). An earlier patchset remove the code that depends on the accelerator being activated. This patch removes all the references to XGIfb_accel. Signed-off-by:
-
Javier Martinez Canillas authored
xgifb staging driver for XG20, XG21, XG40, XG42 frame buffer device has a accelerator engine that never get used (XGIfb_accel is always 0). Also the driver has a set of defines that hides the synchronization mechanism used to access critical sections and a way to disable spinlocks use at compile time. In a earlier patch all the code that depends on the accelerator being active was deleted because it was dead code. Since the only usage of this synchronization defines were in that dead code, this patch removes all the now unused spinlock conditional compilation logic. Signed-off-by:
-
Javier Martinez Canillas authored
Earlier patch removed code that never got executed because it depended on XGIfb_accel variable value to de distinct than 0. But this variable is always 0 in current driver. That dead code used a set of functions that not remains unused. This patch removes these unused functions. Signed-off-by:
-
Javier Martinez Canillas authored
xgifb staging driver has code that dependens on XGIfb_accel != 0. But as Dan Carpenter noticed, XGIfb_accel value is always 0 in current driver. So there is code that never gets executed. This patch removes this dead code. Signed-off-by:
-
Tomas Winkler authored
use USB_SUBCLASS_AUDIOSTREAMING constant from usb/audio.h instead of 0x02 Cc: Mike Thomas <rmthomas@sciolus.org> Cc: Dan Carpenter <error27@gmail.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Tomas Winkler authored
Cc: Mike Thomas <rmthomas@sciolus.org> Signed-off-by:
-
Tomas Winkler authored
make inputset population to be more compact and readable Cc: Mike Thomas <rmthomas@sciolus.org> Signed-off-by:
-
Tomas Winkler authored
fix some code styles and drop too verbose printouts and non relevant code Cc: Mike Thomas <rmthomas@sciolus.org> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit f2f17948. It should not be putting code into the include/input/ directory, and lots of other people have complained about it. Cc: Tony SIM <chinyeow.sim.xt@renesas.com> Cc: Andrew Chew <achew@nvidia.com> Cc: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
Mike McCormack <mikem@ring3k.org> Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Roland Vossen authored
Increasing robustness of the code, although no problem has been reported in the field. Several code paths were unshielded for multi thread access. Several lock acquisitions have been added to wl_mac80211.c Signed-off-by:
Roland Vossen <rvossen@broadcom.com> Reviewed-by:
Arend van Spriel <arend@broadcom.com> Reviewed-by:
Brett Rudley <brudley@broadcom.com> Signed-off-by:
-
Roland Vossen authored
A spinlock was acquired prior to calling the Mac80211 functions ieee80211_wake_queues() and ieee80211_stop_queues() and Cfg80211 functions wiphy_rfkill_set_hw_state() and wiphy_rfkill_start_polling(). This is not required and could even lead to instability. Therefore the locks were removed. Signed-off-by:
-
