Skip to content

L
linux
Switch branch/tag
  1. 08 May, 2020 8 commits
  3. 07 May, 2020 18 commits
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net · a811c1fa
      Linus Torvalds authored 
      Pull networking fixes from David Miller:

 1) Fix reference count leaks in various parts of batman-adv, from Xiyu
    Yang.

 2) Update NAT checksum even when it is zero, from Guillaume Nault.

 3) sk_psock reference count leak in tls code, also from Xiyu Yang.

 4) Sanity check TCA_FQ_CODEL_DROP_BATCH_SIZE netlink attribute in
    fq_codel, from Eric Dumazet.

 5) Fix panic in choke_reset(), also from Eric Dumazet.

 6) Fix VLAN accel handling in bnxt_fix_features(), from Michael Chan.

 7) Disallow out of range quantum values in sch_sfq, from Eric Dumazet.

 8) Fix crash in x25_disconnect(), from Yue Haibing.

 9) Don't pass pointer to local variable back to the caller in
    nf_osf_hdr_ctx_init(), from Arnd Bergmann.

10) Wireguard should use the ECN decap helper functions, from Toke
    Høiland-Jørgensen.

11) Fix command entry leak in mlx5 driver, from Moshe Shemesh.

12) Fix uninitialized variable access in mptcp's
    subflow_syn_recv_sock(), from Paolo Abeni.

13) Fix unnecessary out-of-order ingress frame ordering in macsec, from
    Scott Dial.

14) IPv6 needs to use a global serial number for dst validation just
    like ipv4, from David Ahern.

15) Fix up PTP_1588_CLOCK deps, from Clay McClure.

16) Missing NLM_F_MULTI flag in gtp driver netlink messages, from
    Yoshiyuki Kurauchi.

17) Fix a regression in that dsa user port errors should not be fatal,
    from Florian Fainelli.

18) Fix iomap leak in enetc driver, from Dejin Zheng.

19) Fix use after free in lec_arp_clear_vccs(), from Cong Wang.

20) Initialize protocol value earlier in neigh code paths when
    generating events, from Roman Mashak.

21) netdev_update_features() must be called with RTNL mutex in macsec
    driver, from Antoine Tenart.

22) Validate untrusted GSO packets even more strictly, from Willem de
    Bruijn.

23) Wireguard decrypt worker needs a cond_resched(), from Jason
    Donenfeld.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits)
  net: flow_offload: skip hw stats check for FLOW_ACTION_HW_STATS_DONT_CARE
  MAINTAINERS: put DYNAMIC INTERRUPT MODERATION in proper order
  wireguard: send/receive: use explicit unlikely branch instead of implicit coalescing
  wireguard: selftests: initalize ipv6 members to NULL to squelch clang warning
  wireguard: send/receive: cond_resched() when processing worker ringbuffers
  wireguard: socket: remove errant restriction on looping to self
  wireguard: selftests: use normal kernel stack size on ppc64
  net: ethernet: ti: am65-cpsw-nuss: fix irqs type
  ionic: Use debugfs_create_bool() to export bool
  net: dsa: Do not leave DSA master with NULL netdev_ops
  net: dsa: remove duplicate assignment in dsa_slave_add_cls_matchall_mirred
  net: stricter validation of untrusted gso packets
  seg6: fix SRH processing to comply with RFC8754
  net: mscc: ocelot: ANA_AUTOAGE_AGE_PERIOD holds a value in seconds, not ms
  net: dsa: ocelot: the MAC table on Felix is twice as large
  net: dsa: sja1105: the PTP_CLK extts input reacts on both edges
  selftests: net: tcp_mmap: fix SO_RCVLOWAT setting
  net: hsr: fix incorrect type usage for protocol variable
  net: macsec: fix rtnl locking issue
  net: mvpp2: cls: Prevent buffer overflow in mvpp2_ethtool_cls_rule_del()
  ...
      a811c1fa
    • Pablo Neira Ayuso's avatar
      net: flow_offload: skip hw stats check for FLOW_ACTION_HW_STATS_DONT_CARE · 16f80360
      Pablo Neira Ayuso authored 
      This patch adds FLOW_ACTION_HW_STATS_DONT_CARE which tells the driver
that the frontend does not need counters, this hw stats type request
never fails. The FLOW_ACTION_HW_STATS_DISABLED type explicitly requests
the driver to disable the stats, however, if the driver cannot disable
counters, it bails out.

TCA_ACT_HW_STATS_* maintains the 1:1 mapping with FLOW_ACTION_HW_STATS_*
except by disabled which is mapped to FLOW_ACTION_HW_STATS_DISABLED
(this is 0 in tc). Add tc_act_hw_stats() to perform the mapping between
TCA_ACT_HW_STATS_* and FLOW_ACTION_HW_STATS_*.

Fixes: 319a1d19 ("flow_offload: check for basic action hw stats type")
Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      16f80360
    • Lukas Bulwahn's avatar
      MAINTAINERS: put DYNAMIC INTERRUPT MODERATION in proper order · b0956956
      Lukas Bulwahn authored 
      Commit 9b038086 ("docs: networking: convert DIM to RST") added a new
file entry to DYNAMIC INTERRUPT MODERATION to the end, and not following
alphabetical order.

So, ./scripts/checkpatch.pl -f MAINTAINERS complains:

  WARNING: Misordered MAINTAINERS entry - list file patterns in alphabetic
  order
  #5966: FILE: MAINTAINERS:5966:
  +F:      lib/dim/
  +F:      Documentation/networking/net_dim.rst

Reorder the file entries to keep MAINTAINERS nicely ordered.
Signed-off-by: default avatarLukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: default avatarJakub Kicinski <kuba@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b0956956
    • David S. Miller's avatar
      Merge branch 'wireguard-fixes' · d3f3e6ac
      David S. Miller authored 
      Jason A. Donenfeld says:

====================
wireguard fixes for 5.7-rc5

With Ubuntu and Debian having backported this into their kernels, we're
finally seeing testing from places we hadn't seen prior, which is nice.
With that comes more fixes:

1) The CI for PPC64 was running with extremely small stacks for 64-bit,
   causing spurious crashes in surprising places.

2) There's was an old leftover routing loop restriction, which no longer
   makes sense given the queueing architecture, and was causing problems
   for people who really did want nested routing.

3) Not yielding our kthread on CONFIG_PREEMPT_VOLUNTARY systems caused
   RCU stalls and other issues, reported by Wang Jian, with the fix
   suggested by Sultan Alsawaf.

4) Clang spewed warnings in a selftest for CONFIG_IPV6=n, reported by
   Arnd Bergmann.

5) A complicated if statement was simplified to an assignment while also
   making the likely/unlikely hinting more correct and simple, and
   increasing readability, suggested by Sultan.

Patches (2) and (3) have Fixes: lines and are probably good candidates
for stable.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d3f3e6ac
    • Jason A. Donenfeld's avatar
      wireguard: send/receive: use explicit unlikely branch instead of implicit coalescing · 243f2148
      Jason A. Donenfeld authored 
      It's very unlikely that send will become true. It's nearly always false
between 0 and 120 seconds of a session, and in most cases becomes true
only between 120 and 121 seconds before becoming false again. So,
unlikely(send) is clearly the right option here.

What happened before was that we had this complex boolean expression
with multiple likely and unlikely clauses nested. Since this is
evaluated left-to-right anyway, the whole thing got converted to
unlikely. So, we can clean this up to better represent what's going on.

The generated code is the same.
Suggested-by: default avatarSultan Alsawaf <sultan@kerneltoast.com>
Signed-off-by: default avatarJason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      243f2148
    • Jason A. Donenfeld's avatar
      wireguard: selftests: initalize ipv6 members to NULL to squelch clang warning · 4fed818e
      Jason A. Donenfeld authored 
      Without setting these to NULL, clang complains in certain
configurations that have CONFIG_IPV6=n:

In file included from drivers/net/wireguard/ratelimiter.c:223:
drivers/net/wireguard/selftest/ratelimiter.c:173:34: error: variable 'skb6' is uninitialized when used here [-Werror,-Wuninitialized]
                ret = timings_test(skb4, hdr4, skb6, hdr6, &test_count);
                                               ^~~~
drivers/net/wireguard/selftest/ratelimiter.c:123:29: note: initialize the variable 'skb6' to silence this warning
        struct sk_buff *skb4, *skb6;
                                   ^
                                    = NULL
drivers/net/wireguard/selftest/ratelimiter.c:173:40: error: variable 'hdr6' is uninitialized when used here [-Werror,-Wuninitialized]
                ret = timings_test(skb4, hdr4, skb6, hdr6, &test_count);
                                                     ^~~~
drivers/net/wireguard/selftest/ratelimiter.c:125:22: note: initialize the variable 'hdr6' to silence this warning
        struct ipv6hdr *hdr6;
                            ^

We silence this warning by setting the variables to NULL as the warning
suggests.
Reported-by: default avatarArnd Bergmann <arnd@arndb.de>
Signed-off-by: default avatarJason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4fed818e
    • Jason A. Donenfeld's avatar
      wireguard: send/receive: cond_resched() when processing worker ringbuffers · 4005f5c3
      Jason A. Donenfeld authored 
      Users with pathological hardware reported CPU stalls on CONFIG_
PREEMPT_VOLUNTARY=y, because the ringbuffers would stay full, meaning
these workers would never terminate. That turned out not to be okay on
systems without forced preemption, which Sultan observed. This commit
adds a cond_resched() to the bottom of each loop iteration, so that
these workers don't hog the core. Note that we don't need this on the
napi poll worker, since that terminates after its budget is expended.
Suggested-by: default avatarSultan Alsawaf <sultan@kerneltoast.com>
Reported-by: default avatarWang Jian <larkwang@gmail.com>
Fixes: e7096c13 ("net: WireGuard secure network tunnel")
Signed-off-by: default avatarJason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4005f5c3
    • Jason A. Donenfeld's avatar
      wireguard: socket: remove errant restriction on looping to self · b673e24a
      Jason A. Donenfeld authored 
      It's already possible to create two different interfaces and loop
packets between them. This has always been possible with tunnels in the
kernel, and isn't specific to wireguard. Therefore, the networking stack
already needs to deal with that. At the very least, the packet winds up
exceeding the MTU and is discarded at that point. So, since this is
already something that happens, there's no need to forbid the not very
exceptional case of routing a packet back to the same interface; this
loop is no different than others, and we shouldn't special case it, but
rather rely on generic handling of loops in general. This also makes it
easier to do interesting things with wireguard such as onion routing.

At the same time, we add a selftest for this, ensuring that both onion
routing works and infinite routing loops do not crash the kernel. We
also add a test case for wireguard interfaces nesting packets and
sending traffic between each other, as well as the loop in this case
too. We make sure to send some throughput-heavy traffic for this use
case, to stress out any possible recursion issues with the locks around
workqueues.

Fixes: e7096c13 ("net: WireGuard secure network tunnel")
Signed-off-by: default avatarJason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b673e24a
    • Jason A. Donenfeld's avatar
      wireguard: selftests: use normal kernel stack size on ppc64 · a0fd7cc8
      Jason A. Donenfeld authored 
      While at some point it might have made sense to be running these tests
on ppc64 with 4k stacks, the kernel hasn't actually used 4k stacks on
64-bit powerpc in a long time, and more interesting things that we test
don't really work when we deviate from the default (16k). So, we stop
pushing our luck in this commit, and return to the default instead of
the minimum.
Signed-off-by: default avatarJason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a0fd7cc8
    • Grygorii Strashko's avatar
      net: ethernet: ti: am65-cpsw-nuss: fix irqs type · 6f5c27f9
      Grygorii Strashko authored 
      The K3 INTA driver, which is source TX/RX IRQs for CPSW NUSS, defines IRQs
triggering type as EDGE by default, but triggering type for CPSW NUSS TX/RX
IRQs has to be LEVEL as the EDGE triggering type may cause unnecessary IRQs
triggering and NAPI scheduling for empty queues. It was discovered with
RT-kernel.

Fix it by explicitly specifying CPSW NUSS TX/RX IRQ type as
IRQF_TRIGGER_HIGH.

Fixes: 93a76530 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: default avatarGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6f5c27f9
    • Geert Uytterhoeven's avatar
      ionic: Use debugfs_create_bool() to export bool · 0735ccc9
      Geert Uytterhoeven authored 
      Currently bool ionic_cq.done_color is exported using
debugfs_create_u8(), which requires a cast, preventing further compiler
checks.

Fix this by switching to debugfs_create_bool(), and dropping the cast.
Signed-off-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: default avatarShannon Nelson <snelson@pensando.io>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0735ccc9
    • Florian Fainelli's avatar
      net: dsa: Do not leave DSA master with NULL netdev_ops · 050569fc
      Florian Fainelli authored 
      When ndo_get_phys_port_name() for the CPU port was added we introduced
an early check for when the DSA master network device in
dsa_master_ndo_setup() already implements ndo_get_phys_port_name(). When
we perform the teardown operation in dsa_master_ndo_teardown() we would
not be checking that cpu_dp->orig_ndo_ops was successfully allocated and
non-NULL initialized.

With network device drivers such as virtio_net, this leads to a NPD as
soon as the DSA switch hanging off of it gets torn down because we are
now assigning the virtio_net device's netdev_ops a NULL pointer.

Fixes: da7b9e9b ("net: dsa: Add ndo_get_phys_port_name() for CPU port")
Reported-by: default avatarAllen Pais <allen.pais@oracle.com>
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Tested-by: default avatarAllen Pais <allen.pais@oracle.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      050569fc
    • Vladimir Oltean's avatar
      net: dsa: remove duplicate assignment in dsa_slave_add_cls_matchall_mirred · 65722159
      Vladimir Oltean authored 
      This was caused by a poor merge conflict resolution on my side. The
"act = &cls->rule->action.entries[0];" assignment was already present in
the code prior to the patch mentioned below.

Fixes: e13c2075 ("net: dsa: refactor matchall mirred action to separate function")
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      65722159
    • Willem de Bruijn's avatar
      net: stricter validation of untrusted gso packets · 9274124f
      Willem de Bruijn authored 
      Syzkaller again found a path to a kernel crash through bad gso input:
a packet with transport header extending beyond skb_headlen(skb).

Tighten validation at kernel entry:

- Verify that the transport header lies within the linear section.

    To avoid pulling linux/tcp.h, verify just sizeof tcphdr.
    tcp_gso_segment will call pskb_may_pull (th->doff * 4) before use.

- Match the gso_type against the ip_proto found by the flow dissector.

Fixes: bfd5f4a3 ("packet: Add GSO/csum offload support.")
Reported-by: default avatarsyzbot <syzkaller@googlegroups.com>
Signed-off-by: default avatarWillem de Bruijn <willemb@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9274124f
    • Ahmed Abdelsalam's avatar
      seg6: fix SRH processing to comply with RFC8754 · 0cb7498f
      Ahmed Abdelsalam authored 
      The Segment Routing Header (SRH) which defines the SRv6 dataplane is defined
in RFC8754.

RFC8754 (section 4.1) defines the SR source node behavior which encapsulates
packets into an outer IPv6 header and SRH. The SR source node encodes the
full list of Segments that defines the packet path in the SRH. Then, the
first segment from list of Segments is copied into the Destination address
of the outer IPv6 header and the packet is sent to the first hop in its path
towards the destination.

If the Segment list has only one segment, the SR source node can omit the SRH
as he only segment is added in the destination address.

RFC8754 (section 4.1.1) defines the Reduced SRH, when a source does not
require the entire SID list to be preserved in the SRH. A reduced SRH does
not contain the first segment of the related SR Policy (the first segment is
the one already in the DA of the IPv6 header), and the Last Entry field is
set to n-2, where n is the number of elements in the SR Policy.

RFC8754 (section 4.3.1.1) defines the SRH processing and the logic to
validate the SRH (S09, S10, S11) which works for both reduced and
non-reduced behaviors.

This patch updates seg6_validate_srh() to validate the SRH as per RFC8754.
Signed-off-by: default avatarAhmed Abdelsalam <ahabdels@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0cb7498f
    • David S. Miller's avatar
      Merge branch 'FDB-fixes-for-Felix-and-Ocelot-switches' · 6e0ddb65
      David S. Miller authored 
      Vladimir Oltean says:

====================
FDB fixes for Felix and Ocelot switches

This series fixes the following problems:
- Dynamically learnt addresses never expiring (neither for Ocelot nor
  for Felix)
- Half of the FDB not visible in 'bridge fdb show' (for Felix only)
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6e0ddb65
    • Vladimir Oltean's avatar
      net: mscc: ocelot: ANA_AUTOAGE_AGE_PERIOD holds a value in seconds, not ms · c0d7eccb
      Vladimir Oltean authored 
      One may notice that automatically-learnt entries 'never' expire, even
though the bridge configures the address age period at 300 seconds.

Actually the value written to hardware corresponds to a time interval
1000 times higher than intended, i.e. 83 hours.

Fixes: a556c76a ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: default avatarFlorian Faineli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c0d7eccb
    • Vladimir Oltean's avatar
      net: dsa: ocelot: the MAC table on Felix is twice as large · 21ce7f3e
      Vladimir Oltean authored 
      When running 'bridge fdb dump' on Felix, sometimes learnt and static MAC
addresses would appear, sometimes they wouldn't.

Turns out, the MAC table has 4096 entries on VSC7514 (Ocelot) and 8192
entries on VSC9959 (Felix), so the existing code from the Ocelot common
library only dumped half of Felix's MAC table. They are both organized
as a 4-way set-associative TCAM, so we just need a single variable
indicating the correct number of rows.

Fixes: 56051948 ("net: dsa: ocelot: add driver for Felix switch family")
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      21ce7f3e
  5. 06 May, 2020 9 commits
  7. 05 May, 2020 5 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7