Xose Vazquez Perez reported boot warnings when NX is disabled on the kernel command line.

__early_set_fixmap() triggers this warning:

  attempted to set unsupported pgprot:    8000000000000163
			       bits:      8000000000000000
			       supported: 7fffffffffffffff

  WARNING: CPU: 0 PID: 0 at arch/x86/include/asm/pgtable.h:537
			    __early_set_fixmap+0xa2/0xff

because it uses __default_kernel_pte_mask to mask out unsupported bits.

Use __supported_pte_mask instead.

Disabling NX on the command line also triggers the NX warning in the page
table mapping check:

  WARNING: CPU: 1 PID: 1 at arch/x86/mm/dump_pagetables.c:262 note_page+0x2ae/0x650
  ....

Make the warning depend on NX set in __supported_pte_mask.
Reported-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Tested-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1904151037530.1729@nanos.tec.linutronix.deSigned-off-by: Ingo Molnar <mingo@kernel.org>

With CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=y, we compile the kernel with
-fdata-sections, which also splits the .bss section.

The new section, with a new .bss.* name, which pattern gets missed by the
main x86 linker script which only expects the '.bss' name. This results
in the discarding of the second part and a too small, truncated .bss
section and an unhappy, non-working kernel.

Use the common BSS_MAIN macro in the linker script to properly capture
and merge all the generated BSS sections.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20190415164956.124067-1-samitolvanen@google.com
[ Extended the changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Mikhail reported a lockdep splat related to the AMD specific ssb_state
lock:

  CPU0                       CPU1
  lock(&st->lock);
                             local_irq_disable();
                             lock(&(&sighand->siglock)->rlock);
                             lock(&st->lock);
  <Interrupt>
     lock(&(&sighand->siglock)->rlock);

  *** DEADLOCK ***

The connection between sighand->siglock and st->lock comes through seccomp,
which takes st->lock while holding sighand->siglock.

Make sure interrupts are disabled when __speculation_ctrl_update() is
invoked via prctl() -> speculation_ctrl_update(). Add a lockdep assert to
catch future offenders.

Fixes: 1f50ddb4 ("x86/speculation: Handle HT correctly on AMD")
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Cc: Thomas Lendacky <thomas.lendacky@amd.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1904141948200.4917@nanos.tec.linutronix.de

When cache allocation is supported and the user creates a new resctrl
resource group, the allocations of the new resource group are
initialized to all regions that it can possibly use. At this time these
regions are all that are shareable by other resource groups as well as
regions that are not currently used. The new resource group's mode is
also initialized to reflect this initialization and set to "shareable".

The new resource group's mode is currently repeatedly initialized within
the loop that configures the hardware with the resource group's default
allocations.

Move the initialization of the resource group's mode outside the
hardware configuration loop. The resource group's mode is now
initialized only once as the final step to reflect that its configured
allocations are "shareable".

Fixes: 95f0b77e ("x86/intel_rdt: Initialize new resource group with sane defaults")
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: pei.p.jia@intel.com
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/1554839629-5448-1-git-send-email-xiaochen.shen@intel.com

There's a number of problems with how arch/x86/include/asm/bitops.h
is currently using assembly constraints for the memory region
bitops are modifying:

1) Use memory clobber in bitops that touch arbitrary memory

Certain bit operations that read/write bits take a base pointer and an
arbitrarily large offset to address the bit relative to that base.
Inline assembly constraints aren't expressive enough to tell the
compiler that the assembly directive is going to touch a specific memory
location of unknown size, therefore we have to use the "memory" clobber
to indicate that the assembly is going to access memory locations other
than those listed in the inputs/outputs.

To indicate that BTR/BTS instructions don't necessarily touch the first
sizeof(long) bytes of the argument, we also move the address to assembly
inputs.

This particular change leads to size increase of 124 kernel functions in
a defconfig build. For some of them the diff is in NOP operations, other
end up re-reading values from memory and may potentially slow down the
execution. But without these clobbers the compiler is free to cache
the contents of the bitmaps and use them as if they weren't changed by
the inline assembly.

2) Use byte-sized arguments for operations touching single bytes.

Passing a long value to ANDB/ORB/XORB instructions makes the compiler
treat sizeof(long) bytes as being clobbered, which isn't the case. This
may theoretically lead to worse code in the case of heavy optimization.

Practical impact:

I've built a defconfig kernel and looked through some of the functions
generated by GCC 7.3.0 with and without this clobber, and didn't spot
any miscompilations.

However there is a (trivial) theoretical case where this code leads to
miscompilation:

  https://lkml.org/lkml/2019/3/28/393

using just GCC 8.3.0 with -O2.  It isn't hard to imagine someone writes
such a function in the kernel someday.

So the primary motivation is to fix an existing misuse of the asm
directive, which happens to work in certain configurations now, but
isn't guaranteed to work under different circumstances.

[ --mingo: Added -stable tag because defconfig only builds a fraction
  of the kernel and the trivial testcase looks normal enough to
  be used in existing or in-development code. ]
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: <stable@vger.kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: James Y Knight <jyknight@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20190402112813.193378-1-glider@google.com
[ Edited the changelog, tidied up one of the defines. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>

The user can control the MBA memory bandwidth in MBps (Mega
Bytes per second) units of the MBA Software Controller (mba_sc)
by using the "mba_MBps" mount option. For details, see
Documentation/x86/resctrl_ui.txt.

However, commit

  23bf1b6b ("kernfs, sysfs, cgroup, intel_rdt: Support fs_context")

changed the mount option name from "mba_MBps" to "mba_mpbs" by mistake.

Change it back from to "mba_MBps" because it is user-visible, and
correct "Opt_mba_mpbs" spelling to "Opt_mba_mbps".

 [ bp: massage commit message. ]

Fixes: 23bf1b6b ("kernfs, sysfs, cgroup, intel_rdt: Support fs_context")
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: dhowells@redhat.com
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: pei.p.jia@intel.com
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/1553896238-22130-1-git-send-email-xiaochen.shen@intel.com

Remove the unused @size argument and move it into a header file, so it
can be inlined.

 [ bp: Massage. ]
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-efi <linux-efi@vger.kernel.org>
Cc: platform-driver-x86@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190328114233.27835-1-mcroce@redhat.com

&cpu_info.x86_capability is __percpu, and the second argument of
x86_this_cpu_test_bit() is expected to be __percpu. Don't cast the
__percpu away and then implicitly add it again. This gets rid of 106
lines of sparse warnings with the kernel config I'm using.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190328154948.152273-1-jannh@google.com

valid_phys_addr_range() is used to sanity check the physical address range
of an operation, e.g., access to /dev/mem. It uses __pa(high_memory)
internally.

If memory is populated at the end of the physical address space, then
__pa(high_memory) is outside of the physical address space because:

   high_memory = (void *)__va(max_pfn * PAGE_SIZE - 1) + 1;

For the comparison in valid_phys_addr_range() this is not an issue, but if
CONFIG_DEBUG_VIRTUAL is enabled, __pa() maps to __phys_addr(), which
verifies that the resulting physical address is within the valid physical
address space of the CPU. So in the case that memory is populated at the
end of the physical address space, this is not true and triggers a
VIRTUAL_BUG_ON().

Use __pa(high_memory - 1) to prevent the conversion from going beyond
the end of valid physical addresses.

Fixes: be62a320 ("x86/mm: Limit mmap() of /dev/mem to valid physical addresses")
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Craig Bergstrom <craigb@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sander Eikelenboom <linux@eikelenboom.it>
Cc: Sean Young <sean@mess.org>

Link: https://lkml.kernel.org/r/20190326001817.15413-2-rcampbell@nvidia.com

Commit ce02ef06 ("x86, retpolines: Raise limit for generating indirect
calls from switch-case") raised the limit under retpolines to 20 switch
cases where gcc would only then start to emit jump tables, and therefore
effectively disabling the emission of slow indirect calls in this area.

After this has been brought to attention to gcc folks [0], Martin Liska
has then fixed gcc to align with clang by avoiding to generate switch jump
tables entirely under retpolines. This is taking effect in gcc starting
from stable version 8.4.0. Given kernel supports compilation with older
versions of gcc where the fix is not being available or backported anymore,
we need to keep the extra KBUILD_CFLAGS around for some time and generally
set the -fno-jump-tables to align with what more recent gcc is doing
automatically today.

More than 20 switch cases are not expected to be fast-path critical, but
it would still be good to align with gcc behavior for versions < 8.4.0 in
order to have consistency across supported gcc versions. vmlinux size is
slightly growing by 0.27% for older gcc. This flag is only set to work
around affected gcc, no change for clang.

  [0] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=86952Suggested-by: Martin Liska <mliska@suse.cz>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Björn Töpel<bjorn.topel@intel.com>
Cc: Magnus Karlsson <magnus.karlsson@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: H.J. Lu <hjl.tools@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Link: https://lkml.kernel.org/r/20190325135620.14882-1-daniel@iogearbox.net

Since commit

  ad67b74d ("printk: hash addresses printed with %p")

at boot "____ptrval____" is printed instead of the trampoline addresses:

  Base memory trampoline at [(____ptrval____)] 99000 size 24576

Remove the print as we don't want to leak kernel addresses and this
statement is not needed anymore.

Fixes: ad67b74d ("printk: hash addresses printed with %p")
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190326203046.20787-1-mcroce@redhat.com

The declarations related to immovable memory handling are out of the
BOOT_COMPRESSED_MISC_H #ifdef scope, wrap them inside.
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Chao Fan <fanc.fnst@cn.fujitsu.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190304055546.18566-1-bhe@redhat.com

Variable "struct rdt_resource *r" is set but not used. So remove it.
Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1552152584-26087-1-git-send-email-peng.hao2@zte.com.cn

Pull ext4 fixes from Ted Ts'o:
 "Miscellaneous ext4 bug fixes for 5.1"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: prohibit fstrim in norecovery mode
  ext4: cleanup bh release code in ext4_ind_remove_space()
  ext4: brelse all indirect buffer in ext4_ind_remove_space()
  ext4: report real fs size after failed resize
  ext4: add missing brelse() in add_new_gdb_meta_bg()
  ext4: remove useless ext4_pin_inode()
  ext4: avoid panic during forced reboot
  ext4: fix data corruption caused by unaligned direct AIO
  ext4: fix NULL pointer dereference while journal is aborted

Pull scheduler updates from Thomas Gleixner:
 "Third more careful attempt for this set of fixes:

   - Prevent a 32bit math overflow in the cpufreq code

   - Fix a buffer overflow when scanning the cgroup2 cpu.max property

   - A set of fixes for the NOHZ scheduler logic to prevent waking up
     CPUs even if the capacity of the busy CPUs is sufficient along with
     other tweaks optimizing the behaviour for asymmetric systems
     (big/little)"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Skip LLC NOHZ logic for asymmetric systems
  sched/fair: Tune down misfit NOHZ kicks
  sched/fair: Comment some nohz_balancer_kick() kick conditions
  sched/core: Fix buffer overflow in cgroup2 property cpu.max
  sched/cpufreq: Fix 32-bit math overflow

Pull perf updates from Thomas Gleixner:
 "A larger set of perf updates.

  Not all of them are strictly fixes, but that's solely the tip
  maintainers fault as they let the timely -rc1 pull request fall
  through the cracks for various reasons including travel. So I'm
  sending this nevertheless because rebasing and distangling fixes and
  updates would be a mess and risky as well. As of tomorrow, a strict
  fixes separation is happening again. Sorry for the slip-up.

  Kernel:

   - Handle RECORD_MMAP vs. RECORD_MMAP2 correctly so different
     consumers of the mmap event get what they requested.

  Tools:

   - A larger set of updates to perf record/report/scripts vs. time
     stamp handling

   - More Python3 fixups

   - A pile of memory leak plumbing

   - perf BPF improvements and fixes

   - Finalize the perf.data directory storage"

[ Note: the kernel part is strictly a fix, the updates are purely to
  tooling       - Linus ]

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
  perf bpf: Show more BPF program info in print_bpf_prog_info()
  perf bpf: Extract logic to create program names from perf_event__synthesize_one_bpf_prog()
  perf tools: Save bpf_prog_info and BTF of new BPF programs
  perf evlist: Introduce side band thread
  perf annotate: Enable annotation of BPF programs
  perf build: Check what binutils's 'disassembler()' signature to use
  perf bpf: Process PERF_BPF_EVENT_PROG_LOAD for annotation
  perf symbols: Introduce DSO_BINARY_TYPE__BPF_PROG_INFO
  perf feature detection: Add -lopcodes to feature-libbfd
  perf top: Add option --no-bpf-event
  perf bpf: Save BTF information as headers to perf.data
  perf bpf: Save BTF in a rbtree in perf_env
  perf bpf: Save bpf_prog_info information as headers to perf.data
  perf bpf: Save bpf_prog_info in a rbtree in perf_env
  perf bpf: Make synthesize_bpf_events() receive perf_session pointer instead of perf_tool
  perf bpf: Synthesize bpf events with bpf_program__get_prog_info_linear()
  bpftool: use bpf_program__get_prog_info_linear() in prog.c:do_dump()
  tools lib bpf: Introduce bpf_program__get_prog_info_linear()
  perf record: Replace option --bpf-event with --no-bpf-event
  perf tests: Fix a memory leak in test__perf_evsel__tp_sched_test()
  ...

Pull x86 fixes from Thomas Gleixner:
 "A set of x86 fixes:

   - Prevent potential NULL pointer dereferences in the HPET and HyperV
     code

   - Exclude the GART aperture from /proc/kcore to prevent kernel
     crashes on access

   - Use the correct macros for Cyrix I/O on Geode processors

   - Remove yet another kernel address printk leak

   - Announce microcode reload completion as requested by quite some
     people. Microcode loading has become popular recently.

   - Some 'Make Clang' happy fixlets

   - A few cleanups for recently added code"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/gart: Exclude GART aperture from kcore
  x86/hw_breakpoints: Make default case in hw_breakpoint_arch_parse() return an error
  x86/mm/pti: Make local symbols static
  x86/cpu/cyrix: Remove {get,set}Cx86_old macros used for Cyrix processors
  x86/cpu/cyrix: Use correct macros for Cyrix calls on Geode processors
  x86/microcode: Announce reload operation's completion
  x86/hyperv: Prevent potential NULL pointer dereference
  x86/hpet: Prevent potential NULL pointer dereference
  x86/lib: Fix indentation issue, remove extra tab
  x86/boot: Restrict header scope to make Clang happy
  x86/mm: Don't leak kernel addresses
  x86/cpufeature: Fix various quality problems in the <asm/cpu_device_hd.h> header

Pull timer fixes from Thomas Gleixner:
 "A set of small fixes plus the removal of stale board support code:

   - Remove the board support code from the clpx711x clocksource driver.
     This change had fallen through the cracks and I'm sending it now
     rather than dealing with people who want to improve that stale code
     for 3 month.

   - Use the proper clocksource mask on RICSV

   - Make local scope functions and variables static"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/clps711x: Remove board support
  clocksource/drivers/riscv: Fix clocksource mask
  clocksource/drivers/mips-gic-timer: Make gic_compare_irqaction static
  clocksource/drivers/timer-ti-dm: Make omap_dm_timer_set_load_start() static
  clocksource/drivers/tcb_clksrc: Make tc_clksrc_suspend/resume() static
  clocksource/drivers/clps711x: Make clps711x_clksrc_init() static
  time/jiffies: Make refined_jiffies static

Pull locking fixes from Thomas Gleixner:
 "Two small fixes:

   - Cure a recently introduces error path hickup which tries to
     unregister a not registered lockdep key in te workqueue code

   - Prevent unaligned cmpxchg() crashes in the robust list handling
     code by sanity checking the user space supplied futex pointer"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Ensure that futex address is aligned in handle_futex_death()
  workqueue: Only unregister a registered lockdep key

Pull irq fixes from Thomas Gleixner:
 "A set of fixes for the interrupt subsystem:

   - Remove secondary GIC support on systems w/o device-tree support

   - A set of small fixlets in various irqchip drivers

   - static and fall-through annotations

   - Kernel doc and typo fixes"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Mark expected switch case fall-through
  genirq/devres: Remove excess parameter from kernel doc
  irqchip/irq-mvebu-sei: Make mvebu_sei_ap806_caps static
  irqchip/mbigen: Don't clear eventid when freeing an MSI
  irqchip/stm32: Don't set rising configuration registers at init
  irqchip/stm32: Don't clear rising/falling config registers at init
  dt-bindings: irqchip: renesas-irqc: Document r8a774c0 support
  irqchip/mmp: Make mmp_irq_domain_ops static
  irqchip/brcmstb-l2: Make two init functions static
  genirq: Fix typo in comment of IRQD_MOVE_PCNTXT
  irqchip/gic-v3-its: Fix comparison logic in lpi_range_cmp
  irqchip/gic: Drop support for secondary GIC in non-DT systems
  irqchip/imx-irqsteer: Fix of_property_read_u32() error handling

Pull core fixes from Thomas Gleixner:
 "Two small fixes:

   - Move the large objtool_file struct off the stack so objtool works
     in setups with a tight stack limit.

   - Make a few variables static in the watchdog core code"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  watchdog/core: Make variables static
  objtool: Move objtool_file struct off the stack

Pull thermal management fixes from Zhang Rui:

 - Fix a wrong __percpu structure declaration in intel_powerclamp driver
   (Luc Van Oostenryck)

 - Fix truncated name of the idle injection kthreads created by
   intel_powerclamp driver (Zhang Rui)

 - Fix the missing UUID supports in int3400 thermal driver (Matthew
   Garrett)

 - Fix a crash when accessing the debugfs of bcm2835 SoC thermal driver
   (Phil Elwell)

 - A couple of trivial fixes/cleanups in some SoC thermal drivers

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  thermal/intel_powerclamp: fix truncated kthread name
  thermal: mtk: Allocate enough space for mtk_thermal.
  thermal/int340x_thermal: fix mode setting
  thermal/int340x_thermal: Add additional UUIDs
  thermal: cpu_cooling: Remove unused cur_freq variable
  thermal: bcm2835: Fix crash in bcm2835_thermal_debugfs
  thermal: samsung: Fix incorrect check after code merge
  thermal/intel_powerclamp: fix __percpu declaration of worker_data

Pull smb3 fixes from Steve French:

 - two fixes for stable for guest mount problems with smb3.1.1

 - two fixes for crediting (SMB3 flow control) on resent requests

 - a byte range lock leak fix

 - two fixes for incorrect rc mappings

* tag '5.1-rc1-cifs-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module version number
  SMB3: Fix SMB3.1.1 guest mounts to Samba
  cifs: Fix slab-out-of-bounds when tracing SMB tcon
  cifs: allow guest mounts to work for smb3.11
  fix incorrect error code mapping for OBJECTID_NOT_FOUND
  cifs: fix that return -EINVAL when do dedupe operation
  CIFS: Fix an issue with re-sending rdata when transport returning -EAGAIN
  CIFS: Fix an issue with re-sending wdata when transport returning -EAGAIN

Pull auxdisplay updates from Miguel Ojeda:
 "A few fixes and improvements for auxdisplay:

   - Series to fix a memory leak in hd44780 while introducing
     charlcd_free(). From Andy Shevchenko

   - Series to clean up the Kconfig menus and a couple of improvements
     for charlcd. From Mans Rullgard"

* tag 'auxdisplay-for-linus-v5.1-rc2' of git://github.com/ojeda/linux:
  auxdisplay: charlcd: make backlight initial state configurable
  auxdisplay: charlcd: simplify init message display
  auxdisplay: deconfuse configuration
  auxdisplay: hd44780: Convert to use charlcd_free()
  auxdisplay: panel: Convert to use charlcd_free()
  auxdisplay: charlcd: Introduce charlcd_free() helper
  auxdisplay: charlcd: Move to_priv() to charlcd namespace
  auxdisplay: hd44780: Fix memory leak on ->remove()

Pull SCSI fixes from James Bottomley:
 "Six fixes to four drivers and two core fixes.

  One core fix simply corrects a missed destroy_rcu_head() but the other
  is hopefully the end of an ongoing effort to make suspend/resume play
  nicely with scsi quiesce"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ibmvscsi: Fix empty event pool access during host removal
  scsi: ibmvscsi: Protect ibmvscsi_head from concurrent modificaiton
  scsi: hisi_sas: Add softreset in hisi_sas_I_T_nexus_reset()
  scsi: qla2xxx: Fix NULL pointer crash due to stale CPUID
  scsi: qla2xxx: Fix FC-AL connection target discovery
  scsi: core: Avoid that a kernel warning appears during system resume
  scsi: core: Also call destroy_rcu_head() for passthrough requests
  scsi: iscsi: flush running unbind operations when removing a session

Since board support for the CLPS711X platform was removed,
remove the board support from the clps711x-timer driver.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lkml.kernel.org/r/20181220111626.17140-1-shc_work@mail.ru

Pull io_uring fixes and improvements from Jens Axboe:
 "The first five in this series are heavily inspired by the work Al did
  on the aio side to fix the races there.

  The last two re-introduce a feature that was in io_uring before it got
  merged, but which I pulled since we didn't have a good way to have
  BVEC iters that already have a stable reference. These aren't
  necessarily related to block, it's just how io_uring pins fixed
  buffers"

* tag 'io_uring-20190323' of git://git.kernel.dk/linux-block:
  block: add BIO_NO_PAGE_REF flag
  iov_iter: add ITER_BVEC_FLAG_NO_REF flag
  io_uring: mark me as the maintainer
  io_uring: retry bulk slab allocs as single allocs
  io_uring: fix poll races
  io_uring: fix fget/fput handling
  io_uring: add prepped flag
  io_uring: make io_read/write return an integer
  io_uring: use regular request ref counts

Pull block fixes from Jens Axboe:
 "A set of fixes/changes that should go into this series. This contains:

   - Kernel doc / comment updates (Bart, Shenghui)

   - Un-export of core-only used function (Bart)

   - Fix race on loop file access (Dongli)

   - pf/pcd queue cleanup fixes (me)

   - Use appropriate helper for RESTART bit set (Yufen)

   - Use named identifier for classic poll (Yufen)"

* tag 'for-linus-20190323' of git://git.kernel.dk/linux-block:
  sbitmap: trivial - update comment for sbitmap_deferred_clear_bit
  blkcg: Fix kernel-doc warnings
  blk-iolatency: #include "blk.h"
  block: Unexport blk_mq_add_to_requeue_list()
  block: add BLK_MQ_POLL_CLASSIC for hybrid poll and return EINVAL for unexpected value
  blk-mq: remove unused 'nr_expired' from blk_mq_hw_ctx
  loop: access lo_backing_file only when the loop device is Lo_bound
  blk-mq: use blk_mq_sched_mark_restart_hctx to set RESTART
  paride/pcd: cleanup queues when detection fails
  paride/pf: cleanup queues when detection fails

Pull ceph fixes from Ilya Dryomov:
 "A follow up for the new alloc_size logic and a blacklisting fix,
  marked for stable"

* tag 'ceph-for-5.1-rc2' of git://github.com/ceph/ceph-client:
  rbd: drop wait_for_latest_osdmap()
  libceph: wait for latest osdmap in ceph_monc_blacklist_add()
  rbd: set io_min, io_opt and discard_granularity to alloc_size

The ext4 fstrim implementation uses the block bitmaps to find free space
that can be discarded.  If we haven't replayed the journal, the bitmaps
will be stale and we absolutely *cannot* use stale metadata to zap the
underlying storage.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Currently, we are releasing the indirect buffer where we are done with
it in ext4_ind_remove_space(), so we can see the brelse() and
BUFFER_TRACE() everywhere.  It seems fragile and hard to read, and we
may probably forget to release the buffer some day.  This patch cleans
up the code by putting of the code which releases the buffers to the
end of the function.
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>

All indirect buffers get by ext4_find_shared() should be released no
mater the branch should be freed or not. But now, we forget to release
the lower depth indirect buffers when removing space from the same
higher depth indirect block. It will lead to buffer leak and futher
more, it may lead to quota information corruption when using old quota,
consider the following case.

 - Create and mount an empty ext4 filesystem without extent and quota
   features,
 - quotacheck and enable the user & group quota,
 - Create some files and write some data to them, and then punch hole
   to some files of them, it may trigger the buffer leak problem
   mentioned above.
 - Disable quota and run quotacheck again, it will create two new
   aquota files and write the checked quota information to them, which
   probably may reuse the freed indirect block(the buffer and page
   cache was not freed) as data block.
 - Enable quota again, it will invoke
   vfs_load_quota_inode()->invalidate_bdev() to try to clean unused
   buffers and pagecache. Unfortunately, because of the buffer of quota
   data block is still referenced, quota code cannot read the up to date
   quota info from the device and lead to quota information corruption.

This problem can be reproduced by xfstests generic/231 on ext3 file
system or ext4 file system without extent and quota features.

This patch fix this problem by releasing the missing indirect buffers,
in ext4_ind_remove_space().
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org

In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.

With -Wimplicit-fallthrough added to CFLAGS:

 kernel/irq/manage.c: In function ‘irq_do_set_affinity’:
 kernel/irq/manage.c:198:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
   cpumask_copy(desc->irq_common_data.affinity, mask);
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 kernel/irq/manage.c:199:2: note: here
   case IRQ_SET_MASK_OK_NOCOPY:
   ^~~~

Annotate it.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20190228213714.GA9246@embeddedor

For all riscv architectures (RV32, RV64 and RV128), the clocksource
is a 64 bit incrementing counter.

Fix the clock source mask accordingly.

Tested on both 64bit and 32 bit virt machine in QEMU.

Fixes: 62b01943 ("clocksource: new RISC-V SBI timer driver")
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: linux-riscv@lists.infradead.org
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Anup Patel <Anup.Patel@wdc.com>
Cc: Damien Le Moal <Damien.LeMoal@wdc.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190322215411.19362-1-atish.patra@wdc.com

On machines where the GART aperture is mapped over physical RAM,
/proc/kcore contains the GART aperture range. Accessing the GART range via
/proc/kcore results in a kernel crash.

vmcore used to have the same issue, until it was fixed with commit
2a3e83c6 ("x86/gart: Exclude GART aperture from vmcore")', leveraging
existing hook infrastructure in vmcore to let /proc/vmcore return zeroes
when attempting to read the aperture region, and so it won't read from the
actual memory.

Apply the same workaround for kcore. First implement the same hook
infrastructure for kcore, then reuse the hook functions introduced in the
previous vmcore fix. Just with some minor adjustment, rename some functions
for more general usage, and simplify the hook infrastructure a bit as there
is no module usage yet.
Suggested-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jiri Bohac <jbohac@suse.cz>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Dave Young <dyoung@redhat.com>
Link: https://lkml.kernel.org/r/20190308030508.13548-1-kasong@redhat.com

To 2.19
Signed-off-by: Steve French <stfrench@microsoft.com>

Workaround problem with Samba responses to SMB3.1.1
null user (guest) mounts.  The server doesn't set the
expected flag in the session setup response so we have
to do a similar check to what is done in smb3_validate_negotiate
where we also check if the user is a null user (but not sec=krb5
since username might not be passed in on mount for Kerberos case).

Note that the commit below tightened the conditions and forced signing
for the SMB2-TreeConnect commands as per MS-SMB2.
However, this should only apply to normal user sessions and not for
cases where there is no user (even if server forgets to set the flag
in the response) since we don't have anything useful to sign with.
This is especially important now that the more secure SMB3.1.1 protocol
is in the default dialect list.

An earlier patch ("cifs: allow guest mounts to work for smb3.11") fixed
the guest mounts to Windows.

    Fixes: 6188f28b ("Tree connect for SMB3.1.1 must be signed for non-encrypted shares")
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

This patch fixes the following KASAN report:

[  779.044746] BUG: KASAN: slab-out-of-bounds in string+0xab/0x180
[  779.044750] Read of size 1 at addr ffff88814f327968 by task trace-cmd/2812

[  779.044756] CPU: 1 PID: 2812 Comm: trace-cmd Not tainted 5.1.0-rc1+ #62
[  779.044760] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-0-ga698c89-prebuilt.qemu.org 04/01/2014
[  779.044761] Call Trace:
[  779.044769]  dump_stack+0x5b/0x90
[  779.044775]  ? string+0xab/0x180
[  779.044781]  print_address_description+0x6c/0x23c
[  779.044787]  ? string+0xab/0x180
[  779.044792]  ? string+0xab/0x180
[  779.044797]  kasan_report.cold.3+0x1a/0x32
[  779.044803]  ? string+0xab/0x180
[  779.044809]  string+0xab/0x180
[  779.044816]  ? widen_string+0x160/0x160
[  779.044822]  ? vsnprintf+0x5bf/0x7f0
[  779.044829]  vsnprintf+0x4e7/0x7f0
[  779.044836]  ? pointer+0x4a0/0x4a0
[  779.044841]  ? seq_buf_vprintf+0x79/0xc0
[  779.044848]  seq_buf_vprintf+0x62/0xc0
[  779.044855]  trace_seq_printf+0x113/0x210
[  779.044861]  ? trace_seq_puts+0x110/0x110
[  779.044867]  ? trace_raw_output_prep+0xd8/0x110
[  779.044876]  trace_raw_output_smb3_tcon_class+0x9f/0xc0
[  779.044882]  print_trace_line+0x377/0x890
[  779.044888]  ? tracing_buffers_read+0x300/0x300
[  779.044893]  ? ring_buffer_read+0x58/0x70
[  779.044899]  s_show+0x6e/0x140
[  779.044906]  seq_read+0x505/0x6a0
[  779.044913]  vfs_read+0xaf/0x1b0
[  779.044919]  ksys_read+0xa1/0x130
[  779.044925]  ? kernel_write+0xa0/0xa0
[  779.044931]  ? __do_page_fault+0x3d5/0x620
[  779.044938]  do_syscall_64+0x63/0x150
[  779.044944]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  779.044949] RIP: 0033:0x7f62c2c2db31
[ 779.044955] Code: fe ff ff 48 8d 3d 17 9e 09 00 48 83 ec 08 e8 96 02
02 00 66 0f 1f 44 00 00 8b 05 fa fc 2c 00 48 63 ff 85 c0 75 13 31 c0
0f 05 <48> 3d 00 f0 ff ff 77 57 f3 c3 0f 1f 44 00 00 55 53 48 89 d5 48
89
[  779.044958] RSP: 002b:00007ffd6e116678 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[  779.044964] RAX: ffffffffffffffda RBX: 0000560a38be9260 RCX: 00007f62c2c2db31
[  779.044966] RDX: 0000000000002000 RSI: 00007ffd6e116710 RDI: 0000000000000003
[  779.044966] RDX: 0000000000002000 RSI: 00007ffd6e116710 RDI: 0000000000000003
[  779.044969] RBP: 00007f62c2ef5420 R08: 0000000000000000 R09: 0000000000000003
[  779.044972] R10: ffffffffffffffa8 R11: 0000000000000246 R12: 00007ffd6e116710
[  779.044975] R13: 0000000000002000 R14: 0000000000000d68 R15: 0000000000002000

[  779.044981] Allocated by task 1257:
[  779.044987]  __kasan_kmalloc.constprop.5+0xc1/0xd0
[  779.044992]  kmem_cache_alloc+0xad/0x1a0
[  779.044997]  getname_flags+0x6c/0x2a0
[  779.045003]  user_path_at_empty+0x1d/0x40
[  779.045008]  do_faccessat+0x12a/0x330
[  779.045012]  do_syscall_64+0x63/0x150
[  779.045017]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

[  779.045019] Freed by task 1257:
[  779.045023]  __kasan_slab_free+0x12e/0x180
[  779.045029]  kmem_cache_free+0x85/0x1b0
[  779.045034]  filename_lookup.part.70+0x176/0x250
[  779.045039]  do_faccessat+0x12a/0x330
[  779.045043]  do_syscall_64+0x63/0x150
[  779.045048]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

[  779.045052] The buggy address belongs to the object at ffff88814f326600
which belongs to the cache names_cache of size 4096
[  779.045057] The buggy address is located 872 bytes to the right of
4096-byte region [ffff88814f326600, ffff88814f327600)
[  779.045058] The buggy address belongs to the page:
[  779.045062] page:ffffea00053cc800 count:1 mapcount:0 mapping:ffff88815b191b40 index:0x0 compound_mapcount: 0
[  779.045067] flags: 0x200000000010200(slab|head)
[  779.045075] raw: 0200000000010200 dead000000000100 dead000000000200 ffff88815b191b40
[  779.045081] raw: 0000000000000000 0000000000070007 00000001ffffffff 0000000000000000
[  779.045083] page dumped because: kasan: bad access detected

[  779.045085] Memory state around the buggy address:
[  779.045089]  ffff88814f327800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  779.045093]  ffff88814f327880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  779.045097] >ffff88814f327900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  779.045099]                                                           ^
[  779.045103]  ffff88814f327980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  779.045107]  ffff88814f327a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  779.045109] ==================================================================
[  779.045110] Disabling lock debugging due to kernel taint

Correctly assign tree name str for smb3_tcon event.
Signed-off-by: Paulo Alcantara (SUSE) <paulo@paulo.ac>
Signed-off-by: Steve French <stfrench@microsoft.com>

Fix Guest/Anonymous sessions so that they work with SMB 3.11.

The commit noted below tightened the conditions and forced signing for
the SMB2-TreeConnect commands as per MS-SMB2.
However, this should only apply to normal user sessions and not for
Guest/Anonumous sessions.

Fixes: 6188f28b ("Tree connect for SMB3.1.1 must be signed for non-encrypted shares")
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>