- 03 Apr, 2018 8 commits
-
-
Changbin Du authored
There is a redundant ')' at the tail of each event. So remove it. $ sudo perf trace --no-syscalls -e 'kmem:*' -a 899.342 kmem:kfree:(vfs_writev+0xb9) call_site=ffffffff9c453979 ptr=(nil)) 899.344 kmem:kfree:(___sys_recvmsg+0x188) call_site=ffffffff9c9b8b88 ptr=(nil)) Signed-off-by:
Changbin Du <changbin.du@intel.com> Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1520937601-24952-1-git-send-email-changbin.du@intel.comSigned-off-by:
-
Arnaldo Carvalho de Melo authored
To match the recently added event header information to --tui, e.g.: # perf annotate --ignore-vmlinux --stdio2 _raw_spin_lock_irqsave Samples: 128 of event 'cycles:ppp', 4000 Hz, Event count (approx.): 48617682 _raw_spin_lock_irqsave() /proc/kcore 0.78 nop 7.03 push %rbx 3.12 pushfq 6.25 pop %rax nop mov %rax,%rbx 3.12 cli nop xor %eax,%eax mov $0x1,%edx 79.69 lock cmpxchg %edx,(%rdi) test %eax,%eax ↓ jne 2b mov %rbx,%rax pop %rbx ← retq 2b: mov %eax,%esi → callq *ffffffffb30eaed0 mov %rbx,%rax pop %rbx ← retq # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Martin Liška <mliska@suse.cz> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-ujy46x7cldyhyxelyf2b9quy@git.kernel.orgSigned-off-by: -
Arnaldo Carvalho de Melo authored
So at the top we'll have two lines, like this, from 'perf report': # perf report --group --ignore-vmlinux ===================================================================================================== Samples: 46 of events 'cycles', 4000 Hz, Event count (approx.): 5154895 _raw_spin_lock_irqsave /proc/kcore Percent │ nop │ push %rbx 0.00 14.29 0.00 │ pushfq 9.09 0.00 0.00 │ pop %rax 9.09 0.00 20.00 │ nop │ mov %rax,%rbx │ cli 4.55 7.14 0.00 │ nop │ xor %eax,%eax │ mov $0x1,%edx │ lock cmpxchg %edx,(%rdi) 77.27 78.57 70.00 │ test %eax,%eax │ ↓ jne 2b │ mov %rbx,%rax 0.00 0.00 10.00 │ pop %rbx │ ← retq │2b: mov %eax,%esi │ → callq queued_spin_lock_slowpath │ mov %rbx,%rax │ pop %rbx Press 'h' for help on│key bindings ===================================================================================================== 9.09 + 9.09 + 4.55 + 77.27 = 100 14.29 + 7.14 + 78.57 = 100 20 + 70 + 10 = 100 We can do the math by using 't' to toggle from 'percent' to nr ===================================================================================================== Samples: 46 of events 'cycles', 4000 Hz, Event count (approx.): 5154895 _raw_spin_lock_irqsave /proc/kcore Period │ nop │ push %rbx 0 79273 0 │ pushfq 190455 0 0 │ pop %rax 198038 0 3045 │ nop │ mov %rax,%rbx │ cli 217233 32562 0 │ nop │ xor %eax,%eax │ mov $0x1,%edx │ lock cmpxchg %edx,(%rdi) 3421649 979174 28273 │ test %eax,%eax │ ↓ jne 2b │ mov %rbx,%rax 0 0 5193 │ pop %rbx │ ← retq │2b: mov %eax,%esi │ → callq queued_spin_lock_slowpath │ mov %rbx,%rax │ pop %rbx Press 'h' for help on│key bindings ===================================================================================================== 79273 + 190455 + 198038 + 3045 + 217233 + 32562 + 3421649 + 979174 + 28273 + 5193 = 5154895 Or number of samples: ===================================================================================================== ooSamples: 46 of events 'cycles', 4000 Hz, Event count (approx.): 5154895 _raw_spin_lock_irqsave /proc/kcore Samples │ nop │ push %rbx 0 2 0 │ pushfq 2 0 0 │ pop %rax 2 0 2 │ nop │ mov %rax,%rbx │ cli 1 1 0 │ nop │ xor %eax,%eax │ mov $0x1,%edx │ lock cmpxchg %edx,(%rdi) 17 11 7 │ test %eax,%eax │ ↓ jne 2b │ mov %rbx,%rax 0 0 1 │ pop %rbx │ ← retq │2b: mov %eax,%esi │ → callq queued_spin_lock_slowpath │ mov %rbx,%rax │ pop %rbx Press 'h' for help on key bindings ===================================================================================================== 2 + 2 + 2 + 2 + 1 + 1 + 17 + 11 + 7 + 1 = 46 Suggested-by:Martin Liška <mliska@suse.cz> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196935 Link: https://lkml.kernel.org/n/tip-ezccyxld50wtwyt66np6aomo@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
To print a string using the total period (nr_events) and the number of samples for a given annotation, i.e. for a given symbol, the counterpart to hists__scnprintf_samples_period(), that is for all the samples in a session (be it a live session, think 'perf top' or a perf.data file, think 'perf report'). Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Martin Liška <mliska@suse.cz> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196935 Link: https://lkml.kernel.org/n/tip-goj2wu4fxutc8vd46mw3yg14@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
This will be useful for the annotate browser as well, that wants to have extra title lines, i.e. the current ui_browser unconditionally reserves the first line for a browser title and the last one for status messages. But some browsers, like the buckets one (hists browser) needs extra lines to show headers, allowing it to be shown or not, press 'H' in 'perf top' or 'perf report' to see this feature. So move that logic to the core ui_browser used by the hists_browser ('perf top' and 'perf report' main interface) so that it can be used by the annotate browser too. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Martin Liška <mliska@suse.cz> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196935 Link: https://lkml.kernel.org/n/tip-r38xm3ut37ulbg1o5tn5iise@git.kernel.orgSigned-off-by: -
Arnaldo Carvalho de Melo authored
The previous patch made this function useful to non-TUI parts of the tools, but left it where the function from what it was carved, so that the patch showed more clearly the process. Now just move it outside the TUI parts so that we can finally use it, even when the TUI code doesn't get built/linked. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Martin Liška <mliska@suse.cz> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196935 Link: https://lkml.kernel.org/n/tip-hqj7hvcr3mu5lvcqp3cssio6@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
That is not use any struct hists_browser internals, so that it can be shared with the other UIs and tools. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Martin Liška <mliska@suse.cz> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196935 Link: https://lkml.kernel.org/n/tip-w8mczjnqnbcj9yzfkv9ja6ro@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
Rename it to hists_browser__scnprintf_title() to better reflect that it provides a scnprintf-like function operating on a hists_browser instance. This paves the way to have a non-hists_browser specific function to scnprintf format a title with per evsel information to use in other tools or UIs. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Martin Liška <mliska@suse.cz> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196935 Link: https://lkml.kernel.org/n/tip-sntpyzxsnme9jvuz2qntwoh2@git.kernel.orgSigned-off-by:
-
- 02 Apr, 2018 9 commits
-
-
Jin Yao authored
Since a new option '--build-options' is created for 'perf version', so we need to document it. Signed-off-by:
Jin Yao <yao.jin@linux.intel.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1522402036-22915-7-git-send-email-yao.jin@linux.intel.comSigned-off-by:
-
Jin Yao authored
We keep having bug reports that when users build perf on their own, but they don't install some needed libraries such as libelf, libbfd/libibery. The perf can build, but it is missing important functionality. This patch provides a new option '-vv' for perf which will print the compiled-in status of libraries. The 'perf -vv' is mapped to 'perf version --build-options'. For example: $ ./perf -vv perf version 4.13.rc5.g6727c5 dwarf: [ on ] # HAVE_DWARF_SUPPORT dwarf_getlocations: [ on ] # HAVE_DWARF_GETLOCATIONS_SUPPORT glibc: [ on ] # HAVE_GLIBC_SUPPORT gtk2: [ on ] # HAVE_GTK2_SUPPORT libaudit: [ OFF ] # HAVE_LIBAUDIT_SUPPORT libbfd: [ on ] # HAVE_LIBBFD_SUPPORT libelf: [ on ] # HAVE_LIBELF_SUPPORT libnuma: [ on ] # HAVE_LIBNUMA_SUPPORT numa_num_possible_cpus: [ on ] # HAVE_LIBNUMA_SUPPORT libperl: [ on ] # HAVE_LIBPERL_SUPPORT libpython: [ on ] # HAVE_LIBPYTHON_SUPPORT libslang: [ on ] # HAVE_SLANG_SUPPORT libcrypto: [ on ] # HAVE_LIBCRYPTO_SUPPORT libunwind: [ on ] # HAVE_LIBUNWIND_SUPPORT libdw-dwarf-unwind: [ on ] # HAVE_DWARF_SUPPORT zlib: [ on ] # HAVE_ZLIB_SUPPORT lzma: [ on ] # HAVE_LZMA_SUPPORT get_cpuid: [ on ] # HAVE_AUXTRACE_SUPPORT bpf: [ on ] # HAVE_LIBBPF_SUPPORT v3: One bug is found in v2. It didn't process the option like '-vabc' correctly. Fix this bug. v2: Use a global variable version_verbose to record the number of 'v'. Signed-off-by: -
Jin Yao authored
This patch checks the values passed by CFLAGS (-DHAVE_XXX) and then print the status of libraries. For example, if HAVE_DWARF_SUPPORT is defined, that means the library "dwarf" is compiled-in. The patch will print the status "on" for this library otherwise it print the status "OFF". A new option '--build-options' created for 'perf version' supports the printing of library status. For example: $ ./perf version --build-options or ./perf --version --build-options or ./perf -v --build-options perf version 4.13.rc5.g6727c5 dwarf: [ on ] # HAVE_DWARF_SUPPORT dwarf_getlocations: [ on ] # HAVE_DWARF_GETLOCATIONS_SUPPORT glibc: [ on ] # HAVE_GLIBC_SUPPORT gtk2: [ on ] # HAVE_GTK2_SUPPORT libaudit: [ OFF ] # HAVE_LIBAUDIT_SUPPORT libbfd: [ on ] # HAVE_LIBBFD_SUPPORT libelf: [ on ] # HAVE_LIBELF_SUPPORT libnuma: [ on ] # HAVE_LIBNUMA_SUPPORT numa_num_possible_cpus: [ on ] # HAVE_LIBNUMA_SUPPORT libperl: [ on ] # HAVE_LIBPERL_SUPPORT libpython: [ on ] # HAVE_LIBPYTHON_SUPPORT libslang: [ on ] # HAVE_SLANG_SUPPORT libcrypto: [ on ] # HAVE_LIBCRYPTO_SUPPORT libunwind: [ on ] # HAVE_LIBUNWIND_SUPPORT libdw-dwarf-unwind: [ on ] # HAVE_DWARF_SUPPORT zlib: [ on ] # HAVE_ZLIB_SUPPORT lzma: [ on ] # HAVE_LZMA_SUPPORT get_cpuid: [ on ] # HAVE_AUXTRACE_SUPPORT bpf: [ on ] # HAVE_LIBBPF_SUPPORT v4: 1. Also print the macro name. That would make it easier to grep around in the source looking for where code related a particular features is located. 2. Update since HAVE_DWARF_GETLOCATIONS is renamed to HAVE_DWARF_GETLOCATIONS_SUPPORT v3: Remove following unnecessary help message. 1. [ on ]: library is compiled-in [ OFF ]: library is disabled in make configuration OR library is not installed in build environment 2. Create '--build-options' option. 3. Use standard option parsing API 'parse_options'. v2: 1. Use IS_BUILTIN macro to replace #ifdef/#endif block. 2. Print color for on/OFF. Signed-off-by:Ingo Molnar <mingo@kernel.org> Suggested-by:
-
Jin Yao authored
In Makefile.config, to make all libraries flags have _SUPPORT suffix, rename HAVE_DWARF_GETLOCATIONS to HAVE_DWARF_GETLOCATIONS_SUPPORT Signed-off-by:
-
Jin Yao authored
For most of libraries, in perf.config, they are recorded with -DHAVE_XXX in CFLAGS according to if the libraries are compiled-in. Then C code then will know if the library is compiled-in or not. While for glibc, no -DHAVE_GLIBC_SUPPORT exists. For python and perl libraries, only -DNO_PYTHON and -DNO_LIBPERL exist. To make the code more consistent, the patch creates -DHAVE_LIBPYTHON_SUPPORT and -DHAVE_LIBPERL_SUPPORT if the python and perl libraries are compiled-in. Since the existing flags -DNO_PYTHON and -DNO_LIBPERL are being used in many places in C code, this patch doesn't remove them. In a follow-up patch, we will recontruct the C code and then use HAVE_XXX instead. v3: Move 'CFLAGS += -DHAVE_LIBPYTHON_SUPPORT' and 'CFLAGS += -DHAVE_LIBPERL_SUPPORT' to other places to avoid duplicated feature checking. v2: Create -DHAVE_GLIBC_SUPPORT, -DHAVE_LIBPYTHON_SUPPORT and -DHAVE_LIBPERL_SUPPORT. Signed-off-by:
-
Jiri Olsa authored
Adding IS_BUILTIN macro and its dependencies into tools world. It's taken from kernel's include/linux/kconfig.h, which can't be taken completely due to its kconfig dependencies. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
For instance: # perf probe "vfs_getname=getname_flags:72 pathname=result->name:string" Added new event: probe:vfs_getname (on getname_flags:72 with pathname=result->name:string) You can now use it in all perf tools, such as: perf record -e probe:vfs_getname -aR sleep 1 # perf trace --failure sleep 1 0.043 ( 0.010 ms): sleep/10978 access(filename: /etc/ld.so.preload, mode: R) = -1 ENOENT No such file or directory For reference, here are all the syscalls in this case: # perf trace sleep 1 ? ( ): sleep/10976 ... [continued]: execve()) = 0 0.027 ( 0.001 ms): sleep/10976 brk() = 0x55bdc2d04000 0.044 ( 0.010 ms): sleep/10976 access(filename: /etc/ld.so.preload, mode: R) = -1 ENOENT No such file or directory 0.057 ( 0.006 ms): sleep/10976 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC) = 3 0.064 ( 0.002 ms): sleep/10976 fstat(fd: 3, statbuf: 0x7fffac22b370) = 0 0.067 ( 0.003 ms): sleep/10976 mmap(len: 111457, prot: READ, flags: PRIVATE, fd: 3) = 0x7feec8615000 0.071 ( 0.001 ms): sleep/10976 close(fd: 3) = 0 0.080 ( 0.007 ms): sleep/10976 openat(dfd: CWD, filename: /lib64/libc.so.6, flags: CLOEXEC) = 3 0.088 ( 0.002 ms): sleep/10976 read(fd: 3, buf: 0x7fffac22b538, count: 832) = 832 0.092 ( 0.001 ms): sleep/10976 fstat(fd: 3, statbuf: 0x7fffac22b3d0) = 0 0.094 ( 0.002 ms): sleep/10976 mmap(len: 8192, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS) = 0x7feec8613000 0.099 ( 0.004 ms): sleep/10976 mmap(len: 3889792, prot: EXEC|READ, flags: PRIVATE|DENYWRITE, fd: 3) = 0x7feec8057000 0.104 ( 0.007 ms): sleep/10976 mprotect(start: 0x7feec8203000, len: 2097152) = 0 0.112 ( 0.005 ms): sleep/10976 mmap(addr: 0x7feec8403000, len: 24576, prot: READ|WRITE, flags: PRIVATE|DENYWRITE|FIXED, fd: 3, off: 1753088) = 0x7feec8403000 0.120 ( 0.003 ms): sleep/10976 mmap(addr: 0x7feec8409000, len: 14976, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS|FIXED) = 0x7feec8409000 0.128 ( 0.001 ms): sleep/10976 close(fd: 3) = 0 0.139 ( 0.001 ms): sleep/10976 arch_prctl(option: 4098, arg2: 140663540761856) = 0 0.186 ( 0.004 ms): sleep/10976 mprotect(start: 0x7feec8403000, len: 16384, prot: READ) = 0 0.204 ( 0.003 ms): sleep/10976 mprotect(start: 0x55bdc0ec3000, len: 4096, prot: READ) = 0 0.209 ( 0.004 ms): sleep/10976 mprotect(start: 0x7feec8631000, len: 4096, prot: READ) = 0 0.214 ( 0.010 ms): sleep/10976 munmap(addr: 0x7feec8615000, len: 111457) = 0 0.269 ( 0.001 ms): sleep/10976 brk() = 0x55bdc2d04000 0.271 ( 0.002 ms): sleep/10976 brk(brk: 0x55bdc2d25000) = 0x55bdc2d25000 0.274 ( 0.001 ms): sleep/10976 brk() = 0x55bdc2d25000 0.278 ( 0.007 ms): sleep/10976 open(filename: /usr/lib/locale/locale-archive, flags: CLOEXEC) = 3 0.288 ( 0.001 ms): sleep/10976 fstat(fd: 3</usr/lib/locale/locale-archive>, statbuf: 0x7feec8408aa0) = 0 0.290 ( 0.003 ms): sleep/10976 mmap(len: 113045344, prot: READ, flags: PRIVATE, fd: 3) = 0x7feec1488000 0.297 ( 0.001 ms): sleep/10976 close(fd: 3</usr/lib/locale/locale-archive>) = 0 0.325 (1000.193 ms): sleep/10976 nanosleep(rqtp: 0x7fffac22c0b0) = 0 1000.560 ( 0.006 ms): sleep/10976 close(fd: 1) = 0 1000.573 ( 0.005 ms): sleep/10976 close(fd: 2) = 0 1000.596 ( ): sleep/10976 exit_group() # And can be done systemwide, etc, with backtraces: # perf trace --max-stack=16 --failure sleep 1 0.048 ( 0.015 ms): sleep/11092 access(filename: /etc/ld.so.preload, mode: R) = -1 ENOENT No such file or directory __access (inlined) dl_main (/usr/lib64/ld-2.26.so) # Or for some specific syscalls: # perf trace --max-stack=16 -e openat --failure cat /tmp/rien cat: /tmp/rien: No such file or directory 0.251 ( 0.012 ms): cat/11106 openat(dfd: CWD, filename: /tmp/rien) = -1 ENOENT No such file or directory __libc_open64 (inlined) main (/usr/bin/cat) __libc_start_main (/usr/lib64/libc-2.26.so) _start (/usr/bin/cat) # Look for inotify* syscalls that fail, system wide, for 2 seconds, with backtraces: # perf trace -a --max-stack=16 --failure -e inotify* sleep 2 819.165 ( 0.058 ms): gmain/1724 inotify_add_watch(fd: 8<anon_inode:inotify>, pathname: /home/acme/~, mask: 16789454) = -1 ENOENT No such file or directory __GI_inotify_add_watch (inlined) _ik_watch (/usr/lib64/libgio-2.0.so.0.5400.3) _ip_start_watching (/usr/lib64/libgio-2.0.so.0.5400.3) im_scan_missing (/usr/lib64/libgio-2.0.so.0.5400.3) g_timeout_dispatch (/usr/lib64/libglib-2.0.so.0.5400.3) g_main_context_dispatch (/usr/lib64/libglib-2.0.so.0.5400.3) g_main_context_iterate.isra.23 (/usr/lib64/libglib-2.0.so.0.5400.3) g_main_context_iteration (/usr/lib64/libglib-2.0.so.0.5400.3) glib_worker_main (/usr/lib64/libglib-2.0.so.0.5400.3) g_thread_proxy (/usr/lib64/libglib-2.0.so.0.5400.3) start_thread (/usr/lib64/libpthread-2.26.so) __GI___clone (inlined) # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-8f7d3mngaxvi7tlzloz3n7cs@git.kernel.orgSigned-off-by: -
Arnaldo Carvalho de Melo authored
Due to these commits: 1da961d7 ("x86/cpufeatures: Add Intel Total Memory Encryption cpufeature") 7958b224 ("x86/cpufeatures: Add Intel PCONFIG cpufeature") To silence this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' Nothing in those csets requires changes in tools/perf/, so just sync it to silence the build. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-m2yl8wj0uxs8pncq2ncfcx46@git.kernel.orgSigned-off-by:
-
Kim Phillips authored
Add DSO size to perf report/top sort output list. This includes adding a map__size fn to map.h, which is approximately equal to the DSO data file_size: DSO file size map (end-start) file / (end-start) libwebkit2gtk-4.0.so.37.24.9 43260072 41295872 95% libglib-2.0.so.0.5400.1 1125680 1118208 99% libc-2.26.so 1960656 1925120 101% libdbus-1.so.3.14.13 309456 303104 102% Sample output: $ ./perf report -s dso_size,dso Samples: 2K of event 'cycles:uppp', Event count (approx.): 128373340 Overhead DSO size Shared Object 90.62% unknown [unknown] 2.87% 1118208 libglib-2.0.so.0.5400.1 1.92% 303104 libdbus-1.so.3.14.13 1.42% 1925120 libc-2.26.so 0.77% 41295872 libwebkit2gtk-4.0.so.37.24.9 0.61% 335872 libgobject-2.0.so.0.5400.1 0.41% 1052672 libgdk-3.so.0.2200.25 0.36% 106496 libpthread-2.26.so 0.29% 221184 dbus-daemon 0.17% 159744 ld-2.26.so 0.13% 49152 libwayland-client.so.0.3.0 0.12% 1642496 libgio-2.0.so.0.5400.1 0.09% 73277443 libgtk-3.so.0.2200.25 0.09% 12324864 libmozjs-52.so.0.0.0 0.05% 4796416 perf 0.04% 843776 libgjs.so.0.0.0 0.03% 1409024 libmutter-clutter-1.so Committer testing: To sort by DSO size, use: # perf report -F dso_size,dso,overhead -s dso_size <SNIP> 3465216 libdns-export.so.174.0.1 0.00% 3522560 libgc.so.1.0.3 0.00% 3538944 libbfd-2.29-13.fc27.so 0.59% 3670016 libunistring.so.2.1.0 0.00% 3723264 libguile-2.0.so.22.8.1 0.00% 3776512 libgio-2.0.so.0.5400.3 0.00% 3891200 libc-2.26.so 0.96% 3944448 libmozjs-17.0.so 0.00% 4218880 libperl.so.5.26.1 0.18% 4452352 libpython2.7.so.1.0 0.02% 4472832 perf 0.02% 4603904 git 0.01% 4751360 libcrypto.so.1.1.0g 0.00% 5005312 libslang.so.2.3.1 0.00% 7315456 libgtk-3.so.0.2200.26 0.09% 8818688 i965_dri.so 2.46% 8818688 i965_dri.so (deleted) 1.26% 12414976 libmozjs-52.so.0.0.0 0.03% 23642112 cc1 2.02% 27889664 [kernel.kallsyms] 25.41% 80834560 libxul.so (deleted) 15.68% 98078720 chrome 32.03% 1056964608 [kernel.kallsyms] 1.59% # Signed-off-by:Kim Phillips <kim.phillips@arm.com> Tested-by:
-
- 31 Mar, 2018 2 commits
-
-
Harry Pan authored
Cannon Lake supports C1/C3/C6/C7, PC2/PC3/PC6/PC7/PC8/PC9/PC10 state residency counters, this patch enables those counters. ( The MSR information is based on Intel Software Developers' Manual, Vol. 4, Order No. 335592. ) Tested-by:
Puthikorn Voravootivat <puthik@chromium.org> Signed-off-by:
Harry Pan <harry.pan@intel.com> Reviewed-by:
Benson Leung <bleung@chromium.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan.liang@intel.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: gs0622@gmail.com Link: http://lkml.kernel.org/r/20180309121549.630-3-harry.pan@intel.comSigned-off-by:
-
Harry Pan authored
This patch enables RAPL counters (energy consumption counters) support for Cannon Lake processors. ( ESU and power domains refer to Intel Software Developers' Manual, Vol. 4, Order No. 335592. ) Usage example: $ perf list $ perf stat -a -e power/energy-cores/,power/energy-pkg/ sleep 10 Tested-by:
-
- 29 Mar, 2018 3 commits
-
-
Alexander Shishkin authored
This is a cosmetic patch that deals with the address filter structure's ambiguous fields 'filter' and 'range'. The former stands to mean that the filter's *action* should be to filter the traces to its address range if it's set or stop tracing if it's unset. This is confusing and hard on the eyes, so this patch replaces it with 'action' enum. The 'range' field is completely redundant (meaning that the filter is an address range as opposed to a single address trigger), as we can use zero size to mean the same thing. Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/20180329120648.11902-1-alexander.shishkin@linux.intel.comSigned-off-by:
-
Ingo Molnar authored
Conflicts: kernel/events/hw_breakpoint.c Signed-off-by: -
Ingo Molnar authored
Merge tag 'perf-core-for-mingo-4.17-20180328' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: - Be consistent when checking if a perf_mmap instance had its ring buffer unmmaped, fixing segfaults noticed in 'perf trace' (Kan Liang, Arnaldo Carvalho de Melo) - Avoid adding the same option multiple times to the 'diff' command in check-headers.sh (Jiri Olsa) - Add vendor event files (JSON format) to various IBM s390 models (z10EC, z10BC, z196, zEC12, zBC12, z13 and z14) (Thomas Richter) Signed-off-by:
-
- 28 Mar, 2018 1 commit
-
-
Linus Torvalds authored
Annoyingly, modify_user_hw_breakpoint() unnecessarily complicates the modification of a breakpoint - simplify it and remove the pointless local variables. Also update the stale Docbook while at it. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Acked-by:
Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by:
-
- 27 Mar, 2018 10 commits
-
-
Thomas Richter authored
Add CPU measurement counter facility event description files (json files) for IBM z14. Signed-off-by:
Thomas Richter <tmricht@linux.vnet.ibm.com> Reviewed-by:
Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180326082538.2258-5-tmricht@linux.vnet.ibm.comSigned-off-by:
-
Thomas Richter authored
Add CPU measurement counter facility event description files (json files) for IBM z13. Signed-off-by:
-
Thomas Richter authored
Add CPU measurement counter facility event description files (json files) for IBM zEC12 and zBC12. Signed-off-by:
-
Thomas Richter authored
Add CPU measurement counter facility event description files (json files) for IBM z196. Signed-off-by:
-
Thomas Richter authored
Add CPU measurement counter facility event description files (JSON files) for IBM z10EC and z10BC. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
The previous patch is insufficient to cure the reported 'perf trace' segfault, as it only cures the perf_mmap__read_done() case, moving the segfault to perf_mmap__read_init() functio, fix it by doing the same refcount check. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Fixes: 8872481b ("perf mmap: Introduce perf_mmap__read_init()") Link: https://lkml.kernel.org/r/20180326144127.GF18897@kernel.orgSigned-off-by:
-
Kan Liang authored
There is a segmentation fault when running 'perf trace'. For example: [root@jouet e]# perf trace -e *chdir -o /tmp/bla perf report --ignore-vmlinux -i ../perf.data The perf_mmap__consume() could unmap the mmap. It needs to check the refcnt in perf_mmap__read_done(). Reported-by:
Kan Liang <kan.liang@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Fixes: ee023de0 ("perf mmap: Introduce perf_mmap__read_done()") Link: http://lkml.kernel.org/r/1522071729-16776-1-git-send-email-kan.liang@linux.intel.comSigned-off-by:
-
Jiri Olsa authored
Currently the "opts" variable is not zero-ed and we keep on adding to it, ending up with: $ check-headers.sh 2>&1 + opts=' "-B"' + opts=' "-B" "-B"' + opts=' "-B" "-B" "-B"' + opts=' "-B" "-B" "-B" "-B"' + opts=' "-B" "-B" "-B" "-B" "-B"' + opts=' "-B" "-B" "-B" "-B" "-B" "-B"' Fix this by initializing it in the check() function, right before starting the loop. Signed-off-by:
-
Stephane Eranian authored
this patch fix a bug in how the pebs->real_ip is handled in the PEBS handler. real_ip only exists in Haswell and later processor. It is actually the eventing IP, i.e., where the event occurred. As opposed to the pebs->ip which is the PEBS interrupt IP which is always off by one. The problem is that the real_ip just like the IP needs to be fixed up because PEBS does not record all the machine state registers, and in particular the code segement (cs). This is why we have the set_linear_ip() function. The problem was that set_linear_ip() was only used on the pebs->ip and not the pebs->real_ip. We have profiles which ran into invalid callstacks because of this. Here is an example: ..... 0: ffffffffffffff80 recent entry, marker kernel v ..... 1: 000000000040044d <= user address in kernel space! ..... 2: fffffffffffffe00 marker enter user v ..... 3: 000000000040044d ..... 4: 00000000004004b6 oldest entry Debugging output in get_perf_callchain(): [ 857.769909] CALLCHAIN: CPU8 ip=40044d regs->cs=10 user_mode(regs)=0 The problem is that the kernel entry in 1: points to a user level address. How can that be? The reason is that with PEBS sampling the instruction that caused the event to occur and the instruction where the CPU was when the interrupt was posted may be far apart. And sometime during that time window, the privilege level may change. This happens, for instance, when the PEBS sample is taken close to a kernel entry point. Here PEBS, eventing IP (real_ip) captured a user level instruction. But by the time the PMU interrupt fired, the processor had already entered kernel space. This is why the debug output shows a user address with user_mode() false. The problem comes from PEBS not recording the code segment (cs) register. The register is used in x86_64 to determine if executing in kernel vs user space. This is okay because the kernel has a software workaround called set_linear_ip(). But the issue in setup_pebs_sample_data() is that set_linear_ip() is never called on the real_ip value when it is available (Haswell and later) and precise_ip > 1. This patch fixes this problem and eliminates the callchain discrepancy. The patch restructures the code around set_linear_ip() to minimize the number of times the IP has to be set. Signed-off-by:
Stephane Eranian <eranian@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: kan.liang@intel.com Link: http://lkml.kernel.org/r/1521788507-10231-1-git-send-email-eranian@google.comSigned-off-by:
-
Davidlohr Bueso authored
No changes in refcount semantics -- use DEFINE_STATIC_KEY_FALSE() for initialization and replace: static_key_slow_inc|dec() => static_branch_inc|dec() static_key_false() => static_branch_unlikely() Added a '_key' suffix to rdpmc_always_available, for better self-documentation. Signed-off-by:
Davidlohr Bueso <dbueso@suse.de> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akpm@linux-foundation.org Link: http://lkml.kernel.org/r/20180326210929.5244-5-dave@stgolabs.netSigned-off-by:
-
- 25 Mar, 2018 7 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/slave-dmaLinus Torvalds authored
Pull dmaengine fix from Vinod Koul: "One small fix for stm32-dmamux fixing buffer overflow" * tag 'dmaengine-fix-4.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/slave-dma: dmaengine: stm32-dmamux: fix a potential buffer overflow
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 and PTI fixes from Ingo Molnar: "Misc fixes: - fix EFI pagetables freeing - fix vsyscall pagetable setting on Xen PV guests - remove ancient CONFIG_X86_PPRO_FENCE=y - x86 is TSO again - fix two binutils (ld) development version related incompatibilities - clean up breakpoint handling - fix an x86 self-test" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry/64: Don't use IST entry for #BP stack x86/efi: Free efi_pgd with free_pages() x86/vsyscall/64: Use proper accessor to update P4D entry x86/cpu: Remove the CONFIG_X86_PPRO_FENCE=y quirk x86/boot/64: Verify alignment of the LOAD segment x86/build/64: Force the linker to use 2MB page size selftests/x86/ptrace_syscall: Fix for yet more glibc interference
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Ingo Molnar: "Make posix clock ID usage Spectre-safe" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: posix-timers: Protect posix clock array access against speculation
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Two sched debug output related fixes: a console output fix and formatting fixes" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/debug: Adjust newlines for better alignment sched/debug: Fix per-task line continuation for console output
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Misc kernel side fixes. Generic: - cgroup events counting fix x86: - Intel PMU truncated-parameter fix - RDPMC fix - API naming fix/rename - uncore driver big-hardware PCI enumeration fix - uncore driver filter constraint fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/cgroup: Fix child event counting bug perf/x86/intel/uncore: Fix multi-domain PCI CHA enumeration bug on Skylake servers perf/x86/intel: Rename confusing 'freerunning PEBS' API and implementation to 'large PEBS' perf/x86/intel/uncore: Add missing filter constraint for SKX CHA event perf/x86/intel: Don't accidentally clear high bits in bdw_limit_period() perf/x86/intel: Disable userspace RDPMC usage for large PEBS
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixes from Ingo Molnar: "Two fixes: tighten up a jump-labels warning to not trigger on certain modules and fix confusing (and non-existent) mutex API documentation" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: jump_label: Disable jump labels in __exit code locking/mutex: Improve documentation
-
