- 18 Nov, 2016 17 commits
-
-
David S. Miller authored
Saeed Mahameed says: ==================== Mellanox 100G mlx5 update 2016-11-15 This series contains four humble mlx5 features. From Gal, - Add the support for PCIe statistics and expose them in ethtool From Huy, - Add the support for port module events reporting and statistics - Add the support for driver version setting into FW (for display purposes only) From Mohamad, - Extended the command interface cache flexibility This series was generated against commit 6a02f5eb ("Merge branch 'mlxsw-i2c") V2: - Changed plain "unsigned" to "unsigned int" ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Gal Pressman authored
This patch exposes two groups of PCIe counters: - Performance counters. - Timers and states counters. Queried with ethtool -S <devname>. Signed-off-by:
Gal Pressman <galp@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Gal Pressman authored
Add the needed infrastructure for future use of MPCNT register. Signed-off-by:
-
Huy Nguyen authored
If driver_version capability bit is enabled, set driver version to firmware after the init HCA command, for display purposes. Example of driver version: "Linux,mlx5_core,3.0-1" Signed-off-by:
Huy Nguyen <huyn@mellanox.com> Signed-off-by:
-
Saeed Mahameed authored
Add driver_version capability bit is enabled, and set driver version command in mlx5_ifc firmware header. The only purpose of this command is to store a driver version/OS string in FW to be reported and displayed in various management systems, such as IPMI/BMC. Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Huy Nguyen authored
Add port module event counters to ethtool -S command Signed-off-by:
-
Huy Nguyen authored
For each asynchronous port module event: 1. print with ratelimit to the dmesg log 2. increment the corresponding event counter Signed-off-by:
-
Huy Nguyen authored
Add hardware structures and constants definitions needed for module events support. Signed-off-by:
-
Mohamad Haj Yahia authored
Add more cache command size sets and more entries for each set based on the current commands set different sizes and commands frequency. Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by:
Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by:
-
David S. Miller authored
Edward Cree says: ==================== sfc: Firmware-Assisted TSO version 2 The firmware on 8000 series SFC NICs supports a new TSO API ("FATSOv2"), and 7000 series NICs will also support this in an imminent release. This series adds driver support for this TSO implementation. The series also removes SWTSO, as it's now equivalent to GSO. This does not actually remove very much code, because SWTSO was grotesquely intertwingled with FATSOv1, which will also be removed once 7000 series supports FATSOv2. ==================== Signed-off-by: -
Edward Cree authored
It gives no advantage over GSO now that xmit_more exists. If we find ourselves unable to handle a TSO skb (because our TXQ doesn't have a TSOv2 context and the NIC doesn't support TSOv1), hand it back to GSO. Also do that if the TSO handler fails with EINVAL for any other reason. As Falcon-architecture NICs don't support any firmware-assisted TSO, they no longer advertise TSO feature flags at all. Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
Edward Cree authored
If we fail to init the TXQ because of insufficient TSOv2 contexts, try again with TSOv2 disabled. Signed-off-by:
-
Bert Kenward authored
Add support for FATSOv2 to the driver. FATSOv2 offloads far more of the task of TCP segmentation to the firmware, such that we now just pass a single super-packet to the NIC. This means TSO has a great deal in common with a normal DMA transmit, apart from adding a couple of option descriptors. NIC-specific checks have been moved off the fast path and in to initialisation where possible. This also moves FATSOv1/SWTSO to a new file (tx_tso.c). The end of transmit and some error handling is now outside TSO, since it is common with other code. Signed-off-by:
-
Edward Cree authored
Signed-off-by:
-
Edward Cree authored
Signed-off-by:
-
Alexey Dobriyan authored
Make struct pernet_operations::id unsigned. There are 2 reasons to do so: 1) This field is really an index into an zero based array and thus is unsigned entity. Using negative value is out-of-bound access by definition. 2) On x86_64 unsigned 32-bit data which are mixed with pointers via array indexing or offsets added or subtracted to pointers are preffered to signed 32-bit data. "int" being used as an array index needs to be sign-extended to 64-bit before being used. void f(long *p, int i) { g(p[i]); } roughly translates to movsx rsi, esi mov rdi, [rsi+...] call g MOVSX is 3 byte instruction which isn't necessary if the variable is unsigned because x86_64 is zero extending by default. Now, there is net_generic() function which, you guessed it right, uses "int" as an array index: static inline void *net_generic(const struct net *net, int id) { ... ptr = ng->ptr[id - 1]; ... } And this function is used a lot, so those sign extensions add up. Patch snipes ~1730 bytes on allyesconfig kernel (without all junk messing with code generation): add/remove: 0/0 grow/shrink: 70/598 up/down: 396/-2126 (-1730) Unfortunately some functions actually grow bigger. This is a semmingly random artefact of code generation with register allocator being used differently. gcc decides that some variable needs to live in new r8+ registers and every access now requires REX prefix. Or it is shifted into r12, so [r12+0] addressing mode has to be used which is longer than [r8] However, overall balance is in negative direction: add/remove: 0/0 grow/shrink: 70/598 up/down: 396/-2126 (-1730) function old new delta nfsd4_lock 3886 3959 +73 tipc_link_build_proto_msg 1096 1140 +44 mac80211_hwsim_new_radio 2776 2808 +32 tipc_mon_rcv 1032 1058 +26 svcauth_gss_legacy_init 1413 1429 +16 tipc_bcbase_select_primary 379 392 +13 nfsd4_exchange_id 1247 1260 +13 nfsd4_setclientid_confirm 782 793 +11 ... put_client_renew_locked 494 480 -14 ip_set_sockfn_get 730 716 -14 geneve_sock_add 829 813 -16 nfsd4_sequence_done 721 703 -18 nlmclnt_lookup_host 708 686 -22 nfsd4_lockt 1085 1063 -22 nfs_get_client 1077 1050 -27 tcf_bpf_init 1106 1076 -30 nfsd4_encode_fattr 5997 5930 -67 Total: Before=154856051, After=154854321, chg -0.00% Signed-off-by:Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Eric Dumazet authored
UDP busy polling is restricted to connected UDP sockets. This is because sk_busy_loop() only takes care of one NAPI context. There are cases where it could be extended. 1) Some hosts receive traffic on a single NIC, with one RX queue. 2) Some applications use SO_REUSEPORT and associated BPF filter to split the incoming traffic on one UDP socket per RX queue/thread/cpu 3) Some UDP sockets are used to send/receive traffic for one flow, but they do not bother with connect() This patch records the napi_id of first received skb, giving more reach to busy polling. Tested: lpaa23:~# echo 70 >/proc/sys/net/core/busy_read lpaa24:~# echo 70 >/proc/sys/net/core/busy_read lpaa23:~# for f in `seq 1 10`; do ./super_netperf 1 -H lpaa24 -t UDP_RR -l 5; done Before patch : 27867 28870 37324 41060 41215 36764 36838 44455 41282 43843 After patch : 73920 73213 70147 74845 71697 68315 68028 75219 70082 73707 Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by:
-
- 17 Nov, 2016 22 commits
-
-
David S. Miller authored
Sowmini Varadhan says: ==================== RDS: TCP: HA/Failover fixes This series contains a set of fixes for bugs exposed when we ran the following in a loop between a test machine pair: while (1); do # modprobe rds-tcp on test nodes # run rds-stress in bi-dir mode between test machine pair # modprobe -r rds-tcp on test nodes done rds-stress in bi-dir mode will cause both nodes to initiate RDS-TCP connections at almost the same instant, exposing the bugs fixed in this series. Without the fixes, rds-stress reports sporadic packet drops, and packets arriving out of sequence. After the fixes,we have been able to run the test overnight, without any issues. Each patch has a detailed description of the root-cause fixed by the patch. ==================== Signed-off-by: -
Sowmini Varadhan authored
When 2 RDS peers initiate an RDS-TCP connection simultaneously, there is a potential for "duelling syns" on either/both sides. See commit 241b2719 ("RDS-TCP: Reset tcp callbacks if re-using an outgoing socket in rds_tcp_accept_one()") for a description of this condition, and the arbitration logic which ensures that the numerically large IP address in the TCP connection is bound to the RDS_TCP_PORT ("canonical ordering"). The rds_connection should not be marked as RDS_CONN_UP until the arbitration logic has converged for the following reason. The sender may start transmitting RDS datagrams as soon as RDS_CONN_UP is set, and since the sender removes all datagrams from the rds_connection's cp_retrans queue based on TCP acks. If the TCP ack was sent from a tcp socket that got reset as part of duel aribitration (but before data was delivered to the receivers RDS socket layer), the sender may end up prematurely freeing the datagram, and the datagram is no longer reliably deliverable. This patch remedies that condition by making sure that, upon receipt of 3WH completion state change notification of TCP_ESTABLISHED in rds_tcp_state_change, we mark the rds_connection as RDS_CONN_UP if, and only if, the IP addresses and ports for the connection are canonically ordered. In all other cases, rds_tcp_state_change will force an rds_conn_path_drop(), and rds_queue_reconnect() on both peers will restart the connection to ensure canonical ordering. A side-effect of enforcing this condition in rds_tcp_state_change() is that rds_tcp_accept_one_path() can now be refactored for simplicity. It is also no longer possible to encounter an RDS_CONN_UP connection in the arbitration logic in rds_tcp_accept_one(). Signed-off-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Sowmini Varadhan authored
The RDS transport has to be able to distinguish between two types of failure events: (a) when the transport fails (e.g., TCP connection reset) but the RDS socket/connection layer on both sides stays the same (b) when the peer's RDS layer itself resets (e.g., due to module reload or machine reboot at the peer) In case (a) both sides must reconnect and continue the RDS messaging without any message loss or disruption to the message sequence numbers, and this is achieved by rds_send_path_reset(). In case (b) we should reset all rds_connection state to the new incarnation of the peer. Examples of state that needs to be reset are next expected rx sequence number from, or messages to be retransmitted to, the new incarnation of the peer. To achieve this, the RDS handshake probe added as part of commit 5916e2c1 ("RDS: TCP: Enable multipath RDS for TCP") is enhanced so that sender and receiver of the RDS ping-probe will add a generation number as part of the RDS_EXTHDR_GEN_NUM extension header. Each peer stores local and remote generation numbers as part of each rds_connection. Changes in generation number will be detected via incoming handshake probe ping request or response and will allow the receiver to reset rds_connection state. Signed-off-by: -
Sowmini Varadhan authored
As noted in rds_recv_incoming() sequence numbers on data packets can decreas for the failover case, and the Rx path is equipped to recover from this, if the RDS_FLAG_RETRANSMITTED is set on the rds header of an incoming message with a suspect sequence number. The RDS_FLAG_RETRANSMITTED is predicated on the RDS_FLAG_RETRANSMITTED flag in the rds_message, so make sure the flag is set on messages queued for retransmission. Signed-off-by:
-
LABBE Corentin authored
As sugested by Joe Perches, we could replace all if (netif_msg_type(priv)) dev_xxx(priv->devices, ...) by the simpler macro netif_xxx(priv, hw, priv->dev, ...) Signed-off-by:
Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by:
-
LABBE Corentin authored
Some printing have the function name hardcoded. It is better to use __func__ instead. Signed-off-by:
-
LABBE Corentin authored
The stmmac driver use lots of pr_xxx functions to print information. This is bad since we cannot know which device logs the information. (moreover if two stmmac device are present) Furthermore, it seems that it assumes wrongly that all logs will always be subsequent by using a dev_xxx then some indented pr_xxx like this: kernel: sun7i-dwmac 1c50000.ethernet: no reset control found kernel: Ring mode enabled kernel: No HW DMA feature register supported kernel: Normal descriptors kernel: TX Checksum insertion supported So this patch replace all pr_xxx by their netdev_xxx counterpart. Excepts for some printing where netdev "cause" unpretty output like: sun7i-dwmac 1c50000.ethernet (unnamed net_device) (uninitialized): no reset control found In those case, I keep dev_xxx. In the same time I remove some "stmmac:" print since this will be a duplicate with that dev_xxx displays. Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
-
Eric Dumazet authored
When I wrote sch_fq.c, hash_ptr() on 64bit arches was awful, and I chose hash_32(). Linus Torvalds and George Spelvin fixed this issue, so we can use hash_ptr() to get more entropy on 64bit arches with Terabytes of memory, and avoid the cast games. Signed-off-by:
-
Eric Dumazet authored
Calling napi_hash_del() after netif_napi_del() is pointless. Signed-off-by:
-
Eric Dumazet authored
There is no need calling napi_hash_del()+synchronize_rcu() before calling netif_napi_del() netif_napi_del() does this already. Using napi_hash_del() in a driver is useful only when dealing with a batch of NAPI structures, so that a single synchronize_rcu() can be used. mlx4_en_deactivate_cq() is deactivating a single NAPI. Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: Introduce support for I2C bus Vadim says: This patchset adds I2C access support for SwitchX, SwitchX2, SwitchIB, SwitchIB2 and Spectrum silicones. It contains: - Small changes in mlxsw core code, needed for I2C bus support; - I2C driver, which obtains I2C input/output mailboxes setting and provides command interface implementation. - Minimal driver, which works on top of I2C driver and allows running of mlxsw command interface over I2C bus; Use case: On system, which does not have PCI to ASIC (BMC), hwmon functionality (sensors, pwm, tacho) will be available through I2C. Usage (manual probing): echo mlxsw_minimal 0x48 > /sys/bus/i2c/devices/i2c-2/new_device Sysfs interface: /sys/bus/i2c/devices/2-0048/hwmon/hwmon5/pwm1 /sys/bus/i2c/devices/2-0048/hwmon/hwmon5/temp1_input ==================== Signed-off-by: -
Vadim Pasternak authored
Add I2C access support for Mellanox ASICs: - Virtual Protocol Interconnect switches SwitchX, SwitchX2, providing InfiniBand, Ethernet and Fibre Channel connectivity; - Infiniband switches SwitchIB, SwitchIB2: - Ethernet switch Spectrum. Example of probing activation: echo mlxsw_minimal 0x48 > /sys/bus/i2c/devices/i2c-2/new_device Signed-off-by:
Vadim Pasternak <vadimp@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Vadim Pasternak authored
We are going to add a minimal driver on top of the mlxsw core infrastructure, which will be mainly used for hardware monitoring in Baseboard management controller (BMC) installations. Unlike the switch drivers (e.g., spectrum, switchx2), this driver does not initialize the ASIC and therefore doesn't need to implement the init() and fini() methods in its 'mlxsw_driver' struct. Signed-off-by:
-
Vadim Pasternak authored
Add I2C bus implementation for Mellanox Technologies Switch ASICs. This includes command interface implementation using input / out mailboxes, whose location is retrieved from the firmware during probe time. Signed-off-by:
-
Vadim Pasternak authored
The mlxsw core infrastructure currently assumes that communication with the ASIC is always possible using Ethernet management datagrams (EMADs), but this is only possible when the PCI bus is used. The bus capability flag is added to indicate EMAD support and make core initialize EMAD communication only when it's set. Otherwise, register access is done using command interface. Signed-off-by:
-
Julia Lawall authored
knav_queue_open always returns an ERR_PTR value, never NULL. This can be confirmed by unfolding the function calls and conforms to the function's documentation. Thus, replace IS_ERR_OR_NULL by IS_ERR in error checks. The change is made using the following semantic patch: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x; statement S; @@ x = knav_queue_open(...); if ( - IS_ERR_OR_NULL + IS_ERR (x)) S // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Xin Long authored
Now sctp transport rhashtable uses hash(lport, dport, daddr) as the key to hash a node to one chain. If in one host thousands of assocs connect to one server with the same lport and different laddrs (although it's not a normal case), all the transports would be hashed into the same chain. It may cause to keep returning -EBUSY when inserting a new node, as the chain is too long and sctp inserts a transport node in a loop, which could even lead to system hangs there. The new rhlist interface works for this case that there are many nodes with the same key in one chain. It puts them into a list then makes this list be as a node of the chain. This patch is to replace rhashtable_ interface with rhltable_ interface. Since a chain would not be too long and it would not return -EBUSY with this fix when inserting a node, the reinsert loop is also removed here. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Updates. New firmware spec. update, autoneg update, and UDP RSS support. ==================== Signed-off-by: -
Michael Chan authored
To display and modify the RSS hash. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Michael Chan authored
The newer chips have proper support for 4-tuple UDP RSS. Signed-off-by:
-
Michael Chan authored
On some dual port NICs, the speed setting on one port can affect the available speed on the other port. Add logic to detect these changes and adjust the advertised speed settings when necessary. Signed-off-by:
-
Michael Chan authored
Use the new FORCE_LINK_DWN bit to shutdown link during close. Signed-off-by:
-
- 16 Nov, 2016 1 commit
-
-
Eric Dumazet authored
Callers of netpoll_poll_lock() own NAPI_STATE_SCHED Callers of netpoll_poll_unlock() have BH blocked between the NAPI_STATE_SCHED being cleared and poll_lock is released. We can avoid the spinlock which has no contention, and use cmpxchg() on poll_owner which we need to set anyway. This removes a possible lockdep violation after the cited commit, since sk_busy_loop() re-enables BH before calling busy_poll_stop() Fixes: 217f6974 ("net: busy-poll: allow preemption in sk_busy_loop()") Signed-off-by:
-
