- 13 Mar, 2018 29 commits
-
-
Jerome Brunet authored
mpll clocks parent can actually be divided by 1 or 2. So far, this divider has always been set to 1, so the calculation was correct. Now that we know it exists, model the tree correctly. If we ever get a platform where the divider is different, we won't get into trouble Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com>
-
Jerome Brunet authored
Add the hifi pll to the axg clock controller. This clock maybe used as an input of the axg audio clock controller. It uses the same settings table as the gp0 pll but has a frac parameter allowing more precision. Signed-off-by:
-
Jerome Brunet authored
Add the new HIFI pll to axg clock bindings Signed-off-by:
-
Jerome Brunet authored
Provide an option for the pll driver to round to the rate closest to the requested rate, instead of systematically rounding down. This may allow the provided rate to be closer to the requested rate when rounding up is not an issue Signed-off-by:
-
Jerome Brunet authored
Add the frac parameter for the gp0 pll of the axg and gxl. This allows to achieve rates between the fixed settings provided by the table. Signed-off-by:
-
Jerome Brunet authored
Finding the appropriate settings of meson plls is too tricky to be done entirely at runtime, using calculation only. Many combination of m, n and od won't lock which is why we are using a table for this. However, for plls having a fractional parameters, it is possible to improve on the result provided by the table by calculating the frac parameter. This change adds the calculation of frac when the parameter is available and the rate provided by the table is not an exact match for the requested rate. Signed-off-by:
-
Jerome Brunet authored
After testing, it appears that the gxl (and axg) does not require the special locking/reset loop which was initially added for it. All the values present in the gxl table can locked with the simple lock checking loop. The change switches the gxl and axg gp0 back to the simple lock checking loop and removes the code no longer required. Signed-off-by:
-
Jerome Brunet authored
Poking CNTL first may take the PLL out of reset while we are still applying the initial settings, including the filter values initialization. This is the case for the axg and gxl gp0 pll. Doing this poke last ensures the pll stays in reset while the initial settings are applied. Signed-off-by:
-
Jerome Brunet authored
Add the missing frac parameter to the meson8b fixed_pll. It seems to be always on this platform, so the rate remains unchanged Signed-off-by:
-
Jerome Brunet authored
On gxbb and axg, try to get the hhi regmap from the parent DT node, which should be the HHI system controller once the necessary changes have been made in amlogic's DTs Until then, if getting regmap through the system controller fails, the clock controller will fall back to the old way, requesting memory region directly and then registering the regmap itself. This should allow a smooth transition to syscon Signed-off-by:
-
Jerome Brunet authored
meson8b cpu_clk has been replaced by a set of divider and mux clocks. meson_cpu_clk is no longer used and can be removed Acked-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
-
Jerome Brunet authored
Instead of migrating meson cpu_clk to clk_regmap, like the other meson clock drivers, we take advantage of the massive rework to get rid of it completely, and solve (the first part) of the related FIXME notice. As pointed out in the code comments, the cpu_clk should be modeled with dividers and muxes it is made of, instead of one big composite clock. The cpu_clk was not working correctly to enable dvfs on meson8b. It hangs quite often when changing the cpu clock rate. This new implementation, based on simple elements improves the situation but the platform will still hang from time to time. This is not acceptable so, until we can make the mechanism around the cpu clock stable, the cpu clock subtree has been put in read-only mode, preventing any change of the cpu clock The notifier and read-write operation will be added back when we have a solution to the problem. Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
-
Jerome Brunet authored
The mpll clock is a kind of fractional divider which can gate. When the RW operation have been added, enable/disable ops have been mistakenly inserted in this driver. These ops are essentially a poor copy/paste of the generic gate ops. This change removes the gate ops from the mpll driver and inserts a generic gate clock on each mpll divider, simplifying the mpll driver and reducing code duplication. Signed-off-by:
-
Jerome Brunet authored
Rework meson pll driver to use clk_regmap and move meson8b, gxbb and axg's clock using meson_clk_pll to clk_regmap. This rework is not just about clk_regmap, there a serious clean-up of the driver code: * Add lock and reset field: Previously inferred from the n field. * Simplify the reset logic: Code seemed to apply reset differently but in fact it was always the same -> assert reset, apply params, de-assert reset. The 2 lock checking loops have been kept for now, as they seem to be necessary. * Do the sequence of init register pokes only at .init() instead of in .set_rate(). Redoing the init on every set_rate() is not necessary Signed-off-by:
-
Jerome Brunet authored
Rework meson audio divider driver to use clk_regmap and move gxbb clock using meson_clk_audio_divider to clk_regmap. Signed-off-by:
-
Jerome Brunet authored
Rework meson mpll driver to use clk_regmap and move meson8b, gxbb and axg clocks using meson_clk_mpll to clk_regmap Signed-off-by:
-
Jerome Brunet authored
Meson clock drivers are using struct parm to describe each field of the clock provider. Providing helpers to access these fields with regmap helps to keep drivers readable Signed-off-by:
-
Jerome Brunet authored
Move meson8b, gxbb and axg clocks using clk_mux to clk_regmap Also remove a few useless tables in the process Signed-off-by:
-
Jerome Brunet authored
Move meson8b, gxbb and axg clocks using clk_divider to clk_regmap Signed-off-by:
-
Jerome Brunet authored
Move meson8b, gxbb and axg clocks using clk_gate to clk_regmap Signed-off-by:
-
Jerome Brunet authored
This change registers a regmap in meson8b, gxbb and axg controllers. The clock are still accessing their registers directly through iomem. Once all clocks handled by these controllers have been move to regmap, the regmap register will be removed and replaced with a syscon request. This is needed because other drivers, such as the HDMI driver, need to access the HHI register region Acked-by:
-
Jerome Brunet authored
aoclk_gate_regmap has been replaced by meson's clk_regmap. It is no longer necessary so, remove it Signed-off-by:
-
Jerome Brunet authored
Drop the gxbb ao specific regmap based clock and use the meson clk_regmap based clock instead. Signed-off-by:
-
Jerome Brunet authored
Meson clock controllers need to move the classical iomem registers to regmap. This is triggered because the HHI controllers found on the GXBB and GXL host more than just clocks. To properly handle this, we would like to migrate HHI to syscon. Also GXBB AO clock controller already use regmap, AXG AO and Audio clock controllers will as well. The purpose of this change is to provide a common structure to these meson controllers (and possibly others) for regmap based clocks. This change provides the basic gate, mux and divider, based on the helpers provided by the related generic clocks Signed-off-by:
-
Jerome Brunet authored
Over time things changes in CCF and issues have been fixed in meson controllers. Now, clk81 is decently modeled by read-only PLLs, a mux, a divider and a gate. We can remove the FIXME comments related to clk81. Also remove the comment about devm_clk_hw_register, as there is apparently nothing wrong with it. Signed-off-by:
-
Jerome Brunet authored
We don't need several loop index variables in the probe function This is far from being critical but since we are doing a vast rework of meson clock controllers, now is the time to lower the entropy a bit Signed-off-by:
-
Jerome Brunet authored
There is no remove callbacks in meson's clock controllers and of_clk_del_provider is never called if of_clk_add_hw_provider has been executed, introducing a potential memory leak. Fixing this by the using the devm variant. In reality, the leak would never happen since these controllers are never unloaded once in use ... still, this is worth cleaning. Signed-off-by:
-
Jerome Brunet authored
The 'dev' pointer is directly available in gxbb and axg clock controller, so consistently use it instead of going the through the 'pdev' pointer once in while Signed-off-by:
-
Neil Armstrong authored
-
- 12 Mar, 2018 8 commits
-
-
Jerome Brunet authored
There is now an helper function to round the rate when the divider is read-only. Let's use it Signed-off-by:
Michael Turquette <mturquette@baylibre.com> Signed-off-by:
Stephen Boyd <sboyd@kernel.org>
-
Jerome Brunet authored
When a divider clock has CLK_DIVIDER_READ_ONLY set, it means that the register shall be left un-touched, but it does not mean the clock should stop rate propagation if CLK_SET_RATE_PARENT is set This is properly handled in qcom clk-regmap-divider but it was not in the generic divider To fix this situation, introduce a new helper function divider_ro_round_rate, on the same model as divider_round_rate. Fixes: e6d5e7d9 ("clk-divider: Fix READ_ONLY when divider > 1") Signed-off-by:
David Lechner <david@lechnology.com> Signed-off-by:
-
Jerome Brunet authored
The mux documentation mentions the non-existing parameter width instead of mask, so just sed this. The table field is missing in the documentation of clk_mux. Add a small blurb explaining what it is Fixes: 9d9f78ed ("clk: basic clock hardware types") Signed-off-by:
-
Jerome Brunet authored
Some clocks may need to initialize things, whatever it is, before being able to properly operate. Move the .init() call before any other callback, such recalc_rate() or get_phase(), so the clock is properly setup before being used. Signed-off-by:
-
Jerome Brunet authored
Add helper functions for the translation between parent index and register value in the generic multiplexer function. The purpose of this change is avoid duplicating the code in other clock providers, using the same generic logic. Signed-off-by:
-
Jerome Brunet authored
Export clk_div_mask() in clk-provider header so every clock providers derived from the generic clock divider may share the definition instead of redefining it. Signed-off-by:
-
Jerome Brunet authored
If we try to determine the rate of a pass-through clock (a clock which does not implement .round_rate() nor .determine_rate()), clk_core_round_rate_nolock() will directly forward the call to the parent clock. In the particular case where the pass-through actually does not have a parent, clk_core_round_rate_nolock() will directly return 0 with the requested rate still set to the initial request structure. This is interpreted as if the rate could be exactly achieved while it actually cannot be adjusted. This become a real problem when this particular pass-through clock is the parent of a mux with the flag CLK_SET_RATE_PARENT set. The pass-through clock will always report an exact match, get picked and finally error when the rate is actually getting set. This is fixed by setting the rate inside the req to 0 when core is NULL in clk_core_round_rate_nolock() (same as in __clk_determine_rate() when hw is NULL) Fixes: 0f6cc2b8 ("clk: rework calls to round and determine rate callbacks") Signed-off-by:
-
Jerome Brunet authored
The orphan clocks reparents should migrate any existing count from the orphan clock to its new acestor clocks, otherwise we may have inconsistent counts in the tree and end-up with gated critical clocks Assuming we have two clocks, A and B. * Clock A has CLK_IS_CRITICAL flag set. * Clock B is an ancestor of A which can gate. Clock B gate is left enabled by the bootloader. Step 1: Clock A is registered. Since it is a critical clock, it is enabled. The clock being still an orphan, no parent are enabled. Step 2: Clock B is registered and reparented to clock A (potentially through several other clocks). We are now in situation where the enable count of clock A is 1 while the enable count of its ancestors is 0, which is not good. Step 3: in lateinit, clk_disable_unused() is called, the enable_count of clock B being 0, clock B is gated and and critical clock A actually gets disabled. This situation was found while adding fdiv_clk gates to the meson8b platform. These clocks parent clk81 critical clock, which is the mother of all peripheral clocks in this system. Because of the issue described here, the system is crashing when clk_disable_unused() is called. The situation is solved by reverting commit f8f8f1d0 ("clk: Don't touch hardware when reparenting during registration"). To avoid breaking again the situation described in this commit description, enabling critical clock should be done before walking the orphan list. This way, a parent critical clock may not be accidentally disabled due to the CLK_OPS_PARENT_ENABLE mechanism. Fixes: f8f8f1d0 ("clk: Don't touch hardware when reparenting during registration") Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Tested-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
- 12 Feb, 2018 3 commits
-
-
Jerome Brunet authored
On axg, the rate of the mpll is stuck as if sdm value was 4 and could not change (expect for mpll2 strangely). Looking at the vendor kernel, it turns out a new magic bit from the undocumented HHI_PLL_TOP_MISC register is required. Setting this bit solves the problem and the mpll rates are back to normal Fixes: 78b4af31 ("clk: meson-axg: add clock controller drivers") Signed-off-by:
-
Yixun Lan authored
According to the datasheet, the od shift of sys_pll is actually 16. Fixes: 78b4af31 ('clk: meson-axg: add clock controller drivers') Signed-off-by:
Yixun Lan <yixun.lan@amlogic.com> [fixed commit message] Signed-off-by:
-
Jerome Brunet authored
The fixed_pll also has a fractional part. On axg s400 board, without this parameter, the calculated rate is off by ~8Mhz (0,4%). The fixed_pll being the root of the peripheral clock tree, this error is propagated to the rest of the clocks Adding the definition of the parameter fixes the problem Fixes: 78b4af31 ("clk: meson-axg: add clock controller drivers") Signed-off-by:
-
