- 27 Aug, 2017 2 commits
-
-
Arnd Bergmann authored
A debug printk statement was copied incorrectly into the new csi1 parser code and causes a warning there: drivers/media/platform/omap3isp/isp.c: In function 'isp_probe': include/linux/dynamic_debug.h:134:3: error: 'i' may be used uninitialized in this function [-Werror=maybe-uninitialized] Since there is only one lane, the index is never set. This changes the debug print to always print a zero instead, keeping the original format of the message. Fixes: 9211434b ("media: omap3isp: Parse CSI1 configuration from the device tree") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Mauro Carvalho Chehab authored
Sphinx 1.6 generates some LaTeX code before each table, starting its own environment before calling tabulary, apparently to improve table layout. The problem is that such environment is incompatible with adjustbox. While, in thesis, it should be possible to override it or to redefine tabulary, I was unable to produce such patch. Also, that would likely break on some future Sphinx version. So, instead, let's just change the font size on bigger tables, in order for them to fit into the page size. That is not as good as adjustbox, and require some manual work, but it should be less sensitive to Sphinx changes. While here, adjust a few other tables whose text is exceeding the cell boundaries. Signed-off-by:
-
- 26 Aug, 2017 38 commits
-
-
Mauro Carvalho Chehab authored
As reported by smatch: drivers/media/platform/qcom/camss-8x16/camss-vfe.c:1136 vfe_release_wm() error: buffer overflow 'vfe->wm_output_map' 7 <= 7 Signed-off-by: -
Mauro Carvalho Chehab authored
Fix those warnings when building on i386: drivers/media/platform/qcom/camss-8x16/camss-csiphy.c:333:22: warning: constant 1000000000000 is so big it is long long drivers/media/platform/qcom/camss-8x16/camss-csiphy.c:339:32: warning: constant 1000000000000 is so big it is long long Signed-off-by: -
Todor Tomov authored
Add abbreviations explanation at the top header blocks in source files. Signed-off-by:
Todor Tomov <todor.tomov@linaro.org> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Todor Tomov authored
Add explanations for VFE's PIX and RDI interfaces. Signed-off-by:
-
Todor Tomov authored
Update the Qualcomm Camera Subsystem driver document with a media controller pipeline graph diagram. Signed-off-by:
-
Todor Tomov authored
Use standard V4L2 control to get pixel clock rate from a sensor linked in the media controller pipeline. Then calculate clock rates on CSIPHY, CSID and VFE to use the lowest possible. If the currnet pixel clock rate of the sensor cannot be read then use the highest possible. This case covers also the CSID test generator usage. If VFE is already powered on by another pipeline, check that the current VFE clock rate is high enough for the new pipeline. If not return busy error code as VFE clock rate cannot be changed while VFE is running. Signed-off-by:
-
Todor Tomov authored
Update the Qualcomm Camera Subsystem driver document for VFE scale and crop modules support. Signed-off-by:
-
Todor Tomov authored
Add crop module configuration support to be able to apply cropping. Signed-off-by:
-
Todor Tomov authored
Extend selection ioctls to handle cropping configuration. Signed-off-by:
-
Todor Tomov authored
Add scaler module configuration support to be able to apply scaling. Signed-off-by:
-
Todor Tomov authored
Add compose selection ioctls to handle scaling configuration. Signed-off-by:
-
Todor Tomov authored
Add support for horizontal and vertical frame padding. Signed-off-by:
-
Todor Tomov authored
Update Qualcomm Camera Subsystem driver document for the PIX interface and format conversion support. Signed-off-by:
-
Todor Tomov authored
Use VFE PIX input interface and do format conversion in VFE. Supported input format is UYVY (single plane YUV 4:2:2) and its different sample order variations. Supported output formats are: - NV12/NV21 (two plane YUV 4:2:0) - NV16/NV61 (two plane YUV 4:2:2) Signed-off-by:
-
Todor Tomov authored
Add Makefile and update platform/Kconfig and platform/Makefile to enable building of the QCom CAMSS driver. Signed-off-by:
-
Todor Tomov authored
These files implement the platform driver code. Signed-off-by:
-
Todor Tomov authored
These files handle the video device nodes of the camss driver. Signed-off-by:
-
Todor Tomov authored
These files control the VFE module. The VFE has different input interfaces. The PIX input interface feeds the input data to an image processing pipeline. Three RDI input interfaces bypass the image processing pipeline. The VFE also contains the AXI bus interface which writes the output data to memory. RDI interfaces are supported in this version. PIX interface is not supported. Signed-off-by:
-
Todor Tomov authored
These files control the ISPIF module which handles the routing of the data streams from the CSIDs to the inputs of the VFE. Signed-off-by:
-
Todor Tomov authored
These files control the CSID modules which handle the protocol and application layer of the CSI2 receivers. Signed-off-by:
-
Todor Tomov authored
These files control the CSIPHY modules which are responsible for the physical layer of the CSI2 receivers. Signed-off-by:
-
Todor Tomov authored
Add a document to describe Qualcomm Camera Subsystem driver. Signed-off-by:
-
Todor Tomov authored
Add an entry for Qualcomm Camera subsystem driver. Signed-off-by:
-
Todor Tomov authored
Add DT binding document for Qualcomm Camera subsystem driver. CC: Rob Herring <robh+dt@kernel.org> CC: devicetree@vger.kernel.org Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Sakari Ailus authored
These formats are compressed 12-bit raw bayer formats with four different pixel orders. They are similar to 10-bit variants. The formats added by this patch are V4L2_PIX_FMT_SBGGR12P V4L2_PIX_FMT_SGBRG12P V4L2_PIX_FMT_SGRBG12P V4L2_PIX_FMT_SRGGB12P Signed-off-by:
-
Gustavo A. R. Silva authored
Call function v4l2_m2m_dst_buf_remove_by_buf() instead of v4l2_m2m_src_buf_remove_by_buf() Addresses-Coverity-ID: 1415317 Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by:
Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by:
Hans Verkuil <hansverk@cisco.com> Cc: <stable@vger.kernel.org> # for v4.13 Signed-off-by:
-
Colin Ian King authored
The calculation of the left volume looks suspect, the value of 0x1f - ((val << 8) & 0x1f) is always 0x1f. The debug prior to the assignment of value[1] prints the left volume setting using the calculation 0x1f - (val >> 8) & 0x1f which looks correct to me. Fix the left volume by using the correct expression as used in the debug. Detected by CoverityScan, CID#146140 ("Wrong operator used") Fixes: 850d24a5 ("[media] em28xx-alsa: add mixer support for AC97 volume controls") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Arvind Yadav authored
videobuf_queue_ops are not supposed to change at runtime. All functions working with videobuf_queue_ops provided by <media/videobuf-core.h> work with const videobuf_queue_ops. So mark the non-const structs as const. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
-
Arvind Yadav authored
videobuf_queue_ops are not supposed to change at runtime. All functions working with videobuf_queue_ops provided by <media/videobuf-core.h> work with const videobuf_queue_ops. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
videobuf_queue_ops are not supposed to change at runtime. All functions working with videobuf_queue_ops provided by <media/videobuf-core.h> work with const videobuf_queue_ops. So mark the non-const structs as const. Signed-off-by:
-
Bhumika Goyal authored
Make this const as it is only used in a copy operation. Signed-off-by:
Bhumika Goyal <bhumirks@gmail.com> Signed-off-by:
-
Bhumika Goyal authored
Make this const as it is only used in a copy operation. Signed-off-by:
-
Stanimir Varbanov authored
This change the alignment restriction for output type of buffers only, also set corect input resolution and fill bidirectional vb2 queue flag in order to map output type buffers read/write. The last is needed by encoder firmware to add padding at the bottom of output (input buffers). Signed-off-by:
-
Stanimir Varbanov authored
This change is intended to give to the v4l2 drivers a choice to change the default behavior of the v4l2-core DMA mapping direction from DMA_TO/FROM_DEVICE (depending on the buffer type CAPTURE or OUTPUT) to DMA_BIDIRECTIONAL during queue_init time. Initially the issue with DMA mapping direction has been found in Venus encoder driver where the hardware (firmware side) adds few lines padding on bottom of the image buffer, and the consequence is triggering of IOMMU protection faults. This will help supporting venus encoder (and probably other drivers in the future) which wants to map output type of buffers as read/write. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Hugues Fruchet authored
Implements g_/s_selection crop support by using DCMI crop hardware feature. User can first get the maximum supported resolution of the sensor by calling g_selection(V4L2_SEL_TGT_CROP_BOUNDS). Then user call to s_selection(V4L2_SEL_TGT_CROP) will reset sensor to its maximum resolution and crop request is saved for later usage in s_fmt(). Next call to s_fmt() will check if sensor can do frame size request with crop request. If sensor supports only discrete frame sizes, the frame size which is larger than user request is selected in order to be able to match the crop request. Then s_fmt() resolution user request is adjusted to match crop request resolution. Signed-off-by:
Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by:
-
Hugues Fruchet authored
Uniformize "pixfmt" variables to "pix". Change "current_fmt" & "dcmi_fmt" variables to variables with "sd_" prefix to explicitly refer to subdev format. Signed-off-by:
-
Hugues Fruchet authored
Simplify bits handling of DCMI_CR register. Signed-off-by:
-
Hugues Fruchet authored
Test cookie return by dmaengine_submit() and return error if any. Signed-off-by:
-
